Best Locking Mechanisms for EDC Knives | Triad Lock

[@PockeTanK]

Mannnnn that Tri-ad lock is next level Hulk. I really like it!!!

[@NeevesKnives]

Mee too!!! I thought I had an ad15 on the way, i dont know whats going on with that, I cant wait to check that one out

[@jonduncansakurawallknifegarden]

Oooooo that is sweet. That’s one I want to see.

[@myhandlewastakenandIgaveup]

I used my cold steel mini ak47 as a pry bar (mid blade not tip) tge other day and felt no fear.

[@NeevesKnives]

@@myhandlewastakenandIgaveup noice!!

[@Eldofarmboy]

Triad lock is for sheer beast factor. In my experience the compression lock is actually stronger than the axis. I've had axis locks fail under batoning where the compression lock has never failed. That's just my personal experience though. Even a properly done liner lock is still pretty strong. Look at the ZT 0350 and Steel Will Plague Doctor. I did horrible things to those knives and neither one had any issues. I just prefer compression and triad when I go to the woods in case I need pure beast factor. EDC I generally run frame, liner, or axis while keeping my PM2 close at hand should SHTF

[@NeevesKnives]

Yeah for sure in the woods you definitely want something strong, I usually want a fixed but a triad works too. Since I do construction ive broken knives had many fail under pressure, but I was for the most part abusing the knives and dont consider that normal edc, but ive also been the guy in many many cases where normal isnt normal and had to do crazy things with knives, so I at the very least want reliable

[@hagninety4116]

Is the pm2 tip strong enough to rely on?

[@NeevesKnives]

@@hagninety4116 if your only cutting and not prying, and not baring down on the tippy tip most likely, ive never had a blade snap from slicing or cutting

[@NeevesKnives]

@@hagninety4116 i thought you were asking me 😆

[@GastonShutters]

Minute 5:36 Him: "I get you" , Her: "You better get me, " Him: "🤐💩😰"

[@oceanwaves83]

I don't think y'all realize how strong 1 inch tall steel blades are, lol. Great video. You guys are cool.

[@NeevesKnives]

Thank you! And I do understand I've broken enough of them

[@oceanwaves83]

@@NeevesKnives the blade snapping before a compression lock fails? 😂 Even the triad lock/pivot fails before the blade snaps from longitudinal pressure. The blade could possibly snap from *lateral* pressure, but these knife locks aren't designed to prevent lateral pressure. Very few are. Not trying to knit pick, just saying. That part stuck out to me. But perhaps the blade could snap if it was made of Rex121 or Maxamet at 70+ HRC.

[@TheKnifeBeater]

Thanks for the video guys. I have to say, your video editing is fantastic.

[@NeevesKnives]

Thanks Beater!! We put alot of work into it especially Kara with the editing

[@kevink.2719]

Always a positively enjoyable time watching your videos you guys seem so natural keep up the great work 👍 great breakdown of locking systems

[@NeevesKnives]

Thanks Kevin!! Your always supporting us and that means alot to us!!

[@brazilchild]

If you’re going to sit on the couch all day and flip knives you’ll be fine with the liner lock and even fighting cardboard boxes, but if you’re going to use it as a survival or camping knife I would go with Tri-Ad Lock - Cold Steel. It’s not for the dainty.

[@NeevesKnives]

I would to, or Id just use a fixed blade especially for survival or camping, but for edc that you carry in your pocket to do basic cutting framelocks axis, compression, liner exc.. Are very strong. Ive broken many knives but I was doing construction and using the wrong tool for the job.

[@frankiejdwm_edc1037]

You guys have been putting out some great content, everybody has different opinions on lock strength versus action, ease of manipulation, etc. I'm in construction and I use my knives every day never had an Axis lock, or compression lock fail on me have busted the tip off of a PM2 but thats the only fail I've ever dealt with. I beat on my 940, have pryed, ripped apart 2x4s, hammered into drywall, plywood, etc it is a beast, and just disappears in the pocket. As far as work knives go the 940 is my go to.

[@alphadawg81]

But...the axis lock has failed before. Check out DBK. I'd trust it in an everyday situation but never as much as the Tri Ad when it comes to heavy duty tasks.

[@NeevesKnives]

Of course, both are incredibly strong, but the tri ad and shark lock are the strongest

[@jessruss40]

Loved every minute of this video!

[@NeevesKnives]

Thanks man!! It was a fun video we are definitely gonna start doing more videos like this, we still have the Kizer getting edited that was a great knife your gonna tell from the video that I really liked it!

