Beginner's guide to pocket hole joinery | WOODWORKING BASICS

Get my curated list of affordable woodworking tools. Never overspend on tools again►
WWMM BASICS ►► How to get started using pocket hole joinery. Pocket screws are easy to use and allow anyone to make awesome projects with very little experience. In this video I cover the basics of how to create strong woodworking joints using a pocket hole jig.
LINKS TO THE POCKET HOLE PRODUCTS IN THIS VIDEO ►
Kreg Jig K4 Pocket Hole System: amzn.to/21kMSYj
Kreg K4MS Jig Master System: amzn.to/21kN4H4
Kreg K5 Pocket-Hole Jig: amzn.to/1QAQaeO
Kreg K5 Super Kit: amzn.to/21kNo8R
Kreg KHC-PREMIUM Face Clamp: amzn.to/21kN7Tq
Kreg KHC-RAC Right Angle Clamp: amzn.to/20Y4bZH
Kreg 1-1/4-Inch #8 Coarse Screws: amzn.to/1QAQl9W
__
WWMM is sponsored by MicroJig, maker of the GRR-RIPPER
bit.ly/worksafer
Keep your fingers safe. Get a GRR-RIPPER ► amzn.to/1PQruDW
__
----------------
SAVE MONEY WHILE SHOPPING ONLINE ►► bit.ly/WWMMebates Sign up now and get a $10 gift card with your first $25 purchase with Ebates!
----------------
Equip your woodworking shop for under $1,000: theweekendwoodworker.com/tww-...
PATREON ► / wwmm
TOOLS I USE► amzn.to/2F3hxQc
WWMM T-SHIRTS► amzn.to/2scxfYl
FACEBOOK► / woodworkingf. .
INSTAGRAM► / steveramsey_wwmm
----------------
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. #237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodworking #powertools #WWMM
Category
Howto & Style
----------------
Music:
"Loose Joint" by Per Almered
----------------
#pockethole #joinery

[@katandpapa]

Just bought my first Kregg 320 pocket hole jig! I'm 60 years old and I feel like a little kid at Christmas!!! Your video was helpful! I'm getting ready to build a small patio table! I've been layed up with Cancer but I need to feel at least a little productive and woodworking is an awesome option! BE SAFE,GOD BLESS!🇺🇸🙏❤

[@gorillajoe999]

Kick that cancer's ass Dave!

[@prayertool]

Dave Stump hey Dave .... you go get em. Proud of you!

[@commentscommence]

Praying for you to have a great recovery in God's name, God bless you!

[@cms1083]

I know this was posted quite a while ago but I hope you're doing well now !!

[@freedomtrailamerica2981]

God bless. I will be praying for you. You are courageous!

[@chrislucas2324]

Probably the ONLY video that I've found that talks about drilling direction of the pocket holes, and why you want to go into the "face grain" or "edge grain", and into the "meat" of the wood. Super solid overview sir!!!

[@AdamMcAdler]

3 years later, and still can't believe Leo didn't get the award for his riveting performance as the MicroJig

[@GeoffWhittaker]

He was robbed.

[@houma1984]

I do not understand why so many disliked?

[@outerbanksproductions_videos]

That gig was really funny!

[@gregghernandez2714]

@@houma1984 It is because Woodworking purists (snobs really) don't thing pocket hole joinery is "real woodworking." I personally prefer using dowels, but sometimes it just isn't worth the time or effort. Pocket holes are great, especially when they are hidden in the back or underneath a project like Mr. Ramsey says. Sure dove tail joinery is beautiful but sometimes it just isn't necessary.

[@llehmannz]

But it's become a cult classic since the Academy ignored him

[@patrickzadd5215]

although I’m watching your video seven years after you posted it the information is still accurate….. and well presented thank you

[@iinglorian]

Hey Steve, I love your videos! This last weekend my son (age 8) and I were going to work on a project that was going to require pocket holes. I brought up this video and told him to watch it so that he would know what we were doing. When it came time to do the work, he told me how to setup the jig. He then took the drill and drilled the holes, screwed in the screws, and I drank a cup of coffee and watched! It was marvelous! Thanks for a GREAT video!

[@timothymbess]

Ah, good old child labor! "This playhouse ain't gonna build itself, Billy."

[@Anubisxian]

Child labor laws are ruining this country!

