WHAT IS NITROUS AND HOW TO SETUP NITROUS ON YOUR HEMI

[@b5beast611]

I see nitrous in my future. This was a great video! I will be watching again when the time comes👍👍

[@FrostbiteRam]

Thanks🤙nitrous works and it's fun not to mention it dont break the bank.

[@b5beast611]

@@FrostbiteRam Yeah. I've been doing some research and I have my eye on a kit. Maybe next year after I do some power handling upgrades.

[@MinionnitrousBHPtoBHP]

@@b5beast611 nitrous is a cheep must . U can add 100bhp no problem. And fitting the kit . Well if u can do a Stereo then you can fit a nitrous kit . U will love it . Just keep the bottle psi up to 950 or more . Bottle psi is the key to nitrous. And do go to high to fast in power start on a 25jet but each kit is different so jet size can be different. Good luck try it u will not Regret it.

[@b5beast611]

Mini on nitrous 105BHP to 205BHP Thanks for the info! 👊

[@ghostrt1608]

@@FrostbiteRam... I need those white coil pack covers... where can I get them from

[@robertcorrea8161]

My brother I tip I hat to you , for taking your time to set and explain complete setup and process of the nitrous system and how it works . Thank you I also see myself setting up my Challenger Rt here in the near future thank you Robert

[@FrostbiteRam]

Thanks man🙏🍻

[@backwoodsmisfit5448]

Thanks again for the content man. Kit will be ordered in 2 weeks. 100 shot cant wait. Next year going for the stroker kit for the 5.7. God bless

[@FrostbiteRam]

Thanks for the support bro. That 100 shot is going to be a blast 💨💨🔥🔥👊😜

[@summit265]

Great video knowledge is power thx for going in depth and answering most of the questions and concerns I had once my warranty is gone it’s time to play !!!

[@FrostbiteRam]

Thanks👊

[@MrOnewallatatime]

Thanks Answered some of my questions I’ve been having a difficult time finding the answers too. I have my mopar single fogger kit sitting in the corner just looking at me.

[@FrostbiteRam]

Glad it helped

[@mikeg2455]

Thank you for your information. You answered almost all of my questions.

[@FrostbiteRam]

Awesome

[@mikeg2455]

Thank you, this video really helps me with my install.

[@FrostbiteRam]

Awesome

[@michaeltufano4372]

What a great straight forward and informative video man 👍👍

[@FrostbiteRam]

Thanks

[@kevinhounslow6548]

Very well explained ! Good stuff man 👍

[@IncredibleHemi1111]

I need NOS ,actually 2 of them , n harry I need them by tonight

[@FrostbiteRam]

Right😜🤣🤙

[@the_black_jeep]

Amateurs don’t use nitrous oxide. I’ve seen the way you drive, you got a heavy foot, you’ll blow yourself to pieces.

[@FrostbiteRam]

@@the_black_jeep 🤣😜

[@luffy4evasunny_884]

Great Video, this is why I subscribed.

[@FrostbiteRam]

Thanks for the support 🤘

[@lulujrlaulom7905]

dig your setup.... running a 2017 rt. thanks for posting,.

[@FrostbiteRam]

Thanks 🤙

[@bdogjr7779]

Awesome Frostbite《☆》Thanks for the edumication brother :*: I had to double take the Ram burnout at the beginning :*: 2 guys sitting in the back enjoying the tire smoke🤓☻🤠

[@FrostbiteRam]

Lol yea sideways Bobby gets that truck swinging 😜💨💨💨💯

[@jnichols3rd]

I still need good cam and lifters etc, I'm starting to hear a tick, more than the "hemi acoustical chatter" but nick and I have talked about greene cam and tune several times. So I'm headed in that route next then 100 shot

[@FrostbiteRam]

Right on🤙💨💨🔥🔥

[@cbev599]

Great detail... love the videos. Been an Lsx guy but am buying a 09+ ram now.

[@FrostbiteRam]

Thanks for the support man.

