BEST Method to REPAIR a HOLE in LEATHER or VINYL Seats

[@SweetProjectCars]

*****Hello everyone YOU WILL WANT TO watch the entire video it has some good stuff and updates in it***** Here is the promised video on how to mix your paint and silicone so you can fill holes or cuts in your leather or vinyl:) Oh! ya, I almost forgot TGIF what a crazy week. I WANT TO YELL OUT 2 SHOUT OUTS TO: KYLEMLM AND JOE DUPONT for helping us out with some serious PP funding...THANKS, GUYS we love ya!!! Also, Julio is trying to do a hostile take over of the company and channel...he is trying to get the CEO's Job...LOL! I told him he could have it, ROFL!!! All in all, he's a pretty good doobie!

[@heckmancs]

I just got my 99% alcohol and my 303 the other week. Had to replace my wipers on my Cruze so the windshield got cleaned real well and the wipers got 303'd. Also used the alcohol trick to winterize my summer washer fluid. All those tricks are priceless. Glad you've put all your blood, sweat and tears into your trade and giving us your tips and tricks. Definitely glad I subscribed and found your channel. Keep on mak'n it happ'n cap'n. 👍

[@SweetProjectCars]

Hello Chris thank you so much for your very very kind words it really makes it worth it to us when we get comments like yours doing these videos it’s not easy it’s very time-consuming it takes about 12 hours to do just one 5 min video so your comment is much appreciated my friend

[@ricvanwinkle1665]

I’m SMILING all the way to the bank 🏦 cause I now know leather interior repair thanks to you and when I sell my first rebuild I’ll hit you up with a Dona

[@richnunya9547]

I'm going to do my whole boat with this method. Really trusting you with this. Thank you

[@SweetProjectCars]

You are very welcome rich

[@willyck948]

I think this silicone and paint trick will work on my 1960s garden tractor tires id like to refurbish as they have some cracking hope to make them look good as new😉

[@colinuk4509]

Another great video . I don't have leather car seats, but I'm thinking of restoring the saddle for my wooden horse ! 🐴. thanks.

[@SweetProjectCars]

colin uk there you go my friend :)

[@georgef1176]

Another win. Definitely gonna use this in my flip cars! Amazing

[@SweetProjectCars]

Glad you like it George! Thank you for watching, have a fantastic week my friend. mad Mike the hammer SPC

[@Leonardokite]

Hey boss, I was thinking, something I'll try continue to do as long as I'm alive LOL. Anyhow, all these series about repairing your car seats really isn't the end of it, since it also applies to things like boat seats and a lot of one's furniture etc. It has a huge impact beyond cars. Let's call it SWEET project upholstery!

[@SweetProjectCars]

It seems like we get customers coming in for the same thing everybody’s coming in with the interior issues so we like to do videos on the vehicles were working on next will be vehicles that got keyed by ex girlfriends LOL

[@nelsona779]

Thanks for the tip on winterizing Wheels. Learn something new everyday thanks!!!

[@SweetProjectCars]

You’re very welcome and you are one of the very smart ones out there because we always share extra bonus info in most all the videos we do so you picked up a nice little tidbit there it works great and your wheels will look beautiful in the spring

[@nelsona779]

@@SweetProjectCars thanks bro keep doing the good work

[@SweetProjectCars]

Thank you very much we will work hard to keep going and doing great things for great people like yourself my friend

[@Anonymous-it5jw]

In checking the Amazon website this morning, the NH Oil is unavailable and they don't know when or if either the Clear or the Black NH Oils will be available again. How about Fluid Film for corrosion protection? Several of the KZbin mechanics in the snow belt swear by it. Thanks for the additional tips on fixing the leather car seats. Very informative, as are your product listings in the Show More box. Your detailed product listings really set your channel above every other channel I follow. It's really helpful to know which products work, like the 303, and which ones you have decided don't work for you.

[@SweetProjectCars]

They’re selling the tar out of it it is an amazing product they will have a back up on the site Monday if I were you I would definitely wait for it to be available you’ll love it far out exceeds anything fluid film has ever done

[@dna59]

Love the last couple vids on leather seat repair. Thanks for sharing!

[@SweetProjectCars]

Thank you Shane we appreciate that

[@Ruggidscotsman]

Normal silicone sir??