[@jeffsmith6441]

Until recently I had only experienced frame, liner and back locks. A few weeks ago I got a Para3 LW which has the compression lock and a Bugout which has an Axis lock. I haven't been in a situation with them to make them fail. I try not to abuse folders just for the reason of not wanting the lock to fail. A fixed blade is another story though! LOL

[@NeevesKnives]

For sure!! They are all pretty tough when you watch videos of the testing youd be surprised how much they can take, more than my body weight can create

[@jeffsmith6441]

@@NeevesKnives I've watched blade HQ lock testing. It's crazy how much they'll hold! Definitely impressed me!

[@NeevesKnives]

@@jeffsmith6441 theres another guy who has a shop and they did some crazy tests until they broke, the compression lock i think went to like 380 or over 400 i forget but it was alot and the triad was like 800

[@jeffsmith6441]

@@NeevesKnives 🤯 Wow! That's incredible!

[@EverydayCityCarry]

Nice breakdown of locks, friends. The triad lock is a G. I really like the edits you guys did in this video. The background music was cool too. Also, there was nice collection of knives shown here.

[@NeevesKnives]

Whatsup Ray!! Its nice to see you checking us out!! We love that you do, and we are trying to make the videos watchable, and we have that new segment coming soon We think you will like it! Il letu know when its done id really like your feedback

[@EverydayCityCarry]

@@NeevesKnives Sure. Let me know. 😁

[@jf4572]

I love watching you guys 🍻👍 Strong couple and cool knife knowledge 😎 👌 👏

[@NeevesKnives]

🙏

[@ocomegashadowstacking5886]

Wow really awesome reviews!!! :D

[@NeevesKnives]

👍

[@PaulH_1972]

"you have more chance of stuff happening!" best quote yet from Kara. Fantastic 🤣😂🤣😂🤣 Very informative, loads of belly laughs, & lots of different knifes. What more could a person ask for 👊🤓👌

[@NeevesKnives]

😆 thanks slicer!! We have a ton of fun doing this and ow so much to this community its very addicting

[@zachstuff]

What a fun video and topic!!!

[@NeevesKnives]

Thanks Zach! We enjoyed making it, glad you liked it!

[@patrickvanovermeeren4513]

Great topic and video ! Good job guys !

[@NeevesKnives]

Thankyou we try to come up with fun videos sometimes and were gonna do a bunch getting close to xmas and all

[@cuervocuervin8859]

God bless you both. I really enjoy this content.

[@jojojeep1]

Friend I picked up the right gauge memory wire and I make my own omega springs and they work perfect

[@NeevesKnives]

Nice thats very smart I pay like 6 bucks a pair and so far they are very strong and havent broken

[@jojojeep1]

Neeves Knives Me too I paid six dollars online I found them then I figured I might as well make them so I don’t have to wait

[@NeevesKnives]

@@jojojeep1 nice! Yeah i should probably make my own also actually i think i will

[@jojojeep1]

If I remember correctly it’s 20 gauge memory Spring

[@NeevesKnives]

@@jojojeep1 thank you!

[@bigboreknifegear8349]

Really good little educational video guys👍

[@libbya2]

Great video, you two are a joy to watch.

[@NeevesKnives]

Hey thanks!!! Your awsome for watching!!

[@hugodanner8500]

Great job guys!

[@NeevesKnives]

Thanks Hugo we apreciate you watching and commenting!

[@rhino5419]

Hi there. Another great wake up morning show. (For me). I would agree that strongest does not always mean best. It all depends on your usage. I would further say that a lock is not always necessary. Some times a slipjoint is all you need. Though they are rarely 1 hand operation. It all comes down to choosing the best tool for the job in hand and as Jared said, if you really need a super solid lock you should probably be using a fixed blade. All the best, good health and stay safe my friends.

[@NeevesKnives]

Yeah! Have the right tool for the job, sometimes I pry with my knives at work, but i know that it can doit because its a tough knife, if it cant i use a prybar

[@aznelite325]

I think most locks are pretty much way strong enough, but not all of them are as shock-resistant to impact as opposed to constant pressure. The only knife I've actually had a lock fail was a liner lock, and that's because the liner bent - but it still didn't fully close! I love the Tri-ad lock though.

