Best DIY Blowpipe and Darts - Youtube demonetized this video. Why?

The day after this video was demonetized video views dropped from an average of 300+ views per day to 25 v. p. day!
Thanks for watching my videos.
- Best home made / Blowpipe i ever made!
Darts made from barbecue skewers, nails, with and without broadheads.
This is the modern way of using common materials to do something that was invented thousands of years ago.
Also see how to convert a drill press machine into a wood lathe,
and finally see amazing footage of fruit and vegetables!
Share this video: • Happy New Year to all ...
Subscribe to my channel:
kzbin.info_c...
Visit my channel:
/ mrmyvids4you

[@ritvikkapoor4545]

A very good video indeed! Just too good and real that even youtube got intimidated by it. I wish they had not demonetized the video, but there is something known as CSR activities which are mandatory for companies image hence they took these better actions. My condolences are with you friend. Perhaps it might be the sheer number of darts which led to the youtube believe this video can felicitate mass production of a deadly weapon's ammunition.

[@MrMyvids4you]

Hello Ritvik Kapoor, this demonetization thing is far more complex then one can ever imagine , and I do agree that some videos are totally inappropriate and should be banned. I been posting videos on youtube for some time now, and for some time I didn't even know that it was possible to receive money from it, today the little money that I receive in average fifty cents per day is not the reason I make and post these videos. The sad thing about it all, is that youtube does not tell me the reason it demonetizes my videos, it just says that it does not conform to the community guide lines. Just two weeks ago I got another video demonetized, this is the link kzbin.info?o=U&video_id=2WHIJE0xmKA and again no specific reason, or what part of the video does not conform to to the guidelines, and I can´t even contact any one from youtube do dispute their decision, and on top of all that the video is automatically berried in a way that it's almost impossible to find it, unless the exactly title is use on the search bar. This blowgun video before been demonetized was viewed in average 320 times per day, now gets 16 views per day. Thanks for your concern and support, and for watching my videos.

[@idkwhatthisisforplzhelp3678]

MrMyvids4you why make them so complicated? I sharpened a 4 cm nail, put some paper on it, used a 1.5 meter pvc tube and it punched a hole thru a 1 inch board

[@crucifyrobinhood]

When I was about 15 in the eighties I made a 3/4" pvc tube and nail type dart affair that easily put holes through the standard 1/2" to 3/4" plywood garage door of the era. It took a lot of experimenting to get there. Materials you choose for tube and dart really don't matter. Bore diameter, dart weight and friction need to be balanced with lung power and bore length. I started with about a 6' pvc tube and pretty uniform darts from sharpened 16d finish nails with soda can aluminum cones. I shot groups of 3 and slowly cut the tube length until I found the sweet spot where my lung power ended and the energy sapping friction of skirt on barrel took over. At full length it seemed to take a full second for the dart to finally leave the muzzle and when it did it just sort of blooped out toward the target. I was holding over a bunch to hit a 3" target at 10 yards and the dart often bounced off the plywood. By the time I was done the blowgun was about 47" long, there was a light "pop" as the dart left the tube and an instant resounding WHAKK!!! as the dart buried itself to the cone in 1/2" plywood. So there you have it. There are no rules of thumb that I know of but I'm sure a mathematician could sink his/her teeth into this one. Just getting the balance of force vs friction right. Once you have a powerful, consistent, snapping delivery your accuracy will get to the "holy shit dude did you get that with your camera" level. Make plenty of spare cones because you will robin hood the shit out of your darts, guaranteed. Happy hunting gents and maidents.

[@MrMyvids4you]

Hello C.RobinHood, Thanks a lot for this informative and well structured comment, if i ever make another blowpipe I´ll definitely use your advise. Thanks for watching my videos.

[@crucifyrobinhood]

My pleasure @@MrMyvids4you

[@jameschanner4]

Excellent stuff, this man is a teacher, a real craftsman. If you find these videos boring its only because you don't have the skills to do it yourself!!! Time to learn. A real pleasure.