[@willharry6791]

What is the the prep spay? Explain everything you are using, not everyone automatically knows what products you are using.

[@SweetProjectCars]

Will here is what we use amzn.to/2On53dy and as always all of the products and tools that we use in every one of our videos are in the SHOW MORE of the video description thanks and have a great day mad Mike SPC

[@BruceLyeg]

Good job, you just keep plugging away at it! I'm not even remotely hungry but that pig had me drooling a little. Have a great weekend!

[@SweetProjectCars]

Hey Bruce we have a lot more videos to do God willing will get them all in before we take a dirt nap LOL

[@bbsal4031]

Your techniques are amazing. But what about a very major major tear in a seat? Like a big one?

[@SweetProjectCars]

If the material tear matches up and there is minimal gap between the pieces, this will work great. If it's too large, your best bet will be to go to a dealership and get a new seat cover. Thank you for watching and asking, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@randalmorris2076]

No Julio for CEO rhymes even better! LOL

[@SweetProjectCars]

Randal Morris i told him that he was already one vote down lol

[@Sroor90010]

So you are using silicon for plumbing and mix it with spray can dye?

[@SweetProjectCars]

This amzn.to/2DuPmO1 is what we use. Thanks for watching and asking. Have a great week. mad Mike the hammer SPC

[@Tec2Nut]

Once again you guys have it covered a hole in one .

[@SweetProjectCars]

Thank you Martin we truly appreciate that our great Sweet project cars charter member have an awesome night we will see you Sunday

[@praiseHim1962]

Such great videos Mike!! Do you know which color of paint matches Toyota Sequoia taupe/tan?

[@SweetProjectCars]

Watch this kzbin.info/www/bejne/joS3iZyvf5eCb6c it should point you in the right direction my friend. Thank you for watching and asking, we truly appreciate it. Have a great weekend. mad Mike the hammer SPC

[@Adiamtl]

Hi thanks for the tips. If the chair is black and I use black silicon do I need to paint over it again? Thank you

[@SweetProjectCars]

It depends on how picky you are, if you feel that the match isn't good, then you can paint it to get exactly what you want. Thanks for watching and asking. Have a fantastic day. mad Mike the hammer SPC

[@mikeb6418]

Good Morning Mike 2 reasons why I really enjoy your videos and why I’m a long time subscriber. First reason Your videos are so informative and educational for the DIYers You’ve helped me in so many ways with your methods and saved me “Boat Loads” of Money. Second reason Your Nuts!! Love the Jokes, love the Julio thing... and now your showcasing food... LMAO Thanks again Mike. I truly look forward to your videos!!

[@SweetProjectCars]

Big Mike my good friend and Awesome sweet project cars Charter Member, thank you so much...you have been with us for a long time and that is not overlooked by any means...I hope you are doing well and still rockin and clockin my friend!!! have an awesome Thanksgiving holiday :) Mike

[@jleo3051]

Nice work. Perhaps masking tape would help keep the touch up area to a minimum and bring less attention to the repairs. Looks like color matching is fairly difficult. Thanks for the video

[@SweetProjectCars]

Thanks for sharing, sometimes you have to buy a couple different colors to get the exact match you are looking for, but it can be done. Thank you for your comment and for being here with us! Have a great day. mad Mike the hammer SPC

[@bigjim1500]

Will be doing this in the spring...Thanks!

[@SweetProjectCars]

Big gym you will love the results just make sure you watch all three videos in the series my friend

[@bigjim1500]

@@SweetProjectCars I watch all your stuff :) No garage and too cold for painting otherwise I would have done it this weekend.

[@SweetProjectCars]

Big Jim thank you my good friend glad we can help :)

[@NazVick]

Awesome tips. Thanks a lot Mike. Have a wonderful weekend buddy

[@thearrow5793]

Hi there....you always like before...great job and great results and great video and great information and great man .....thank you and have a good weekend 👏👏👏👏👏👏👏👏

[@SweetProjectCars]

You are first no matter what my friend My like it doesn’t count :-) thank you so much have a great

[@keithbeasley5862]

What is the prep spray you said must be applied for this technique to work? Thanks a million!

