America Deserves the A300 Outlander! Find out why the all-new, made-in-America wondergun is the ideal entry level gun for kids and adults, at a price hard-working Americans can afford.
Пікірлер: 94
@AnthonyGuardanapoIIIag38 жыл бұрын
My left ear enjoyed this
@bazzucca60736 жыл бұрын
Awesome gun! I crawled about 150 yards in a muddy cut corn field after some sandhill cranes, gun was covered in mud and full of water. Still killed the cranes!
@Scalia-ig6qz3 жыл бұрын
Damn....Beretta is 500 years old??? That's impressive.
@dskippyb11 жыл бұрын
just got mine last week, at Cabelas it comes in a regular "Beretta" factory cardboard box and it comes with 3 chokes: IC, M, F. VERY happy with it, pattern was brilliant at 40 and 50 yds. 3" Kent Fasteel magnums felt like your standard AA trap load. A+++++
@jblsmith50711 жыл бұрын
Step 1. Lock the bolt back. Step 2. Unscrew the forearm cap and remove the forearm and barrel. Step 3. Release the bolt and allow it to slide forward slowly. Step 4. Remove the charging handle by pulling it out forcefully Step 5. Turn the gun upside down and allow the piston, bolt, and bolt carrier to slide out of the receiver. Step 6. Use a hammer and punch to punch out the trigger group retaining pin. Step 7. Remove the trigger group by pulling it down and forward out of the receiver.
@chaos311clarity12 жыл бұрын
Nice lookin' gun! I'm gonna have to see if i can get my hands on one to check it out in person!
@BerettaCommunity12 жыл бұрын
@Ihitbounces It's the manufacturing process, the quality of materials used and the technology. Similar to why a Corvette is more expsive than a Celica.
@dirtmaop10 жыл бұрын
Really excited, hoping to get this gun for my first gun. Reasonable price and good quality. Hopefully catch some nice game!
@BerettaCommunity11 жыл бұрын
You can do anything you want, because it reliably shoots 2 3/4 through 3 1/2 shells.
@glock_9ine9562 жыл бұрын
In the video it says 3”
@surfgraham11 жыл бұрын
very impressed with this gun i just got it Friday as a back up to my k-80 pro sporter and i shoot 23% better with the a300 great gun
@Ihitbounces12 жыл бұрын
thank you and i look forward to getting this gun and if i do i will post a review on it
@rabbitdrink6 жыл бұрын
I wish Beretta still made 390s
@jblsmith50711 жыл бұрын
Step 1. Remove the forearm and barrel. Step 2. Unscrew the magazine cap by pressing in the retaining pin and turning the cap to the left. Be careful as the cap is under a lot of pressure from the magazine spring. Step 3. Remove the plug from the cap by breaking the lock washer holding it in place. I used a Flathead screwdriver and needlenose plier. Step 4. Replace the magazine cap by depressing the retaining pin such that you may screw the cap back into place. Step 5. Reassemble the firearm.
@SteelTiiTan11 жыл бұрын
Up to 3" in the standard model A300 Outlander
@wallywest12 жыл бұрын
Picking mine up in a couple of days. It's super greasy. haha.
@Donohuet711 жыл бұрын
no , it chambers up to 3 inch, but it still can shoot anything with 3 iinch.
@prometheuspaintball11 жыл бұрын
When will a disassembly video arrive? I need to maintain my A300!!! I shot it and need to clean it! It shot really well. Very impressive.
@BerettaCommunity12 жыл бұрын
We have not released the A300 yet. It should be available before the end of the year.
@BerettaCommunity12 жыл бұрын
@Ihitbounces The Aqua tech is not featured in this gun but is available in the A400 series
@BerettaCommunity12 жыл бұрын
Спасибо!
@stevenhindman132711 жыл бұрын
When is Beretta going to make a 12 guage rifled barrel for the A300 and the A400- Xtreme KO?
@BerettaCommunity12 жыл бұрын
No. They are made in the USA
@gfg82626 жыл бұрын
I own the camo version he is showing and it is a great gun. However i hate when companies cheap out on features like the molded in sling stud on the butt stock & then call it a sling system like it is better than what other companies are offering. Just call it like is, (we had to cut corners because times are tough.) And since when is $800 a price that anyone can afford for an entry level shotgun? I like the gun but they need to cut the bullshit.
