Best Frames for Skating Flat

[@rxlifter4016]

Here after an absolutely horrific experience trying to set up the fluid 5's. Couldn't even get the hardware into the frames, never mind the wheels...!! Gonna send them back and give the FLT4s a go, thanks for the recommendations! This is exactly the video I needed 🙏

[@mr.rodriguez5099]

I don't skate flat but I really enjoyed watching your skating

[@wheelsceneblading]

@@mr.rodriguez5099 cheers!

[@chalkknees1754]

was thinking the same. some great tricks 🙌

[@chinobean3555]

@@mr.rodriguez5099 you'll cross over one day..... just wait.....

[@chinobean3555]

@@wheelsceneblading hey its paul Rodríguez

[@Jordan.Skates]

Think the Tnec plastic piece keeps the proper frame separation while curing to allow for easier wheel install

[@Edelmfcrvijr242swd]

I LOVE THE TNEC!!

[@totallyrobot]

Entente picked a hell of a time to have their shop down for maintenance. Woops

[@thecount5559]

The Entente hardware is so good. Just that small detail makes it worth it. Compared to fluid 5 hardware being off center and pressed along with how hard they were to setup I would gladly pay the money.

[@Joey_Vicario]

Finding them is the real issue. I would also gladly pay.

[@FDonkey]

Love the video ! More of it ! I personally love the Fluid Vs and the stock RB Blanks frames (which need a little handywork on a concrete edge, and I know you hate them) for flat. Aaaand the Kaltik V2s ! Did you forget them or not worth mentioning? Thx for the video 👍🏻 P.S. oh now I’ve read it forget the kaltik part 🤪😬

[@mkmkmk___]

Thanks for the shoutout ❤

[@wojtekkowalski8983]

I have the fluid V and it's hard to get the middle wheels in that's true. But I don't mind it that much. I love setting up my skates, sometimes when the weather isn't good I get my skates and tinker on them a bit, clean them etc just to interact with them lol

[@wheelsceneblading]

@@wojtekkowalski8983 if someone could just do that for me, I’d swear a lot less.

[@ragentnz]

The Diridari frame is amazing. I love how easy they are to set up, the hardware being superior to any thing else and how there is no rattling noise from any part of the frame. I have the large frame on a medium Them skate and i did initially feel they were too long, but i have gotten used to the length i do think if they made the made a 268mm frame it would be perfect.

[@wheelsceneblading]

@@ragentnz that was the exact setup I had and it converted me to skating flat.

[@wheelsceneblading]

@@ragentnz I am now riding the new medium length and it feels even better

[@ragentnz]

@@wheelsceneblading Im guessing they are sold out now lol. If they do another run I will get some, they are that good! Better spend the wife's money on a good purchase rather than something for the house 😁

[@jasoncalva]

Having skated all of these except the Entente frames, I agree with all your findings. Which makes me very curious how you will like the new FR/Oysi frames which have quickly become my favorite frames I've ever skated for flat.

[@wheelsceneblading]

@@jasoncalva #soon

[@insanogeddon]

Whittle a wooden wedge or two, hammer them in, make installs easy

[@wheelsceneblading]

I'm not sure what you are referring to

[@chinobean3555]

skating flat has been gme changer. im lovin the medium oysis id like to try the fr oysi and ententre look soo nice too

[@wheelsceneblading]

@@chinobean3555 FR ones are probably my next purchase

[@chinobean3555]

@@wheelsceneblading fr x oysi for life dawg lol

[@BunionBlader-pd7yy]

Any experience with the Kizer unlimited frames? That frames flat option looks intriguing. Thanks for the information and entertainment.

[@wheelsceneblading]

@@BunionBlader-pd7yy nope, never tried them

[@Nickolearr]

Love you videos and skating! Is there a flat frame you’d say is close to the aeon frame groove?