[@SweetProjectCars]

if you look in the SHOW MORE of the video description you will find all the tools and products my friend

[@prestonrobert2625]

You worked hard for this. See ya later

[@SweetProjectCars]

It’s a good series on helping people with their leather or vinyl that’s for sure thank you for sharing my friend

[@andrewpropes3646]

Awesome advise...thank you for putting these videos together! How exactly would you fix a 3" gash that goes deep into the seat and not at the seam?

[@SweetProjectCars]

If you go to our channel find our email address send me some pictures of this we will see what we can do for you

[@LindaBarham]

Can you use this technique with an actual small tear? If you have styrofoam underneath do you need to put a backing.

[@SweetProjectCars]

Yes you can Linda, fix away! A backing shouldn't be necessary, but if you want to add one that's your choice. Thanks for watching, sorry for the delay in responding, have a great day my friend. mad Mike

[@Nico_335i_DCT]

Nice tip Mike. Have e great weekend!🍗🍺🍺

[@SweetProjectCars]

Nico thank you, Nico, we appreciate that very much!!! mike

[@or6144]

Hi Boss! What if the Sem or any plastic leather prep spray isn't available in our area? Any substitute? Thanks!

[@SweetProjectCars]

what country are you in?

[@or6144]

@@SweetProjectCars Philippines

[@pierretheoret1759]

Thanks for the video, trying this on my boat, how long shoul I wait for the silicone to cure before trying to paint it.... First attempt, I think I didn't wait long enough and silicone got grainy after I ran my finger over it... Let me know... Also... Can I paint seat before I spread the "tinted" silicone? Thanks

[@SweetProjectCars]

Hello Pierre, as long as you use these amzn.to/2AVv11Q & amzn.to/2PWOfN3 or amzn.to/2DJPV7Y you can paint prior to silicone. Dry time depends on the ambient temperature where you are doing the process, it needs to be 70 degrees or higher to dry and usually takes 24 to 48 hrs. Hope this helps, thanks for watching and asking my friend. Have a great day. mad Mike the hammer SPC

[@pixelatedhugs5954]

Does the prep spray say prep spray in the can?

[@SweetProjectCars]

Yes, use either of these amzn.to/2z3oiBu or amzn.to/2AVv11Q depending on your material type. Thanks for watching and asking, have a great day. mad Mike & team

[@ecb713]

Great Job, Great Video !! You do make it look easy. What type & number sand paper are you using?

[@SweetProjectCars]

This is what we used amzn.to/30PDwb9 the reason we didn't show it is because that wasn't our focus in the video. Thanks so much for asking. Have a great day my friend. mad Mike the hammer SPC

[@juniorfilho5220]

Muito bom, Quais materiais o senhor usou pra fazer essa revitalização amigo? ficou show de bola Parabéns professor!!

[@SweetProjectCars]

Gracias Amigo

[@juniorfilho5220]

Quais materiais você usou amigo?

[@Ruggidscotsman]

Super dooper air nozle lol brillian bro

[@matiasdmichael]

Should i use leather prep spray and vynil prep spray i have leather seats on nissan pathfinder 2006 seat color is called caffe latte cant seen to find that color.... going back to the question should i use both leather and vynil prep spray thanks.

[@SweetProjectCars]

If you have leather, use the leather prep spray, you may have to go to the dealership to get the color you are looking for. Hope this helps. Have a great day! mad Mike the hammer SPC

[@matiasdmichael]

Thanks mike you are the man i appreciate all the help you giving us, and replying to our message. As always i get really excited when ever you post new videos, with great content.

[@Mr.Humphrey60]

JULIO your the best Dont burn the pig,, It will SQUEEL on you

[@SweetProjectCars]

Julio read your comment is still laughing

[@Izayuuh1]

Great Video 👍 I have a nickel sized hole on my leather arm rest in 2012 Avalon. Any suggestions? Much appreciate

[@georgemyers6518]

Another great informative video as always. I’m like a sponge soaking up this great knowledge you’re sharing with us. That alcohol you use is a great deal.it costs half per fl oz as ppg dx103. I use the 91% rubbing alcohol in my home brew glass cleaner I use on my own stuff.i gotta try the 99%. I’ll make and upload a video on how I make glass cleaner when my son shows me how to upload,lol ! Keep the videos coming

[@SweetProjectCars]

Thank you George we appreciate that the 99% is night and day between any other alcohol grades out there we have found thank you for sharing have an awesome day

[@jasperfranklin5116]

You videos have been a great help. But I can't get the interior seat paint that you recommended for my Toyota RAV4. Apparently ColorBond LVP doesn't make it. Do you have suggestions? Thanks again for your very helpful videos.