[@MrMyvids4you]

Hello James Channer. Thank you very much for kind words!

[@Captaincracker826]

James Channer best comment. glad to see there are still a few of us who are humble thankful and eager to learn new things

[@ionutfelicitari9328]

too bad i dont have a drill press

[@hope4ourfallen]

Love seeing the outside the box thinking for the mini hacksaw and drill press lathe..So cool to see how ya pulled it all off with the things you modified❤

[@camerondoesthings2261]

Why are people saying that this video is such bad quality? Its not about the quality, its about the content! Great video by the way!

[@MrMyvids4you]

Hello Cameron, thanks for the support and for whatching my videos! I visited your channel, in the description video box you should write a "full video description", that is very important because search engines direct traffic base on what is on the videos descriptions.

[@__babyface]

MrMyvids4you is this the same kind of darts they used in the film Jungle 2 Jungle?

[@MrJerseyMicah]

after a while I finally made a blowgun just like yours following your steps. I used it in the backyard and shot the fruits and vegetables. Now I'm off to use it at the food court at the mall!

[@MrMyvids4you]

Hello Michael Rooney, Don`t forget to take the video camera with you and after posting the video, showing you explaining what you`re doing to the security guards! Thanks for the comment and for watching my videos!

[@MrJerseyMicah]

LoL...no seriously thank you for posting the video. I wanted to tell you that little tin split shots really help those darts fly through the wind. Me neighbor saw me out in the backyard shooting cans and really got a kick out of it.

[@suoppsdn9751]

Great video. I love how you went in detail on each part of the blowgun. Love it. Thanks for sharing

[@MrMyvids4you]

+Steve Rabon Hello Steve Rabon, I like to make videos with as much info as possibly and possibly inspire and motivate others to start making things! Thanks for the comment and for watching my videos!

[@davidcrabtree5698]

U-tube is afraid people will now be able to make a true weapon. Very easy instructions! Good video!

[@njoysuccessnow]

I love seeing how systematic and calculated your work is. It's a pleasure to watch.

[@MrMyvids4you]

Hello Chad D, thanks for comment and for appreciating my work.

[@MinnesotaRCbros]

This guy is like super serious about this stuff

[@MrMyvids4you]

+MinnesotaRCbros2015 Hello MinnesotaRCbros2015, No i´m not! Thanks for the comment and for watching my videos!

[@stephen3073]

Totally fascinating. For anyone who has ever tried to make an actual, tangible, useful object- we really get a kick out of how ingenious you are as an on-the-spot inventor. Like the way you made the saw for cutting the tip slot. Yeah! That's why this is so fun. It's the continual opportunities for discovering new ways to do things with ancient tools!

[@RexRenart]

I saw this video 6 years ago and i was the time try this method to make blowgun darts and it works very well. For making broadheads I use cutter blade parts. It's deadly effective for hunting.

[@caduceus33]

Thanks for the video. I'm glad you didn't waste the fruit and veggies, but I hope your darts were clean!

[@kaylamarie8309]

I never get tired of your videos. I hope you are well and happy and maybe will be inspired to make some more videos! 🙂👍.

[@Psychonauticus6]

This was absolutely amazing! You sir, are a true craftsman ^_^ It was very refreshing to see someone put serious time, effort and love into their project. Really inspiring, gotta try this myself now.

[@MrMyvids4you]

Hello Psychonauticus6, Thanks for recognizing the time and effort that takes to make a video like this one. Thanks for watching my videos, and good luck on your projects!

[@jonathankoehn7186]

Very very good! Enjoyed the video! I started making bliw guns there a pile of fun. Now my young children are making them also! I make them make there own darts. Its a very good learning experience for them. learning about fins, breathing ect! I make mine out of 1/2 " hydraulic tubing. It make premium blow guns! Hey thanks again for the great videos and courage to you and yours!!!

