Beretta Px4 Storm - Basic Maintenance and Magazines

You can find cleaning kits and gun care products here: hubs.ly/H07mkFP0
An easy step-by-step guide for basic maintenance of the Px4 series in all three sizes.
Includes an overview of magazine interchangeability.

[@BerettaCommunity]

The Px is the companion to the Cx series (carbines), which was originally offered in four calibers: 9mm, 40SW, 45 ACP and 357 SIG. This is the reason for the "4" in Cx4. When we developed the Px (pistol) we called it Px4, keeping the naming family tradition, even if offered only in 3 calibers (9mm, 40SW and 45ACP)

[@iL4M]

I purchased my Px4 and was told it is a 44 cal. I know this is an older video so is the one that I purchased a newer version?

[@pastrami1945]

Have had PX4 9 mm since 2009. No problems, no failures. Shoots well with any ammo. Great pistol.

[@bobcat5844]

I own px 40 full size and I love it but monarch ammo will jam it. I don't blame the storm I blame the ammo.

[@artardFTW]

just picked up my full size 9mm px4 last week and took it to the range yesterday, and cleaned it when i got home. as a first firearm, I really like it.

[@DrAlexVasquezICHNFM]

It’s a great gun. Very intuitive

[@twrecks4598]

Just picked up my Compact!!! I have wanted this pistol for a couple of years! Thrilled. Thanks for a great vid!

[@Aragorn_Spyderco]

Love my Beretta Px4 Storm full 9mm - shoots like a champ

[@MichaelSmith-ih4cl]

The gun itself is a great one this video left alot to be desired.

[@doranjaffas7351]

I didn't know these existed until a week or so ago. Watched several youtube videos. I just bought a slightly used well cared for one this morning. Fired one magazine out to 30 yards. Frankly I was stunned at how tame and accurate it is. Very happy with it. I assume I will only get happier with it as I get to know this gun. Doran Jaffas

[@dangerfoxgaming110]

I thought the video was fine and as described - Basic maintenance and magazines. I think the intent was to exemplify the difference between the three models in terms of how they are taken down and cleaned (from one, another). I appreciate the time and effort you took in recording and posting the video.

[@trooperrogue9732]

Excellent video thank you. Got the PX4 Storm full size. What an excellent pistol. My Glock 19 was my primary gun in case SHTF. The PX4 is now my primary, number 1 pistol. The Beretta is definitely a MUCH BETTER firearm. Don’t get me wrong I love Glock but Beretta has an EXCELLENT and smooth trigger. WOW, it also has way better parts, A WAY BETTER FINISH, BETTER ACCURACY & is better quality. In My Honest Opinion. Accuracy on the Beretta is SUPERIOR!!!

[@DiamondDustAndVerdigris]

Thanks for the help, Eric. Just cleaned my compact for the first time. Couldn't have done it without you. :-)

[@DiamondDustAndVerdigris]

+Dareis Nogod Troll

[@khaninsanity]

Thank you for this video. Very easy to follow and just what I wanted for maintenance of my new PX4 Compact 9mm.

[@dareisnogod7291]

YOU NEED TO SLOW DOWN & USE CLOSE-UPS AS YOU EXPLAIN.

[@augustusheyliger6421]

Lol he did move a little fast..

[@northernsurvivalbackcountr4986]

D.N agree not the best cleaning video I've seen better

[@Rey1290]

Can't wait to purchase PX4 Storm .45.

[@larrysfarris]

I would recommend cleaning under the extractor hook with a solvent coated pipe cleaner - a lot of carbon builds up there.

[@vmcarrion]

Well The video was good I give it a 8. I am new to todays technology ,high fustigated guns, I bought a berretta this week I had no clue how it works. Video help me a lot. Thanks Just wish it was slower on the information just a little bit to fast for my age I guess .

[@YouLookinAtMe-Bro]

Love my 45acp Storm...shoots smooth as silk!