@highplainsdrifter96315 жыл бұрын
That is the MSRP. Street price is about $650. It is an entry level Beretta semi auto shotgun, and for the money you get a lot of gun. They're very well made and reliable. $800 is really not that much for a shotgun, considering how far up in price they go. Anyone with a decent job can afford an A300.
@BerettaCommunity11 жыл бұрын
We can't speak for the Patternmaster, because we do not manufacture it. You'd need to call the manufacturer.
@BerettaCommunity11 жыл бұрын
I can't comment on Canada. You would need to contact Stoeger Canada.
@johnspinosa566811 жыл бұрын
Are the Beretta's made in the US as good as the ones made in Italy?
@thechaneyunit8 жыл бұрын
Beretta - Why is there no information on the A350 Extrema on your website?
@aj45colt12 жыл бұрын
adjstbl length of pull only 14.5... that sucks.. i wish they wouldve made them 15 lop. some of us full size men here in the US need larger guns damn it! lol maybe next time...
@Ihitbounces12 жыл бұрын
this may be a dumb question but what makes some beretta guns more expensive than the others is it the name or what
@talalkassem575 Жыл бұрын
Beretta age is almost 500 years, they did a lot of great guns during that long period so sure you will be paying more for the name.
@leftcoaster6711 жыл бұрын
Elwood Epps They carry it. But in Canada it's only 3 rounds capacity.
@BerettaCommunity12 жыл бұрын
Well... you still have a cool profile pic, AJ ;)
@chunkyfecalbreakfast10 жыл бұрын
$835 in wood, so put UK tax on it and that's $1000, so why does this gun cost $1300 in the UK? We get really screwed in the UK.
@steve229337 жыл бұрын
Good old EU tax?
@daleg16795 жыл бұрын
Because you don't live in a 'free' nation. Enjoy all those immigrants and your coming Muslim overthrow.
@drankingj11 жыл бұрын
I purchases the A300 it fires well. However, the instruction manual leaves much to be desired (specially for cleaning the weapon). The major drawback for this shotgun has a terrible manual and very little support - what I found is no support at all from Beretta for this shotgun model.
@dskippyb11 жыл бұрын
3 is plenty, unless you're a bad shot... :-)
@BerettaCommunity12 жыл бұрын
What sound issues are you experiencing?
@TheChillster9711 жыл бұрын
@BerettaCommunity can I fit the beretta patternmaster in the a300 synthetic
@macbookawesome1711 жыл бұрын
Can I do trapshooting , waterfowling, and regular hunting with this gun?
@DD-mg9rf3 жыл бұрын
Does this shotgun have o rings in the gas system
@fresht54908 жыл бұрын
Beretta - on the A300 outlander is it true that it's possible to reverse the safety if so can. you please show a video on how to do that thanks
@Ihitbounces12 жыл бұрын
and also does the outlander have the aqua tech stuff
@hadi11111112 жыл бұрын
help please .... I am welling to buy a300 ..i live in middle east ,and dealer here claims its made in Italy? please tell me if there is another version for out lander made in Italy, and if though what is difference between them...and is there any made in Turkey " parts installed in it ? Thanks a lot for help
@scoombes112 жыл бұрын
A300 Outlander w/ wood stock STILL not available here in the USA! I've been patiently waiting for months. What's the deal?? I call beretta USA and all I get is "release date pushed again." Grrrrr
@Siafu6612 жыл бұрын
Are the Beretta A300 shotguns 100% made in Italy?
@garrettramsey6437 жыл бұрын
Are the barrels made in Italy or in Turkey ?
@talalkassem575 Жыл бұрын
99% made in turkey
@basfishermanallyear12 жыл бұрын
Ive been trying to find a place where i can buy this gun in the U.S in Dallas TX let me know bout a deler near me or what cause i herd that there where pushed back to 2013 let me know if this is true
@dskippyb11 жыл бұрын
So does BATFE know your illegaly selling firearms and shipping directly to customers? Or at least attempting to do so?
@danschneider30778 жыл бұрын
What wood is the wood stocked made from? Is it walnut or regular hardwood?
