Beeman Underlever Suppressor Installation and Test

[@BuckRailAirguns]

If you're just looking for the side by side comparison go to 7:05...

[@heithwatkins]

I would prefer a decibel meter. It's hard to determine on video.

[@datplaybeezy]

I had been looking for an entry pcp for months. Found the beeman and people seem to love it other than the bark. And this thing barks. Literally, the buck rail suppressor and barrel band have turned this into a backyard friendly, squirrel dispatching machine!

[@jeremyblackwater439]

Did you have to work on it?

[@jakesdronelife6307]

My wife has ordered me this air rifle for my birthday. I am glad I found this video. I will be ordering one of the suppressors. Thank you for the information and for the content!!👍🏻

[@jeremyblackwater439]

Did you receive the rifle? How do you like it?

[@ronaldpokorny278]

Cool wife!!!

[@murfspop]

Terry, all your products have been first rate and sure make air gunning a lot more fun. One of my favorites is the Diana Bandit conversion.

[@murfspop]

Please check yur e-mail. I need more 'stuff'. : )

[@RedCornOutdoors]

Very nice set up, very quiet and you said the most important thing fun to shoot 👍happy plinking

[@BuckRailAirguns]

Thank you very much!

[@wyrick6869]

I was on the fence on buying my first Air Gun ! No pun intended, But I think I’ll pull the trigger on this guy👍🏻 Thanks to your informative

[@DavidSmith-dt9xy]

New subscriber here, waiting for my Beeman Commodore.22 to arrive. I am newbie to the “air gang” and anticipation and awe with your content is off the chart. Researching various entry level rifles, Beeman was a first choice and deeper research found the regulated (1362) was now available, I pulled the trigger on yesterday 😊👏🏾. Looking forward to future reviews on this model.

[@mojoteq]

1362 isn't regulated, but the 13625 is

[@barryshank9126]

Nice video love your products just ordered the suppressor for my 1322 and 1377 keep doing what you're doing

[@ebonicsgaming5740]

Got to say thank you I love how good this works I've got. 22 beeman underlever

[@StylewizeTV]

Placing my order this weekend!!!! Can't wait to do business with you!!!

[@BuckRailAirguns]

Thank you!

[@Johnny_s766]

Yeah. I'm definatly getting. A 1358. Looks to be a decent bullpup. Not as high dollar as the bullboss. Or the gladius. & a good looking little rifle too. I've never owned an underlever before so this will be new to me. But I really like it ! Good squirrel & rabbit gun

[@BuckRailAirguns]

It’s an underrated airgun for sure. I think it’s great small game hunting and shooting off-hand. I’d like to make a lighter weight stock for it eventually. It’s a bit on the heavy side.

[@Johnny_s766]

@BuckRailAirguns I got an 8 lb rifle. A 9 lb rifle & a 10 lb rifle with scope on it plus sling. So a 4 to a 7 lb rifle should be a breeze for me. . ..probably comfortable ... & the shorter status of the entire rifle. Is good for just laying in the truck seat on the way to the rabbit grounds with out having to pad down the rear seat to keep scope from being bumped around. Got that problem with long barrel rifles . They take up space ... good for that distance shot. But I don't make alot of distance shots. I'm mostly a 30 to 60 yard guy myself on rabbits & what not. Sometimes it only requires 20 yd shot to get a. varmint. Break out the bigger boys for the cyoteys. But the smaller varmints. The. 1358 will put them away I'm sure. At a close range ...somewhat compact. At least more than a full size rifle .

[@Johnny_s766]

Man. I had to watch your video again. I wanted to see & hear that little rifle again . This morning before I go to work. I got my order in yesterday. But they won't be back in stock before. 12. 5 23. But I got my order in. So now we just wait it out painfully ..hahaha. going to be a blast. I'm sure. We can rabbit hunt till end of January !! put some meat in the freezer & have some gun fun doing it. Good video. Man. I enjoyed it twice. THANKS FOR SHARING YOUR NEW TOY. ! YU GOT ME SOLD !

[@bobkaley432]

@@Johnny_s766 The 1358 weighs 10 pounds!

[@joedokes8641]

If you remove the stock you'll find out most of the weight comes from the material used in manufacturing , that is metal . Not made from these high tone alloys that the expensive ones are . They had to cut cost somewhere ? I was surprised how much the action weighed ? Very solid .