[@MrMyvids4you]

Hello Jonathan Koehn, It really makes me happy to know that my videos are inspiring and motivating others to start making their own projects and getting children involved is the best that a parent can do for them. Make some targets using rubber balloons with a bit of wheat flour inside, kids will love it. Thanks for the comment and for watching my videos!

[@PioneerGuy581]

I love the Delta -Vise conversion... Good one..

[@MrMyvids4you]

Hello Will North,Thanks for watching my videos and for the comment!

[@Yosefschannel]

The design the effort just incredible

[@MickyMoz]

Great work.I have made a few myself.My best one i uses a 5ft length of stainless steel gas pipe and clad it with wood drilled out in sections on a wood lathe and glued on with epoxy.I use bicycle spokes for darts about 2-4 inches with a variety of flights.Best flights are ones of wood i find but are a PITA to turn and get damaged easily by other darts if used for practice.

[@benlee8618]

Hi Micky , what was the bore diameter on your pipe ? Thanks. 😊

[@robertm4050]

That lathe idea is so F-ing AWESOME!!!!!!!!!!!

[@MrMyvids4you]

Hello Robert M, in my country we have a saying that goes something like this: if you don´t have a dog to hunt use a cat, isn`t the same but it gets the job done.

[@robertm4050]

Well, however you want to say it. I am going to make one of those with a cheap used one off the internet.

[@pierre5325]

Greetings from New Mexico (US) Dear MrMydids4 you, this vid was truly facinating. Thanks for making it. perre

[@MrMyvids4you]

Hello pierre5325, you´re very welcome, thanks for the comment and for watching my videos!

[@oliverwestwood5420]

this video deserves way more love than it gets

[@MrMyvids4you]

Hello oliver westwood, thanks for the support and for watching my videos!

[@TheGaginator]

That is a great video! Something about shooting the soft fruit is very satisfying... Haha.

[@MrMyvids4you]

+Gage Clements Hello Gage Clements, yes you´re right, and at the end you can eat the targets too, that´s recycling! Thanks for the comment and for watching my videos!

[@keatonyt8580]

cheers for the great tips i love using blowpipes for (hunting,fishing,ect) n i think im going to ad the mouthpiece aluminium pipe n iwill start making videos n i will include this in it

[@MrMyvids4you]

Hello uk vapors, good luck on your future video projects. thanks for the comment and for watching my videos!

[@nicknorman9464]

You are awesome at making blowguns I own 3 of the big bore blow guns but they look nothing as cool as these great job

[@MrMyvids4you]

Hello Nick Norman, Thanks for the comment and for watching my videos!

[@kellyroup2972]

Very nice vid. Gonna have to try that. Thank you.

[@MrMyvids4you]

Hello Kelly Roup, yes go for it, blowguns are really simple to make and fun to use. Thanks for the comment and for watching my videos.

[@BillRoyMcBill]

Great work, thanks for showing this video.

[@MrMyvids4you]

Hello Bill, Thaks for watching my videos, and for the comment!

[@artemis12061966]

that looks so fun, beautiful work.

[@MrMyvids4you]

+artemis12061966 Hello artemis12061966, yes you´re absolutely right, you should try it sometime! thanks for the comment and for watching!

[@Spiritof48]

Very nice work . I made one out of 6 ft of copper pipe , shot trough 10mm furniture grade plywood with homemade steel dart .

[@MrMyvids4you]

Hello Rasmus Lykke for such a simple design blowguns are very efficient devices. Thanks for watching!

[@karrsonreed5804]

Good vid but I suggest using g congruent pipe for the pipe and you can just spray paint it or wrap it with duck tape and use a smaller pipe that's why your darts were dropi g in flight

[@MrMyvids4you]

Karrson Reed, Thanks for the suggestios, and for watching my videos!