[@lilshorty2540]

Thank u sir u made the fastest and best video i have the compact size and i have questions i will ask u

[@John1cfi]

Just purchased a storm compact and it fails to chamber a round (slide will not close unless you push on the rear of the slide). Held over an hour and opted for a call back. No luck. Cleaned and oiled well as described and still jams every 5th or 6th shot. Headed out to trade for something that works.

[@tobyrichards4743]

just bought the full size, two weeks ago!

[@charlescruthirds7834]

Is there a Beretta video giving directions for disassembly of the slide components?

[@douglasdever6134]

I have three full size, two of them for many years, and I have always used grease on the slides.

[@larryjones6049]

All very clear to me.

[@livefree8245]

great video! i really enjoy my PX4 Storm .40 S&W! I want to get the .45 in FDE

[@warmachine_1396]

I use grease on my cam and in the cam groove. It won't run so it stays where it's needed for the camming action. It also doesn't evaporate.

[@richardfjr27]

I have the sub-compact .40 s&w and it is a great gun all around, it is my everyday carry. I have one minor complaint about it though, a few times now when I take the take down pin out, it comes all the way out, along with the small c-clip that is supposed to hold it in there. And it is a PAIN IN THE ASS to get that clip back in there. It sometimes pops out even if I go very slow with taking the pin out. I kind of wish the slide take down was like the compact and full. Other than that though, it's an awesome firearm and I have never had any malfunctions as far as firing it goes.

[@DrAlexVasquezICHNFM]

Thanks. I’ve got 3 of them, 2 subcompacts

[@BeardFaceSuper]

Honestly, this video is disappointing. People looking for "How to clean" videos are most likely not experienced fire arm owners and needs a better step by step guide, with close up shots.

[@unixfool]

darkcg79 have you read our US Constitution? Have you read the 2nd Amendment? The ownership and bearing of arms "shall not be infringed". Everything you've said is an infringement. The right protects against rogue government. If other countries do without such a protection, that's their problem. Worry about yourself. This aspect of our life is none of your business.

[@sethtenrec6476]

+Busta Cap have you read the Second Amendment? Do you know what the second and third words of the Second Amendment are? hint: "well regulated". In other words, regulations do not infringe upon your rights!

[@nialljamesbuckley]

+seth tenrec do you think you just blew the lid off of decades of debate with your 15 seconds of googling and reading? Maybe YOU should continue reading and figure out what we’ll-regulated actually means in the context of how it was used.

[@hooliganhighway6219]