[@eli72481]

+Anubisxian agreed.

[@onemarktwoyou]

LOL!!! Anubisxian I read your comment five minutes ago and laughed. Then I thought about it. Then I realized it was probably true. Our kids are lazy and stupid because they don't need to be anything else.

[@Relfy75]

Great work Kalvin. Good on him for getting stuck into it. Steve's videos are fantastic and I watch them all the time with my father.

[@jono9549]

I like to place a nickle on the base when I adjust the stop collar. Great video, basic instructions are always appreciated!

[@pt6134]

Picked up wood working as a hobby during covid 19. This is probably the best diy video I’ve watched! Great format and editing

[@rdpru]

This was my first video to watch on this subject. Extremely glad I watched yours. Your technique is awesome, and your speed and style of teaching is down to earth and easy to grasp. Well done sir. Looking forward to more of your videos.

[@IceEdits8]

Just came across this channel...wow, this guy is good, great screen presence, awesome editing, no umms/ahhhs, not a single out-of-focus shot, and a Mystery Spot bumper sticker sighting...this is KZbin at its finest.

[@berniesr]

I've used pocket holes joinery for a while but still found your demo useful. Never hurts to go back to basics

[@shanecricket1350]

The pencil analogy about drilling vertically into the grain and causing unwanted separation was great! It made a lot a sense and helped me a lot thank you

[@clos5700]

I've had my Kreg jig for about ten years and today I learned something new about it. Thanks for an informative video.

[@davecostello560]

I'm new to pocket hole joinery. This video has covered all the things I wasn't clear about. Thank you so much!

[@melissamueller9884]

I’m a super beginner woodworker, and your videos are so helpful! I’ve never even used a drill until recently. Today I used the Kreg Pocket Hole Jig for the first time today and used this video as reference and it worked perfectly! Thank you so much for making videos that make sense to extreme beginners like me. You’re the best!

[@thediydude]

Nobody ever explains how to kreg 2 different thicknesses of wood like 2x4 to 3/4" plywood table top

[@skampp]

Same. So I did some playing. Adjust the height of the jig to the height of board 1 (the one that I'll drill the pocket hole into). Then put the bit into the jig, loosen the collet, let the bit drop to the bottom, the raise it up 1/8" and tighten the collet. For the screw size, I use the size of the board that I'm attaching to, board 2, NOT the board I'm drilling the pocket hole into. Probably should be common sense, but the older I get the more I have to study something. Side note, I'm not sure if I'd use a pocket hole on plywood. Maybe it's okay, just doesn't seem like it would hold up.

[@shrenikshah573]

Stumbled upon this video while searching for pocket hole joinery, and I am so glad I did. Steve did an excellent work on the video, especially the cross section showing the screw mechanism. Instantly became a fan because of his simple and friendly manner of explaining. Awesome job, Steve!

[@garyduncan7129]

Your videos are so concise and well photographed. If I have to listen to a part more than once, it's pretty easy to backtrack and locate the spot without having to go through more info than needed. I compliment you, your camera person, and your sharp editing skills. I've always been a little intimidated by using jigs, but this makes it seem so easy. Thank you!

[@212x3]

Just starting on "finish carpentry" and I gotta say, this video helped me understand what this tool does and how to use it. thanks.

[@septimuspretorius250]

Steve: you are “the man”! I enjoy your videos and Have been a subscriber for about six months now. I learned so much about pocket joinery from your video. Thanks for posting and please, keep up the good work.

[@abridgedanimefan1]

Found this channel a while back when I was looking for inspiration for a bookshelf project and now I just love this whole thing. Keep on doing the good work Steve.

[@sandrajeffrey944]

Thanks for a PROFESSIONAL video on this task! I hate 12 minute videos with 5 minutes of USABLE content! Bookmarked as I will want to review this video at least a few more times. Total novice with so much to learn but I'm motivated!

[@SteveRamsey]

+Sandra Jeffrey Thanks Sandra! Glad I can help.

[@Loren.C]

Sandra Jeffrey i agree. those videos you're like hey a little less talky and a bit more worky lol

[@jimtharp6556]

Amen! I hate 12 minute videos that easily could be condensed into 2 or 3. Awesome Steve!!!

