Best Intake INSTALLED!

[@RTLife]

I would say this intake setup is one of the best for the buck options! Let me know what you guys think....

[@joshreynolds729]

Love the stock hellcat air box design it is the best intake for the scat. However the higher flowing filter idk know about. That’s afe’s air filter? Or the fram OEM hellcat air filter? The oiled filters screw sensors up and it’s a misnomer to that they flow better while becoming clogged faster needing more frequent cleans. Infact the best flowing air filter for this is the one that came in the older hellcat models. They flow more cfm. B mason has a video on all the specs vs a k&n drop in which I believe is comparable and the same style you dropped in. I’m sure the gains are minimal but every little bit counts right. Apparently srt did their home work because I’ve been at this with my cat for a long time. Would like to switch to a demon hood but have the older style with different intake sensors which screws me from getting a newer hood intake OEM intake to gain even more as that system was designed to work with 18 and newer hellcats but it is better. Excellent video once again man. Just some things I’ve learned that work better on the cheap. Hope it helps someone.

[@lb9355]

Get rid of the oiled filter asap. Oiled filter will damage your mass air.

[@skyshreet3]

Can you drop the link

[@joshreynolds729]

@@skyshreet3 sorry man I don’t. his videos are weird because they aren’t titled as 1 thing but in at-least 4 of his videos in the past I’ve watched he has stated these facts. It’s the stock hellcat 15-16 paper fram drop in filter. Sorry don’t have a part number but you can find it on any mopar store. Just put in you have a 16 hellcat and look for air filter OEM. Get the part number and then search for a cheaper one else where. Cheaper than a oiled filter less problems and more flow. Only down fall is you have to replace it more frequently. Hope that helps.

[@veizii6096]

I just did the same on my Widebody and it keeps my intake temp down so much. Definitely a good easy mod 🔥

[@Teddybaer06]

I've got an older 3.5 V6 and this channel looks like the perfect club to join

[@CmcMods]

It's I was just looking at a intake upgrade and then few minutes later here you go with this video posted I can't make this up LoL

[@RTLife]

hahahaha - timing is perfect! This is a nice little upgrade & it doesn't break the bank

[@hemichallenger3643]

My 18 Shaker has the lower airbox like that already. I bought the tube that connects it to the headlight inlet from Steve White motors, and it bolted right up. Now mind you, everyone will now say, hey, you lost the trim ring to your headlight. LOL

[@RTLife]

I think it's worth it. Having the air coming through the front should really help intake temps. Almost like a small ram air setup. Really glad I did this! You shaker guys have a nice intake setup out of factory

[@muzikaali6249]

I have the 19 shaker - I will do the same and get the tube that connects to the headlight inlet. How much did the tube cost you?

[@hemichallenger3643]

@@muzikaali6249 I think it was about 35 bucks.

[@DJGRoc]

Only car enthusiasts will notice the plug not being there. I took out both on my car within a month after owning it. After 5.5 years, no one notices until I tell them.

[@Bob-gy6ud]

The other headlight also has a removable plug. And a kit is made to bring cold air into the engine bay to assist in engine cooling. This mod may not increase engine performance but helps in reducing under hood temps. But from the aesthetic point it opens the passenger port to match the drivers port. On AM muscle they sell a headlight upgrade kit to give this option for the 2008-2014 challengers too

[@zacchwith2Cs]

I plan on getting a Challenger RT in less than a month. This is DEFINITELY the first thing I plan on buying for it. Thank you🔥

[@jamesadams4304]

For more cold air... there's a plastic tube duct that feeds your left front brake in your fender it runs from your lower grill to your splash shield , to remove the duct, remove your air filter box , reach in down in the intake hole and pull on the tube , a section of the tube will come out . Now you will have cold air in your fender area to feed your intake also, it makes a big deference on your intake Temps! There is videos of this mod .

[@RTLife]

Do you have a link to any of the videos? I have to check this out

[@jamesadams4304]

I'm sure how to send links lol... it's a "B Mason vidoe" Hell cat lower box install ,brake duct mod It's a old video about 6 years ago . If you haven't done it yet remove the other cap from the right hand light assembly. Let's more cold air into the engine bay

[@hemiheritage]

👏 Well done and enjoy the journey with this beauty as I know we will all enjoy this journey with you🤜

[@RTLife]

This thing is so much fun! Going to love every step of upgrading this 392!