[@SweetProjectCars]

you can try the dealership they have most all the colors for your toyota my friend

[@claudenoto5033]

Great information as always. Question: how would you repair a ventilated seat so that it wouldn't be noticeable?

[@claudenoto5033]

Maybe insert toothpicks in the vent holes after silicone is applied ?

[@SweetProjectCars]

You’re exactly correct my friend that’s how we do it vented seating is a real pain in the you know what but if you have the patience you can do it

[@GordonKWaddell]

Mike, fantastic video! I am restoring my car using all your techniques - just wondering do I need both the leather paint and the SEM classic color or just the one that matches my car? I was able to get my RPO color code however neither product you list seem to have the color for a 2006 Saab? Any suggestions of where I can find the matching color for my seats. My trim color is listed as K02 and the body color is 279 if that helps - thanks!

[@SweetProjectCars]

Hello Gordon as far as the leather paint either one of the companies should have what you need you don’t need both if they don’t have what you need you may have to go to a Saab dealership you can also call the Paint companies that we list and see if they have the color you need thanks Mike

[@GordonKWaddell]

Thanks, I’ll call them tomorrow .

[@CherieWinship]

OK clearly I am not very good at following directions I put my silicone on at the perfect temperature however I failed to use the plastic and leather prep I now have the leather prep Should I remove the silicone I put on or use the plastic and leather prep and place silicone over the top

[@SweetProjectCars]

First, have you watched all 3 videos in the series? If not, it's imperative now that you are in this position that you see all 3 videos. Here they are See the first video in the series: kzbin.info/www/bejne/qKKVnGx-rM-Gprs See the second video in the series: kzbin.info/www/bejne/i6uydad_lq-FmNU Thanks. mad Mike the hammer SPC

[@charlescoker7752]

Just any old silicon want do? Has to be silicon adhesive / glue?

[@SweetProjectCars]

You need to use this amzn.to/2DuPmO1 Please follow the video to a T, there is no other alternative, use the exact same tools, products and method, we've spent years perfecting this process. Thanks for watching and asking, have a great week. mad Mike the hammer SPC

[@scottrussell4488]

Absolutely awesome video. Thanks

[@SweetProjectCars]

RedNeck thank you very much my friend make sure you see all the videos in the series we put out on this have a great night

[@philiphwagner]

I really like your videos. Please keep up the good work!

[@SweetProjectCars]

Thank you Phillip that means a lot to us our good friend we will keep doing the best job we can do for great people like yourself

[@rickrs2006]

So after using the 99% alcohol, plastic and leather prep, permetex, and paint from your list of materials, the paint adheres to the silicone?

[@SweetProjectCars]

Rick RS yes if you follow the video and products to a T and it is best to mix the paint in the silicone before applying

[@silvergrizzly316]

Sweeeeeeeeeeeeet!!!! Julio not CEO, Julio is a good amigo! 😲 I was wondering that same thing Mike, if it could be mixed. 😅 now I know, directly from the Pro!!! 👍👍 Another GREAT video my friend. Have a Blessed weekend Mike. See ya Sunday!!! ☆Jay.

[@SweetProjectCars]

Thanks Jay you have an awesome weekend your self I told him Julio that is that he already has two votes down against him now he’s pouting like a baby LOL

[@WaveAction777]

Always good stuff !!! Is the paint you use just regular paint or is it special paint for this particular purpose?

[@SweetProjectCars]

WaveAction777 the products we use are in the "SHOW MORE" of the video description if you look here photos.app.goo.gl/nGB3PohwzrJ9hirh8 for a desktop computer or here photos.app.goo.gl/dY6Wz16qnroYHDsK6 for a cell phone you will find all the tools and products my friend :)

[@WaveAction777]

@@SweetProjectCars Thank-you.

[@SweetProjectCars]

WaveAction777 you are very welcome my friend :) mike

[@glenncalzada1707]

Would this process work to repair a clean, straight 3 inch slash? I watched this video because I thought you were going to use that knife for a real cut, not a scrape.