@@sethtenrec6476The phrase "Well regulated" refers to "in proper working order" like a well-regulated clock, not referring to government regulation. "Well regulated militia" refers to the majority of the populace being proficient with weapons. Source: www.constitution.org/cons/wellregu.htm (Well regulated meaning during the time the 2A was written) Quote about the 2A by an actual founder; this makes it pretty clear who the militia is and what the purpose of the 2A is: “𝘞𝘩𝘰 𝘢𝘳𝘦 𝘵𝘩𝘦 𝘮𝘪𝘭𝘪𝘵𝘪𝘢? 𝘈𝘳𝘦 𝘵𝘩𝘦𝘺 𝘯𝘰𝘵 𝘰𝘶𝘳𝘴𝘦𝘭𝘷𝘦𝘴? 𝘐𝘴 𝘪𝘵 𝘧𝘦𝘢𝘳𝘦𝘥, 𝘵𝘩𝘦𝘯, 𝘵𝘩𝘢𝘵 𝘸𝘦 𝘴𝘩𝘢𝘭𝘭 𝘵𝘶𝘳𝘯 𝘰𝘶𝘳 𝘢𝘳𝘮𝘴 𝘦𝘢𝘤𝘩 𝘮𝘢𝘯 𝘢𝘨𝘢𝘪𝘯𝘴𝘵 𝘩𝘪𝘴 𝘰𝘸𝘯 𝘣𝘰𝘴𝘰𝘮. 𝘊𝘰𝘯𝘨𝘳𝘦𝘴𝘴 𝘩𝘢𝘷𝘦 𝘯𝘰 𝘱𝘰𝘸𝘦𝘳 𝘵𝘰 𝘥𝘪𝘴𝘢𝘳𝘮 𝘵𝘩𝘦 𝘮𝘪𝘭𝘪𝘵𝘪𝘢. 𝘛𝘩𝘦𝘪𝘳 𝘴𝘸𝘰𝘳𝘥𝘴, 𝘢𝘯𝘥 𝘦𝘷𝘦𝘳𝘺 𝘰𝘵𝘩𝘦𝘳 𝘵𝘦𝘳𝘳𝘪𝘣𝘭𝘦 𝘪𝘮𝘱𝘭𝘦𝘮𝘦𝘯𝘵 𝘰𝘧 𝘵𝘩𝘦 𝘴𝘰𝘭𝘥𝘪𝘦𝘳, 𝘢𝘳𝘦 𝘵𝘩𝘦 𝘣𝘪𝘳𝘵𝘩𝘳𝘪𝘨𝘩𝘵 𝘰𝘧 𝘢𝘯 𝘈𝘮𝘦𝘳𝘪𝘤𝘢𝘯… 𝘛𝘩𝘦 𝘶𝘯𝘭𝘪𝘮𝘪𝘵𝘦𝘥 𝘱𝘰𝘸𝘦𝘳 𝘰𝘧 𝘵𝘩𝘦 𝘴𝘸𝘰𝘳𝘥 𝘪𝘴 𝘯𝘰𝘵 𝘪𝘯 𝘵𝘩𝘦 𝘩𝘢𝘯𝘥𝘴 𝘰𝘧 𝘦𝘪𝘵𝘩𝘦𝘳 𝘵𝘩𝘦 𝘧𝘦𝘥𝘦𝘳𝘢𝘭 𝘰𝘳 𝘴𝘵𝘢𝘵𝘦 𝘨𝘰𝘷𝘦𝘳𝘯𝘮𝘦𝘯𝘵𝘴, 𝘣𝘶𝘵, 𝘸𝘩𝘦𝘳𝘦 𝘐 𝘵𝘳𝘶𝘴𝘵 𝘪𝘯 𝘎𝘰𝘥 𝘪𝘵 𝘸𝘪𝘭𝘭 𝘦𝘷𝘦𝘳 𝘳𝘦𝘮𝘢𝘪𝘯, 𝘪𝘯 𝘵𝘩𝘦 𝘩𝘢𝘯𝘥𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘱𝘦𝘰𝘱𝘭𝘦.” - 𝘛𝘦𝘯𝘤𝘩 𝘊𝘰𝘹𝘦, 𝘛𝘩𝘦 𝘗𝘦𝘯𝘯𝘴𝘺𝘭𝘷𝘢𝘯𝘪𝘢 𝘎𝘢𝘻𝘦𝘵𝘵𝘦, 𝘍𝘦𝘣. 20, 1788. TLDR: ur wrong

[@northernsurvivalbackcountr4986]

Agree he did it quite quickly n didn't say much

[@warjacaviation]

When I try to put my cam block back on my compact PX4, I have to work at getting it to seat properly. I notice that you seemed to have the same difficulty, but the video did not show you completing the cam block install. Good video.

[@MrSpleenweasel]

I just got my compact yesterday as a matter of fact.

[@texassalt8999]

easy peasy! Thanks!

[@mattcullison3215]

I bought the px4 storm subcompact and I had it for a week put about 30 rounds through it and I cleaned it the next day I went out to shoot it and the pin that holds the slide on came flying off and would not stay in so I had to send it in for warranty repair so when I get it back I will do a review on here on the whole experience

[@dawudasha977]

I'm about to buy one used from private party. What should I look for in regards to full functionality and excessive wear?

