Intro: 0:00 Parts List: 1:47 Install: 3:57 Sound Test: 10:45
@chriswicks124 Жыл бұрын
Do you have a parts number for the toyota wiring? The amazon link you added isn't for toyota.
@antdo Жыл бұрын
amzn.to/41l1atI This should be it. I fixed the link as well.
@chriswicks124 Жыл бұрын
@@antdo I appreciate it!
@antdo Жыл бұрын
Sorry. Seems like my mic was going in and out. Time for a new one. 😅
@ThegodofStarecraft Жыл бұрын
the red horn match with the color theme very well!
@antdo Жыл бұрын
💯
@paull532011 ай бұрын
Thanks for posting this, installation was a breeze because of it! That oem horn is simply a safety issue. Now it sounds like a truck horn haha
@davidjudd1852 Жыл бұрын
This is mod is 100% needed on all Corollas !
@antdo Жыл бұрын
I agree 💯
@not12listen6 ай бұрын
The relay is there for the purpose of doing everything possible to give each horn as close to 100% of the requested power for full volume. The shorter the run from power to the device the less voltage drop occurs. Also, the large gauge wiring, the less resistance to conducting electricity, which means less voltage drop. Without using the relay, you're splitting the available power (10amp in the GR Corolla) in half per horn. If both horns are 5amp draw, then there is no issue. If the horns are 6amp draw, you'll pop your fuse, as that would be 12amps being pulled across a 10amp fuse. Aside from that, due to the cable run - horn switch, to the fuse, to the horn - you're losing electricity the entire way through, which means your horns are not getting the full amount of amps needed to work at full volume. Relays of that nature that I've seen tend to be rated for 30amps. Being that the battery lead (power) is behind the left headlight, the power run from power, to the relay, then to the horn is incredibly short. You can go a bit overboard with 10gauge wire and you've just set yourself up with a situation where you can put in a louder horn (draws more amps) without having to go back and redo wiring.
@bennychan723able Жыл бұрын
always love Hella Tone Horns!!!! GOOD STUFF!!
@antdo Жыл бұрын
Thanks!
@Thrust83 Жыл бұрын
Great install! That harness made it 100% easier!!
@antdo Жыл бұрын
Thank you! 🙏
@travismccoy228210 ай бұрын
Thanks for the video I did mine. I use two bolts and nuts and used the holes that they had that were already there .got them centered. Pretty cool.
@antdo10 ай бұрын
I'm glad the video helped.
@davn77239 ай бұрын
How did you get it center? you drill?
@travismccoy22829 ай бұрын
@@davn7723 there’s a hole right next to the factory one but no drilling. You’ll be able to see it when you get in there.
@bobbylauz11219 ай бұрын
Thank you brother, very informative i was able to finnally get my horn working you the man thanks for the easy explanation! You earned a sub
@antdo9 ай бұрын
Thanks! I'm glad the video was helpful!
@jasond91 Жыл бұрын
Thanks for this video! I'm doing this asap
@antdo Жыл бұрын
Thanks for watching
@UntraceableFilms Жыл бұрын
thanks for all the help ill be installing mine tomorrow
@antdo Жыл бұрын
I'm glad the video was helpful 👍
@CarlosGarcia-uq2uw Жыл бұрын
Are we just going to ignore that fact he is doing a mod all Subaru owners do in a Subaru Jacket lol.
@antdo Жыл бұрын
😅😅
@jimmyvu6919 Жыл бұрын
You forgot the vape!
@mallorca6297 ай бұрын
Great Video! Thanks for sharing
@antdo7 ай бұрын
Hopefully it was helpful!
@alex.n22 Жыл бұрын
Great video. Very well detailed
@antdo Жыл бұрын
Much appreciated!
@alex.n22 Жыл бұрын
No problem. Keep the videos coming.
@evolvng Жыл бұрын
FYI: The red horns are "Supertone" and the yellow horns are "Sharptone". They make different sounds so before you go buying one over the other, do your research. I personally prefer the yellow horns since they have a deeper tone. Happy modding.
@AHDToys Жыл бұрын
Great install video.
@antdo Жыл бұрын
Thanks
@discountautosupply2638 Жыл бұрын
We remember you doing the Mazda install in our garage
@antdo Жыл бұрын
🤍
@KenD2099 Жыл бұрын
I know you didn't want to drill into a new car. But man that horn not being symmetrical really bothers me lol.