[@darkhorse5506]

Glad you got a scat pack! Excited for ya, and watching the build from the beginning. I caught the charger build later on.

[@RTLife]

This is going to be a nice street/strip 392 - not as wild as the 397 twin-turbo but still a fast ride!

[@paulvincent3825]

Thanks!

[@RTLife]

You are the man! Thank you very much Paul - always greatly appreciated.

[@dodgeboy90501]

I can't remember what it's called, but when I installed my Hellcat box on my Scat Pack, I used double sided foam tape to seal the bottom of the airbox to opening, it was about 1/4 inch wide.

[@RTLife]

I should do that as well. Thats the right way to do it

[@dodgeboy90501]

@R/T Life tape is about 1/4 high and 1/4 wide, I got it at Home Depot.

[@DJGRoc]

The factory air box was like that. At least on my R/T it was, so good call there! 👍🏼

[@OctonaBoyFresh]

FACT

[@DoctorHemi]

Love the triumphal music as you finished the job! Nice touch! 😄

[@maxririe8346]

The rubber mounting isolators from the OE box are supposed to be transferred to the hellcat lower. Have had the lower box/tube on mine for a few years now. Works quite well.

[@RTLife]

Going to go back & install that so it seals everything up better

[@fredwilliams7893]

Best part about this intake is it cools down IAT very quickly when its cold out ! Works amazing! 👍

[@RTLife]

It's def a nice upgrade - it's like a small ram air system. I like that as you drive that box is getting filled with cooler air. Very happy I went in this direction!

[@TA_Plus_Hemi]

After seeing the lower air box in the live or earlier I'm pretty sure that is the one I have on my car stock. Mine is the same lower air box that comes on the Shaker cars. I still can't believe it moves are like that. I thought the halos were more for force-fed air while moving. You amazed me with that 👍👍

[@RTLife]

It's a pretty solid option for those with base model trims. It's impressive how much air is being grabbed from the headlight inlet. Def going to help with temps while driving

[@transam1870]

Hellyeah! T/A alllllll the way!!!

[@TA_Plus_Hemi]

​@@transam1870 yeah it's a T/A and a 6-speed

[@DJGRoc]

You do get more of a ram air effect when driving, but it still sucks in air regardless.

[@brooks74silverbee]

I got that same setup for Christmas. I now believe in Santa again!!!

[@RTLife]

hahaha! Nothing like car parts for Christmas - I love santa!

[@tommyketchup3234]

I think your channel is underated.

[@RTLife]

Thank you - def appreciate it man. Going to keep grinding & having fun

[@reecejackson5088]

On my 3.6L pentastar it improved my 0-60 on top of my rear resonator delete. 6.1 on a slight uphill and semi wet roads. Was gripping the steering wheel big time! Super happy with this mod and i’m sure with correct circumstances this mod got my car into the high 5s📈

[@peacauve]

You got the best videos on these mods!

[@hellcatredeye-g6582]

As a Mechanic you made it look so easy😊👍 I definitely like the hood

[@RTLife]

haha that's the 1st time I've ever heard that! Thanks man, def appreciate it

[@southdetroitentertainment7741]

Job well done sir

[@RTLife]

Thank you very much. Def glad I ended up going in this direction. Nice bang for the buck

[@347mav3]

One of these days I'ma get me another Hemi....

[@RTLife]

They're a ton of fun - you will not regret it!

[@alansoler2653]

Yo you had me crazy laughing how excited you got, cause I get the same way! Great upgrade bro!!

[@RTLife]

Hahaha I get so pumped when I installed things myself & it works out! Thanks man - def appreciate it

[@justinvostad6359]

I did this exact man I use weather strips on the bottom of the airbags and on the air tube to make it sealed a lot better, and I took everything off my old airbox and put on my new airbox, including the rubber piece where the screw goes in the model is simple and very easy and it is noticeable with other upgrades

[@RTLife]

I'm def going to seal this up soon. So far this has been working really great though. Nice upgrade for sure

[@chriswilliamson806]

For anyone with the newer challenger headlights. They don't just pop out. They have a cap and torque bit on both sides of it you have to unscrew.. I did that on my 1320, and did help Temps among sound..

[@Bossman027]

What filter did you get? I got the litter box and tube in mine but I need to get a better filter

[@RTLife]

it's AFE drop in filter for hellcats.

[@Bossman027]

@@RTLife dry or oil?