[@wheelsceneblading]

@@Nickolearr hmm. Not sure. I don’t really like the Aeon groove. It feels too wide for me

[@allymalcolm6769]

Great stuff as per! What's your thoughts on the Kaltik frames? V1 or v2

[@wheelsceneblading]

@@allymalcolm6769 they were one of the frames I tried to skate flat in about 15 or 16 years ago and I just couldn’t get along with the groove. The axles also kept coming loose. I know they’ve improved their hardware since then.

[@chalkknees1754]

V1 ftw ❤

[@franklingaebel]

Digging the background! How do you feel about oysi frames? Feels like that was the only brand left out of the video, that i can think of at least lol

[@wheelsceneblading]

@@franklingaebel I’m tempted by the FR ones but I don’t like the idea of riding two different sets of wheels on the standard ones, that would drive me mad! Yes, I’m weird.

[@franklingaebel]

@wheelsceneblading lol I get it, finding wheels of different sizes that also go together can be a bit of a challenge at times. Mushroom made some that match for the medium frames. I always wish that pro oysi riders would get their own set of pro wheels that would fit the frames, but doubt that would be cost effective for the wheel companies lol

[@wheelsceneblading]

@@franklingaebel yeah, probably not. Definitely getting a set of the FR collab frames though

[@franklingaebel]

@wheelsceneblading yeah I kinda missed out on those, I think every shop in the states sold out of them, at least my size. But yeah I've heard nothing but amazing things and I haven't seen anyone really post them on blade trade so they must be liking them

[@chinobean3555]

maybe its cuz im old but on the ag60 those little different color slider pieces really dont mean shit to me. def not a selling point but i do want to try the ag60 cuz i havent yet. the past 5 months has been the search for the perfect flat frame.i think my next one is the fr oysi or the50/60 prime. prolly the ufr oysi since its almost half the price lolol

[@LifetimeShred]

Are you reviewing the FR Oysi’s soon? Wonder how that would fit on this list.

[@wheelsceneblading]

@@LifetimeShred hopefully. They don’t arrive in the UK until august

[@LifetimeShred]

@@wheelsceneblading Excited for your review. You are more thorough than most and it is appreciated.

[@wheelsceneblading]

@@LifetimeShred thanks!

[@stuckontranslation]

Hi, I'm seeing the Olympics and "breaking" is a competition. So now I'm wonder why Rollerblading Freestyle is not an Olympic competition? Can you do a Video about that?

[@wheelsceneblading]

@@stuckontranslation for the same reason we’re not in the X Games, there’s not enough money in rollerblading.

[@wheelsceneblading]

@@stuckontranslation kzbin.info/www/bejne/bXzXl3tjnpJ9jJYsi=ERY6Ml8gbXKtMBKB

[@claudineielvbergb.4692]

Ricardo Lino da Gran Bretanha....

[@wheelsceneblading]

@@claudineielvbergb.4692 you’re the first person who has ever wrote that.

[@TuckerFreeland]

You need to try symetrics and skate them 65mm flat

[@wheelsceneblading]

@@TuckerFreeland tried the frames before, didn’t like the h block

[@chinobean3555]

i got those same flt4s. im trying to find someone with a black h block to trade me lmao. cuz my skates are all black and white so it would look titties on my skates

[@southcoaststreet]

If you got Diris for £110 you got a bargain. Easily £150 now.

[@wheelsceneblading]

@@southcoaststreet oh, really?!

[@wheelsceneblading]

@@southcoaststreet maybe they were cheaper because it was a small run

[@southcoaststreet]

@@wheelsceneblading The new batch? I got those too and was basically £150 with the exchange rate against the Euro. Although Mark kindly offered to cover shipping as a repeat supporter which was awesome.

[@southcoaststreet]

My bad, just checked and was £135

[@wheelsceneblading]

@@southcoaststreet maybe he did do me a deal after all!

[@Binjuice]

no kaltik, scandalous stuff.

[@wheelsceneblading]

It is probably about time I try them again.