[@daleburrell6273]

@@Loren.C "...talk is CHEAP- it takes MONEY to buy WHISKEY!!"

[@rithotyn]

Agreed. One of the reasons I watch all of Steve's videos.

[@stevendrake6831]

Found this video the most informative and enjoyable to watch and re-watch about pocket hole joinery. To the critics I say, "Steve Ramsey appeals to those of us that just want to get the job done." I love seeing he doesn't put on airs and that his workbenches and work areas look like most of ours.

[@dhansen57]

Great summary of Steve's expertise Steven! I agree!

[@pd417]

Exactly. Steve is an everyman's woodworker and he's just like the rest of us. He's like talking to your neighbor.

[@nicholascaldwell6079]

Leo Landi he’s saying Steve isn’t a snob or stuck up.

[@jacksonhawk4021]

Glad that I finally found someone like me that I can relate to. Well, someone that knows what they are doing and I can relate to. Thanks for the wonderful video.

[@RiotNY]

I love your channel, it's proved to be incredibly valuable for an aspiring wordworker like myself. Thanks you for taking the time to make these!

[@organize1979]

Thank you so much for this video! I just bought a jig for a bed I’m making and now I feel prepared before I use it for the first time!

[@kylelewis9377]

This 8 minute video just saved me hours of trial and error. Thank you so much!

[@ralphlivingston894]

That was the best video I’ve seen in ages. I was just getting ready to purchase a pocket hole jig and you answered all my questions. Thank you!

[@dottie3440]

Well done! For filling the holes I have always mixed sawdust (no shortage in any woodshop) with glue and fill them in, packing lightly, then sand them off. it's cheap, easy to do, and often provides a better match in color than those plugs. You'll have to play with your mix of glue to sawdust but that in itself makes a great little project, especially if you have young budding woodworkers around .....

[@Dathanswick1]

the cut a way was a brilliant illustration. thanks for sharing. I have built a number and quick projects with my kreg jig and they have held up to my toddler just fine.

[@BecBec1967]

I know! I build custom cat furniture my grandkids claim as their's. My teenager also sits & climbs on them to play with the cat. So you know pocket hole journey is solid!

[@qsharkswim]

oh my gosh thank you. I read the instructions that came with the kreg and was lost. i drilled a hole right thru the bottom of the kreg. your instructions are WAY better. good for you.

[@Bflatsolo]

This is one of the better instructional videos I’ve ever watched on any topic.

[@willettadoucet1794]

Hello Steve, I find your video's clear, concise, and fascinating! You have inspired me to look deeper into weekend projects , in which I usually have my husband complete. I am going to buy a joinery, and have plans on making a small shop inside of the garage! Thanks again

[@askellchaos]

"Making things is fun and enjoyable no matter how you approach it." Best line ever.

[@tonys.8810]

Great video! Thank you, I love your simple teaching style. Straight to the point without too many big words, perfect for this newbie to easily follow along.

[@coreygrua3271]

With this many subscribers, Ramsey has to be consistently excellent. He is. Plus, there is a practicality mixed with enthusiasm that certainly helps me. Bravo mere Steve!

[@angiedambrosio9609]

Thank you so much for this video! I am re-working a 30 year old buffet and adding height with drawers and this is exactly what I needed!😊

[@randallriley9320]

Great tutorial. Clear and concise. Top notch teaching! Now I really feel like I know where the pocket hole fits in on woodworking projects. I wish I could give you 2 thumbs up.

[@MaherSHoque]

Thanks for this tutorial. I've been resisting buying a pocket hole jig since I just got in to woodworking and don't wanna go too fast too soon. But... I'll prolly get one this weekend.

[@antoniocordova5370]

I never thought I could learn so much from you. You explain everything in detail that other doesn't. I like how you show the outcomes if is done wrong. Great guy.

[@alanmusicman3385]

Wow what a pleasure to find a complete, slick, informative, gimmick free video on this - so many superficially glossy or shambling or poorly lit videos about pocket joinery on KZbin. This one nails it perfectly. Thanks Steve.

[@LifeSurfingDude]

thank you Steve for putting it together. I was looking for a nice video explaining pocket holes and you just nailed it for me. very clear, educational. wonderful teacher you are, Sir!

[@leslieesparza4697]

Wow. This was an INCREDIBLY helpful and well made video. I love how you gave very practical tips (seriously everything I've been wanting to know) in very quick bits. THANK YOU!!!

