Belt replacement 2000 Toyota Echo power steering alternator air conditioning Install Remove

[@InnovatorAM]

Just finished loosening and then re-tightening my alternator. Got rid of the horrible screeching sound I would get when I turned my AC on. Thanks for the video!

[@sabrinalee1926]

Innovation Gaming what is the voltage for a 2000 toyota echo the origial voltage 70 or 90 let me know please no one knows

[@andredube5769]

Austin Martratt Aq

[@mistertakeuchi984]

I was able to fix mine too. Thank you.

[@tonymassinger6942]

@@mistertakeuchi984hi

[@derek5395]

​@@sabrinalee1926 70

[@Goody2shzToo]

Thank you so much for this video! My husband was able to change his serpentine belt for the first time with your straightforward directions. You're the best!

[@jettdriver9169]

great tutorial very helpful-just changed the belts on a 2002 Echo and you made the job a breeze!

[@zachdoering1029]

This video shows it all very well and very descriptively! I had a hard time routing the Alt belt. but figured out I was routing it wrong... If this video doesn't make it click for you, better just put the tools down and call a real mechanic lol... Was super easy, Thank you!

[@derrickyoung7144]

You da man! Would never figured out how to get the o the power sterering belt without this video. Outstanding explanation/instruction!

[@davidchall4976]

Excellent video,thanks. I'd advise having new plastic push fasteners for the inner fender on hand before you start the replacement, they will probably break on removal.

[@MiguelD510]

Good Evening Todd, Just wanted to say thank you! Your video helped out some much. Much appreciated!

[@Tieler227]

thanks for the video,it really helps me when I can't afford to get a mechanic to do it, thx again

[@mydaddy5393]

Geezzz. I was just killing myself trying to loosen the inside power steering belt and you just pulled the belt. Looks to be the same engine as my 2004 scion xb. I'll give it another shot in hopes to not break the belt off. Wish me luck!

[@colingroeneveld8670]

Thanks for the vid, saved a bundle figuring out how to replace the power steering belt! Cheers!

[@Swenser]

I got to power steering nuts from top. No need to remove shields underneath. Most likely need to loosen pivot point nuts. Some people seem to get away with a slippery point and dont need to do that. I did.

[@michelleanderson9711]

Thank you. I'm about to give it a shot . Wish me luck!

[@emmettcrass5239]

How’d it go?

[@bigc6812]

Good stuff man-thanks a lot!!

[@samuelmaynard5583]

Great good demonstration thank

[@m.camacho8925]

Hey thanks... planning on replacing the belts soon... do you have anything on changin engine mounts and transmission mount on Toyota echo?

[@eg8475]

Dunno if it helped me yet, my sister got problem with her verso showing lights for power-steering and alternator malfunctioning, haven´t had the time to look at it, but my guess is this fault. thanks for sharing, (sharing is caring).

[@koolkiwikat]

Thanks mate, perfect to sort my Toyota 2000 Funcargo

[@victorcruzmontanez1040]

Thank you so much ❤❤❤

[@nelsonmelendez1612]

muchas gracias por la demostracion de como reemplasar la correa del power steering😃😃👍

[@MurfFJ]

Thank You , Your vid. was helpful, you certainly made it look easy, that is for those who have a lift. No worries though I saved time by not even trying to attempt the job from above, but secured the little 2003 plastic Toyota Beast's, front end, jacked up in the air, Transmission in Park, E. Brake, pulled on tight, both back wheels choked & blocked, forward & backward, then lowered onto 2 ton "Jack Stands, at the appropriate designated places, for Jacking the Echo's front end up, along each side. Yes!!!, making the job go just as, safe & easy, as you made it look when you were under it, winding that belt around various places it needs to go. Good hint you gave,!!! to have that diagram, of the belts, required Pattern of installation, with you when your down under, Thank You!, ( listen up crew ), Helps to get it right, the first time. Thx again, for sharing.

[@imGlobL]

I guess it helps when you have a hoist

[@nicholasmcdonoough5922]

Does that other bolt lock it into place? Not the one through the wheel pump

[@InnovatorAM]

Is that the only nut you need to loosen to release the alternator? Do I need to put a lot of force to move the alternator through the groove?

[@ivanmunoz9351]

yes only that one. yes some force too. sometimes its really stuck in there so before trying to move it. put some lubricant in it.