[@doaknife9161]

I got one of your Beretta FS 29 on the bottom of your magazines on the square side there is some sharp edges on there how do you deal with that other than sending the magazines back to you for new bonds can you take a light green sandpaper and shave them down a little bit or what make a video on this please

[@IRONSTORM4]

Can you do a video on what the low profile slide release and slide safety that is offered through Beretta to change the type F firearm into the type G look like when installed?

[@kd3]

nevermind i just realized that i assembled the spring incorrecty. this is an awesome firearm never had any problems besides this one user generated error. thanks anyway

[@hancock63]

Thanks for clearing that up.

[@bettersteps]

Where can I find a PX4 Sub Compact Cam Block Assembly? Not sure where I lost mine, but it's gone. I have the Enrest Langdon 9mm PX4. Is it the same block assembly as the regular sub compact PX4?

[@DominicanStyles]

Thank you for this video... Very Helpful!

[@popsmccartney435]

What brand of oil to use?

[@dannman420]

I'm thinking about changing out my trigger for your guys competition trigger for my PX 4 subcompact but I don't see any videos on KZbin explaining how to

[@felixfixit]

Slide catch engages in the middle of a magazine, will usually do it 3 or 4 times in 13 rounds. Should there be a spring that returns the catch to the lower position or is it just gravity controlled until the magazine is empty? Love the weapon, just can't depend on it right now. Any suggestions would be appreciated. p.s. I use the Beretta cleaning kit, and throughly clean after each range trip. PX4 Storm Subcompact.

[@juandiegas8211]

The compact PX4 Storm has a plastic recoil spring guide. It seems to be a really cheap piece of toy plastic unlike the rest of the gun. Has this ever ended up being a problem?

[@russelllisesr2142]

I love my Beretta 9000. I am looking at the PX4 compact. would I love it? why did Beretta stop the 9000?

[@CoachPank53]

I have a question , if I order my sub compact storm and request a metal guide rod prior to it shipping can it be shipped to me with it ? And have you heard of a new trigger system that allows us to replace the plastic trigger with more reliable metal? These are questions I've heard other clam to have had done ....I'm asking the source ....great series thank you for your time .

[@budeades]

any advice on cleaning beretta magazines? break in time for new magazines?

[@kendalldavis142]

ok so upon field stripping my beretta px4 40 cal the spring popped out along with the decocker. i placed it back in and now after cocking it, it gets stuck as if i placed the decocker in the up position. i tried this maintenance but i did not change anything and the round gets stuck what do i do?

[@ryansannes3099]

Hi I just got the Beretta px4 storm full size in 9mm and I have about 30 rounds thru and when I cock it and its in SA the trigger is scratchy and will hold for the first few mm is this normal

[@TheBronze333]

Eric During a cleaning session of my PX4 subcompact 9mm I lost my slide stop spring. I have ordered a new one through Brownells , however my question is can i operate this weapon without the spring?

[@rajvosa71000]

I love my PX4 compact, but I don't like that I cant put any night sights on it like Trijicon HD or XS :(

[@dacna01]

Having the FTF issue. Yukon Corneilus recommended cleaning with solvent then oiling. Is using a solvent safe? If so, what? Also read about issue with mag spring. Gun shop said to leave mag loaded. I did notice easier to load. Any advice?

[@bean5824]

Also please point out what parts belong to which words

[@mrstealyogirl2684]

Nice can you do the 40 Caliber one

[@mikeskidmore6754]

I bought a used Sub Compact . the first round I fired it did not eject the empty casing 9 mm.. I had three full magazines had issues with empty casings not ejecting and loaded round jamming say 3 times with each magazine.. I did the basic break down and cleaned and lubed but it was cleaned and lubed when I purchased it.. I can't see anything wrong with it .. I looked on shooters blogs and all they talked about was wrong ammo .. it's 9 mm x 19 the most common 9 mm ammo ... I am at a total loss why it's so unreliable .. Will have to depend on a Ruger for a carry gun no issues with that round and round no problems .. it's smaller more compact single stack 9 mm.. I like many of the features of the Px4 I would have preferred the full size with 4' barrel .. I did also clean a Taurus PT 111 Pro I have had for many years.. it's chamber was a bit loser than the Beretta was.. 115 grain ammo two different brands..ball