[@amandathomas8844]

This is such a helpful guide for someone who has never built stuff before and has been confused about the jig. Great explanations for how and why to do things!

[@otisore]

Finally! After watching a half dozen other videos on pocket holes I found this one, which was informative and covered all the basics. Thank you very much from this beginner woodworker!

[@naztubes]

Having built my first ever desk last year by drilling in to the end grains, I can definitely testify to how weak the joins are and did in fact experience some splitting. I'm building a couple of toy boxes this year and going to attempt it with a jig. Thanks for this excellent overview 👍

[@khaunani]

You explain things very well, and I appreciate that you give examples. Thank you!

[@laurenragle5228]

My dad got me hooked on your videos a couple of years ago and I recently bought my own pocket hole jig. It does take a little practice, but once I got the hang of it, I was able to make a couple of cool shelves - one in the bathroom around my toilet paper holder and one across the back of my stove for spices. :) Thanks for the awesome content!

[@activeal]

One of the best videos on this topic I have seen. You've motivated me to start shopping for a pocket hole jig! Thanks!

[@heatherlaird-mcleod3271]

Hi Steve, I made my first wood frame yesterday, and it's all because of your video. Australia now stocks Kreg products so this made it easier to get the exact same one in your video. As a female, its refreshing to find that you don't big note your self like others and explain very simply what will work. As us Aussies would say, "good on ya mate" & thanks.

[@jackjensen5093]

Heather "Roberts your Uncle"! Is that right?? I have a friend who lives somewhere near you. He said that one like. Its Good!

[@heatherlaird-mcleod3271]

It's "Bob's your uncle" but I know what you mean.

[@gordonparr3433]

Nature or nurture? What an incredibly clear and informative, easy paced presentation. One of the best I think I've ever seen, and sadly I think I've seen too many that are not a scratch on this. Well done Steve Ramsey

[@JodySoul]

Steve, I'm doing my van build and you have officially become my teacher. Your content is amazing and highly valuable, especially for beginners. I am now a new Subscriber. Thank you for this!!

[@adrienneskala3876]

Finally! A tutorial that explains pocket holes without confusing the novice builder. Informative snd entertaining. My hero!

[@woodworkabbott4678]

since watching your channel I have finally bought myself a pocket hole jig :)

[@jamezason]

Thanks Steve, you’re an incredible teacher!

[@ADHTube]

Hi Steve. I’m Al. I’m a 61 year old videographer who also retired from the USPS as a letter carrier in 2020. Although, I thought that it would be smooth sailing as I looked to continue my KZbin channel, get my unmanned aircraft license and rediscover life after retirement, the pandemic has kind of made me step back and rethink a few things. Today, I came across your video and something that I hadn’t felt since shop class in high school came back. The calm and satisfaction of carpentry and woodworking. I saw tv ads about the Kreg tools and pretty much didn’t think too much about it until this past year. The open of your video addressing the rest of us who just want to make stuff and feel the satisfaction of its completion, made me feel like THIS is what I REALLY want to do. Not saying that everything else will fall by the wayside but this will most likely be the most satisfying. Looking forward to adding the Kreg system to my Christmas list this year Lord-willing. Hopefully, my wife won’t think I’m bonkers 😂. Thanks man and keep it coming! 👍🏾

[@scotthiorns4745]

Just stepped up my game and went with pocket hole joinery. Thanks for the great video. Very helpful!

[@aadsideas]

Nice! First time user here. Short but comprehensive video about pocket hole jig. Thank you. Shalom

[@MainelyOutDoors]

I'm just getting into woodworking for the first time to build-out a truck cap camper my self. In the process of learning the skills I'll need I stumbled upon your videos. I've watched several now and must say you do an amazing job at providing concise, clear, and detailed descriptions of each topic. Thanks for all the hard work it's much appreciated!

[@iWillTheThrill]

Thank you for this video! This is my favorite go-to kreg jig review when it has been a couple of years since the last time I made pocket holes.

[@ChrisBreemer]

Very professional and informative, thanks a lot ! Even though I'm not such an avid woodworker I enjoyed this and learned from it.