[@SweetProjectCars]

Yes that will work on any cut or tear or hole after you do the repair let it dry well then you can spray paint it it will be slippery and smooth as glass

[@PodQueen2]

Hi, guys! I started this project when I hoped it was cool enough and the temps ended up climbing to 67. I tried putting the silicone in the fridge for just a bit to lower the temp but it was honestly a tacky mess. What do you suggest I do from here? The passenger seat is okay as I did it earlier, but the driver's seat, will likely look like crap. Only great news is that it's black and hides things very well. The temps should be under 60 tomorrow. Oh yeah, I'm also running out of time because I have a car show next weekend. Hahahaha!!! Thanks so much!!

[@SweetProjectCars]

Lincoln Mark VIII Addicts may i ask why you put the glue in the fridge? as it makes it very hard to spread it needs to be at room temp or higher my friend. also what glue are you using?

[@PodQueen2]

@@SweetProjectCars Room temp was making it super tacky. You said in the video that the temps needed to be 65 or lower to spread and then above 65 to cure. And Pernatex Adhesive Silicone.

[@PodQueen2]

@@SweetProjectCars Also, it's still quite tacky this morning and about 48 degrees. Any way to salvage the situation with a heat gun? Thanks!

[@SweetProjectCars]

Lincoln Mark VIII Addicts you have to place it on and spread it immediately it takes an initial set pretty quickly also did you mix a little bit of color with the silicone as shown in the video? that works great not too much and that will keep it from being tacky

[@SweetProjectCars]

if you mixed to much color in it will stay tacky...now you can start over and just wipe what you have placed on and do it again or try spraying a small area with your color that usually will take out any tackiness if it does then you are ready to paint

[@kevinorians6772]

All my silicone peeled right off the very first time we sat. Followed all the sprays. Does the kind of paint you mix in matter? I had used the same vinyl spray for the seat as I did with mixing the silicone

[@SweetProjectCars]

You need to use enamel based paints, no latex and you need to make sure you use this amzn.to/2z3oiBu first and then make sure you are letting it dry long enough, depending on your location, it needs to dry at least 4 days. Also, make sure you are using this amzn.to/2DuPmO1 to mix with the paint. Hope this helps Kevin, thanks for watching and asking. mad Mike the hammer SPC

[@tracystaley7241]

I am doing vinyl boat seats and am using the marine vinyl boat paint that doesn't require this particular prep spray. It uses the vinyl prep. Will this silicone and paint stay on my seats?. They are cracked, no holes

[@tracystaley7241]

SEM brand

[@frankziccarelli1724]

Interesting piece of info! Hey, where was Julio today? Not very visible for a guy who wants to be the SPC CEO! That porker looks mighty fine too! Thanks for another sweeeeeet tip! See you Sunday for the luau!

[@SweetProjectCars]

Thank you Frank we appreciate that Julio was quite shy someday he’ll come out in public I told him you can’t be CEO and hide behind the camera LOL

[@juannavarro3343]

What is the prep spray that you're using?

[@EatMoreDeer]

Thank you for the awesome videos! Can you apply leather dye instead of paint over the silicone? Also can/should you use the leather prep after the silicone cures before painting or dyeing?

[@SweetProjectCars]

First off, you cannot dye, it is meant to be absorbed and silicone doesn't allow it to be absorbed. Second, you always use the prep spray prior to painting after the silicone cures. Sorry for our delay in responding, hope this helps. Thank you for watching and asking. mad Mike the hammer SPC

[@evanalex7575]

@Sweet Project Cars hello, hope you're well, what prep spray are you talking about? Thanks and love the video!

[@imad1208]

Hello, was wondering if you could do a video on removing tire tracks from leather or would it be pretty similar to the steps you took in this video?

[@SweetProjectCars]

imad1208 we have 3 videos in the seat repair series and they will help you take care of the tire track issues

[@kenthartland8581]

Tire tracks on seats? Sounds like that weekend back in 1970 with Turbo, Sammy, Mad Mick and those girls from West Towne. Oh, wait. You weren't there. ;^)

[@MrDongster]

Can you repair heated and cooled seats (Lexus vent. seats)?