[@RTLife]

Reusable Pro 5R Filter Media Features Five Layers of Progressive Oiled Cotton Gauze

[@Bossman027]

@@RTLife awesome. Thanks. Going to order one now

[@319speed]

If I had a demon hood I'd opt to use it me personally but still either way. A upgrade is a upgrade! Good job bro!

[@RTLife]

I just couldn't get myself to buy a $500+ intake hahaa! One day I will suck it up when I'm making more HP/Torque

[@hemihead392]

The hellcat lower box/front light air tube with a MAHLE LX 3482 air filter really is a great setup and performance wise is second to none. The Mahle filter out filters and out flows almost everything else and is the Hellcat OEM filter. Check out the specs. Lastly there are some cool screens for the front intake if you would like. Keep rocking the scatpack! Very fun cars.

[@RTLife]

I will check it out. Always up open to installing a better part on my cars. Thank you for the heads up

[@ivann7214]

I just got a V6 Challenger. Dude before me put in a k&n cold air intake and a mbrp quad muffler. I popped those headlight caps out because more air ❤❤

[@ModernRedHemi]

The hellcat lower air box is the best bet. I’ve tried many on my shaker and the stock box wound up being the best. Awesome video brother! I forget where I got my screens for the opening but I think several aftermarket folks make them. Highly suggest getting them to keep the big stuff from entering the air box.

[@RTLife]

For the $$$ this has to be the best setup. It's like a mini ram air setup!

[@paulvincent3825]

I installed the AFE intake on my Jeep SRT, but I chose the open filter model. It really it gave A much richer sound and better breathing for the 392. 😎😎😎

[@RTLife]

Nice! Glad it made a noticeable difference. AFE has some solid products

[@killerb3ar444]

Wow this thing looks amazing and you do a great job showing it! What a Duo you have 👍🏽

[@Justtwodangmany]

R/T! I need your headlight intake caps that you showed us! I want to block mine off and being a mopar part, theyre incredibly expensive IF you find them anywhere

[@RTLife]

Why are you looking to block yours?

[@Justtwodangmany]

​@@RTLife because everyone has quad halos. I have cuda style dual halos, and the blacking out removes a lot of the amber light refraction, so these front side caps would help refract more amber light forward if i add foil tape. These are positioned at the forefront of the intake arent they?

[@DJGRoc]

​@@Justtwodangmany The caps snap into the headlight assembly. And only the ones without the light tube.

[@Justtwodangmany]

@@DJGRoc well damn. I have the stupid light tube style.

[@DJGRoc]

@@Justtwodangmany I'd be happy to take you headlights, but I'd need a new wiring harness to go with it. 😕

[@doolallyproductions7234]

That was the first mode i did for my 392 for some reason the cut out is there for the shaker hood but not the tube i had to buy it to

[@RTLife]

That's nice - the shaker has a great intake setup out of factory. If you get that inlet it's a nice $40-50 upgrade to make sure your intake is grabbing cool air

[@doolallyproductions7234]

@@RTLife it was when i would start driving the intake air temp would drop in just a few seconds

[@Murphys_Law9]

Bro you the type of guy that need that hellcat

[@RTLife]

LOL - I'm having a blast in this 392!

[@Murphys_Law9]

@@RTLife I know you said the same about the 5.7, you’ll get one eventually 😉

[@RTLife]

hahah you never know! I need my Charger back so I can enjoy big power when I have the itch

[@Shanbo]

Hopefully, the Charger will be returning soon

[@Bigherm5.7]

When will you be getting the Charger back?

[@aFePower1]

Great video! Glad you like it 🔥

[@RTLife]

For me this was no brainer intake package. It was a simple install & works great. Very happy

[@RtBoat]

Nice! I had that hellcat box for a while worked really awesome I changed it up goin with legmaker with the filter down the bumper that thing works like crazy good just like the hellcat box 👍🏼👍🏼

[@RTLife]

I like the idea of air being forced into the box while I'm driving. Def a solid little upgrade for the price

[@RtBoat]

Definitely worth it 👍🏼👍🏼

[@bossstrick]

Wish my charger was that easy to install the hellcat air box that utilizes the grill snorkels as an intake location

[@RTLife]

I didn't try it on my Charger but man this was super simple.

[@DJGRoc]

The setup on the Charger is different. There's a vent in the grill for it, but only on the Scat Packs & Hellcats. I think you have to replace the whole front fascia on the other models to get it.