[@saikrithiks2870]

2018 and still watching... Great video and guide about the mouth piece... I made 1 with pvc as i had it readily available... 👏👌

[@MrMyvids4you]

Hello Sai Krithik, glad that you find it useful. I never imagined that this video with such poor image quality would became so popular. Thanks for the comment and for watching.

[@callonthenameYAHU]

We call that "Kentucky windage" when you compensated left aim to hit target in blowing wind. Nice craftmanship. Blessings

[@MrMyvids4you]

Hello Callonthename YHWH, i like that termenology! the day i shot this video the wind was a big player too! I really had to use a lot of "Kentucky windage", thanks for the info and for watching my video!

[@astrazenica7783]

cool idea for the lathe

[@MrMyvids4you]

Hello Adam Smith, it´s not as good as a real lathe but it works, and now i have mounted a "x,y cross slide table" on it and works as "drill press/milling machine" Thanks for the comment and for watching my videos!

[@shaheenkhan9132]

Yesssssss I did it it's simply amazing man thanks so much buddy but it is really tough to do it

[@MrMyvids4you]

Hello Shaheen Babu, yes it takes a little work, the greatest satisfaction is to have something that will last for a long time and saying: I made it my self! Thanks for the comment and for watching my videos!

[@sollyharr]

You are an artist well done!

[@MrMyvids4you]

+chris pollard Hello chris pollard, thanks for the compliment, and for watching my videos!

[@papaya1955]

Well done !

[@adamfirst3772]

very well done... great job.. thanks for sharing

[@MrMyvids4you]

Hello, Adam First, glad that I can help. Thanks for the comment for watching my videos.

[@ronfinigan134]

very impressive darts brother!

[@MrMyvids4you]

Hello Ron Finigan, Thanks for the appreciation, and for watching my videos!

[@worldoftanks3743]

Amazing formation of the mouth piece, nice job!

[@MrMyvids4you]

Hello WordOfTanks, Thanks for watching my videos!

[@mechanical1955]

Neat I like it , Well done

[@MrMyvids4you]

Hello alan manning, i visited your channel, amazing work you do. Thanks for the comment and for watching my videos!

[@pablobasstb]

great craftsmanship!! and i like how you took care for a perfect finish on the gun and darts. Perhaps do you think a smaller bore pipe would give you some more power/distance/accuracy? cheers!

[@riverrat2993]

i use locust thorns on the tips of my bamboo darts. work great. stick in wood real good too.

[@MrMyvids4you]

Hello River rat i just searched on the net for locust thorns, and yes, that can definitely make good darts. Thanks for the comment and for watching.

[@PonziZombieKiller]

nice work

[@brothersinthewoods170]

This is neat gotta make one some time

[@MrMyvids4you]

brothers in the woods Hello Brothers in the woods,yes do it, is a great satisfaction doing and using something that you can say: I made it!thanks for watching!

[@Hans-cp2eb]

Thank you Sir, for sharing your Video. Great craftmanship, very useful Information and humoristic comments too.I really enjoyed it and I have also made some wooden Darts with paper cones. They work awesome.Best regards from Austria!

[@MrMyvids4you]

+Hans N. Hello Hans N. You´re welcome, it´s always a pleasure reading comments like your´s. Thanks for finding my videos useful and for participating in this channel too! All the best from Portugal

[@SitNSpinRecords]

My fav DIY darts. Take a copper welding rod and hammer it flat on the end. Nip it into a broad head shape and cut it to the steel broad head length. All you need is the copper welding rods, a hammer and heavy duty nips. (It will take both hands to nip) I use either a paper cone on the end or the orange plastic cones or wire nuts. They hit hard enough to penetrate the big outside plastic trash cans the city gives you. I can usually get about a 3" group at 35 feet.

[@MrMyvids4you]

Hello Siris Mc. Thanks for the suggestion and for watching my videos.

[@huntercastle9949]

Awesome darts

[@MrMyvids4you]

Hello Shaun Castle, Glad that you like it. Thanks for the comment and for watching.