[@BeastModeNetWorkk]

Great vid but I do have one correction. The reason for purging the line, is to be sure raw liquid nitrous does NOT pool in/flood your intake.

[@MIKEDUZZI420]

Where did you get that from? I have heard of that happening if you spray at idle or below 3000rpm. The purge is to guarantee liquid nitrous to the solenoid so when you spray there is no lag. If you had air or gas in the line when your system came on you would go real rich until liquid nitrous started to flow.

[@krhofbauer]

I know people have already asked about using nitrous with a stock motor and you recommend colder plugs and a custom tune for 100 and above. But what about below 100, like a 75 shot? Would you still need a custom tune or not? Currently I have a pulsar but if needing a better tune is a necessity then so be it

[@FrostbiteRam]

You could get away with stock tune with 50-75shot you could run a little race gas for safety

[@pepepoggio9751]

Killer set up sr quick cuestión where can I connect my Air fuel ratio gauge ?? Mine is a 3 wire gauge so 12v ground and to the signal where should I plug that one I try on my o2 sensor downstream but it reads super lean max out thanks

[@FrostbiteRam]

The gauge should come with it's own o2 sensor to plug in.

[@pepepoggio9751]

Frostbite Ram it didn’t I bought the gauge it self so any o2 sensor will work ??

[@FrostbiteRam]

@@pepepoggio9751 they normally come with a o2 that is plug and play.

[@pepepoggio9751]

Frostbite Ram yes I know but I order this gauge without so if I use another sensor will work ?? Also where do u locate your o2 ?

[@FrostbiteRam]

@@pepepoggio9751 the wideband o2 needs to be installed on 1 side of the headers either driver or passenger before any bends in pipe preferably. You may need to get a new wideband that comes with the o2 or find the o2 that goes with your gauge.

[@clutch302tc]

Does your solenoids have to be mounted directly by the TB or can I mount them out of the way on firewall or front strut cross bar. ?

[@FrostbiteRam]

They can be put anywhere

[@kellyavalos5116]

Part number for the solenoid brackets? My hemi plate kit did not come with mounts for the solenoids to be mounted to the throttle body

[@FrostbiteRam]

I found some universal ones from summit

[@yerwrng]

Simple term it's an oxygen donor no need for a long explanation 😅 it being an oxygen donor altitude has no effect on it like n/a power ladder or compressor like turbo or charger it also doesn't need all the parts like them and there's no heat generated like compressing air with charger or turbo so no charge cooler needed .

[@arischason7870]

Great video!! Will this setup work on a stock 5.7 hemi throttle body? My hemi is stock but want to get some extra hp.

[@FrostbiteRam]

Yes I use the stock throttle body

[@enoel060372]

Awesome very informative video!.. Thank you!.. Just one more question.. Where and how and how much does it cost to fill your bottle?.. Thanks again!

[@FrostbiteRam]

kzbin.info/www/bejne/pV7TiYGMm7qrsJY This video answers lots of questions also you may like it. Usually speed shops and welding gas supply stores will sell nitrous and cost about 5$ per pound

[@novaguy383]

Great video, very informative, nice job!

[@FrostbiteRam]

Thanks

[@AngelRodriguez-kw6dx]

Where do you connect the tps wire on a 2014 ram 1500 for zex nitrous?

[@FrostbiteRam]

I used a regular switch on my gas pedal

[@ronan9784]

You should touch on a step colder plugs ..

[@tomjones470]

I know it was three years ago do you know what cia you used thank in advance I ordered my kit yesterday but I have a veraram now but I think the solenoids will be in the way

[@FrostbiteRam]

You can mount the noids anywhere

[@dalegastv8835]

On behalf of the tacuache community you officially a tacuache cuhhh

[@RobbieBTV]

How how did you get that hurst shifter in there.? Was that custom installed??

[@FrostbiteRam]

No you can buy the kit on ebay or other stores.