@antdo Жыл бұрын
I'd rather it be off then start drilling into a car with less than 1000 miles
@JohnnyTranJTP Жыл бұрын
Seems really easy to install thanks
@antdo Жыл бұрын
No problem 👍
@cwarrowverseclips7967 Жыл бұрын
The DC Univers is the Best!
@antdo Жыл бұрын
You're misspelled Universe
@jacobconner3441 Жыл бұрын
I like good the red looks
@antdo Жыл бұрын
Thanks
@RADMANLIFE2 ай бұрын
There is another horn behind driver side head light ...
@ChristoKiwi28 күн бұрын
Hey Tony, How are these horns going one year later? Any rust?
@antdo27 күн бұрын
Currently as of right now. There doesn't seem to be any viable rust showing on the horns just by looking through the bumper. I'm about to install something that requires me to take off the bumper. So I'll inspect further once the parts arrive.
@ChristoKiwi27 күн бұрын
@@antdo Appreciate it!
@paulf.64293 ай бұрын
What gage wire did you use for the ground?
@rev_mitersaw Жыл бұрын
First, I did this mod. No it wasn't $4 for me. The original horn on the GR was crap, my Scion xD was better. I bought everything you listed, worked great. It's Hella (🤣) loud. But I will say this, use the old self threading bolt from the original horn and the original bracket from the stock horn. Most pleased. Awesome safety upgrade for $25 (for me, and I had a gift card.)
@davn77239 ай бұрын
Why the original bolt and bracket?
@rev_mitersaw9 ай бұрын
Because it fits perfectly into the support.
@joepham7004 Жыл бұрын
You just buy Hella Tone horns for all your cars don't you lol.
@antdo Жыл бұрын
😅
@davn77238 ай бұрын
Did you sand down the paint for the ground on the second horn?
@antdo8 ай бұрын
No i didn't have to do that.
@mazza9512 Жыл бұрын
the horns are 37$ for the pair today, but i think its a kit though.. with all the parts needed to install
@moisesmelchor3429 Жыл бұрын
Any reason why you have to ground it ? And not just connect like factory harness ?
@antdo Жыл бұрын
I mean I won't lie to you. I'm just going off the instructions. I don't Know the the factory harness Will ground this horn or not.
@rev_mitersaw9 ай бұрын
If you get the splitter you won't have to ground them.
@staceys33 Жыл бұрын
So we are doing Subaru mods on this car now?
@antdo Жыл бұрын
Yup!
@liudxdx Жыл бұрын
Damn I need to do this mod, wish the video was more clear lol
@alex.n22 Жыл бұрын
Unplug your old horn. Plug in your new one. Doesn't get much more clearer than that lol
@Stu32 Жыл бұрын
Any other harnesses you can recommend? The one in your list is on short term backorder.
@antdo Жыл бұрын
Did they message you about it being on back order? The site still shows it as in stock?
@Stu32 Жыл бұрын
@@antdo No, but its not shipping for at least 4 weeks.
@miket.8412 Жыл бұрын
That doesn't mean they are ok back order. It's not shipped by Amazon anymore. Their Amazon stock probably ran out after this video. So now the company has to ship it themselves and they probably just put a long wait time just in case. I have ordered stuff off Amazon that said they wouldn't be here for a 3 weeks but showed up in a week.
@Stu32 Жыл бұрын
@@miket.8412 and I’ve had Amazon products that were supposed to arrive in two weeks that never arrived. I’d rather find a different supplier than have someone who puts my order in the back because they can’t fulfill it at the moment
@alex.n22 Жыл бұрын
It's $12. If it's not here in a week just cancel it
@FeliceTo87 Жыл бұрын
😑
@anthonynguyen97798 ай бұрын
Today price of the horn is over $30.🤣
@Drseyazdrseyaz Жыл бұрын
Where is the Link 😂😮
@JohnnyTranJTP Жыл бұрын
It's in the description
@user-92614 Жыл бұрын
Definitely get parking sensors😂
@jacobconner3441 Жыл бұрын
You don't own a Subaru. Why would you do this mod?
@antdo Жыл бұрын
Because I want to
@BarbWaltersMusic Жыл бұрын
where does it say they are Subaru parts lol
@seannedelko3497 Жыл бұрын
Cause stock horn is weak AF. People don't even notice it.