[@terrancecorella1965]

Use better ammunition

[@terrancecorella1965]

You get what you pay for.lpl jk

[@bettersteps]

That component he has in his right hand at 1:44. I have the spring but I lost the long camm block assembly and it's impossible to find. Anyone know where I can find one?

[@Mojo32]

Brownells possibly.

[@jimmyvelez4289]

Donde puedo conseguir unos repuestos de la Beretta. Px4 una pieza que es de la corredera

[@bigguy8]

I just bought my first Beretta and first firearm ever this month I fired it once so far about 130 rounds and change i have been hesitant on cleaning until I found this official Beretta video now I just want to know what solvent and lube do you recommend for Berettas I really don't want to use hoppes and rem oil I'd like something better though it's readily available

[@rogeliotorres6002]

king hippo beretta has a small kit for cleaning and lubricate at there website, beretta usa. This is where I bought my oil and cleaning kit for my px4 compact, all made for the beretta's firearms.

[@rogerknight2267]

Gunfighter lube. And what’s wrong with Hoppes No. 9??? It’s been around longer than me.

[@SeddahSeddah]

Does the px4 storm inox come in the .46?

[@user-ll5on3sw2t]

I would learn more off of a regular joe

[@johncasali3079]

❤

[@hancock63]

Does the 4 in PX4 stand for something?

[@codyendecott6326]

Bought my px4 storm compact 2 days ago. Today I put 100 rounds through the firearm with about 10 failure to feeds. Also my feed ramp on the frame seems to be really rough. How do I contact beretta?

[@BerettaCommunity]

Cody Endecott call us at 800-BERETTA ext 2003 mon-fri 9am-5pm ET

[@GNJ1118]

I heard I don't know how true this is but I heard you have to clean the berettas before you shoot them.

[@rogerknight2267]

Never fire a new weapon until you give it a good cleaning and lube job first. Otherwise, you are firing a dry weapon with lots of debris from the manufacturing process.

[@robertstephens4294]

I'd like to know how to move the magazine catch to the Left side

[@BerettaCommunity]

It's described at page 81 of the gun's instruction manual. You can find a copy of the manual here: www.beretta.com/en-us/service/documents-usa/

[@AbsynthianPsychosis]

How much does the 17 round magazine stick out when used in a compact 9mm? I can't seem to find anything on the size difference between the two different capacities.

[@Boobtube.]

about 1/2 inch. you can buy a 20 rounder end plate(+3) and spring from berreta. Than install it, using your original 15 round spring onto a stock 15 round mag. This will get you a 18 round mag that fits and looks perfect(no gap) on you compact storm. Beretta sells this (+3)end plate for the factory full size 17 round mag, to make it a 20 round mag. But you can just modify a 15 round mag from your compact with this part, to make your compact hold 3 more rounds and have it look professional like it was made for the gun. I do not know why beretta just does not sell 18 round extended capacity mags for the compact like they sell 20 round extended mags for the full size. So, just make your own. just be sure to use the original 15 round spring with the extended end plate as compressing the 20 round spring for a 18 round capacity might not work out to good. I did this and there are no FTF or FTE issues. Gun fires perfect with a custom made 18 round mag that fits the compact like a factory fit.

[@giants11x]

What lubricant brands does Beretta recommend for the PX4 Storm? I mean I know there's all these different brands out there claiming they are the best (Break Free, Frog Lube, M Pro 7, Tetra, Birchwood Casey, etc...). And does Beretta recommend gun oil or gun grease?

