Huben GK1 v3 Grip Adapter - Installation

[@AARRAcer]

You guys are killing me! These Airguns are getting better every day! Just ordered my first PCP gun a couple weeks back, can’t wait to get it…. Only downside is that I’m going to have to open another bank account to support the purchases that I plan on making!😂😂 This is a very well thought out design! Probably the best I’ve seen on any gun.

[@BuckRailAirguns]

😆thank you!

[@michaelpurdy5908]

Thanks for this! I finally got it together and it’s super sturdy! Thanks for all your help and awesome customer service!

[@sallutz]

Amazing. Just what I was looking for, for my new gk1 ordered today.

[@johnphillips7444]

Love my Gk1 with this Grip adapter

[@unboundvision]

Wow... It's so, modern. But in a really good way. ❤

[@eze008]

Yep. This is what the fuck i want. You might as well make that mlock handgard with a rail system. I knew when they made the pistol it was a matter of time for this. Now I hope a full auto GK1 is in the making.

[@BuckRailAirguns]

I have an electronic full-auto design for the GK1. The only issue is that I’m still trying to figure out how to expand the magazine. It would be awesome if there was a way to replace the mag with a gear that feeds a TPU belt. Someone smarter than me needs to figure that out.

[@JohnVentarino-ey5ln]

I like your design the best

[@BuckRailAirguns]

Thank you! Cheers!

[@shaned7545]

I hope I will see a Huben w/ a Steyr evo10 grips for better handling

[@pelletshoter]

You making awesome job 👍

[@ricko2766]

That's awesome. Can't we have one for the umarex notos?

[@BuckRailAirguns]

Yeah, I think I should have gone with the rear pic on the Notos. I’ll be making these commercial grade nylon parts in-house soon. Once we have the equipment set up I’ll likely make this an option for the Notos as well.

[@jerrycripps4750]

Very helpful

[@豪帅帅]

How can we ensure that the firing wheel rotates every time GK1v3 is activated, instead of remaining stationary?

[@vinceywinceyspider]

Where can I get the last one that you designed. I'm in the uk though. Thanks

[@BuckRailAirguns]

Hello. Thank you for your interest. Those can be found here: buck-rail.com/product/qd-adjustable-stock-adapter/

[@JohnVentarino-ey5ln]

It looks awesome buddy how much are the 25 caliber Hueban pistols going for now my friend.

[@BuckRailAirguns]

$1300 to $1700. Pretty wild for a made in China gun, but it is one of the coolest airguns on the market.

[@JohnVentarino-ey5ln]

@@BuckRailAirguns why is there such a gap from 13 to 1700. What is the gain from the 1700 dollar pistol to the 1300 one.

[@Leelandz]

Sick!!

[@BuckRailAirguns]

Thank you!

[@jerrycripps4750]

The music is very distracting for me. Thank you for the informational video

[@onemac-ly6bo]

what is the second stock in this video please

[@BuckRailAirguns]

The adapter and stock tube are from Midwest Industries. We sell those here: buck-rail.com/product/mi-stap-2/ The Buttstock is from Strike Industries. It’s called the MOD 2. It’s very well made and one of the most solid adjustable buttstocks I’ve tested.

[@jbhk7977]

you have an address in Europe for these items?

[@Jeeper1378]

Anyone with a v3 confirm you got it to work?

[@Jeeper1378]

Where you get the foam for the case?

[@BuckRailAirguns]

We buy it in bulk from ULINE, but it can be purchased in small quantities or custom cut sizes from Case Club at pretty reasonable prices. I believe they sell it on Amazon as well. You can just search for “convoluted foam”.

[@Jeeper1378]

@@BuckRailAirguns thanks, i had a large rifle case i no longer used. Cut a piece from it.

[@rodrigobautista9387]

Donde puedo comprarlo?

[@WarnerDev]

Does it include the actual grip?

[@BuckRailAirguns]

It can be purchased with or without a grip. If you’re in the US there’s a bunch of Magpul grip choices at checkout.

[@Relaxbadkneeadventures]

Nice 😉👍🇳🇱

[@dinogiolitti2844]

What optic mount is that?