[@SweetProjectCars]

Dorian Quezada you can but just before the silicone is dry you stick round tooth picks in the holes...very tedious job I will say that

[@petraaubrey9392]

Do you have a video with a larger hole?

[@SweetProjectCars]

We have several videos on repairing holes Petra, check them out. Thank you for the view, have a fantastic day. mad Mike the hammer SPC

[@lavattedavid3115]

I ordered Agelus brand leather paint, can I still use this method with that brand of paint?

[@SweetProjectCars]

Hello Lavatte, our videos are very product/tool specific. To obtain the same results we show, you need to use the exact products and tools we use. Thank you for watching, we truly appreciate it. Hope you have a great weekend. mad Mike the hammer SPC

[@lavattedavid3115]

@@SweetProjectCars Thank you! i will send back what I have and order what is recommended!

[@DRATproductions1]

Hello to you and LOVE your videos... Maybe I missed it but what paint do you use?

[@SweetProjectCars]

All those products and tools are in the show more of the video description thank you for asking

[@sweetrichomes9048]

Aunque no se inglés y no me entero de nada me gustan mucho sus vídeos. Un saludo

[@SweetProjectCars]

Luciano Mendoza muchas gracias mi amigo lo apreciamos....julio cesar chavez

[@sweetrichomes9048]

@@SweetProjectCars julio César chavez?

[@SweetProjectCars]

He is one of our workers

[@sweetrichomes9048]

@@SweetProjectCars Ah vale, pensaba que decías el boxeador y no lo entendía 😅 jajaja. Saludos ✌

[@SweetProjectCars]

Luciano Mendoza no hay problema mi buen amigo :)

[@Ed-pv6ke]

Can you share the 99%, prep spray and silicone used?

[@SweetProjectCars]

Ed all the tools and products are in the show more of the videos description if you cannot find this area let us know we will help you out thanks Mike sweet project cars

[@SizzlingSawman]

Can you mix regular latex paint or does it have to be the spray paint?

[@SweetProjectCars]

You can use any oil or lacquer based paint will work. Hope this helps Greg. Thank you for watching and asking my friend. Have a great day. mad Mike the hammer SPC

[@fatknucklesproductions7517]

Is there a special thread, pattern or anything like that to repair a tear at the seam?

[@SweetProjectCars]

Fat Knuckles Productions we use this kit amzn.to/2DtWsBw to fixt threads that have come lose

[@Toefurkey]

Can you use silicone to repair heated seats as well?

[@SweetProjectCars]

The silicone we share in the tools last yes you can

[@briandubbeld5665]

Nothing but awesomeness amazing stuff thanks for your videos on car detailing how too 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👍👍👏👏👏👏👏👏👏👏👏👏

[@SweetProjectCars]

Thank you Brian we truly appreciate that my friend

[@BillSW]

what is the prep spray u used so i can buy it?

[@SweetProjectCars]

Either of these amzn.to/2z3oiBu or amzn.to/2AVv11Q depending on your material, and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@paigejennings5818]

What if it’s a big whole to where you can see the stuffing in it would this still work??

[@SweetProjectCars]

Yes, but you will need to find something to put a patch in and stuff the patch up underneath the existing material, then follow the video process. Thanks for the question, have a great day. mad Mike the hammer SPC

[@MA-yg7ft]

Question, will this fix a hole along the stitched seam? As in the stitching is completely tore apart.

[@SweetProjectCars]

M Ano you can try it if the separation is not to bad

[@MA-yg7ft]

@@SweetProjectCars Its bad, I can put fingers under the leather, and where the stitching holds the leather together is ripped.

[@SweetProjectCars]

M A well it sounds like you have nothing to lose by trying it my friend

[@MA-yg7ft]

@@SweetProjectCars True, but on the bright side the rest of seats can still be saved thanks to you.

[@rainmeya1]

Just 1 question could this procedure be done on the steering wheel as well?

[@SweetProjectCars]

JJ Rogers you can try it or you can do this video kzbin.info/www/bejne/jJqnk6uiYp5mjZY

[@RalphZenitram]

Just sweeeeet!!! As always

[@SweetProjectCars]

Thank you Oscar we appreciate that our good friend have a great night

[@shawnmarsbar]

How long does this take to cure?