[@BerettaCommunity]

Here you go: www.berettausa.com/en-us/beretta-genuine-gun-oil-25ml/ol32000209/

[@jondaiten]

im new to all this is it recommended to put lubricant inside the magazine ? i got a new one and the spring fells kinda stiff and feels like the bullets have a lot of friction inside against the mag .

[@rogerknight2267]

No. Use the hell out of it.

[@walteredwards8666]

not able to find magazine. called company not in stock and do not know when i can get magazine date 3/20/2024

[@55418und]

My PX4 Full size stove pipes. My 92FS never does. Why?

[@rogerknight2267]

Clean and lube.

[@jonathanclaypool563]

Is it ok to dry fire a px4 full size consistantly for training purposes ?

[@DeCavalcante]

just get some snap caps from amazon to be safe.

[@buzzclark]

Hi Eric. I just subed & liked. I have a magazine compatibility question. Can you use the magazine from the Beretta 92FS in the full size Beretta Px4? Thank You. Sincerely, JAMES.

[@BerettaCommunity]

+Buzz Clark Hi, James - The Px4 and 90-series magazines aren't compatible, unfortunately.

[@matthines5678]

Has anyone used there Px4 9mm mag with 40 caliber rounds in it ...in a Px4 40

[@rogerknight2267]

Own a PX4 Storm? First thing to do is get rid of the plastic recoil spring rod. Contact Beretta for an all metal replacement. My PX4 Storm.40 was my concealed carry for years until the rod totally disintegrated at the range one day. I replaced it with an all metal rod from Beretta, but lost confidence in the weapon. Moved on to a S&W M&P 2.0 in a .40 cal.

[@elusive_wil5684]

firing pin alignment???

[@neverminderic]

Im having problems non stop with storm px4. It's not dirty and was cleaned well. I use best ammo. The problem is I have to physical close the slide?!? It will fire afterwards but stop again in the same spot. Should I send it back? Any suggestions?!?

[@BerettaCommunity]

+Eric Ashley It's always hard to diagnose a problem without asking more questions. Please, call 800-BERETTA ext. 2003 (Mon-Fri 9am-5pm ET) and one of our technical reps will be able to ask all the right questions.

[@rogerknight2267]

Was it the recoil spring assembly??

[@MMAMaxim]

Does Beretta recommend bore snakes and Break Free Cleaner/Lubricant?

[@BerettaCommunity]

Yes

[@BerettaCommunity]

For a quick after range cleaning it's fine. For thorough cleaning I always recommend bore brushes and solvent.

[@sergeant_t2020]

I have new (2012-13) PX4 Storm 40 cal. After cleaning the pistol a couple weeks ago the gun will not completely feed from the magazine causing it to miss feed or no feed into the chamber. The slide will either stay open or will not eject the spent round. I have cycled over thousand rounds threw it before this stated happening. I notice that my slide lock pen does not engauge a round filled magazine correctly or when the magazine is not in the magazine well the slide lock pen is very lose like it want's to fall out. I shot 180 grain rounds threw it to see if that was the problem, it's not. I had to pull the slide back after every other round. Has this happened to anyone else?

[@chuckbuck7477]

I am having the same problem with my old lady's sub-compact. Did you find out what the issue is?

[@charlesfowlds8611]

Mine does the same...

[@daveknowl7286]

What is the little cup for that comes in the case when you buy a Beretta ?

[@BerettaCommunity]

+Dave Knowl It's placed in the box to prevent possible heavy weights placed on top of the gun box from crushing it, during transport.

[@LYLEWOLD]

+Beretta good to know. i never knew what that was for. love my berettas. any chance of getting the whole storm lineup back on california's lame roster?

[@BerettaCommunity]

No immediate plans, but we'll do what we can to pass it on

[@manuelsaavedra7554]

good

[@psycold]

Can I use my 20rd mags from my full size Px4 with a compact model?

[@BerettaCommunity]

It Will stick out

[@psycold]

Beretta Ok, thank you for the reply.