[@NeevesKnives]

For sure!! Ive broken lots of knives but i was doing stupid! As long as you have the right tool, then your fine, even some knives can pry, but its gotta be the right shape and thickness otherwise get a prybar

[@rickkerans8485]

Got to agree with you the best lock needs to be strong and able to be used 1 handed and smooth. Just something about having a smooth operation and the sound of the lock. One reason I like the Freeman folder. Code 4 is awesome just a little trickier one handed. My hand is big enough to do it but not something I want to have to think about. I know if I used it enough I wouldn't have to think about it. If you are doing something that you think is going to break the lock or the blade for goodness sake get out a fixed blade. Doesn't get much easier to get out use and put back.

[@NeevesKnives]

Igsacly use the right tool, ive been known to do crazy stuff at work with knives, but if your knife isnt capable at prying something get a prybar out,

[@NeevesKnives]

Oh yeah and the freeman is an awsome knife i love that knife

[@hyssean12]

Also the bar doesn't have to break on a axis lock for it to fold. Just like a framelock it can slip off of the tang of the blade allowing the blade to close.

[@NeevesKnives]

Yeah prolly more weight than im gonna put on my knife, id get a prybar, thats were the most likely came in, and then you gotta consider blade thickness I dont normally stab my knife into something prying with the spine of my blade, especially with enough wight to do either I try to use the propper tools

[@rustyknifelover4463]

I like the Triad Lock, but want to try the Ant lock.

[@NeevesKnives]

Yeah im not to hyped about the ant lock but i love the concept, and maybe i will be in the near future

[@elrockerchido]

For me pm2 and compression work the best, but that may be just me being super familiar with it

[@NeevesKnives]

Sometimes the thing your most familiar with is what is best

[@JadeSchafer]

Just got a skblades marksman, so cool. Great lock talk.

[@NeevesKnives]

Thanks Jade!! Thats a badass knife with some of the best cutting geometries in a knife blade

[@lingmui3255]

In theory, ... actually not in theory, this was a really entertaining video!

[@NeevesKnives]

Thanks Ling

[@Keith_the_knife_freak]

What about the lock strength of the dollica ????

[@NeevesKnives]

Nothing can touch the dollica as our video will show in the near future! 😆

[@Keith_the_knife_freak]

@@NeevesKnives 😂😂😂😂👍👍👍👍

[@hamzaadqareen1431]

Very informative and entertaining 🔥👌

[@NeevesKnives]

Thanks we apreciate that we are trying to make these videos as easy to watch as possible

[@jonduncansakurawallknifegarden]

Great point about strength not taking precedent over one handed use. One handed use may be safer and easier for me to use, while I wouldn’t worry about the strength as much. I care more about my chances of needing to close my knife and get my hand back , then worrying about the pressure snapping my lock - but it’s also a good consideration to take into account. Strength of a lock is important, but secondary to one handed open and close. Worst locking system is a friction folder 😂 or double detent lol. My victorinox keeps failing on me 🤷🏻‍♂️🔪👊🏼.

[@NeevesKnives]

Ive broken many knives, ive been in construction my whole life so many knives have failed on me, so I can really relate to wanting a strong reliable lock, but I feel if you have a good knife and know its of decent quality then, if you treat the knife for what its built for, then theres other things that make it the best edc, I pry with some of my hard use knives, but I know its limits

[@chrisgonzales1615]

Great video guys. You know the code for is one of the only Knives that have ever bitten me. And it bit me falling on my finger just like Cara explained. Great knife though. But for a work now if I would still rather a true one hand or even though I can shut it one-handed It’s all about simplicity for me

[@NeevesKnives]

Yeah for sure! When im working I have enough going on! I do apreciate a strong reliable lock, ive broken and failed many, but as long as you have a good knife, and use the right tool for the job then its eas of use that makes it great, I pry with knives but I know what its capabilities are

[@chrisgonzales1615]

Same here brother I probably with mine and do all types of shit as well.Thanks for the videos I really enjoyed this one

[@chrisgonzales1615]

Same here brother I probably with mine and do all types of shit as well.Thanks for the videos I really enjoyed this one

[@maxk5038]

Axis lock for the win!!

[@mickkeim4142]

Great review. I really like the button lock, but there just aren’t that many out there. By the way...where are you to from? I’m detecting an accent but I’m not sure from where...lol.

[@NeevesKnives]

Chicago, we mess around with accents sometimes goofing though

[@mickkeim4142]

Neeves Knives ...LOL.

[@dark_gravity_edc]

Thank you for an intelligent video. They are rare when it comes to locks, blade steel and makers. Very glad I found y'all. Great job!