[@guillermocastilla6305]

Great work brother I hope you had a coupon to buy the silencer in the rail all at once or a discounted price❤🎉

[@gboutdoors5198]

i got the suppressor it looks awesome cant wait to test it out

[@eddiecahall3824]

Nice. I kept telling everyone moderators change impact point! I wrote it on the sale site. The moderator does change decibels but it's still got a slight crack. I tried all calibers for the buck n rail moderators. The lowest tone came from .25 cal. 177 was still pretty loud and .22 cal just slightly less than .177. Nosey neighbors won't like it tho. It echoes pretty good. But doesn't have a 22 rimfire crack after installment of the buck n rail. 177 has the most noise. I did like that the beeman moderator took the crack sound away is all. If you live on a farm it's not bad. If your pesting it isn't a good idea with the buck rails moderator.It does scare the birds and rats etc. Especially in a closed in area. Next ima try the barrel clamps and see the truth with those. I've already ordered and also got the Terminador airguns and outdoors AVA style lock down grommets/ harmonics kit to install inside the barrel shroud on the actual barrel to stop POI shifting! That along with the buck rails barrel clamps! Sir Mr buck rail you should try to see about making the grommets discs for the inside shrouds on the Air Venturi Avenger rifles. It takes 4 little discs to slide on the barrel to stiffen it so the barrels don't shift inside and improves accuracy. You could probably do well selling this! Every AVA owner this is a must have! TY Sir! Ed da pro snippin air man💥💪😎

[@theinfiniteif]

Just ordered one. Can’t wait.

[@geramx0]

How it goes my friend?

[@midwesttacticalair7742]

Great job

[@tatankamanitu]

Very nice video, could you please hang one in which you show how the bemman 1358 is disarmed and armed is that I have a problem with mine, when I shoot it sounds very loud and it does it as if it had a loose or broken spring, a greeting from Tacna Peru South America

[@hassanlittlejohn3284]

Great video. Do you have any tips for how to quiet the kral puncher breaker. I saw a video for a quiet kit that doesn't seem to be available anymore.

[@georgerowlands5100]

Hi there i have been looking at different air rifles out there umarex air rifles and gamo air rifles, beeman air rifles all the thesevair rifles that are under $400 and some of them come with a pcp hand pump so you only have to get rifle bag or a rifle case and a ammo and targets and holder for it and in some cases some persons may need a shooting table and shooting aid for target shooting

[@eddieb1766]

I really like the before and after and the shooting tests. Now I'm going to go and try to convince myself I don't need another air rifle or more of your products. 🤣

[@BuckRailAirguns]

Thank you Sir! I'm sure you don't need another air rifle. But if you lose that argument with yourself you will definitely need some more of my products!

[@eddieb1766]

@@BuckRailAirguns I wasn't completely honest with you. I have a new one on the way already. 🤣 It's a .25 caliber convertered Diana Stormrider. The barrel is a little shorter than the air tube so it's going to require a unique solution to quieten it down.

[@Johnny_s766]

Good luck. I'm addicted

[@vladislavbasuk]

Hello. Good review, thanks. Where did you get such a muffler or how to make it?

[@chrislang5659]

I would really like your input on an integral design for the Daisy 880 that I've been working on. I have many videos on it, but the first shooting video is titled #2 "Testing Phase" I think it works! Your input would be greatly appreciated!

[@BuckRailAirguns]

Hey. I apologize for the delay. That thing looks slick. Very cool. It’s always hard to tell in videos. I just trust my ears.

[@chrislang5659]

@Buck Rail - Custom Airgun Gear thanks for your input. It means a lot. I downloaded a decibel reader on the phone and it showed a difference from 80-60,and no real effect on accuracy! However it wasn't as easy as I thought it would be! So, props to you on all you do for the community, folks really like your products! Do you have anything for the Crossman Legacy? P.S. I learned about you through Nibbs @Walnut and Steel

[@BuckRailAirguns]

@@chrislang5659 very nice! I’ve had a few customers tell us that our Crosman 1077 suppressor works with the 2100 and Legacy 1000. buck-rail.com/product/crosman-1077-silencer-kit/ If it doesn’t work for you, just let us know and we’ll take care you. We don’t have any other accessories for that one, yet. -Terry

[@chrislang5659]

@@BuckRailAirguns I'll check the link!