[@rickemery8968]

My PX4 Storm full has a 17 round magazine, NOT 14 rounds.

[@BerettaCommunity]

You probably have the 9mm version. The 40 cal. models have 14 rounds

[@rickemery8968]

You are correct - I have a 9 mm. Any chance you could find out for me when the PX4 Storm Compact Carry 9 mm will be available with the Type F decocker AND safety?

[@BerettaCommunity]

You can turn your G-model Compact Carry into an F model by using conversion kits (one of them is here: www.berettausa.com/en-us/safety-assy-px4-f-large-le-part-c5d666-c5d667/c8a000/) The drawback is that you will lose the 'low-profile' lever.

[@rickemery8968]

Thanks, I had heard that this was possible, but when I spend $900 on the new Compact Carry pistol I am going to want the low profile levers. Plus the link says this part is out of stock.

[@rickemery8968]

Thanks, I really do appreciate your input. I found a PX4 Compact Carry 9 mm that I want to purchase and the current $75 rebate helps. But, everywhere I looked it said that these conversion kits are always out of stock. There are a lot of complaints online about the lack of availability. There are also a lot of comments about very poor Beretta customer Service so now I am a little apprehensive. Most of the complaints regard the finish coming off the pistol so I am optimistic that with this new model that will not be a problem. Any advice on how to get one of these conversion kits if Beretta doesn't ever have them in stock and the other outlets all say "Out of Stock"??

[@anthonycenteno319]

I just purchased a 9mm Px4 Storm and out the box the gun does not properly rack. The slide gets jammed when trying to rack. I can see the bullet attempting to fit into place but the slide needs and extra push to rack. I oiled it and took it shooting in hopes that it just needed to be "broken in". On the range the gun fires and then jams after to shots. I continued to rack it manually pushing on the slide whenever it jams. I am very disappointed that after firing almost 100 rounds it continued to jam. Please let me know what I can do to fix the problem. Thank you. - Anthony

[@DirkHooper]

How do I get one of those sweet Beretta polos?

[@BerettaCommunity]

You can find it on BerettaUSA.com

[@DirkHooper]

Thank you!

[@bandzwilliams5980]

do these take extended mags like30 round

[@BerettaCommunity]

We do not sell 30 round magazines for the Px4 series, at this time.

[@christopherroberts7559]

Bandz Williams they do make a 20 Rd for 9mm, and 17 rd for 40

[@johnprice8201]

I believe you are in error about the capacity of the full size mag.

[@peachtree_productions]

Your editor cuts too soon on vital moments that the viewer ends up missing. You should have a 3rd angle on a telephoto lens showing closeups of what you are doing

[@sfk1066]

7 years later and they still haven't replaced this video with a more detailed oriented one. Disappointing still.

[@bluelightningrod1]

What's with those eyes at 0:12?

[@Boobtube.]

do you know when the smaller decocker levers will be available? they are out of stock on Beretta web site.(type G change over kit)

[@BerettaCommunity]

We are waiting for production to restock.

[@cromas]

This video shows how to strip the gun but totally glosses over how to clean/lube a gun. "Focus on these parts". Focus on them and do...what exactly?

[@brandonwalker5970]

he forgot to clean inside the barrel.

[@erazimoth]

No, you only have 2 sizes! The Sub-compact is in hiding or something :P

[@jeffreyhurst9552]

I agree. Too fast. Slowww downnn.

[@dareisnogod5711]

CAMERA WORK IS NOT GOOD ENOUGH BECAUSE YOU RUSHED THRU YOUR LESSON.

[@scampiscampai]

Fast "cleaning".....i hope u dont clean ur house like u clean the gun 🙈

[@joelvargas3635]

Cleaning his gun and is already out of breath feels bad man...

[@uncleartax]

This dude aint packin no compact! His arteries could probably use some self defense options

[@OldGrowthRedwood]

Poor video. Too fast, can't see what he's doing. Doesn't describe products. Bad all around.