[@NeevesKnives]

Thank you for that T!! We really apreciate that comment, we are trying to improve with all our videos, we love doing what we do so we put alot of work into it.

[@hagninety4116]

#bang I like how Kara points out how these fit a smaller hand. Wonderfully detailed review. I’ve been considering selling all my liner locks and frame locks and going only lockback. I usually carry a Strider frame lock and thinking of switching to Spyderco Native Lightweight. Thoughts?

[@NeevesKnives]

Imo I really likeframe and liner locks, i also love lockback knives also, but i would rather have more framelocks and linerlocks, button locks exc... Than backlocks that being said i would still always have a couple backlocks atleast. #bang

[@hagninety4116]

Ok I’ll keep my frame lock for now. Thanks guys. #bangbang.

[@nickkuhlmam1336]

i open an close my ad10 one handed like 1000x a day and have yet to cut myself. and I probably have hands not much bigger than hers. that little choil is actually for not a choil for chokings up on the blade. it was made so demko could close the blade onehanded and not cut his missive fingers with his custom ad10.

[@patrickz2565]

Bottom line, just get what you like, and if you break the lock, you should have bought an axe or a fixed blade. I pry with a wonder bar, chop with an axe, and cut with a knife. Always best to use the right tool. Your tools will thank you; and avoiding injury should always be a priority. Great video. Well done. Thanks!

[@NeevesKnives]

Well said Patrick

[@LarryEMorse]

I'm surprised that the CRKT Siezmic hasn't been rated as the strongest. It has a flipper action for ease of opening and a button for ease of closing. The lock is a deadbolt, plus the "thumb studs" are external stop pins which also strengthen it for any prying motion. I just can't see the Cold Steel triad lock beating it. 🤷‍♂️

[@NeevesKnives]

Ya know we forgot about that one and we didnt have it, I would love to know what that knife can do

[@LarryEMorse]

@@NeevesKnives Call me crazy, but I wanted to baton fire wood with a Buck 110. When the back lock failed I was shocked and disappointed. That started a quest for a folding batoner. The first one was a Cold Steel Pocket Bushman. It worked perfectly well, but was so dangerous that I cut the tendon in my left thumb by trying to close it incorrectly. Now that I have a Seismic, I'm satisfied. Why not a fixed blade? Because I want to EDC it and a fixed is not always practical. I like cargo pants so "no problem".

[@LarryEMorse]

@@NeevesKnives Oh yeah, and I do enjoy your reviews very much! 😁👀

[@hyssean12]

@@LarryEMorse get a real cold steel. The pocket buahmad is not a tri ad lock.

[@LarryEMorse]

@@hyssean12 Pocket Bushman locked up like a fixed blade for batoning.

[@Frostbite1090]

What about SNECX Superlock? Just developed recently. Love the channel btw.

[@Frostbite1090]

Its very easy to use and just as strong or stonger by his tests i think.

[@Frostbite1090]

Such an impressive maker and true engineer.

[@Frostbite1090]

Just a couple customs now, but hopefully itll make it to production. But I agree that strength isnt really necessary. In his tests the blade kept snapping before the lock failed.

[@Frostbite1090]

Im fine with titanium framelocks and they're my favorite.

[@NeevesKnives]

Yeah i watched a bunch of tests done, and the blade broke everytime but that was after more weight than i would ever put on a folder or create, I have had locks and blades fail, doing construction my whole life ive done alotta stupid! But usually i have the right tool for the job, if the blade cant pry what im prying i get a prybar

[@garyjacobs2789]

One handed ,easy to open ,easy to close , ambidextrous. I own only one . Answer the mani3 . Cons a liite big for blade length. Thanks kids for your expert opinion.

[@NeevesKnives]

I’ve never tried that one! Maybe we will have to look into it!

[@powerplay4real174]

All those locks can be found on cheap knives except the Tri Ad Lock so that speaks volume about lock integrity and standard.

[@NeevesKnives]

Well thats because theres a pattin on them, and even they have budget knives, you can guarantee when that expires it will be found on cheap knives, but they do have cheap knives also, kind of like the axis lock and how companies all over are using it now

[@powerplay4real174]

@@NeevesKnives I understand what you mean ,but cheap is not something Cold Steel used a Tri Ad Lock on some budget knives like the Tuff Lite but its not cheap or/ poorly made. But cheap is a poorly made and low quality knife to me ,not really reflecting price but build quality, as in Gas Station knives type cheap.