@BerettaCommunity8 жыл бұрын
It's walnut
@redchaos7111 жыл бұрын
Are there recoil reducers available for this shotgun and whats the price range ?
@scoombes111 жыл бұрын
Hi BerettaCommunity, I've been patiently waiting for a A300 Outlander WOOD stock for approx 6 mo. to arrive at my local Cabelas. Could you please provide an update? Thx
@FriedrichVon12 жыл бұрын
This video has some sound issues...
@themik50298guy12 жыл бұрын
A300
@danielcontinisio4562 жыл бұрын
can i put a red dot on it?
@themik50298guy12 жыл бұрын
Is this out yet in colorado?
@kkrogman10012 жыл бұрын
a300 or al391 urika???????
@inspectyerbooty11 жыл бұрын
why do i hate it when people load the chamber before loading the magazine?...oh yes, i remember now....it is because they are begging for trouble with a negligent discharge at the time when they have the least secure hold on the weapon!!!! everyone please remember firearms safety rule...DO NOT CHAMBER A ROUND UNTIL YOU ARE COMPLETELY READY TO FIRE!!! you are not ready to fire if you are planning to load more shells after chambering the first one.
@richardaltman83923 жыл бұрын
Why does my a300 only hold 3 shells in the magizine
@BeefNBaws3 жыл бұрын
Not sure if you already figured it out, but there's a plunger you can remove from the tube. There's videos on it here on KZbin. You just need some pliers and a flathead
@wallywest12 жыл бұрын
how do I remove the magazine plug?
@tommytrax44067 жыл бұрын
is the wood version american or turkish walnut? i know that it is made in america just wondering
@BerettaCommunity7 жыл бұрын
It is Turkish walnut
@niwort.v84297 жыл бұрын
Does it have the same action of old a300 made in italy? Or new modification to the new series like a391 silver mallard🤔
@BerettaCommunity7 жыл бұрын
This is the same A300 as the one distributed in Italy
@niwort.v84297 жыл бұрын
Beretta wow nice ehe 😊👍
@niwort.v84297 жыл бұрын
Beretta i have a beretta 1200 , im just wondering if the receiver of my old 1200 is just the same receiver like of a beretta a300 sir 😊?
@todorkitchukov40959 жыл бұрын
front sight mm ?
@zaheermughal5967 жыл бұрын
does anyone know if they have a slug barrel for this gun?
@inspectyerbooty11 жыл бұрын
example for my other comment at 4:32 time code = why do i hate it when people load the chamber before loading the magazine?...oh yes, i remember now....it is because they are begging for trouble with a negligent discharge at the time when they have the least secure hold on the weapon!!!! everyone please remember firearms safety rule...DO NOT CHAMBER A ROUND UNTIL YOU ARE COMPLETELY READY TO FIRE!!! you are not ready to fire if you are planning to load more shells after chambering the first one
@rogercougle30424 жыл бұрын
My sister has this gun
@michofaddoul959812 жыл бұрын
this is made in turki but beretta wont declare it
@ctawab10 жыл бұрын
Why can't beretta still make the a303. It's the only auto loader to stand the test of time.
@BerettaCommunity10 жыл бұрын
Because we are constantly improving our guns... otherwise we'd still be offering you wheel-locks, and what fun would that be? :)
@skobichevskii9 жыл бұрын
what is the range of DAC/DAH adjustment?
@richardaltman83923 жыл бұрын
My a300 only holds 3 shells in magizine.why not 4
@BerettaCommunity12 жыл бұрын
For this you should contact the Canadian distributor (Stoeger Canada) at 905-436-9077
@f7catsp7 жыл бұрын
800 entry level price. smh
@forrest2257 жыл бұрын
That's MSRP. Street price is about 600 for the black one.
@dalesimons19665 жыл бұрын
I lucked out and got my black synthetic A300 for sale at 500.00 new. A local gun store just had an awesome sale.
@jamaica2peace10 жыл бұрын
3 rounds in Russia also
@dskippyb11 жыл бұрын
Ha, probly a little late with my reply... :-P
@Donohuet711 жыл бұрын
Excuse me, but the vid says that it shoots 2 3/4 and 3 inch, not 3.5 inch.. whats for real here?