Best Engine Bay Dressing for Detailing👉 Koch-Chemie Motorplast- Restore & Protect!

[@attention2detailswchelsea]

Dont forget to use code "Chelsea10" for 10% off at Car Supplies Warehouse

[@agage10]

Unfortunately, your code isn't working for the Motorplast. :(

[@1stfrompuertorico568]

Motorplast my favorite for engine bay and smells fantastic. Thanks madame Chelsea for your videos

[@attention2detailswchelsea]

Thanks for the recommendation!! 🥰

[@1stfrompuertorico568]

@@attention2detailswchelsea you are very welcome and thank you because of your everyday recommendations and reviews so we all can learn from your experiences.💐👍

[@windhaming]

Thanks for this, I bought a bottle based on your video and just treated my wife's 15 year old Volvo. The engine bay looks absolutely better than new. Super easy and effective.

[@aldaley3537]

The b4 photo looked like a barnfind! Incredible final results. Applied the Motorplast on my garaged Infinity over a year ago. Still looks as if it was done yesterday.

[@jerryhoschouer5131]

Great job! Looks like it’s brand new. Your amazing and I wish I lived closer because you would have a new customer.

[@mikesloper7112]

Thanks for the heads-up Chelsea, MP will be in my next restock.

[@VeganRod]

Thank you for the dark fury suggestion. I’ve been a detailing hobbyist for decades and never knew about this product. It did a great job of cleaning the engine and the door jams. Wahoo. I’ve ordered Motorplast. I can’t wait until it gets here.

[@splendidsplinter739]

Looks amazing! Thanks for sharing Chelsea!

[@CHEFDAD5]

Best product ever for engine clean been using this since it came out amazing product

[@Pittsburgh-412]

Wow that looks amazing. It really did a great job

[@404notfound.....]

Just the product I've been looking for after the winter good timing, thank you Chelsea.👍🇨🇦

[@joeydrisdale3224]

Great review! I just laid down a layer of Motorplast yesterday! I love how it looks right now. This juice is amazing!

[@randalmorris2076]

Amazing results! I have never found a product that I liked on engines. I will be trying that.

[@bigsmith7349]

Dam that went from looking like it came out the junkyard to right off the showroom floor 👍👍❤❤

[@barrybij8079]

I never thought about protecting the paint under the hood... always pick something up

[@marklittleton1309]

Wow, great results, Chelsea! Thanks for the Motorplast recommendation - will definitely be picking some of this up. I've never actually cleaned an engine bay - have always been afraid of introducing too much water. When I finally do, MP will definitely be my go-to dressing. 👍

[@paulrogers3511]

Great video! Fantastic product

[@cynthiaenglish2736]

Great tip! I’m fast becoming a KCX fan girl. Can’t wait to hear about your training @ Chicago Auto Pros!

[@60trickpa]

WOW what a difference thanks for sharing these products

[@jritechnology]

I'm going to try this for the first time this week. I've been using back to black, and meguairs products and was never 100% happy with it. I've heard good things about the motorplast (and I use KC polishes religiously) so I am quite sure I won't be disappointed.

[@attention2detailswchelsea]

A little goes a long way. If you have streaking you’re using too much

[@BSR496]

Looks great! Nice job!

[@altillman1448]

For engine bays we use Dark Fury 5:1 in our Marolex foaming pump sprayer with a boars hair brush to clean and Aqua Gloss 4:1 air sprayed from our small Harbor Freight Detailer Gun to dress. These products offer multi purpose & surface use which makes them more cost effective for detail businesses.

[@JadeaRS4]

Not as good. If you want great results use for specific use. Not general use items. Been there done that.

[@23dothedew]

I used MP for the first time about a month ago and I got great results. It’s so easy to use. I wasn’t sure though if it is safe to get on painted surfaces in the engine or not. What do you think? Amazing before and after here!

[@thinkforyourself5672]

Best engine dressing ever

[@mills2424]

Looks good. I still like Meguiar’s Hyper Dressing more. No need to even use a towel after applying it.

[@sandmangti7040]

Great stuff. Best I have used. Not greasy to collect dust and dirt.

[@ian300whp]

Love motor plast! Easy to use and lasts a long time

[@jameshutchins3396]

Beautiful results! Well done mom

[@Ludo_A]

Ah, my favourite too. I also use it on the plastic of the wheel arches. Have you already tried Koch Chemie PS or PSS? Also very useable as a tire dressing.

[@attention2detailswchelsea]

Great idea for wheel wells!

[@cynthiaenglish2736]

Nice idea. Thanks for sharing Ludo.

[@p8rdm]

I’m sold looks a great product, is ok on the engine metal parts 👍

[@JZ_Cars]

Totally agree, MP is LE Git!!!

[@ddautodetailing]

Looks fantastic 👏!

[@randyrockwell6136]

I have been using MP on my vehicles and love the look and longevity of this product 🤠. Great video Chelsea 👍

[@daney1438]

Really enjoy your channel

[@MonicaTorresphilly]

That came out great.. I was looking for a dedicated EB protectant .. I will be giving this a try

[@mikaeljonsson4686]

Awesome job!

[@The_Detailing_Mafia_Sagar]

Nice work 👍

[@hurstdetailingllc]

Way to rock chick. Love your work from a brother to sister in detailing KEEP UP THE GOOD WORK. hope to see you on my channel

[@tug_r]

For those that have used both, is this any better than CarPro Perl?

[@kevinmurphy9982]

Great video!...hitting up Amazon right now...