[@heithwatkins]

Does the position of the bipod affect the accuracy? Id try the test without the bipod, while resting the wood stock on bags. It would seem that any torque on a bipod attached to the barrel shroud would change POI.

[@BuckRailAirguns]

I haven’t had any issues with accuracy, but I’m only shooting out to 15 yards. I understand what you’re saying though. The barrel band would need to move in order to shift POI. I had that issue with my first prototype for the Benjamin Akela barrel band. It would feel very sturdy until you put an 8 to 10 inch lever(Bipod) on it and the slightest torque would shift POI. I tightened the clearance and added the barrel band and that issue went away. The Akela’s barrel is thinner and sticks out much further without any support. The Beeman barrel is very thick and is clamped in the optics Rail midway.

[@JJonescaraudio1]

Yes,yes,yesity,yes!

[@BuckRailAirguns]

Agreed😄

[@jsteeves79]

Can you make a barrel band, upgrade air stripper, and a suppressor system that also vents into the shroud for an Umarex gauntlet?

[@tothepoint4334]

Hello, when will this suppressor be available again?

[@cameronmaxwell5341]

Hey Terry, how's it going? Hey I just ordered a Beeman commodore under lever regulated bullpup.25 caliber can you tell me what suppressor and all the adapters I need exactly thanks

[@BuckRailAirguns]

Howdy. There are two option for the adapters. We offer our Nylon UNI adapter and UNI suppressor here: buck-rail.com/product/beeman-underlever-1357-1358-suppressor/ You would just need to change suppressor caliber to .25 cal before adding it to your cart. We also offer a very nice metal threaded adapter from DonnyFL here: buck-rail.com/product/beeman-underlever-unf-adapter/ That would be compatible with our UNF suppressors or any 1/2-20 UNF airgun suppressor.

[@cameronmaxwell5341]

@BuckRailAirguns thanks for your time and God bless y'all always Amen

[@james-ze2je]

Love mine

[@ezrabrook3993]

I have the 1358, sorta modified. 😆 👍🏻

[@Rafaeld0g]

Nice! Which pellet?

[@dougstringer5358]

Is your web site down? Tried to connect to purchase a moderator and other items, but no connection.

[@rogerthedodger5788]

Forget the gun! What happened to the chicken @ 12:26 ! Are you near Roswell?

[@kevinchan8350]

what scope are you using?

[@assemblydissembly772]

Hey I really need help I have been watching some vids about the Beeman 1357/underlever How is the quality I’m just a little worried about the underlever mechanism Is it gonna hold up?

[@BuckRailAirguns]

I haven’t had any issues. It is very smooth, and can be operated with one finger. It’s not under much of a load or stress.

[@cobaltace62]

Do you need an ATF stamp for the supressor on an air rifle?

[@OldHatefulCracka-zo6sm]

No

[@chrislang5659]

Any options to mount a bipod to the Crossman Legacy? I enjoy the bipod that mounts to the sling swivel!

[@mr.murray8742]

Yes definitely made mine much quieter…

[@GTSoccer3]

Where do you get it where do you buy it?

[@marvinandLevi]

do you ship to the uk

[@gboutdoors5198]

hey i have a question the suppressor says 1357/1358 does that mean the suppressor can be put on a 177 cal beeman and a 22 cal beeman?

[@BuckRailAirguns]

Yes. The model 1357 is 177 and the model 1358 is 22. There will be a model 1359 that is 25 cal as well and it will work with that. This suppressor has been replaced with a polymer adapter and suppressor combination.

[@gboutdoors5198]

@@BuckRailAirguns ok thanks i was just wondering my friend asked me if he could try the suppressor on his 22 version of the Beeman and i have the 177 cal version of the Beeman and i did not think it would fit so thats cool basically two in one it fits 177 and 22 thats awesome i love your stuff buckrail

[@keithclark3103]

What the name of the scope you’re using & where did you purchase

[@BuckRailAirguns]

This is a scope that I used to sell. 2-6x32 AOEG. It’s the same thing as this: www.amazon.com/Lancer-Tactical-2X-6X-Green-Illuminated/dp/B072JQPPKQ

[@michaelsalcido3736]

@@BuckRailAirgunsFYI: The link to the scope is broken.