[@BuckRailAirguns]

That’s a slick little mount from @Huben3DParts Find them here: huben3dparts.com/products/huben-gk1-rear-sight-mount-original

[@zitrone2779]

a dream

[@2967575]

What material is that stock adapter made of ?

[@BuckRailAirguns]

It is Selective Laser Sintered PA12 Nylon

[@Jeeper1378]

Omg ty i tried and could not get mine on. Edit .. i give up. After many attempts i can not get mine on. The threads appear to grab something but i believe its threading in the space between the barrel nut and the hole its in. Appears to be tight until i thread in the adjuster screw and it pops off. The angle that i have it just too Extreme… the threads dont come close to the nut until the head is within the counter bore.. essentially forcing it straight again. I can get the oem longer screw to thread but its too long obviously. Its about 2.61 from the top of the gun to the top of the trigger lever. Without the assembly on The threads will just grab pretty much even with the trigger lever. That lever sits under the assembly.. obviously. The counter sink for the bolt head prevents me from trying to angle it. It wants to straighten it and then the barrel nut rotates and then it grabs the side of it making it seem tight but its not.

[@BuckRailAirguns]

Sorry you couldn’t make it work. I may have messed something up in yours. Why don’t you reach out to customer service? We can shoot you a replacement or give you your money back or even shoot you a longer screw if you think that’s all it needs. Chris handles all things customer service related. His email is [e-mail]

[@Jeeper1378]

@@BuckRailAirguns i actually have 2 of them because i almost bought a 22 but someone beat me to it. I tried both and neither would work. I was waiting for the video and i posted the edit right after watching it and making another multiple attempts. Glimmer of hope it would work haha. Odd the video made it look fairly easy. Confirmed my gun is a V3 but is no where close with the hole lining up and screw threading at a angle.

[@Jeeper1378]

Update, theres a v3 specific grip now with a angled hole. Received a replacement and this one works great.

[@ukqwerty999]

@@Jeeper1378 Cool. Enjoy :)

[@zitrone2779]

i love the big Huben but the smal is sooooo compackt ! O_= with almost the same power. the adapther maks she shiny.

[@user-dl1cf4xr6t]

Really sexy with that folding stock...!

[@kimthesax]

Does any one ship this to Norway?

[@BuckRailAirguns]

We do ship to Norway. There are just certain parts we can’t export such as the Magpul grips.

[@GshsjshshsFshshagsh]

Tôi ở Việt Nam có mua được không vậy

[@HaiTrung1]

Can I buy this gun and ship it to VIETNAM??

[@whale1805]

Hello, nice to meet you, friend. I really want to buy a tow scale back rest but since I am in my country China. China is a country with very strict laws. Unfortunately, I can't buy it. Do you have a drawing of this part? If so, can you send it to me? I really, really like this. Thank you so much. If not, that's okay. Wish you all the best.

[@56newsmedia]

What does V3mean? Someone

[@BuckRailAirguns]

V3 is referring to the version of the Huben GK1 Pistol. It should say on the side of the airgun if it is v1, v3, etc.

[@56newsmedia]

@@BuckRailAirguns so is a v1 better than v3

[@jeremielibraty7]

Ok so I ordered one and the trigger once installed gets stuck therefore the semi auto does not work. This design needs to be in machined aluminum. Gogun sent me and other trigger assembly only for it to do the same exact thing. I’m honestly very disappointed and absolutely and utterly would not recommend this adapter.

[@BuckRailAirguns]

Machined aluminum would be great. We’ve shipped quite a few of these all over the world and I’ve tested these on three GK1s. However, a few folks have experienced the same thing as you. Not sure what causes that. It may be a difference in the sheet metal trigger linkage that I’m not aware of. The aluminum thing is not going to happen for such a complex part, but the answer might be for us to make a smoother and more consistent trigger linkage or make adjustments to the geometry when a brave soul is willing to send us theirs when they have an issue so we can investigate and solve, etc. You should at least reach out to customer service and get your money back.

[@paulaeaston6915]

Sounds like shis