[@attention2detailswchelsea]

I have a 10% off code on CSW if you want a coupon - CHELSEA10

[@kimnewling5728]

I've never heard of that stuff. Looks pretty cool. Questions: first of all I'm not that bright, but do you do the engine compartment first, then do glass? I get crude on my windshield and have to reclean. And, when you engine clean, do you have to clean cement under car after your done? I've noticed my driveway getting icky from cars. I'd like to try that product. Neat video. Thank you.

[@1stfrompuertorico568]

Yes kim, whenever you clean an engine bay it is advisable to do certain things like cleaning the driveway or cement where you had the car because of the dirt, oil, grime you are removing from the engine and you don't want that sitting on your cement, I normally use an APC or degreaser just to then wash over the cement. The other thing when you clean the engine is that you must wash the windshield, remember that the dirt from the engine is being blast with either a pressure washer or a hose and that spills out to the windshield and also to the paint on the front fenders. One way to avoid it or quick cleaning them is use ONR to lift that dirt and then blast them with the hose or pressure washer, then use ONR again with microfiber towel to get that dirt off safely or with the black sponge. Also, another alternative is using old drying towels on the windshield or those plastic shower curtains over the windshield, so the dirt being blasted from the engine doesn't stick to the windshield and is contained by the plastic shower curtain. Hope that makes sense.😄👍

[@kimnewling5728]

@@1stfrompuertorico568 yes that's all helpful. One thing I've noticed was when I walk my dog, all the junk that came off my driveway goes into the curb and gutter and eventually goes down the storm sewer. Is that OK? Just don't want people harassing me about cleaning cars.

[@ankymaldonado1418]

What do you recommend to remove road salt stains on carpets

[@attention2detailswchelsea]

White vinegar, steam and a stiff brush then hot water extract

[@precisionph5479]

Hi Chelsea, Could you elaborate on the rinse-less wash after the dark fury. What does that do and did you just spray it on and rinse or use it w/ microfiber? Love the channel btw 🙂

[@attention2detailswchelsea]

I spray with dark fury and mostly then just pressure wash off or at maximum agitate surfaces with a wheel brush then rinse, blow off excess water and then mist with Motorplast

[@MikesAutoDetailing]

Great job

[@robertstarner8083]

Awesome Chelsea!! I am taking delivery of a 2024 C8 Corvette next week. The car should be clean coming from GM to the dealer and then to me. What procedure and materials do you suggest I use on a brand new engine for protection??!! Thanx again for a GREAT VIDEO…..Dr Bob from Kennett Square PA!!!

[@attention2detailswchelsea]

If it’s brand new you might be able to get by with just a rinseless wash or a quick wipe down and then use this to dress and protect but it may not even need that for a while.

[@kitjeep]

Do you need to give the engine A good cleaning before applying. Mine is just really basically dusty

[@attention2detailswchelsea]

Yes clean first and then rinse with water. Blow off free standing water, spray this on and let air dry

[@oldretrogamer78]

Nice!

[@declanosbourne62]

Hey , nice looking. What cleaner did you use to clean it first.?

[@attention2detailswchelsea]

Superior Products Dark fury 5:1

[@declanosbourne62]

Thanks Chelsea.

[@nicksdragon6929]

Great 👍 video. For the Dark Fury, what dilution did you use? Thank you ☺️

[@attention2detailswchelsea]

A about 5:1 dilution ratio

[@nicksdragon6929]

@@attention2detailswchelsea I bought both the dark Fury and the Koch Chemie MP and I am so impressed! They have just replaced everything I have used in the past. I just ordered 5 gallons of the dark Fury but the Koch Chemie I can't believe it, all they sell is at 16 oz bottle, that's worthless. I wish they would sell it by the gallon or 5 gallons. Every single recommendation you've ever given I have tried and have always gotten fantastic results. Keep up the great work Girl!

[@tomlanko2547]

What dilution ratio did you use on the dark fury?

[@attention2detailswchelsea]

5:1

[@brandonnguyen1486]

What dark furry ratio did you use?

[@attention2detailswchelsea]

@@brandonnguyen1486 5:1

[@Gbeard94]

How well does this do in dry, dusty conditions?

[@attention2detailswchelsea]

It should be cleaned first

[@Gbeard94]

@@attention2detailswchelsea for sure, but. once cleaned and dress does it repel dirt pretty. well or do you have any experience with that scenario?

[@jacklawer6389]

Nice, how long does it last?

[@attention2detailswchelsea]

3-4 months minimum

[@rohannlacost4371]

Hi, Chelsea I have questions regards to business insurance, did you let them know that you have business?

[@attention2detailswchelsea]

If they ask, yes but its not something I always tell. When they seem hesitant that I have a home based business I assure them I'm fully insured and that normally reassures them

[@taozhen9750]

how to clean battery?

[@attention2detailswchelsea]

Often times all it needs is hit it with a degreaser and pressure wash FROM A DISTANCE and very quickly and then blow dry. If it’s crusty you may need a brush but always avoid excess moisture if it can be avoided on electrical components. On older vehicles or older batteries or connections that look work though that approach may be too aggressive so use common sense and let the technique match the situation

[@2889Daniël]

Hi, are those products available in Europe?

[@attention2detailswchelsea]

Yea they are a German company so should be

[@2889Daniël]

@@attention2detailswchelsea thanks

[@billtaglia2865]

Geez, who would think letting leaves stay accumulated under the hood would be a good thing to do. And on a BMW.

[@sofuknossum1]

M stripes on the grill and a neglected engine bay haha. I bet there was at least one gasket leaking.

[@v8soarer1991]

Sort of off subject. Also, people don't realise how strong of a cleaner just straight car wash dabbed on a sponge is.

[@bikegeist]

UnbeLEAFable transformation on that engine bay. 😀😔

[@1stfrompuertorico568]

1st

[@ChrisNLger]

It's Koch not coach Chemie.