[@NeevesKnives]

@@powerplay4real174 yeah i meant in cost

[@edcknifegentlemen4300]

Do it backwards the lock up use your fan and push blade with palm of hand

[@W49Boowie]

I caught your review a little late, well 3 years late, but not a lot has changed since you shot this GREAT video review (And I have subscribed, 👍), the only lock that is now attracting interest for a MAJOR negative reason is the worst lock of "GSM Cold Steel", the god forsaken, pos, "Atlas" lock, and I have no doubt you'll know exactly why, cos it's a piece of sh*t lock, that should've been it's tag, lol! The ONLY aspect of the Frame lock that you didn't mention is that your thumb has to cross the gap of the slot that the blade goes into when you disengage the Frame lock. If the blade has a smooth quick drop it can potentially cut you across the back of the thumb and this has and does still happen occasionally from comments and info that I have read, it's never happened to me to the best of my knowledge, but it can happen. This can occur with the Liner lock system aswel, but it has been around for decades and I have never read of anyone cutting themselves because of the crossing gap disengagement. I think if you choose the safest design of a LCT Cold Steel Tri-ad lock knife then comparatively it is the best lock on the market as everybody who uses a folding lock knife will already know, but the Cold Steel model of the knife is the most important part of the decision. The Counter Point XL is literally a cigar cutter of a blade design when disengaging and closing, the cigar being replaced by your darn index finger! It's mean AF! I can do it, but it even nips me every once in a while, but I really like the knife, but it sure isn't a "Usual" EDC knife, not unless you're needing a seriously effective weapon everyday! Really great vid, love your style of filming, you're a fantastic duo to watch, you gel so well that it's real cool as a reviewer feels like they're just sitting with you chilling and talking knives!

[@edcknifegentlemen4300]

Crkt tighe tac two got a got button lock

[@NeevesKnives]

Yeah we had that one it works great on that one, we have the griffin loaned out right now

[@TripleEEDC]

The triad lock is great and totally unnecessary, but necessary isn’t the reason to buy a Cold Steel ;)

[@NeevesKnives]

True and i like cold steel alot like alot alot, I love most all knives

[@tankcrowe5417]

You guys do a great job educating the new knife enthusiasts. No knife is idiot proof. So I would like to add, if you see an idiot with a folding knife please take it away from them.....and bitch slap them.

[@NeevesKnives]

Well said!! We like to teach and try to keep the og users entertained at the same time, try!!! 😆

[@johnwest4492]

Neeves, Buck is the oldest: ))

[@NeevesKnives]

Yesir!! And Ive got a special place in my heart for but, my first knife was a buck, i was like 5 or 6

[@johnwest4492]

Me to , nice

[@levim6383]

That's not a knife. This is a knife.

[@NeevesKnives]

😂😂 ok crocodile Dundee !

[@NeevesKnives]

Did you atleast say it in an Australian accent?? 😆

[@levim6383]

@@NeevesKnives of course the c word is like saying brother in Australian.

[@arrowheads46]

Are you picking on 'old timers'? LOL

[@NeevesKnives]

Know not at all, but it does take one to know one 😆 whats up bud? Considering whats out there now they are out dated, that doesnt mean that i dont apreciate a great walk in talk or an old back lock

[@IvanIvanov-vi6qk]

Когато си стиснал здраво нож с линеар или фрейм лок е по вероятно да отслаби а не да подсили механизма...🙂

[@hyssean12]

Lol do you guys have any real world use with these? Liner locks and framelock are both prone to slipping. The lockbar doesn't have to break it just has to slip off of the angled blade tang.

[@NeevesKnives]

Yeah we know over 20 years in construction of every kind, i was born on a job site, I also was saying if the locks were working like there supposed to, frame locks dont slip when you have a hand around the handle Under most conditions, not all but most, Ive snapoed many blades on liner locks

[@hyssean12]

Lol you also say how you think the blade will snap before those mechanisms fail. Well any research would show that only backlocksand tri ad locks the blade will snap before the lock disengages. Watch the blade hq lock video. None snap except the lock backs. Do research first.

[@NeevesKnives]

I was talking from experience and have snapped many blades and had lots of locks fail on me, I have even had button locks blades break, I also did watch a bunch of videos that a guy did in his shop with weights in a professional way, and alot of those videos take out the human which takes out alot of variables, but I was also saying if the knives had good lockup under best conditions to, but i know the triad has the strongest lock

[@hyssean12]

Axis lock. No such thing as an access lock

[@NeevesKnives]

Someones having a bad day