[@grzegorz8291]

Thanks for this video !!!

[@JakeV]

I've got a 2001 echo and there is almost no clearance to get the ratchet wrench onto the bolt you're pointing to when you start the video. Tried for hours and when I finally wiggled the ratchet on there, it wouldn't budge.

[@kippraneumann9135]

I had to loosen the three bolts on the mount and let the engine go down. I put a jack under there to support the engine and moved it down slowly.

[@nelson8784]

@@kippraneumann9135 is there another way? lowering the engine down sounds not the best thing to do

[@osuka6193]

@Jake V did you ever figure out the answer? I'm having the exact same problem.

[@MrMR-sk8jm]

How long of a serpentine belt does a 2000 Toyota echo need?

[@JohnEwan]

At 2:15 you pry on the alternator to tighten up the belt, then show the power steering belt is now tight. But those are separate belts. How did you tighten up the power steering belt?

[@braadude1239]

He meant power steering pump, if you look closely you see that's not alternator.

[@johnb.9806]

What are the part numbers of those 2 belts? Looking for them online. I have a 2000 Echo whose belts have started to squeal.

[@coohjay]

John B. did you ever figure it out? my belts are squealing pretty bad on my 2002 echo sedan, was also looking for belts online.

[@ryanhuang8498]

Try Dayco or Gates catalog they have an online guide to tell you which belt you need.

[@MurfFJ]

Just purchased an replaced the alternator serpentine V belt with a "Gates Micro-v", Part # K040465, 4Pk1181, 9/16" x 47" OC, for the 2003 Echo, Auto Trans, with AC. Purchased at O'Riely's for $19.95

[@mikegreen7108]

My bad it is a 14 mine is stripped.gonna try and loosen a couple other bolts

[@joegarcia3567]

Is the tie rod on right side hard to replace?

[@allanzaloumis3273]

How do you install A/C conversion kit?

[@raiders4lifejustwinbaby856]

Why didn't you mention that one had to take off the alternator belt?

[@dannycool59x49]

It looks self explanatory

[@MrSpeedkar]

Tengo el mismo auto y tiene una correa 3pk845 pero el manual dice que la original es 3pk850 ¿Influye en algo esa medida en la direccion?

[@denisovanhybrid9610]

No

[@hyperx43]

arent there belt pully tensioner for the bigger belt on the second half of the video/ only way to tighten it prying the alternator?

[@herculesrockefeller2984]

+hyperx43 Yep. I just spent half an hour prying on what I thought was a stuck tensioner, but you have to loosen the alternator, its the only way.

[@MsDannyrevs]

If you have AC can you use the non ac belt and just bypass the compressor? My 02 echo needs a new compressor and I do not want to buy the $390.00 part I use the car in the winter only and do not care if it has AC. just wondering if you have worked on a non AC model and if the belt for that model would work for me.

[@fixingcarsandstuff]

On some cars you can do that. I do not know for sure if you can for yours, it all depends on how the belt routes. And if the pulley on the compressor is ok, but the internal parts of the compressor are bad, you could just dis-connect the compressor electrically, so it never comes on.

[@jedflores6676]

just what I need

[@corneydasilva5831]

Power steering its the next one, but try!

[@joelrodriguez5918]

is this a 2nz-fe engine?

[@orlandomena6895]

Hello! You know how many belts needs toyota echo transmission auto year 2002?

[@rob0781]

2 belts

[@spaace9414]

I'm not understanding how to loosen belt ? just move the pump over ???

[@derek5395]

I'm having trouble loosening the drive belt on my 2000 echo at the moment. The two mounting bracket bolts are easily loosened but I was told by a friend to loosen the bottom bolt on the alternator as well. The bottom bolt is practically welded on but I haven't tried using a pry bar to push the alternator back yet. I'll post here again when I get it figured out.

[@sabrinalee1926]

for a 2000 echo what is the voltage for that70 or 90

[@nomadicheadspace1741]

I'm a Todd too lol

[@PKSTkimo]

is this the same as a 4 door yaris??

[@PKSTkimo]

2003

[@ryanhuang8498]

As long as it's the 1.5 L engine,yes.

[@mikegreen7108]

The other bolt isn't a 14 probably a 12. Well see.

[@amartuvshinm.3586]

Haha funny