[@acehighjohn1759]

Hi, enjoyed ur video and i have a question. How do i judge the length of blowpipe i should use and how what is teh best arrow to blowpipe length ratio if there is 1. Any advice at all would be welcome. ty

[@kenteal1836]

more blowgun shooting videos please!!!! best accuracy ive seen yet

[@MrMyvids4you]

+Ken Teal Hello Ken Teal, No time for more videos any time soon, I gotta work to pay the bills! Thanks for the comment and for watching my videos!

[@colinthiel3447]

For the bamboo darts (without broad head) you can put the tip in fire until slightly black, this makes the tip harder and stay sharp for longer.

[@MrMyvids4you]

Hello colin Thiel, I gotta that. Thanks for the idea and for watching my videos.

[@erblinduriqi9180]

Well done i love this video so much

[@MrMyvids4you]

Hello Erblin Duriqi, Thanks for the comment and for watching my videos!

[@kennywilkes6978]

Well done sir

[@TheOneproudmeximan]

Wonderful video great description of materials and how to do very good job best blowgun vid out their

[@MrMyvids4you]

Hello Jovany Trejo, Thanks for the compliments and for watching my videos! Please don´t break any neighbors windows!

[@TheOneproudmeximan]

I'm gonna build a couple for christmas

[@MrMyvids4you]

Jovany Trejo Hello Jovany, yes, that will be a great christmas gift! thanks for watching my videos!

[@outbackenduro7418]

Hello, even though they demonetized you still have great content. Hope you decide to make more videos but I understand if you have better things to do. Thank you for what you've posted.

[@robertbrunston5406]

Awesome.

[@MrMyvids4you]

Hello Robert Brunston, Thanks for the comment and for watching my videos!

[@dedebelmas]

It's a nice blowgun video, thank you for make and share it

[@MrMyvids4you]

Hello dede hyung, thanks for watching my videos!

[@Imperio112]

wow!!! well done !

[@MrMyvids4you]

Hello imperio 112, thanks for the comment and for watching my videos!

[@WarthogObsession_]

I'm surely going to make this !! very very Nice

[@MrMyvids4you]

Hello Wimpie Jacobs, I´m glad that you liked it. Thanks for the comment and for watching my videos!

[@nodubman]

Wimpie Jacobs o

[@kaylamarie8309]

You Sir, are brilliant

[@MrMyvids4you]

+Kayla Marie Hello kayla Marie, Thanks for the compliment and for watching my videos!

[@kaylamarie8309]

+MrMyvids4you You are welcome, I really enjoy them :)

[@playatraumatize2025]

Nice your vids are awesome you just earned a sub!

[@MrMyvids4you]

Hello Legocruz, thanks for watching my videos and to subscribe to my channel!

[@PhoenixCustomPrimiti]

I applaud your ingenuity and use of equipment you had on hand. How long were your finished blowpipes?

[@MrMyvids4you]

+PhoenixCustomPrimiti Hello PhoenixCustomPrimiti, the longest blowpipe is six feet long and .680 in inside diameter, the other is five feet and .570 I.D. Thanks for watching my videos!

[@lol567345]

You are awesome !

[@MrMyvids4you]

+lol567345 Hello lol567345, thanks for the compliment, and for watching my videos!

[@MrMyvids4you]

No time to make more videos any time soon. Sorry!

[@MrMyvids4you]

Thanks

[@MrMyvids4you]

thank you

[@MrWolfHuntsman]

+MrMyvids4You,what did you use for the blow pipe?

[@WithOutDoors]

Hey man, nice ideas... Thanx for sharin' atb Rüdi

[@MrMyvids4you]

Hello Wood Worm, thanks for the comment and for watching my videos!

[@WithOutDoors]

It's my pleasure! :-)

[@greekveteran2715]

My advice for you, is that files cut only in a forward motion. If you do it back and forth, like using a saw, you dull the teeth of the file. Also, the darts seem too tight inside the tube,That, reduces their speed and accuracy. The blowgun's performance, is low in relation with the amount of work you put into the prodject. Tha being said, darts look cool!!