[@rometorres1084]

Hey I know it’s been 2 years since you did this video but I’m gonna run a 125 shot on my 05 Ram hemi and I wanted to know what spark plugs I needed to run and what do I gap them to ...... thanks

[@FrostbiteRam]

I ran denso copper plugs at about a 30 gap

[@darioavendano369]

Any colder plugs specification? And what is the size of the throttle body spacer thing stock 84mm or 90?

[@FrostbiteRam]

I'm running stock tb and on nitrous I used denso 3381 copper plugs

[@bhbdouge]

I have a 06 srt8 300c cammed and full exhaust and definitely contemplating on purchasing a kit right now as I type I wanted to do 100-150 I know you said good gas and colder plugs but I have a Diablo tuner running on the 91 CAI tune do I need to pull timing or is it fine to run with

[@FrostbiteRam]

Recommend pulling timing with 100- especially 150.

[@bhbdouge]

@@FrostbiteRam so I can use the canned tune pull like 4-6 degrees and run colder plugs n high octane gas and I should be ok until I get a nitrous tune

[@FrostbiteRam]

@@bhbdouge if you do that I would recommend running the 87 tune and pull timing from that tune but run 93 fuel.

[@bhbdouge]

@@FrostbiteRam on my Diablo I only have the mpg booster, the 91,93 and 91,93 CAI TUNE

[@FrostbiteRam]

@@bhbdouge use the 91 tune and pull atleast 4-5 degrees to start with. Run 93 atleast 100 octane would be better if you can find it.

[@tomdavis4972]

Where you hooking afr too? I'm taking it with 4 O2 sensors not replacing one for guage? Hope this makes sense

[@FrostbiteRam]

I welded a bung on exhaust just for afr

[@mooreb596]

What’s the associated with the system? Do you need a special tune system or can you use stock ecu? Did you use colder spark plugs?

[@FrostbiteRam]

With a 100 shot or more you should get a custom tune and step colder plugs

[@nicklausmisiti5204]

is that good for the tires?

[@HemiBze]

Hey man am not sure you will see this but if you do would you send me the link to this kit. I am definitely going to go nitrous . Please let me know

[@714printing]

Will be adding nitrous to my dodge ram (not RT) do you recommend any other upgrades to handle the power or the stock engine can handle it just fine?

[@FrostbiteRam]

100 shot and colder plugs with a tune and your very safe for years of enjoyment.

[@714printing]

Frostbite Ram thanks man love the channel glad I found it.

[@MinionnitrousBHPtoBHP]

Nice set up . U not thinking of putting ypur fuel gauge inside in cab or duz it not bother u.

[@FrostbiteRam]

Thanks, I have a wide band gauge inside so I'm good the fuel gauge is more for testing and tuning the fuel side.

[@MinionnitrousBHPtoBHP]

@@FrostbiteRam a wideband is the way to go . Its a must. What psi u running yoir fuel at . I am at 45psi with my bottle i like 970psi . I no 950 is ok but with a 1:2 ratio it hits well on 970 psi . Amd of course the controller helps it hock. I do run a little rich but i like it that way plus i spray from or off the lights not really top end so running rich as not a bad thing . If i was going to get all the power i would go a bit leener. Can not wait for nice weather again.

[@moosestanggang]

I thought yours had a dual stage option? If so be cool to see you run a small shot out the gate then the bigger shot say after the 60’ be cool to see if it made a difference in time being able to hook and be on the nitrous sooner

[@FrostbiteRam]

It does but I'm running 1 kit right now

[@robertcorrea8161]

One question why do they apply heat to your nitrous bottle before they make a pass.

[@FrostbiteRam]

To get the bottle pressure around 900-1000psi

[@lethalracing5.7]

Thinking of adding nitrous 75 shot or below, what is better for these hemi engines dry or wet shot ? Want to play it safe thanks!

[@FrostbiteRam]

Definitely get a wet kit.

[@OpiTizzle]

Nos is a brand but it's also short for nitrous oxide system

[@FrostbiteRam]

True but God it sounds lame 😒

[@OpiTizzle]

@@FrostbiteRam yeah I agree.

