Behringer Wing, X32, S16, monitor board and foh Setup and Routing explained!!!!!
Пікірлер: 22
@sterlingbloomfield44584 жыл бұрын
Hey Jason thanks for making this. This is exactly what I needed. I’m going to set this up during the week and see how it goes. Appreciate you digging deeper on this one for me. All the best
@jshi6004 жыл бұрын
No problem, this is how I had it set up before, but I just didn’t go into detail. Great I could be a help!
@laveaux89152 жыл бұрын
in this setup can you also use the inputs on the x32 to send to the wing?
@eventinturkey2 жыл бұрын
we need to know use 2 wing console for one foh and one monitor console for 2 pieces s32 stagebox.
@cedrickwallace19302 жыл бұрын
Can you do this with two S16 to x32 rack and the wing?
@jshi6002 жыл бұрын
Yessir
@joshuaghiotto96883 жыл бұрын
Can i use just a personal computer as my monitor mixer at side of the stage
@jshi6003 жыл бұрын
You can use a tablet or a phone not a computer yet.
@johnlopez24753 жыл бұрын
DUDE
@diegodomisol1104 жыл бұрын
super
@emanuelmorales45294 жыл бұрын
Awesome info! How do you set up or connect main left and right?
@jshi6004 жыл бұрын
Hello!!! From these instructions it would be channels 7&8 of your 1st s16.
@emanuelmorales45294 жыл бұрын
In the future are you planning to make a video using a scene from the X-32 on the Wing?
@jshi6004 жыл бұрын
Emanuel Morales yes I can if that is what you would like to see
@emanuelmorales45294 жыл бұрын
Jason Robinson yes please! Right now I’m in the middle of the process of connecting the Wing with the X-32 without using a digital snake I’m crossing fingers everything works out.
@jshi6004 жыл бұрын
Emanuel Morales hopefully it worked out but if it didn’t check out my older video kzbin.info/www/bejne/nHOWp5Skd5menZI
@joshuaghiotto96883 жыл бұрын
Can i hook up two video monitors to the wing, at foh... one on the right and one on the left so I can watch two pages at 1 time
@jshi6003 жыл бұрын
No sir not at this time
@schotimeaudio Жыл бұрын
So you X32 is your monitor console and the Wing is FOH...... and you're coming out of the B port of the X32 (Not S16) into the A port if the Wing (FOH), correct?
@schotimeaudio Жыл бұрын
If I had an S32 or DL32, could I come off of the B port of the stage box into the A port of my FOH console... would the routing still work the same since its all one stage box?
@schotimeaudio Жыл бұрын
Also, instead of using the block routing (1-8, 9-16, etc..) for the outputs, I could essentially use the user routing to dictate specific routing, correct?