[@MarcenariaAmadora]

Thanks Steve, defenely this is the best video ever about pocket hole joints. Cheers

[@rodw]

Do you really have to use special screws or can you usea normal screw as long as it has a shoulder on it

[@jackknecht2783]

Marcenaria Amadora v

[@Pearsonca145]

@@rodw It absolutely cannot have an angle on the head and needs the 90 degree shoulder. A normal screw with a 45 or so degree bevel type head will split the wood.

[@robertc.6441]

What's your opinion on the flat jig, the more basic type?

[@angiesmith3183]

I agree!

[@Naxioan]

This was a really fantastic video! Answered all the questions I had about starting to use pocket screws and your presentation is extremely clear. Thanks a lot for the video!

[@Ale-hy6hn]

I was watching other videos where pocket holes were used by professionals. And I was thinking to search for a video where somebody would explain about them. KZbin seems to read my thoughts and your video just appeared!!! Excellent video

[@pamelahallissey20]

I'm just starting in some wood projects and ran across this video--can't wait to see more of your videos! You really speak to the beginner.

[@marceaton3128]

They probably should sponsor you. I bought my Kreg pocket hole kit after watching you use yours. I also bought the clamp. Miters have never been my specialty so the pocket hole has been a life saver with table tops or face frames. Norm had a very fancy pocket hold machine. Another nice thing is you can get away with no glue so if you want to take something apart later you can. I have even combined them with using biscuits when joining a table top together, no glue needed and the table can move with the weather. Take care Steve and thanks for all the videos.

[@511graphix]

just did the same as well

[@alikhansapargaliyev1437]

Steve, I am new to this channel, but I love all of your videos. Not only extremely useful, but fun to watch. All of them. You have a great personality, and I wish your channel great success.

[@gypsycruiser]

Steve you are an amazing presenter with so much wisdom and knowledge.Thank you for sharing your enthusiasm. I purchased the K5 system today and will endeavor to use it after I have watched your videos on pocket hope joinery.

[@ginab.7729]

Wow! Thank you! You’re a fantastic teacher.

[@roboticgrits]

Finally! A video of a solid no bs explanation for newbies such as myself... Thanks man!!!!

[@TheVCRTimeMachine]

I've already built an entire set of deck furniture before I found this channel. My latest project was an outdoor coffee table for my deck and by following tips and advice from this channel it is easily the best results I have had so far. Love my new hobby!

[@edt.5118]

Thank you! You helped me avoid making at least 5 mistakes.

[@chemistNATE]

Absolutely excellent tutorial. Well done.

[@mofeng8244]

rgl.sgre.sadg

[@VistaPanoramicabyLello]

Hi there... First of all thanks for all your videos... Id just began woodworking as a hobby, not a lot of time beeing an airline captain but at least once a week Im in my brand new workshop... Your videos are helping a lottttt... When Im in the hotels Im always here on youtube browsing woodworking videos and Im a big fan of your channel and also jay bates, spagnolo etc etc... Well... Thats it... If you ever come to Brazil come visit... As we say here... Minha casa é a sua casa... My house is your house... Best Regards

[@VistaPanoramicabyLello]

+Steve Ramsey beeing completely honest... Not a lot to see here... Yes we have nice beaches but as do you... I dont have a way to say something about brazil to you without cursing hahahahahaha... But as I said... If you decide to come someday....

[@henriqueblanck8883]

+Marcello Biffignandi Eita complexo de vira lata!

[@VistaPanoramicabyLello]

+Henrique Blanck?!? So nao vivo no pais de Alice... So isso... Esse pais eh uma piada... Uma M|~&@...

[@VistaPanoramicabyLello]

+Henrique Blanck e pior ainda é o povinho...

[@MachadoMadeiras]

Been an Airline Captain, I suppose you have more resources than others, so, the country is fine for 'A' class. It is a problem with people and poverty, I can confirm that but Brazil is a very nice place to live and yes, we have a lot of beutiful places to visit.

[@karlpiehl7666]

I have had my Kreg tool for a while and used it successfully but picked up several great tips from your video. One thing I like about this tool it is on a lot of projects it eliminates the need to use clamps while a joint dries. I like your presentation and your "don't do" suggestions. Great, easy to understand video. Thanks!

[@brt356]

Thanks again, for yet another helpful tutorial. You've managed to de-mystify yet another shop tool that looks like it might come in handy for some projects.

