K series Mfactory and Gear X input shaft issue !!!!

[@djcutnpaste]

Props for making a detailed video and walking through the issue and solve. A lot of people won't take the time to do this.

[@Bertayham]

I’m glade you noticed the details 💪🏽💪🏽. Thanks

[@TrackSol]

Great info. I only suggest to go ahead and say what the problem is without dragging it out. That whole part about “look at the splines of the shaft, can you guess what can be a problem” part is annoying.

[@ShooterMcgavin6]

This was 4 years ago did any of the revisions fix this

[@Fk8td]

1800 on a gear set is dirt cheap. Fk8 gear sets are 6200 for 1-5 from ppg. However you get what you pay for. No issues with ppg.

[@NsanityGarage]

Wow thanks for the heads up Will keep this in mind for my mr2 build Keep up the good work

[@orlandom1041]

Yo tengo un problema parecido yo monte mfactory y cuando está montada suena como si fuera una bomba de power steering pero si meto el cloche no suena ni el doble disco ni la transmisión

[@corypeaslee3865]

What would you recommend for gears? And how much do they run?

[@Cloneufc]

I know you should not have to, but many machine shops respline transmission input shafts and axles for around $75.

[@Boosted_CitrusFb6]

that was the most satisfying outcome ever😂 that was probably a major relief for you 🙏🏾

[@gmadgengarage]

I’ve been hearing a lot of mix reviews on Action Clutch.

[@Kallaus_built]

Think this would be an issue on a single disc clutch?

[@Bertayham]

No not at all

[@bigdaddyvtec]

No it wouldn't have on the early ones.. the early ones again werent made forntwins. The new ones are and you don't have to run this shitty disk

[@erict8600]

i was doing some research on a new set of gears and came across your video, super helpful. thanks! how has the mfactory gears held up so far? do you know if this is the same issue with other twin disc such as competition cluch (i would assume its the same)?

[@Stonerxiong]

Did gear x or mafactory fixed the issue?

[@Bertayham]

No they did not

[@bigdaddyvtec]

Nonidea about mfactory. GEAR x kits have a deeper spline and the input shaft is the same diameter all the way past engagement. His is a nonissue and its stronger

[@totin787]

Have they fixed the issue

[@Kenneth1350]

Oh man you saved my pocket I was gonna order the same kit like you but thank god you made a video about the issue.

[@Bertayham]

Stay away from this crap. Save little extra and buy ppg or graf..

[@bigdaddyvtec]

This video is smoked it's not gear x.

[@bigdaddyvtec]

This is an mfactory kit. The GEARX kit is twin compatible. Early versions were not designed for twins. I had jeff get the factory to change the spline depth. All of the new ones let the 2nd disk float corectly. All the new gear x kits are fixed and there are 0 issues No idea about mfactory. They're not the same mfg. Trust me I know. I've installed 50 of these Maybe you should have asked before making a video about it. You dont need a special clutch

[@TheHondaHub402]

@@bigdaddyvtec couldn’t have said more true words. Jeff is amazing! The best customer service I have ever experienced as well. My spines look amazing in my input shaft and fit my comp clutch twin disc perfectly. 0 issues here. He shouldn’t have ever grouped gear x with this video based off them running the same gear ratios 🤣 good info on mfactory but terrible misinformation on his part towards Jeff and gear x.

[@bigdaddyvtec]

@@TheHondaHub402 I work very closely with jeff

[@DragK20Civic]

Get to the point, this video should be about 3 minutes long.

[@chriskellen6499]

i know I'm kinda randomly asking but does anyone know a good site to watch new tv shows online ?

[@jagermeisterNY]

Do ur own video mf

[@ikaseig2214]

very good information thank you 👍

[@Bertayham]

Of course!

[@TheHondaHub402]

Must only be mfactory. It won’t let me post photos but my gear x 1-4 is absolutely not like this. Sure they might have the same gear ratios but that doesn’t make them the same product. Two different companies.

[@kyronfagan]

First gen gear x had this issue.. i machined my shaft after breaking one of my clutch disks.. took me a while to figure it out.. and yes it was gear x!

[@jagermeisterNY]

@@kyronfagan i have twin disc,, so if i buy the GearX I’ll still have this problem??? Or did they fixed the problem???

[@kyronfagan]

@@jagermeisterNY mine was from the first set... they made a 2nd gen.. so you should be good

[@juancl3651]

Different input shafts gear x and m factory

[@Bertayham]

If you say so

[@geoffreym2769]

God your presenting this so slowly, most of us can keep up when it's a little quicker. The flywheel dictates where the clutch sits obviously the imput shaft is designed for a different flywheel

[@raulwelder100]

Did mfactory reach out to you after you showed the problem to say anything or do anything?

[@Bertayham]

I reached out to them factory directly and then they forwarded me to a company called Synchro tech. Smh I will never purchase a product they again

[@raulwelder100]

@@Bertayham that's s dam shame but good to know, thanks for the information

[@MrMelvin345]

@@Bertayham synchrotech is the best carbon synchro maker atm.. surprised you dont know who they are.. Now for my own suprise, i didnt know they the ones that make these gears..

[@bigdaddyvtec]

Fuck Mfactory. I stopped selling their sets because they broke below power levels rated for and they wouldnt do shitt. Again gear x and mfactory aware not the same thing m factory just copied Jeff's shit. They dirty likenthat

[@wickedsatan1]

@@bigdaddyvtec who Jeff?

[@ekmikeymike1833]

thanks bro

[@sickek4]

Ppg and never look back

[@machomacho3634]

Stick with the best my man

[@Bertayham]

I’ve learned thst

[@machomacho3634]

I have Action Clutch on my vehicles and I have no problem with them it's a quality made clutch and I love it

[@TheHondaHub402]

Very good info but you Deff should not be grouping gear x with the issue. Your basing that based off them running the same gear ratio setup as mfactory does. Alot of companies have the same gear ratios but have completely different manufacturers. I run the gear x drag 2 1-4 k series gear set with a 5th gear cuff and a gear x 4.0 final drive. My spines are completely different than these and look the same as oem ones. And my gear set is amazing. If anyone wants proof you can respond to this and I can send direct pictures to eliminate gear x from this conversation lol. Mfactory sold you a flawed input shaft. Not gear x.

[@Hello_its_me_mario]

I was just wondering the same thing. Im about to het a set of gear x 1-4 also.

[@MrTDM09]

I'm actually looking into getting another set. Only this time I'm doing the work, I made 688 on my red DC5. I'm surprised I made it through honestly Thanks for the video my dude. Sub'd

[@MrMelvin345]

he lied about the trans weight haha... only 89lbs