Best electric skateboard truck

[@d.driver9591]

Thank you for providing all the details on these trucks and breaking it all down. I am sure Mike and the team watch your video and will implement some of your reommemdations! Looking forward to your next video!

[@rickyeverett]

Thanks for the comment much appreciated 👍🏼 glad you enjoyed the video 😁

[@fujio001]

I agree. A design that allows for easier swapping of bushings makes life so much easier.

[@fujio001]

Here is an idea to make the trucks carvier. Have Mboards machine a new baseplate which allows for the use of tall bushings. Normal bushings are 0.6” and tall are 0.75”. It makes a pretty noticeable difference. If you want to go really nuts, you can use a longer kingpin and utilize tall bushings both roadside and boardside.

[@rickyeverett]

@@fujio001 nice I have managed to find a setup that's works great ATM good stability up to about 45 mph and very maneuverable 👌🏼 good Ideas there tho thanks 👍🏼

[@fujio001]

@@rickyeverett Please share your set-up. I am most likely going to be picking up an Interstellar this spring. Thanks!

[@shameernisa4165]

Great Video… 👍🏾 good to see you back 🙌🏾🙌🏾🙌🏾

[@rickyeverett]

Cheers much appreciated 👍🏼

[@erike7297]

Woooweee sick! I bought the new MBoards endurance 2.0 + with nexus trucks and waiting delivery on it next month. Thanks for the detailed review on these trucks.

[@rickyeverett]

That's a really good board using high quality parts I'm sure you will be over the moon with it 💪🏼

[@jpcarsmedia]

How long did it take to get your board? I ordered the endurance 2.0+ about a week ago.

[@erike7297]

@@jpcarsmedia Mine was from the first batch of boards. I ordered the first day they got released and it took a little under two months. I imagine yours should take much less than that.

[@just_golds]

I always ask the suppliers if they wouldn't mind just writing the value to less that $100's to keep my import fee's down.

[@rickyeverett]

Yes definitely will going forward 👍🏼 lesson learned 😂

[@MikeBeard]

Great Review! Just seeing this now somehow! Great feedback! Will definitely look into how we can solve the kingpin bushing swap issue. The adjustable arm makes everything a bit tricky but we’ll take a look at it for sure! 4 small spacers are SUPPOSED TO come with the 4wd version. Sounds like we goofed on our 1st 4wd version order and didn’t think about spacers. I’ll have my guys make dedicated 4wd and 2wd hardware bags moving forward! Glad you’re loving them!

[@rickyeverett]

Cheers Mike much appreciated 👍🏼 Amazing trucks loving them look forward to whatever you have going forwards keep up the awesome work 👌🏼

[@jpaulglobal]

I'm less carving and more high speed stability. Whats the highest speed these trucks can handle when adjusted for high speeds? Thanks@!

[@rickyeverett]

I've been 50mph on them so far and all I did was change the bushings and adjust the back truck angle so extremely stable trucks

[@Patontheback914]

Nice!! Finally seeing more reviews on these trucks. Definitely the best ESK8 trucks for me. They make 30mph feel like 20mph!! Im changing all my decks to these eventually. Nice review broski

[@snowhiter]

Glad to see you off DKP's. Nice one Ricky !

[@rickyeverett]

Cheers dude I still like dkp's tho 🤣 👍🏼

[@HockeyTutorialOfficial]

Good to see this beautiful b&%$&%d back

[@MichaelWagner-z4k]

How wide is the deck you are using those trucks on?

[@destinshimmel283]

I am struggling to remove the axels on mine. Any tips beyond heating the trucks?

[@KmanRuffian]

I would try them out in the lowest angle also. I found they carve deeper at the low angles because there is more lean in the board for the same amount of turn. I found the minimum turning radius to ultimately be about the same in the different angle settings. The thing that seems to change is the amount of lean the board has. Lower angle equates to more lean to turn = deeper carves. I bet you could run the lower angles and softer bushings and you'd like the feel of that more. That was my experience anyway. I'm coming from DKP also. Worth a try anyway.

[@rickyeverett]

Tried that to start with as it was my first time using theses sort of trucks I thought that was the most manoeuverable setting as they leaned more but after messing about changing bushings ect found they definitely turn a lot shaper at the higher angle and you need the right bushing setup that critical

[@KmanRuffian]

@@rickyeverett good to know! I'll try some cones and try the higher angles again! You mentioned in your other reply that you've gone even softer. What's your current bushing setup?

[@rickyeverett]

So I have on the front truck white chubby cone on the front board side and a white standard cone on roadside For the back truck I have the green chubby barrel board side and a green standard cone on the roadside this is very maneuverable but stable at higher speeds I'm about 140/150lbs rider

[@rickyeverett]

Krank formula

[@KmanRuffian]

@@rickyeverett thanks for the info! Will give it a go!

[@Esk8Nomad]

Cool video bro

[@rickyeverett]

Cheers dude been watching all your videos lately you have been smashing out the content 👌🏼

[@Esk8Nomad]

@@rickyeverett dude that means everything maybe we meet up for a collaboration

[@rickyeverett]

@@Esk8Nomad no worries dude yes I would be down for doing meeting up and doing something 👍🏼

[@KmanRuffian]

Are you running regular cones or fat cones?

[@rickyeverett]

Was using regular cones then have now switched back to a different setup with softer bushings rides like a dream now for my weight just takes abit of getting used to coming from dkp

[@alfonsoaiello1]

Hi I wanted to know if these trucks are compatible with the evolve Hadean Bamboo?

[@rickyeverett]

Hi yes will work with basically any electric skateboard

[@NitroSoldier]

good job no helmet this will be the last video i watch from this channel unsubbed

[@BN99239]

Lol?