[@StamosTee]

Super great tutorial. Thanks for sharing.

[@WideWorldofTrains]

Very Nice, I was at Home Depot today looking at a Kreg K4 kit and it comes with a Free clamp and free mini jig kit! Gonna get it tomorrow

[@proudpennsylvanian330]

Did you get it?

[@olavodias]

I wish there was a way to like the same video 30 times..! Excellent tutorial, well done Sir!!

[@micklatham3425]

Been woodworking for about 40 years now,used pocket holes for the first time last week. I'm quite impressed. As you say.they aren't for everyone or every job.but I'm finding them really useful. Bought my own pocket hole jig yesterday. Being delivered today. Really looking forward to playing with it.😁

[@throwachair]

your face when you even had to mention the 'impact driver' priceless, I think they are brutal too, great video

[@mauritsvw]

Of course, you can just disable the impact function of the drill.

[@abs0lutezer007]

Variable speed works great.

[@thecaravan1]

It's only America that considers the impact driver a joinery tool, the rest of the world just uses them for car wheel nuts.

[@dstnjtimkhhundybhy4954]

@@mauritsvw how ???

[@mauritsvw]

@@dstnjtimkhhundybhy4954 Sorry, I now realize this is probably an impact only tool. I usually use the hammer function of an ordinary electric screw driver, which can be turned off.

[@CarolinaGirlCreationZ]

Ohhhhh my gosh! I'm so late to the game on here but I'm SOOOOOO glad I found our channel! I'm just now getting into woodworking after growing up watching my dad in his home based wood shop. This video is beyond helpful!!! New subscriber even though I'm late to the game. I've added the Kreg K4MS Jig Master system to my wish list! I will so buy it myself if I don't get it before spring Gotta get my first chicken run done so i think it would be sooooo useful! :-P

[@MonaKempton-dz5bz]

Heather H - my dad had a work shop also as he built home for a living .. I’m also late to the game, I should of learned all I could from my dad before he passed.. however I’m learning now .. good luck Heather..

[@CarolinaGirlCreationZ]

@@MonaKempton-dz5bz good luck to you too! It's so fun! Can't wait until I'm done with my chicken coop so I can start trying to build some furniture! Have fun! :)

[@wineberryfarmhorserescue1300]

I just bought a hand held pocket hole “pack”. I’m so inspired to try to make a wall desk that I finally am going to try. TY FOR THIS TUTORIAL! I have all those pieces and had no idea how to use them. Today. I am attempting my first join. Thank you again from a beginner

[@thomasmackey6760]

This was so informative it explains so much in easy simple terms and with great demos as examples but does not talk down Great job as always

[@tonymengela]

A little tip,, use wood glue with screws and its lock tight for glue and stay good from vibration and movement for much longer time

[@gnarthdarkanen7464]

Maybe it's for the "beginners' forum" space... BUT I'm kind of surprised nobody has added here, that wet glue is a pretty nice "lubricant" for lengthy screws into wood, too. ;o)

[@mmmuck]

I've heard it's better to wipe off excess glue after it has hardened. This is to avoid issue with thin glue residue & staining. Can anyone confirm that?

[@MikeJuntaman]

@@mmmuck The technique is to let the glue harden just enough to scrape it off with a chisel, maybe 10 20 minutes depending on your glue and the air. I do this a lot works great. If you wait too long say overnight you will hate yourself for it. I also wipe glue off without an issue just make sure to get it all!

[@schmojo33]

This is well done and I liked this better than what Kreg had on their website.

[@letmework6254]

+Joe Hanson and Steve; ;I agree completely. I have been using this joinery for several years and I learned more from your tutorial today than I have learned from any other source or experience. Thanks so much!

[@ddavis6453]

I have had a Kreg Jig for 2yrs...I have never understood how to use it.....Thank you for taking the time to make and post this video. I am going to use this (easy to understad) information on a project this weekend!! Thank you again!!

[@drymoonproperties]

I have used pocket holes for years especially when building cabinets they are very tough when used properly. You did a great job of explaining I like to watch others in case I can learn something new.

