BEFORE DOING NITROUS ON YOUR HEMI WATCH THIS HP GAINS? TUNING COST? HOW DOES IT WORK?

[@DarrensTruckzs]

Hey fella.. great video that was really neat man .. an you were very informative an easily understood about the differences of the nitros or supercharger.. I really like your intro it’s well done an shows off your truck well .. 👍

[@FrostbiteRam]

Thanks 🍻

[@BADHEMI300s]

Hell yeah my man frostbite some dirty south love Atlanta stand up!!! New goodie for my build coming soon

[@FrostbiteRam]

ATL🤙🍻

[@bdogjr7779]

Awesome Guys《☆》Nitrous really does sound like the best option for a budget power adder but as you mentioned about setting everything up properly for the safe use is key in not doing damage🔲🤓☻🤠🔲✖➗➕

[@rtkl13]

Also for going the direction of a blower, the installation is much more involved

[@FrostbiteRam]

Definitely

[@NotThisGuy12]

Trucks looking good bro, I might swing by your place soon. I just got back into another 5.7l, it's not a truck this time 😁

[@bmanclassics4350]

Jus goin through old vids you've came along way bro💪🍻 hope I can set the bar one day like u have....

[@FrostbiteRam]

Thanks bro, we all have to start somewhere and I'm still learning.

[@bmanclassics4350]

@@FrostbiteRam if there comes a day where u say u aren't learning then you've become obsolete ☺️ hey speaking of that...can I fit a newer intake manifold off of a newer gen 5.7 on my old 5.7???

[@FrostbiteRam]

@@bmanclassics4350 I believe if you change the heads it will work but not 100%

[@bmanclassics4350]

@@FrostbiteRam welp not changing the heads ☺️ I jus had these done new valves ported and polished I jus saw the manifold on the floor and was like Justin? Is that thing new.?.. he said yeah but I don't need it..see if it'll fit yours ..but by the time I got the headers on I had to leave so thought I'd hit you up and ask to save some time...I had hope after seeing Nick put that 392 manifold on his 5.7 😅...

[@bmanclassics4350]

@@FrostbiteRam I'm prob jus gonna take mine off clean port and polish it

[@ShadyOne9]

I know this video is old but any recommendations for the plugs for a 100 shot max? I hear guys are running the Denso 3381’s but NX recommends the Brisk’s. Thanks love the channel

[@FrostbiteRam]

One step colder is good I personally ran 3381s also whith no problem

[@johnmorton7202]

i cant wait for my 2d ram im in ga 2 friday night gon be fun in 2021

[@briangarcia1946]

Do you NEED a bottle heater? And is purge valve NEEDED? What would happens when you go without both?

[@FrostbiteRam]

You don't need either. However a warmer is nice if it's below 80

[@Ian-xw1ge]

What are the pros and cons of having a nitrous system in your truck or car? I have a 392 Six speed Challenger.

[@FrostbiteRam]

Pros is it makes you fast for cheap and is very safe if used correctly just like boost. Cons is it runs out so you have to refill.

[@highflysugar]

Great Channel.. Keep them coming!!

[@FrostbiteRam]

Thanks man🍻

[@micahbrown8259]

I just purchased a nitrous outlet plate kit for my 17 Mustang Gt the car has already ran low 11s n/a what do u think it will turn with a 150 shot

[@FrostbiteRam]

Should go solid 10s for sure

[@jralvarez8971]

Hey man do you have a link of a complete set up looking to nos my truck thank you

[@FrostbiteRam]

Link in video description

[@GarcBomber]

Great stuff, one question that was not in-depth enough. How was Jay with prices to tune and dial in your various hp shots? Are you just using your diablo device with the wideband?

[@FrostbiteRam]

Jay's nitrous tune is $75 on top of his standard custom tune for na.

[@GarcBomber]

@@FrostbiteRam His prices have recently increased, but that is still a bargain if he will revise the tune to change shot sizes or 2-stage for no charge.

[@richardegan726]

Rule is 2 degrees of timing per 50 shot????

[@eb972]

I spray 250 on a all forged 5.7. 2015 charger rt w hellcAt diff. Runs low 11’s. Most important..RING GAP.

[@FrostbiteRam]

That's sounds like fun but yea ring gap for sure when you get to that level

[@eb972]

I’m on the NX maximizer5. Wired to the wideband. Turns out that my fuel system could not support the fuel for a 250 shot so the Max5 pwm the solenoids to pull nitrous out since the fuel wasn’t there. ( awesome unit for failsafes) Upgraded the fuel system but season looks to be over here in Iowa. Fingers crossed for another day at the track for 2019. Hoping to feel the full 250. .

[@toddsobozak3887]

Jeeze 11s with a 250 on a forged 5.7 I went faster with a stock ls1 on a 150

[@eb972]

Todd Sobozak 4330 without me in it.

[@toddsobozak3887]

Yea the weight will get ya

[@briansolis7295]

If I have fastman tb do I have to get a different plate system?

[@FrostbiteRam]

I believe nitrous Express has 2 different plate sizes stock and bigger bore contact them and ask. Also promo code "frostbite" gets you 5%off anything at nitrous Express.

[@eb972]

How accurate is your jetting? Per NX’s jet chart?

[@FrostbiteRam]

Its pretty close definitely on the rich side so I usually have to drop fuel pill size a little to get right afr

[@briangarcia1946]

@@FrostbiteRamwhat does that mean lol

[@strongfamilyforever5113]

Pay attention ladies n gentleman NY to GA ta TX America is becoming Mopar or no car!!

[@FrostbiteRam]

Definitely mopar or no car 🤘💨💨🔥

[@raysason4838]

Air is allways better it’s on the street

[@mikekosar6135]

💀😱scares crap outa me 😱💀

[@FrostbiteRam]

Nothing to be scared of🤘

[@MoparHollics]

First🤘

[@FrostbiteRam]

Lol if ya not first your last🤣🤣🤣