[@OctonaBoyFresh]

​@@DJGRoc Not for chargers 2019 and up you don't

[@CTHellcat]

Man, it's so much easier to access the front bumper area on the challengers than the chargers. Pretty much have to take the entire bumper off on the chargers because that plastic top cover is such a PIA. Yeah though, $500 for an intake is a bit much for a NA motor, so this is a nice option.

[@RTLife]

I couldn't believe how easy the install was! The prices are a little silly for intakes, so I figured this would be a nice little upgrade for now. Hellcats have really solid performance parts already in place - that headlight air grabber is really a great idea

[@MisterS4League]

I like to use the ducts in the lights for a brake cooling kit.

[@kirkkarnage6344]

I ordered the JLT cold air intake. Cost me $350 and it lets you use the stock intake spot, the headlamp hole, and the demon hood.

[@RTLife]

Do you have a link to it? All these intakes are like $500+

[@alexander_3923]

Do u have a link

[@LineMUp321]

Pretty sure someone has already stated it our you've seen it but you can just modify the top of the airbox so that when the hood is closed you get air from both.

[@prestonhelmick566]

I feel you could use an open box to also allow air from the scoop in. I would find out what the thread spacing is for that bolt and find a longer one at Home Depot and add some spacers so that it gets a tight seal with the hood. While also using the rubber headlight duct so it can flex the way it needs to. (The plastic one won’t) Also I did a mod that only slightly helps only while moving. I took the driver side fog light out and put one of those specter tubes from auto zone up to the fog light opening and to the bottom of the air box

[@BurnseysRT]

Nice!!! That will be better than most intakes IMO. Especially after actually seeing the results and not even moving. Also my 19 Challenger I was able to just pop out the cap like you did. I want to say it was later model 2019s or maybe 2020s that are screwed in. Can’t exactly remember.

[@RTLife]

Yah I forget what year it changed but I know it did. Either way this is a no brainer upgrade if you can get it for a solid price. Really happy I did this

[@Smurf345.]

I have the snorkel on my RT and was wanting to set mine up like that, i want something different then the corsa I have. Great video as always 🔥🔥🔥🔥

[@RTLife]

Grabbing air from the front really does help - you will not regret it

[@Smurf345.]

@@RTLife I'ma have to give it a try, thanks man

[@MrIzzy123]

I see you finally got a scat pack nice!!!

[@RTLife]

One of the best decisions I've made. Love this thing!

[@motownrace]

Clicked on the video knowin exactly what Intake you were talking about. I’ve got the same on my challenger it keeps intake temps extremely low compared to stock

[@RTLife]

I think many of the Challenger guys do this because it's such an easy upgrade. Def a nice upgrade!

[@392starsnstripes]

Should of gone with JLT intake it would allow you to take advantage of both set ups the hood and head light for an extra $150 and it guarantees an extra 8 to 15 hp gains

[@RTLife]

I was looking at the JLT for around $300 - I have something similar sitting in my garage. I like the idea of a closed box for now & grabbing air from the headlight. As I add power my mind will likely change though

[@392starsnstripes]

@R/T Life I tried an AEM filter for my 392 at first and didn't see any benefits from it (power,gas mileage or cooler temps), I saw more benefits from the hellcat oem paper filter which I ran for a while till I got my JLT

[@Fade2BlackSS]

I second the JLT. I had one on my 5.7 and I absolutely loved it.

[@krazydrifterful]

Just got my brand new 2023 scatpack and i was looking for mods and will definitely do this mod. Hopefully it dont void my warranty

[@Monster86s]

I got the Jammer intake on my 22 scat it’s a intake . Lol might gain 5 horse pony’s

[@RTLife]

yah its not really the best for HP gains but as you keep adding power it will pay off

[@OctonaBoyFresh]

Gotta tune it to that intake to get the gains. People forget that

[@Monster86s]

Yeah I’m on hp tuner tryn to get tunes dialed in have Diablo also but hate it . But I do like the gauges on the Diablo .

[@MrGrenade22]

nice I love it ,mopar power to you homie ,I have a widebody shaker 392 ,wish they had the tube for my car for more air flow threw the headlamp

[@RTLife]

It's a nice upgrade. Kind of a small ram air setup

[@Srt_Kev]

When’s the wheels going on I’ve bin waiting to see them i see B Mason got a set on his hellcat and they look amazing

[@RTLife]

I just got the spacers - so they will be on in the next couple of weeks (hopefully).

[@Srt_Kev]

@@RTLife spacers we’re needed really ?