[@JonPetersArtHome]

Good stuff Steve

[@algallego]

Yes, he has some great videos. Long time watcher... not sure exactly when I subscribed... a while back I think or recent... there's so many great woodworking channels on here! Steve is very practical and doesn't get carried away trying to make a shop for Lamborghini woodworkers! I'm okay with the old-fashioned pedal car style of work-- simple, practical, effective, functional, utilitarian-- not the kind of guy who goes for the fancy lipstick on an expensive Italian female prima donna who won't let you touch or put your pieces to use once they go into her museum of a house after she's demanded Gianni Arosio level woodcrafts from you!

[@MakeSomething]

Really well explained! And a great job with the intro to keep the pocket hole dislikers at bay.

[@RookieMistakes0607]

+Make Something Hey David. I personally dislike them as I see them as a handyman method as opposed to genuine woodworking. (Also taking into account I am a novice that learns a lot off of youtube and see this as something that would hamper my learning experience lol) Also, love your podcast and channel bro :)

[@scottverge938]

+RookieMistakes0607 Sometimes you have to just get stuff done and not get caught up making joints that are overly complicated and strong for the application at hand.

[@RookieMistakes0607]

I get that, and would agree to a certain extent, but at the same time personally I would prefer to take that bit longer on a proper M&T joint and know it will last the test of time than shortcut with a pocket hole joint. Personal preference. I know some would be happy with PHJ, but each to their own lol

[@RookieMistakes0607]

***** pfft well thanks for ignoring me and scott! ;) :D

[@RookieMistakes0607]

Haha its all good lol :D I'll sfill witch your vids (sans pocket screws ;) :D )

[@b-gill9224]

Not sure how I came across this but I've learned so much from these videos. Thank you Steve!

[@vagas69]

Just bought the K5 and this video was perfect. Answered all my questions.

[@JanetDiaz6152]

Thank you Thank you . You explain it very well.. I was wondering how the heck i use my Kreg jig . The correct way..

[@ronh9384]

Janet Diaz De Valentin Janet what state are you in? Find a local Woodcraft or Rockler store, woodworkers club or Makers Space and they would be more than happy to show you how to use it if you need assistance. Or if you already know how to use it but have questions on hardware or any other topic I’m sure they would be happy to assist. Most places these days are helpful to men and women without being a crank about it.... And there is always KZbin! Good luck. Ron

[@stephenchavez1]

lots of good info. Like the proper way to screw into wood "meat" and the end grain issue that i found to be weak. Thanks!

[@bjhennessey]

I totally agree with our comment. Using the jig, drilling the hole, and driving the screw is easy. What's critical is deciding the direction of the screw (through an end grain instead of into one (when necessary)) and clamping of the pieces while screwing. Trial and error on my part.

[@Cher1124]

New wood worker DIYer here! Thank you so much for this!

[@drskvch5768]

Great videos Steve, love them. Going to use my Kreg k4 for the first time in the morning putting together a router table/out feed table for my table saw. Thanks a million for the videos.

[@markchadwick77]

I was making a wide board for a table top, gluing multiple boards together side-by-side. Because I didn't have enough clamps of that length, I used pocket holes instead for holding the boards together. After the glue dried, I removed the screws so I could reuse them. It's a much cheaper solution than buying expensive clamps. Also, I didn't have to worry about the boards sliding while the glue dried.

[@priayief]

Great tip! Thanks!

[@apatterson8128]

I'm two years late to the party. Lol. I always wanted to try that, however, the clamps were the issue. Just bought the K4 and I think I'm going to try it. Thank you for the great suggestion.

[@lpswoodworking623]

This is an excellent demo. If I worked for Kreg, I'd send you a crate of free stuff. Shame on them if they haven't even acknowledged at the very least.

[@FlushtheSystem]

Exactly, You know at least (1) Kreg employee has watched this and probably talked about it with many others at work. Has to have happened!! Sucks that corporations care that little about the consumer. Who am I kidding?? They don't care at all really. Just keep consuming you sheep....

[@davidb5454]

Thanks Steve! Been brainstorming how to build a mudroom locker system for my wife and pocket joinery will make it do-able!

[@damarabolton2002]

Thank you! Building a pantry closet organizer and was worried about the pocket holes...this was so helpful!

[@sturdy3690]

id be interested in seeing a chemicals basics video. ive been framing my whole life and id like to start broadening my woodworking, but i dont know when to use tung oil, or mineral oil, or salad bowl finish and so on.