[@MrBrentles]

Subscribed.

[@merlynmo5037]

really nice work. So glad people still make these weapons comes from our ancestors.

[@MrMyvids4you]

Hello merlyn Mo, now a days is possible to use modern materials and end up with a modern version of something that was envented thousands of years ago! thanks for the comment and to watching my videos

[@lifesucks247]

Enjoyed the video and your resemblance to Fez.

[@MrMyvids4you]

Hello Tom, Thanks for watching my videos!

[@Flederratte]

Thanks for the video :) just made a blowgun and now i am trying different darts this video helped me a lot! But i have some questions: 1. why do you let the wood stick out at the back of the dart and not cut it off where it touches the paper? 2. why do you only put the glue to hold the paper to the stick in front of the paper and not inside?

[@MrMyvids4you]

Hello Bachschmerle13, this way is easier to load the dart in the tube by grabbing the end of the dart without touching the paper cone, and removing it from the tube if you decide not to shot. I do glue the inside of the paper cones, see video at 14:41 minutes! Thanks for the comment!

[@cooljay3038]

nice job on the mouth piece

[@MrMyvids4you]

Hello Cool jay, Thanks for the comment and for watching my videos!

[@maimunarahman6498]

you are a genius

[@MrMyvids4you]

+Maimuna Rahman Hello Maimuna Rahman, no i´m not! Thanks for the compliment and for watching my videos!

[@kellyroup2972]

I have made them from what we call tiger weed or wild dandelion stalks. They have a soft pith core and if you remove it while the stalk is green and then place the stalk where it will remain straight; [ between 4 boards with rubber bands or bunji cords wrapped to hold and tighten them with shrinkage] they will season and be very hard and work very well. You could easily make a mouth piece like one of yours to fit to these and probably use it many times on different stalks. I like thistledown fletched darts which the Cherokee indians were known for. Only because its all natural and easy to gather the materials because they are all seasonal.

[@kellyroup2972]

Guess i need to make a bid. with the Tiger weed. You can hollow them out with a wooden bit if necessary. I cheat and use a wood bit.

[@MrMyvids4you]

Hello Kelly Roup, Thanks for the comment and for watching my videos.

[@MrMyvids4you]

Hello Kelly Roup, thanks for sharing your knowledge on primitive North America blowgun making, it would be great if you could make and upload a video showing the gathering and processing of those natural materials into a blowgun. Thanks for the commenting and for watching my videos.

[@MaxBrainDevices]

Realy nice

[@MrMyvids4you]

+Max Brain Hello Max Brain, Thanks for the comment and for watching my videos!

[@Daninja42]

A lot of work, but great job !

[@EKonMaster]

wow that was good to watch thank you, and your a good shooter

[@MrMyvids4you]

Thanks for the support

[@EKonMaster]

I will try to make a blowgun today

[@MrMyvids4you]

EkonMaster Bud Let us know how it turns out

[@MrMyvids4you]

Thanks for the comment

[@aymanboughanem881]

aside from the actual blow gun the hacksaw idea is amazing

[@MrMyvids4you]

Hello Ayman Bou Ghanem, I´l glad that you liked it, it´s a simple idea but very useful. Thanks for the comment and for watching my videos!

[@MrMyvids4you]

These darts are so fast and deadly that no bacteria will survive!!! and the best way to be healthy is to be expose to a not so clean environment. Thank you for the comment

[@acehighjohn1759]

Hi, enjoyed ur video and i have a question. How do i judge the length of blowpipe i should use and what is teh best dart length to pipe length ratio if there is such a thing? Any advice would be very welcome. ty

[@josiahfleming7549]

Nice. I agree that we need to stay in school. You don't have a life without it. But you also don't have a life without a hobby!