[@RTLife]

yah they're to close to the front brake calipers. I'm going 5mm

[@Srt_Kev]

@@RTLife aww gotcha

[@Gazzo-d5d]

What exhaust set up u have? Sounds nice

[@actionjackson1k352]

Cool car= cool guy 💯🔥🔥🔥

[@RTLife]

Thanks man, def appreciate it.

[@DJGRoc]

You just need to get the T/A style air box to take advantage of the air grabber hood.

[@OctonaBoyFresh]

I was thinking that

[@RTLife]

All of those OEM setups are crazy $$$

[@DJGRoc]

@@RTLife it's cuz they're discontinuing the cars. I couldn't find the coil spring isolators at any Mopar retailer recently, cuz they all said that they were discontinued parts. Had to resort to eBay.

[@OctonaBoyFresh]

@@RTLifeTrue. Perhaps you can get your hands on a used one.

[@Fade2BlackSS]

@@DJGRoc They were expensive before that too. I remember looking at one back in 2020 and the setup was damn near 1k just for the scoop duct kit. (I already had the TA-style hood on mine) I think on the low-end it was around $700.

[@Taylor_Sounds]

sooo i don’t wanna give up on my 22 challenger rt… i was, but seen there’s so many ways to increase WHP. Is afe significant?

[@jameswhitesell3076]

I have a 2019 rt and the insert cap is the same. I went with a k&n intake that is open in the front so i dont need the tube

[@RTLife]

How are you liking it?

[@jameswhitesell3076]

@@RTLife it works great. Ive had it for about 2 years now. When the temps are below 100 degrees outside, the intale temps are within 5-8 of ambient temps

[@timmorton6049]

Did you notice if it dropped your average air temp?

[@RTLife]

While drive with this new setup I was around 5-10 degrees over outside temps. I think it does help but I forgot to monitor the before

[@jax9114]

I might of missed it but what happen to the charger?

[@RTLife]

The built Hp90 is getting tuned at a performance shop. I got that along with upgraded fueling (triple pump, new lines, fuel rails etc.)

[@ashotbalasanyan7993]

I’d love to see my run at OSW if you still have that vid brother!

[@RTLife]

DO you have instagram? I have to look for it but I can send it to you

[@illwillscuts]

Hey, so i know this a little random but with all the experience of mods on your Charger i was hoping to get an opinion. i was quoted 11.3k on my 2020 challenger R/T for PCM/Longtube headers/stage 2 hrt cam/ and tune with all parts and labor. Is this reasonable or should i take that money and just trade up to a Scatpack ? Any opinions would be greatly appreciated!!

[@RTLife]

PCM $500 + Long tubes $1500 + $3000 Cam/Parts + 500 dyno tune = $5500 (ballpark) Which would make Hard Install Labor = $5800 (ballpark) I love modding but only if you're getting solid deals. That's a lot of $$$ for how much power you'll be walking away with. If you can afford a 392 go for it or try finding the parts at discounts a upgrade the 5.7L one at a time for a good deal. I hope that helps

[@illwillscuts]

@@RTLife greatly appreciate the response! I was thinking that but i felt it better to ask someone with experience with all these mods!🤙🏼👍🏼

[@1320_ikimasho]

When I did mine I noticed the top of the airbox has ribs. I'm not sure if there's a reason. Was thinking of grinding it out.

[@JasonGroze]

Did you?

[@3stacks269]

I have the same install in my 2016 challenger R/T and I feel like my car wakes up a Lil in the winter, cool mod 5-10 horse but very cool mod✌🏾

[@stevealoia]

That was my 1st upgrade to my Challenger. What’s going on with Charger.

[@RTLife]

The charger is struggling! The tuning for the built hp90 is underway

[@init5887]

Great job!! Can you share the links of items you bought ?

[@LouHemi]

This would fit on a 2023 dodge charger r/t?

[@waynebrown9877]

What is the part number for the hood and where did you get it from?

[@katalyze9600]

would this boost ur 0-60 more than a standard cold air intake?

[@dbsdodgeboy]

Dude, if you remove the lid and that little rubber tube it is soooo much easier.

[@Shadow_of_Yharnam]

I had no idea the headlight part just pops off. I might do this next to my ScatPack. Awesome video bro💪

[@jeffreynye3019]

Next: a nice pretty red catchcan!😎

[@jamesfrancothestout6602]

What are your plans for your 392 exactly? How far are you going to take it as far as mods ?