[@pixelatedhugs5954]

Also, I just need to repair the hole so I can use a nicer printed vinyl to cover it.

[@SweetProjectCars]

This process will work perfectly for that! Thanks for the view, hope you have a great week and all the best on your project my friend. mad Mike & team

[@RonConsumer]

Awesome job and video thanks for covering the oh shit, I put too much paint as well or what one would use the FAQ of what if... Keep those cool and great tips coming... 👍👍👍👍

[@SweetProjectCars]

Thank you Ron we appreciate that our good friend we will keep rockin and clock in

[@joescott9999]

What are you using for prep spray??

[@SweetProjectCars]

Joe Scott if you look in the SHOW MORE of the video's description you will find all the tools and products

[@thetraindriver01]

Great stuff mike thanks 👍👍👍

[@justinroop5554]

What is the prep spray?

[@SweetProjectCars]

Either of these Leather Prep Spray amzn.to/2z3oiBu Vinyl Prep Spray amzn.to/2AVv11Q depending on which material you are repairing. Thanks. mad Mike the hammer SPC

[@Chuck-gj9sh]

Ok so I have a hole in my car leather seat all I need is silicone and the right color to match my color seats ? Would that work

[@SweetProjectCars]

Carlos Diaz if you watch all of these videos in the series #1kzbin.info/www/bejne/qKKVnGx-rM-Gprs #2 kzbin.info/www/bejne/i6uydad_lq-FmNU #3 kzbin.info/www/bejne/jGmbaJaZo7dli68 you will know exactly how to do it and know which exact right parts and tools we use. Remember our videos are tool and product-specific meaning you need to use what we use "exactly" to get the same results.

[@mattblack5410]

Does anyone know if you can mix the SEM color cost with silicone successfully? It's different than regular spray paint.

[@SweetProjectCars]

Hello Matt, use either of these amzn.to/2PWOfN3 or amzn.to/2DJPV7Y and watch this for the method kzbin.info/www/bejne/iaGZeXqJiLZ6js0 Thanks for watching and asking, have a great day. mad Mike the hammer SPC

[@fredcdobbs823]

Did you texturize with your thumb & the kit texture patch as in the other videos?

[@SweetProjectCars]

Fred C Dobbs it all depends on what video you are doing, the silicone video we use our thumb to knock down the slight ridges and with this video, kzbin.info/www/bejne/nnTTp4CMaNCoY80 we use the patches

[@heidisacksteder3329]

Where is your list of materials? What type of paint do I use?

[@SweetProjectCars]

Heidi, all of the tools/products we use in our videos are always found in the SHOW MORE of the videos description. Thanks for asking. Have a great day. mad Mike the hammer SPC

[@FOURWHEELTRENDS]

What is the biggest tear or hole that can be repaired vs replaced? I am about to do a new build and would like to give this a try.

[@SweetProjectCars]

This method is really for smaller punchers and cuts or tears no longer than an inch or two most of the time if the seat is in shredded and bad condition it is best to replace the seat cover

[@FOURWHEELTRENDS]

Thanks. That's what I was thinking. I had my last Jeep repaired and it did not last very long. Looking forward to finding an extra seat to test this out on. Looks great.

[@SweetProjectCars]

My Jeep and Me thank you and you are very welcome just make sure you see all 3 videos in the series before you attempt this my friend :)

[@FOURWHEELTRENDS]

Sweet Project Cars - I have watched each one at least 2 times. What a great idea.

[@SweetProjectCars]

Thank you my friend we truly hope they help you if you take on the task just take your time mixing the color with the silicone then applying works the very very best then it dries you put your last three coats of paint on

[@hollyyanofsky1747]

What is the prep spray

[@SweetProjectCars]

It's either of these based on the material you are repairing holly amzn.to/2z3oiBu or amzn.to/2AVv11Q and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@alonzoduran3442]

Quick question, what is NHO?

[@SweetProjectCars]

Alonzo Duran this is it here goo.gl/RJa6KC ty mike

[@justinrobert6573]

I was honestly afraid to use the Silicon because it says "Not paintable" on the back. I just laid my first layer! Wish me luck.