[@MrMyvids4you]

Josiah Fleming Hello Josiah Fleming, you are absolutely right, having the opportunity to occupy some of our time creating useful things, is one of the most rewarding aspects of life. School is very importante, but keep your mind open and don´t assume just because is taught in school it is the truth!

[@georgeruiz1048]

Very nice

[@MrMyvids4you]

Hello George Ruiz, glad that you liked it. Thanks for the comment and for watching.

[@Crosbygold]

Very good video

[@MrMyvids4you]

Hello Braden Ferguson, thanks for the comment, and for watching my videos!

[@RexRenart]

Hi, what is the alloy of this plate ? And where is what you found ? And above all, is what it adds to the projectile ?

[@dylandewalt7727]

What size is your copper pipe what size dowel and where'd you get your earplugs I have half inch copper pipe and can't find big enough earplugs

[@JaimeHacks]

Hi great tutorial ! But how long in cm's is your pipe (or blowgun)?

[@MrMyvids4you]

+Jaime Hacks Hello Jaime Hacks, the blowgun with the mouthpiece was made from aluminium pipe 180cm long= 6 feet and 20mm outside diameter.the one without the mouthpiece was made from copper pipe 150cm aprx. 5feet and 15,8mm=5/8 outside diameter.Thanks for watching my videos!

[@johnechterhoff4791]

That was entertaining! Thanks!

[@MrMyvids4you]

Hello John, Thanks for watching!

[@nec12999]

How long did this really take you?

[@MrMyvids4you]

The broadheads are made from paper embedded in super glue. Thanks for the comment.

[@Lamont24012]

Maybe a Joywayus Brass 1/4" NPT Female Thread Push Button Check Valve Switch Shut-off Valve

[@cubanandy9905]

Genius

[@MrMyvids4you]

Hello Clorox Bleach, Good to know that you liked it. Thanks for the comment and for watching.

[@datsuna6585]

Very niceeee

[@MrMyvids4you]

Hello Fizz, I wish KZbin had the same opinion, because it demonetized this video. Thanks for the comment and for watching.

[@gavinfaync]

I have an idea for you to have an mouthpiece for the blowgun use a very large trumpet mouthpiece or baritone mouthpiece baritone has a much larger mouthpiece to achieve deeper sound so it will have more airflow. But it may be too big for you liking. Since their made to make a buzzing sound their is a small tube at the end of the cup on the mouthpiece so you would cut of some of the tube to increase airflow and I would drill a semi-large hole through the mouthpiece to make even more airflow since the mouthpiece are all metal and pretty heavy duty they'll probably last for life

[@MrMyvids4you]

Hello gavin, thanks for the idea, and for taking the time to watch my videos! Happy new year!

[@jacobturner6646]

That'd be hard to get a dart into, though.

[@Yosefschannel]

You can post a video comparing a real blowgun to your beast homemade blowgun

[@demoman5707]

Design of pipe and darts look good over all but you can hear the loss of power when you shoot. If you were to shrink the internal diameter you might get even better power results. Great design.

[@MrMyvids4you]

Hello Demolition Man, i have to make another blowgun using a smaller diameter pipe to compare it. Thanks for the comment and for watching!

[@MrMyvids4you]

Thanks for the comment

[@hadighorbani1746]

very very nice :)

[@MrMyvids4you]

+hadi ghorbani Hello hadi ghorbani, thanks for the comment and for watching my videos!

[@voolivreful]

exemplar seu trabalho

[@MrMyvids4you]

+voolivre arqueria Olá voolivre arqueria, muito obrigado, vi alguns dos seus videos, e gostei!

[@voolivreful]

se tiver alguma informação que eu puder ajudar fique avontade , muito obrigado

[@aymanboughanem881]

and u could use bicycle wheel wire for stronger tips (steel)

[@MrMyvids4you]

Hello Ayman Bou Ghanem, thanks for the tip. Thanks for the comment and for watching!

[@kasimrana142]

Naic good video