[@gboutdoors5198]

hey do i have to buy an adaptor for it or do i just buy the suppressor by itself

[@BuckRailAirguns]

Hello. I apologize for the confusion. The suppressor featured in this video is discontinued. It was prone to breakage, so I replaced it with an adapter/suppressor combo. The weak spot was the portion that fits inside the shroud. That part is now manufactured in a tougher material as a threaded adapter that is compatible with our UNI Suppressor. You will need the adapter and suppressor. You can choose between the tapered smaller OD suppressor and the non-tapered larger OD suppressor. All that you need is at this link: buck-rail.com/product/beeman-underlever-1357-1358-suppressor/

[@gboutdoors5198]

@@BuckRailAirguns would i get the non tapered or the tapered? what do you think is better

[@BuckRailAirguns]

@@gboutdoors5198 They both work well enough for backyard use, but I prefer the non-tapered for most pcps, including the underlever. I usually set the one a think is best as the default.

[@gboutdoors5198]

@@BuckRailAirguns alright thanks alot cant wait to test it out

[@WW5RM]

Chicken says: Suppressor? You dont need no stinking suppressor! =]

[@BuckRailAirguns]

They don’t have the best judgment. They’re city chickens…

[@bobkaley432]

So if i buy the suppressor is it ready to install right to my stock barrel?

[@BuckRailAirguns]

The design was changed after I published this video. There are two parts now. An adapter and a threaded suppressor. The adapter threads directly onto the barrel. It replaces the OEM baffles in the shroud. You’ll need to buy the suppressor as well to thread onto the adapter.

[@bobkaley432]

@@BuckRailAirguns where can I buy the male 1/2-20 UNF threaded part to add the suppressor? Nobody has them. Thanks

[@BuckRailAirguns]

@@bobkaley432 I’m sorry about that. I have more coming in on Monday.

[@joedokes8641]

donnyFL .

[@bobkaley432]

@@joedokes8641 they back in stock?

[@1776adb]

What pellets are you using?

[@gboutdoors5198]

he is using crosman Priemer hollow points

[@golfpartner1]

How much would this mod and adaptor be including postage to uk, Thanks

[@BuckRailAirguns]

Postage to UK is $14-16USD for most small items. If you place the item in your cart and input your location it will give you the total before checking out.

[@golfpartner1]

@@BuckRailAirguns hi I have looked on your website and it doesn’t give me the provision to enter my full address , only I wouldn’t want it delivered to wrong address , I live in Hayle, Cornwall

[@BuckRailAirguns]

@@golfpartner1 understood. I’m sorry for the troubles. I’m not the best web developer. The website only needs to know what area you are in to give you a shipping quote and order total. It doesn’t need the full address for that. When you checkout it will give you an opportunity to put in your full address for shipping purposes. Alternatively, you can reach out to our customer service person with your details and what you want and he can get your order in for you. For customs purposes he will need your phone number as well. You can email Chris at [e-mail]

[@santosalmeidadelrosario6060]

Excelente rifle amigo felicidades

[@OldNavajoTricks]

Whoa.

[@PP.EKOTECH]

GOOOD JOB !!! :) + SUB ;) Regards - Paul

[@BuckRailAirguns]

Thank you! Cheers!

[@chulopapi2300]

Is that a chicken run in the background⁉️ Does it work well⁉️

[@BuckRailAirguns]

Yes Sir! That’s our chicken tunnel. They go through it to lay under my 3D printing shed to get cool in the heat. Works great for the chickens and we enjoy seeing them go back and forth throughout the day.

[@Relaxbadkneeadventures]

🇳🇱😉👍

[@geronimemo]

your testing videos on the suppressors would be a lot better if you just shoot the gun instead of taking aiming shots after shots no disrespect but it is a waste of time

[@BuckRailAirguns]

“Wasting time aiming shots… an ironic critique of modern commenting.” Sounds like an old-timey book title. That’s some good stuff right there. Thank you.

[@BuckRailAirguns]

P.S. 7:05

[@sidewinder860]

its the exact same sound lmaoo... nothing is suppressed

[@BuckRailAirguns]

No

[@sidewinder860]

@@BuckRailAirguns I know

[@BuckRailAirguns]

@@sidewinder860 I’m genuinely sorry bout your ass though.

[@sidewinder860]

@@BuckRailAirguns Not as sorry as your "Suppressor" snowflake

[@BuckRailAirguns]

@@sidewinder860 lol. Good chat.