[@SweetProjectCars]

Justin Slawek make sure you see all 3 videos in the series the best way is to mix a little color with the glue then apply

[@justinrobert6573]

@@SweetProjectCarsThank you for the reply! I have watched them all several times. They have helped tremendously. I will post a video of my conversion soon! I am waiting for the silicon to dry currently. The other seat does not need repair so it will be sprayed today!

[@justinrobert6573]

@@SweetProjectCars Painted the headrests. Still a little scared about painting over the silicon. I guess if it does not work, I can sand it off. It's been 24 hours and it is still a bit tacky. How long do you wait after painting to use 303? These seats were very dry from the start. Thanks again! Sorry for all of the questions!

[@SweetProjectCars]

Justin this is the video that works the best kzbin.info/www/bejne/jGmbaJaZo7dli68 when you mix just a tad of paint with the glue also if it stays tacky just place a mist of color over it and let it dry it will no longer be tacky. but again mixing a bit of the color with the glue works great. this procedure does take a bit of patience and skill but you will get it

[@diannabickford5671]

Where do u buy the silicone?

[@SweetProjectCars]

It's this amzn.to/2DuPmO1 Thanks for watching Dianna, have a great week. mad Mike

[@jeanettecordoway368]

I’m trying to repair my pontoon boat seats. I did all the steps but I didn’t sand it smooth enough. I already applied silicone and it dried so uneven. How can I start over? :(

[@SweetProjectCars]

you would just go over it with new permatex and lay it on smooth make sure you do it when it is cool out as it sets up pretty fast

[@ericasantana4191]

What is the prep spray? Where can I get it?

[@SweetProjectCars]

Here it is amzn.to/2z3oiBu Thanks for asking, have a great day. mad Mike the hammer SPC

[@dodd1295]

What type of silicone can u use ?

[@SweetProjectCars]

knuckles dodd the products we use are in the "SHOW MORE" of the video description if you look here photos.app.goo.gl/nGB3PohwzrJ9hirh8 for a desktopcomputer or here photos.app.goo.gl/dY6Wz16qnroYHDsK6 for a cell phone you will find all the tools and products my friend :)

[@ginaberquist9553]

what is the prep spay?

[@SweetProjectCars]

It's either of these amzn.to/2z3oiBu or amzn.to/2AVv11Q depending on your material Gina. Thank you for watching and asking, have a great day my friend. mad Mike the hammer SPC

[@tonybelisle423]

I think that be a cool HOODIE and tee shirt hooleo

[@kenswitzer4133]

What type silicone do you use?

[@SweetProjectCars]

ken all the tools are in the SHOW MORE of the videos description but here it is amzn.to/2DuPmO1

[@markhenry4178]

Great videos!!

[@kevinhintz1903]

I think what bothers me about this repair is the Permatex silicone glue says it cant be painted? Explain , please?

[@SweetProjectCars]

Well Kevin if you watch all three videos in the series you’ll see how we paint it and make it stick and last for years we have done this for close to 15 years with no issues whatsoever there are three videos in the series hope this helps thanks Mike sweet project cars

[@JoseRamirez-yh2ll]

Can you plz do a "how to take off water spots off the paint"?

[@troydillon1466]

Distilled white vinegar

[@JoseRamirez-yh2ll]

@@troydillon1466 I'll give it a try. Thanks for the tip

[@SweetProjectCars]

Thank you troy for helping out that’s what our channels all about

[@SweetProjectCars]

Jose Ramirez see this kzbin.info/www/bejne/nnOnaqiLaL2WiLs

[@treasureman1198]

Does it work on vinyl

[@SweetProjectCars]

Yes it does, hence the title of the video :) Thank you for watching and asking. Have a great day. mad Mike the hammer SPC

[@DIY-Sy]

I tried this, but I still could not get the paint to stick to the silicone. After the paint dries, it still comes off when I rub at it.

[@SweetProjectCars]

Do this video right here kzbin.info/www/bejne/iaGZeXqJiLZ6js0 mix it, spread it, let it dry then paint it my friend. Thank you for watching and asking. Have a great day. mad Mike the hammer SPC

[@Leonardokite]

Go Julio!!!!!!!!!!!!!!

[@ScotWalt858]

Awesome! Thanks for another great tip. Pig out!! :)

[@SweetProjectCars]

Thank you Scott our great Sweet project cars charter member thank you for stopping bye Julio can cook up a mean Piglet that’s for sure