Beginning the Build: 2024 KTM 350 XW-F

[@kirknelson3020]

Looks like a fun build with great parts!

[@slaverace1]

It is!

[@cadesmith61]

Do I need to change the ECU if the remove vacuum pump?

[@Ride4life311]

No you don’t….i didn’t do it with mine. It runs Titties!!!!!

[@slaverace1]

Hello Cade: The vacuum pump only removes fumes from the fuel tank and has NO effect on fueling, however the bikes are extremely lean from the factory and the ECU needs upgraded for proper performance, to stop flame outs and to increase engine life. Vortex slavensracing.com/?s=vortex&post_type=product GET slavensracing.com/shop/slavens-mule-athena-get-sx1-pro-4t-ecu-kit-for-ktm-hqv-gg/

[@gregharris2928]

Hi Jeff. Will my OEM fans on my 24 XWF 350 and XWF 500 still work correctly (come on at 190 deg) with the installation of Vortex ECUs I got from Slavens? Is he temperature controlled by the ECU or what. Thank you very much for your time!

[@slaverace1]

Yes, the Vortex is programed to turn on the fan like the OEM ECU.

[@gregharris2928]

@@slaverace1 Thanks Jeff. My bikes run so cool I haven’t noticed the fans coming on. The Vortex’s, FMF Q4s, and reeds removed really work well in performance and cooling like you’ve stated in previous Videos. Your employees at Slavens have really helped me out too. Happy Trails Jeff

[@Shelby8371]

Hi Jeff What bend are the odi bars??Looking forward to the build!

[@slaverace1]

Hello: KTM OE bars slavensracing.com/shop/podium-flight-mx-handlebars-by-odi/ .

[@chestertownelectric6290]

What GPS do you recommend that has trails and dirt roads on the map and provides turn by turn direction arrows?

[@slaverace1]

We like the Garmin Zumo or Trail Tech Voyager. slavensracing.com/shop/zumo-xt-by-garmin/ slavensracing.com/shop/voyager-pro-offroad-gps-kit-trail-tech/

[@davidjackson8880]

I just bought the same bike and was wondering what all the parts where in the bag. The service department at my dealership wasn’t quite sure. It looked like to me a de-smog kit. If that is what it is, it would be great to have a video on doing the exchange of the parts. Looking forward to your build. Like and subscribed.

[@slaverace1]

Hello David: Sorry, I can't make that video because I already removed the smog stuff. It is very simple, dive in.

[@davidjackson8880]

@@slaverace1 Hi Jeff, I removed all the tubes for the vapor canaster and removed the vacuum pump and replaced the dongle that came with the kit (boxed parts). I removed the O2 sensor from the head pipe and replaced the dongle that came with the kit (boxed parts). I removed the barbed nipple on the intake and replaced it with the provided screw that had some yellow lock tight pre lubed. I started the bike up and I get an error code, 5 long flashes and 3 short flashes. Do you know what could be the problem? I placed the fuel tank breather tube from the top of the gas cap to the top of the charcoal canaster on the right side of the bike. That seemed to be the most logical, but maybe I am wrong. Any help will be much appreciated.

[@melissathomas4051]

If you don't like it I might be interested in buying it next year. I'm going to get a 24 or 25 depending on if they really don't change anything for 2025.

[@slaverace1]

Hello: I think there are people already in line.

[@melissathomas4051]

What number am I?❤😂

[@slaverace1]

2025 Enduro Bikes are a BNG (Bold New Graphics) year! We will shoot you an email.