Not even kiddin.... Going to buy one right now At KMS Tools.... I think it was the cob that swayed me....
@augielimon70295 жыл бұрын
Use a flame defuser for your wood projects. Better results and highlighted grain patterns.
@usernamemykel6 жыл бұрын
Corny! Very corny! Loved that part! QUESTION: Would you please describe the Map-Pro+O2 setup? Thanks!
@CarlosCastro-ml6lv4 жыл бұрын
How much time of ininterrupted use will last one of these containers?
@abstractapproach6344 жыл бұрын
It took under a hour to drain mine most of the way, but I'm sure it depends almost entirely on torch design. I'm using the one with the hose. It was like 60 bucks, I don't know the model number off hand
@monsterthekid10816 жыл бұрын
That was enjoyable 👍👍😂😂😂Shop Corn👍👍 Shop Pizza 👍👍👍
@diegodelgado97645 жыл бұрын
Yum with all the mapp flavor the kids love
@victorcastle18404 жыл бұрын
So is Mapp gas any hotter than , the Propane tanks or are they about the same ?
@MattsGreatHall4 жыл бұрын
Awesome. Very helpful too. Thanks!
@carlnikolov4 жыл бұрын
Solder and heat shrink in one tool. Neat
@themadscientest5 жыл бұрын
I have a manual light pencil flame torch and a manual light extra wide flame torch, both are good for "normal blowtorch stuff" but when they shine is with a simple banana and sugar!
@joshneal29203 жыл бұрын
Shop Corn... LMAO GENIUS
@Anthony-qj7qe5 жыл бұрын
Heating up that pizza sold me!
@josebuenfil75597 ай бұрын
Gracias
@ThoughtIwasFishin3 жыл бұрын
How do I stop it from going out when I turn it to the side or upside down? You can't keep it up right the whole time.
@squidlings2 жыл бұрын
Me watching : pauses : goes to garage to get dad's mapp gas to warm up pizza : me eating pizza and watching.
@squidlings2 жыл бұрын
🍕👀
@scottjames95103 жыл бұрын
Gave like just for the corn
@Christine-7774 жыл бұрын
What?!! Love this! Thankies ever so!
@oneson6gmailcom3 жыл бұрын
nice!
@iliketurtles29934 жыл бұрын
What torch is that with the oxygennnn and map proooo
@opalbaby81014 жыл бұрын
using mapp vs mapp with oxy is there any real benefit when brazing ?
@stoner84406 жыл бұрын
What braising rods do you need for 1018 steel ??? Plz
@usernamemykel6 жыл бұрын
One braises meat, not metal.
@talkthetalkwalkthewalk4710 Жыл бұрын
I'd rather climb a mountain without shoes than the process of cooking corn this way.
@JM-nf4rj5 жыл бұрын
Hello, would the Oxy torch be able to melt Brass, Copper, Bronze? (6063 AlMgSi I consider 100% able, right?) For small castings - in grams, like rings, small gears, etc? Is there any possible option from your product range? Like the smaller portable burner? Thanks! @bernzomatic
@abstractapproach6344 жыл бұрын
I'm learning this now with map pro, it seems like a good well insulated crucible holder is key. Also glazing the crucible correctly seems important. I have one failed copper melt so far and I just glazed a new crucible today. I'll let you know how it turns out if anyone's interested.
@orsoncart94415 жыл бұрын
If you buy one of these make sure you always have at least two oxygen canister before starting a job. It is the oxygen that runs out really quick. To braise up a hole in say an exhaust witha peice of 30mm square steel you might do it wth one bottle of oxygen but I would say two bottles would be more like it. These kits are expensive to use due to the expense of the oxygen. But they are good if one needs intense heat on say a nut or bolt.
@ngtaiwei12207 жыл бұрын
Incredible !!
@diversity27395 жыл бұрын
great!
@55tmilam3 жыл бұрын
I’ve been a jewel eBay trade since 1991 and I use a small torch every day. I’ve used my torch to heat up food many times! Also used it to roast marshmallows!
@victorcastle18404 жыл бұрын
I just saw where a certain date, that Mapp gas and propane gas is the same now. Is that true ?