[@RTLife]

I honestly have no clue. It has an unlocked PCM with a tuner ready. Wheels & radials ready. Just need to figure out the road map I really want to take & make it happen.

[@jamesfrancothestout6602]

@@RTLife I’m in the same predicament, I have a 2020 scat pack charger, so far all I’ve done is put a wide body kit ( only the rear of the car ) with 305’s in the back and 275’s in front. I hope you figure it out so we can have a blueprint lol . Our cars are difficult to make fast lol .

[@Smurf345.]

How does it sound, and do you feel a difference?

[@RTLife]

I think it's the same - but it does work really good.

[@Smurf345.]

@@RTLife ok, thank you, keep the 🔥🔥🔥 videos coming.

[@jasonbay2872]

Wouldn't this allow water into housing when driving in rain?

[@1320_ikimasho]

There's an opening in the bottom of the lower box so any moisture will just fall out of the bottom near the wheel liner

[@maxverstappen5367]

Will snow or rain go inside the intake?

[@taxinator5858]

That is much easier than the Chargers…requires removing the front bumper cover. For the 2019 or 2020 Challengers, the cover is screwed in place and the small tube is a bit different in shape.

[@RTLife]

I never really considered doing this for the Charger - just looked to easy for me not to do for the challenger.

[@racetherapy]

Funny how the 2016 shaker scat only needed the Mopar tube. Air box already had square opening

[@RTLife]

yah all the shaker guys seem to have the opening already in place - all you need is the connecting tube

[@dmedford5]

Would this work for SXT's also?

[@anthonymillien74]

wassup R/T life or anyone who can answer this! im working up to get a 392 charger this year maybe white or light gray color and is there mod like this for the chargers?

[@iCouchella]

I had the same issue when I put the redeye hood on my scat pack. I already had the hellcat air box on and the bang for the buck wouldn’t be worth changing to utilize the hood funnel

[@RTLife]

Same page as you. Just not worth the $$$ to grab some additional air from the hood. This works really good anyway

[@shun9654]

How about left hole ?

[@theproduct456]

Where did you get that hood from?

[@RTLife]

Vicrez. It's the Demon hood www.vicrez.com/vicrez-hood-air-vent-scoop-demon-style-vz102129-dodge-challenger-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020?search=challenger%20hood

[@theproduct456]

Yea wow thats a nice hood

[@abelvaldez6660]

Can't wait till u put those tires on with 315.

[@RTLife]

Just got the spacers 5mm - so I can get them on soon

[@henchmafia8375]

would these fit on a 2015 challenger sxt???

[@MrFcwright]

Will this work on a 2017 SXT

[@RTLife]

Yes it will

[@garyfuller392]

Sweet!

[@RTLife]

Thank you very much!

[@YsoS1R1US]

Are there any good tunes that won't void warranty

[@johnlimpkin]

Nope

[@sportmedtech]

Where did you find it for that price?

[@RTLife]

I bought it on their website a couple of weeks ago. It just shot up in price!

[@mikepearson1311]

How’s the tune on the scat???

[@RTLife]

No tune yet. It has an unlocked PCM but stock tune still

[@mikepearson1311]

@@RTLife how long before u put the tune on??? I have a appt may 5 to put a hp tune on mine… was just wondering about how my hp should I expect to make… Happy Easter by the way, to you and ur family

[@Almighty7266]

Do you think the non silencer tube is worth adding ?

[@Almighty7266]

Also could you add an intake system on top of the air box ?

[@MarvinWilliams-og3ql]

Love it

[@anthonymillien74]

@RTLife hey man so im assuming only the challengers have the headlight air intake? Not the chargers?

[@realkingbluu4861]

Could I just not that part out of the headlamp and my car be fine without the setup

[@IjohnnyproI]

👍🏻

[@RTLife]

Thanks man!

[@KingSavage96]

Haha ❤🔥🔥

[@RTLife]

Totally worth the $$$ - glad I installed this.

[@KingSavage96]

@@RTLife I been hearing about that Gt Bentley as well. The hype makes me wanna try that one too! Good deal 👌🏾

[@islandRT]

John 3:3-Verily, verily, I say unto thee, except a man be born again, he cannot see the kingdom of God. John 3:7- Marvel not that I said unto thee, Ye must be born again. John 3:16-For God so loved the world, that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. ✝️🤍🙏🏼

[@Tj5XX]

Does this work on 2018 challeneger rt ??