Best Budget Wheel Stand? Vevor G29 Wheel Stand Review

Is a budget Sim Racing Wheel Stand for under 100$ really worth it?
Vevor sent me their Sim Racing Wheel Stand G29/G25/G920 for a product review, so lets find out if it can stand the forces of modern racing wheels and give us a good racing experience in Gran Turismo 7.
#vevor #review #gt7
Check out the Vevor Wheel Stand on Amazon:
DE (Affiliate): www.amazon.de/-/en/Steering-W...
US: www.amazon.com/VEVOR-Steering...
US Bevor Shop: www.vevor.com/racing-wheel-st...
Assembly instructions: • VEVOR G920 Racing Stee...
Wheels used in the Video: Logitech G25, Fanatec CSL Elite
My main Rig:
Fanatec DD1 Base with Podium F1 + Clubsport Pedals V3.
Follow my Affiliate Link for more information:
➡️️ Fanatec: fanatec.com/?FAP+B...
MY MICROPHONE:
➡️️ Blue Snowball ICE: amzn.to/2YIMS58
MY RACING SEAT:
➡️️ RSEAT S1: www.rseat-europe.com/RSEAT-S1...
SETTINGS:
➡️️ Transmission - Manual
➡️️ Traction Control - Off
➡️️ Countersteering Assistance - Off
➡️️ ABS - Default
Wheel: Fanatec DD1 Base with Podium F1 + Clubsport Pedals V3
WHEEL SETTINGS:
➡️️ SEN: AUT
➡️️ FFB: 39
➡️️ FFS: PEAK
➡️️ NDP: 40
➡️️ NFR: 1
➡️️ NIN: 10
➡️️ INT: OFF
➡️️ FEI: 100
➡️️ FOR: 80
➡️️ SPR: 80
➡️️ DPR: 80
➡️️ ABS: 80
➡️️ SHO: OFF
➡️️ MPS: ENCODER
➡️️ BRF: MIN
➡️️ Firmware: 447
IN GAME OPTIONS:
➡️️ Sesitivity: 1
➡️️ Max. Forcefeedback: 5

[@mr-white8798]

This was a surprise would be nice to se more if this kind if content along with the normal stuff.

[@andrewstrauber3017]

I have this wheel stand with a Gtech G29... with the addition of a wheel pan for a desk chair.. This is everything I need at the low level of sim racing that I am doing... I like vintage cars.. so if the wheel stand wiggles a bit when I am thrashing a MG-A.. I think it adds to the immersion.

[@thedubixcube]

I agree! It's not like a real car is going to sit perfectly still for you. It's going to fight you a little. I view the slight movement I've experienced as a net positive and, yes, oddly immersive.

[@gabesalazar5275]

Thanks for the review. Will this wheel stand withstand my Thrustmaster T-LCM loadcell pedals?

[@oscarmiller4135]

👍 Gutes Review

[@kenken-ss7jn]

Great rew, thanks

[@juriszakernicnijs3093]

Thank you!

[@Kancanx17]

i have the csl dd and clubsport shifter i dont mind screwing a hole for the csl dd but can the shifter mount on the shifter holder without screwing any holes?

[@deremu9241]

Genau so ein Gestell (nur ohne Shifter holder) habe ich mir damals auch geholt für mein Fanatec CSL Elite. Und was soll ich sagen?! Ich nutze es immernoch. 😅

[@stupidsexyflanders4024]

What bolt pattern is that on the wheel mount? I can't find it online.

[@Ivan_f1fan]

wait you said it couldn't be attached with fanatec, but you did used a fanatec wheel base, so can you also put a fanatec wheel on it?

[@d3f4ult_q8]

👏🏻👏🏻👏🏻

[@chrischapman87]

Is it compatible with. Thrust Master Ferrari gaming wheel?

[@Ivan_f1fan]

is it for g923 too?

[@djhbkrosegold5112]

I have this exact one and I have a direct drive from Moza racing

[@shalty554]

I am looking to buy the r5 bundle. what do you have and is it solid or does it move a little?

[@potrebitel2008]

Can someone please post DIY solutions that eliminate the wobble of the Vevor Wheel Stand? Thanks a lot.

[@drummer4hire12]

I am going to bolt 2 pieces of angle iron on the side bars of the wheel holder and connect them to the bottom rail........This might stiffen the rig up a bit.

[@JulianoFagundes]

Is it easily foldable with the wheel, or do I need to disassemble any screws or take off the wheel?

[@zocker1990]

Look at 2:29 . You can fold it with the wheel attached but it won’t become as small as without a wheel.

[@TruckersMP_ETS2]

Man hört das du deutsch bist 😂💪👍

[@zocker1990]

😎

[@WeAllOof123]

Do I need to put the shifter part there because I don’t have a shifter

[@WeAllOof123]

?😅

[@zocker1990]

No, it’s an extra piece so if you don’t want it just don’t attach it. 👌

[@WeAllOof123]

@@zocker1990 ok thanks

[@chrisbue3382]

hast du ne ahnung ob auch ein Trustmaster T248 drauf passt ?^^

[@zocker1990]

Sollte klappen, auf den ersten Blick sind die Löcher zum befestigen gleich wie bei den anderen Thrustmaster Modellen. Zur Not muss die Bohrmaschine ran. 😅

[@chrisbue3382]

@@zocker1990 die selbe Firma hat noch ein bissl stabileres wo das t248 direkt angegeben ist. Hab das mal bestellt^^ danke dir

[@jnyc96]

im about to order it for $70 :)

[@rlanesports]

Did you order it? I got one from Ebay for $54 Free shipping

[@Lunify_ELP]

I seem to be noticing that you have a german accent

[@Sal214OC]

I got the worst instructions with mine.

[@caelanhawk4062]

Im so ready to get rid of this

[@freekson7559]

DON'T BUY THIS. I bought this stand because of this review and after a few minutes of use I regret it. The stand is ultra unstable and unusable. I bought a t300 rs and unfortunately it flies left and right and tilts all the way forward (on the driver). Reviews on the website are manipulated. After leaving a negative review, it did not appear on the website.

[@zocker1990]

Hi, like I said in the review you get what you pay for. I guess you need a stronger rig in a different price range.

[@cheapbstard]

yeah the t300 is way to strong for this lil stand. this is more for those entry level like the G920 or the T150.

[@moheezali2222]

​@cheapbstard hi, I am also cheap bastert will this be OK for g923?

[@tgreg9542]

@@cheapbstardfacts he needs the omega Gt 😂😂

[@scottd7222]

You can by two reinforcement bars that go vertical from bottom of stand up to arms. Night and day and highly recommend. It's actually sturdy with them.