[@jrwoah304]

If 75 shot do you need tune

[@FrostbiteRam]

Not really necessary with good fuel

[@redbaron2448]

The black wire on the relay says to connect to a 12 volt could you just connect that to a 12 volt car battery for power?

[@FrostbiteRam]

Yes

[@RogerJG21]

Great Video Bro. can you come over my place and put this same set up on my 2011 Ram lol

[@FrostbiteRam]

Thanks man🍻

[@ramlyfestyle9285]

Excellent info and very nice and clean setup! I wanted this to be my next mod but my lifters are failing and I have some misfires.. my wideband is all over the place! lol So I'm saving now for the upgraded cam and heads. Then I can focus back on the "NOS"! I have a white CCSB 6spd that I've been modding. You have an IG acct?

[@FrostbiteRam]

Thanks ,yes Instagram is @frostbite_ram

[@gracetabernacleh]

SICK for sure

[@wilsolo1986]

Thumbs up, Awesome!

[@ortegamedrano71196]

What kit are you using ? Wanna add thid to my 14 rt

[@FrostbiteRam]

Should be in the video description but its the hemi plate kit from nitrous express

[@MoparHollics]

Nice🤘

[@MRmwr2452]

Is the all an NX system or piece by piece?

[@FrostbiteRam]

It's a kit

[@MRmwr2452]

Frostbite Ram I have a 2017 Sport. Im gonna see about the Hemi plate kit. Thanks! What tuner and who does your nitrous tune?

[@FrostbiteRam]

@@MRmwr2452 greene racing "jay greene" link is in description.

[@FrostbiteRam]

@@MRmwr2452 also promo code "frostbite" gets you 5%off anything at nitrous Express

[@redbaron2448]

Nitrous Express says you don't need a tune for a hundred shot so the car run safe without a nitrous tune?

[@FrostbiteRam]

There is ways to get around it but a tune is recommended.

[@redbaron2448]

@@FrostbiteRam ok great, thank you

[@MrBass226]

Can you run nitrous with stock spark plugs?

[@FrostbiteRam]

75shot or less you could but not worth the chance.

[@MrBass226]

@@FrostbiteRam I just paid to have them changed 3 months ago it was alot... don't want to pay that price again but I wanted to buy the nitrous kit now I don't know what to do

[@FrostbiteRam]

@@MrBass226 if you stay at 75 with a tune you would be ok

[@luvsthestarz66]

Yo got any nos? Lmao lol j/k. Love the channel

[@jnichols3rd]

Frost I wanna do it but I'm skeert!

[@FrostbiteRam]

Dont be it's safe if you follow the instructions and rules bro🤙

[@jnichols3rd]

I know it's not too complicated with the correct tune and 100 shot should be fine, but lean scares me

[@redbaron2448]

You're in the red zone too much pressure on the bottle 1300 or 1400 PSI what would be the best way to Cool/ drop the bottle pressure to 900 to 1000 PSI, cold towel, ice etc. ?

[@FrostbiteRam]

Purge it down or lower the bottle temperature

[@redbaron2448]

@@FrostbiteRam dont have a purge system, so how to cool bottle down

[@FrostbiteRam]

@@redbaron2448 put it in a cooler of ice for a little bit

[@redbaron2448]

@@FrostbiteRam ok thanks,

[@elgamazacatecas6670]

Hows much is a full kit on this nitrous...bro..

[@FrostbiteRam]

The plate kit is about 800 I believe link should be in video description

[@CodyandCodyTV]

so no need for a progressive controller then huh?

[@BeastModeNetWorkk]

Liquid nitrous will extinguish your fire.

[@professorstein5855]

When I see that someone cries like a schoolgirl over something as stupid as whether you call it nitrous or nos, you better believe I’ll call it nos every time. Just for the entertainment of seeing someone cry over something so unimportant. Same reason why I keep my splitter guards on my Scat.

[@FrostbiteRam]

🤣

[@yerwrng]

I call it nos just like I call body filler bondo ... I find i don't care if that turns off the ptim and proper folks in my rock Crawler hobby I fabricate alot and the folks who get caught up on this are the least skilled at building.