@markharrisllb4 жыл бұрын
victor castle MAPP has propane in it, it’s what the last P stands for, the M stands for Methylacetyline (not sure if a spelt that right). I can't remember what the A and other P stand for but I’m sure it’s easy to google. It has a copyright and the name is owned by one of the major companies.
@victorcastle18404 жыл бұрын
@@markharrisllb : Thanks
@WeekendAtRennies2 ай бұрын
Shop corn🔥🔥
@jorgeg9226 жыл бұрын
this was great!!
@kadevohn5 жыл бұрын
I promise you that corn tasted like ass. Using those torches directly on food works for those with no taste buds.
@DragonBuilds5 жыл бұрын
Why does using a torch directly on food leave a bad taste? It looks like grilled corn to me but I have no cooking knowledge.
@WackadoodleMalarkey4 жыл бұрын
Torch some doobage and everything tastes great
@bjornegan64213 жыл бұрын
which is why they're used in almost all michelin starred restaurants... i'm not as disappointed by your comment as i am about the 6 likes your comment has received.
@beautifulsmall4 жыл бұрын
I want shop corn
@eluminateoccultis19665 жыл бұрын
How long do tanks last
@orsoncart94415 жыл бұрын
Years if you don't let the gas out. But if you do the gas runs out in say 5-7 mins depending on what you are doing. If you buy one of these make sure you always have at least two oxygen canister before starting a job.It is the oxygen that runs out really quick. To braise up a hole in say an exhaust witha peice of 30mm square steel you might do it wth one bottle of oxygen but I would say two bottles would be more like it. These kits are expensive to use due to the expense of the oxygen. But they are good if one needs intense heat on say a nut or bolt.
@juancamarena20883 жыл бұрын
Number one use is for dabbing
@appreciativeobserver47326 ай бұрын
Pizza & Corn. What more could a guy want. Well maybe ........
@Bernzomatic18765 ай бұрын
Thank you for contacting us, please email us at bernzomatic@wthg.com for further assist.
@rdubby11027 жыл бұрын
How can I get sponsored?
@rdubby11027 жыл бұрын
Because I'd be happy to do something.
@Z-Ack3 жыл бұрын
Can it be used for sexy time??
@moonolyth5 жыл бұрын
oxy tank runs out very very quickly at the price Id rather use propane tank so I can take a nap while it comes up to heat and still be ahead $$$. Sorry.
@WackadoodleMalarkey4 жыл бұрын
Wow is it that bad? I was hoping to get something to fill the gap between just MAPP and my big cutting torches. How many oxygen cylinders do you go through to 1 fuel cylinder?
@BTCNSDAP5 жыл бұрын
thats a mandella effect. Its always been BENZO Matic, now its bernzomatic??????
@abstractapproach6344 жыл бұрын
I agree, and it's cool to see another crypto enthusiast looking up torch stuff! How's it going man, I'm learning to melt gold what are/were you up too?
@BTCNSDAP4 жыл бұрын
@@abstractapproach634 howdy brother!!! I blow glass. My Instagram is @kushkirt
@wilcooley4 жыл бұрын
Glad I am not the only one who until recently believed it was "BenzOmatic" instead of "BernzOmatic"... I wonder if it's because I only just started paying attention to them or if the logo was changed in some way that makes it easier notice the "R" with a casual glance.
@silverwindspirit4 жыл бұрын
Haha shop corn!
@Stump515 жыл бұрын
Benzo paid for vid. Sycks, sucks.
@miguelmedina19913 жыл бұрын
You could shave with it, but it's not recommended
@art1muz134 жыл бұрын
a pepe special kinda guy!!!
@CrisDFF309172 жыл бұрын
So safe. :/
@roddyoccultis42663 жыл бұрын
When I worked for NASA, I used one to light rockets into space.
@Stump515 жыл бұрын
The corn trick was a stupid ass trick.
@YTViralFacts244 жыл бұрын
Dude was just having fun
@Acidburn31417 ай бұрын
For the love of god stop using a torch to “solder” electronics/wires 🤦♂️🤦♂️