BEST MOD for Ford 6.7 Powerstroke That Could Save You Thousands! S&S Diesel CP4 Bypass Kit

[@methanol141b9]

Thanks again Wade for you and your team taking the time to post yet another how to video. I know these videos take a lot of time to create, edit and post. I will be performing this upgrade asap. Appreciate you!

[@thoroughbreddiesel]

Our pleasure! You're welcome!

[@G.I.JeffsWorkbench]

Great overview Wade. Definitely a must have, practical mod to every Powerstroke. In addition to the printer instructions, I also found S & S’s KZbin install vid. It’s 1 & 1/2 hours, so even slow learners like me should be able to install the kit.

[@thoroughbreddiesel]

Glad it was helpful!

[@LWRC]

You would think in 2022, that the designers and manufacturer of the CP4 pump would have solved the CP4 failure already!!!

[@ARCSSelfDefense]

You would think.....

[@LocoSOB]

How is Ford supposed to make money if they fix that problem?

[@lParohlx]

@@LWRC people still buy the truck at a premium price and then their motor-craft department keeps selling injectors and pumps making tons of money they love it why fix it

[@LWRC]

@@lParohlx What do they say about a FOOL AND HIS MONEY??!!! We landed men on the moon back in 1969 and yet in 2024, we can't solve a simple high pressure pump problem??!! Either Ford has incapable engineers or they're sandbagging and doing this on purpose!

[@michaelbenoit248]

Just installed the Gen 2 kit on a 2019 F550, & from doing the kit the instructions are taken directly out of the Ford IDP service manual for removing the 2 intakes. The hardest part of the whole kit was the 1 but under the high pressure fuel line for the fuel filter cup. Took 30 min to get it out. If you are doing this job go watch the S&S video because they explain in depth better where it all hooks up. I was confused, & the video helped a lot.

[@thoroughbreddiesel]

Glad it worked out!

[@johnmills8760]

I installed this kit on my truck. It was very noisy so I contacted S&S through email. They told me it was normal and to check my hoses that that could be causing some of the noise. After driving a few days for work I got a major fuel leak. I had the truck towed to a local diesel shop. Ended up being my driveshaft seal in my cp4 was leaking. I had the shop check over my work and they installed a new cp4 and it blew out the driveshaft seal on it as well. We then took the S&S kit off and put on another pump and now everything is fine. I contacted S&S again they asked what seal in the cP4 and if I have a aftermarket lift pump. I have an air dog lift pump. After responding I got no response from them. Did I miss something are you not supposed to install these with aftermarket lift pump. I’m out a lot of money after putting this kit on did I miss the warning not to use if you have an aftermarket lift pump?

[@thoroughbreddiesel]

Aftermarket lift pump shouldn’t have effected this. S&S does a great job in responding to this so it may be wise to call them directly. If you need any assistance give us a call as well. 866 737 4966

[@gratefultrucker7781]

I don't think the after market lift pump would matter unless your lift pressure was way to high.

[@NewOldSchool]

This should come on all stock.

[@G.I.JeffsWorkbench]

Yep, charge me more for the truck up front, instead of continuing to use a system that’s prone to failure. Reminds me of the aluminum wheels w/ steel valve stem corrosion issue. Waiting to see the outcome of the class action lawsuit, hoping to get proper replacement wheels on my dually.

[@joelcurtis1151]

If you already purchased your kit prior to the upgrade it’s going to cost you around 60+ dollars for the new filter housing + shipping , so around 80 bucks when it’s all said and done, and did you notice no o r said anything about the fact that one of the selling points and benefits of the previous kit was that you could see the fuel in the clear plastic filter housing

[@thoroughbreddiesel]

We said that in our previous video with the clear filter.

[@jamesmcintire3800]

Sounds like I need this on my ‘14

[@SUBI_PaT]

Wade for president another Stella video nicely done sir let’s do a poll wade for president you got my vote maybe diesel will be cheaper 😂😂😂😂😂 nice job wade seriously awesome stuff.

[@bellcats02]

Awesome job on the video

[@thoroughbreddiesel]

Thanks!

[@ericnadir503]

Have one of thease dpk on every one of my 6.7 no brainer!

[@dv7431]

Got mine today super fast shipping thank you

[@thoroughbreddiesel]

Good to hear!

[@tekshield]

Does that Donaldson Filter rust when water get's in it? I am asking because I have seen other videos that show those metal filters rust and then will send rust back through the system.

[@thoroughbreddiesel]

The fuel passes through two filters before getting to the high pressure system so we haven’t had any instances of that.

[@rickeyketchum6671]

I’ve got the spe one on my 2016 do you think I would be better to trade it out for the S&s gen 2.1

[@Rabbitslayer257]

Im wondering the same thing lol

[@marksr1907]

I have the previous generation - can it be upgraded? Perhaps the filter body and filter? Any offerings on an "upgrade kit"?

[@thoroughbreddiesel]

www.thoroughbreddiesel.com/cp4-67f-bp-g21-fhu/

[@thoroughbreddiesel]

www.thoroughbreddiesel.com/cp4-67f-bp-g21-rfa/

[@vincetosto233]

Checked the Donaldson filter is only a 9 micron filter. Was wondering if you guys tried any other filters? Saw Wix has a 1 micron filter with matching threads/size, haven’t gotten my hands on one yet to check.

[@rvadventures]

I can't stand Donaldson filters,they have terrible customer service and cheap built filters that are over priced.

[@goldtooth10]

Whats the part number of that Wix? Lets see how the filtration efficiency numbers compare to the Donaldson filter, then we will know if it is suitable.

[@TexasHarleyBoy65]

Excellent explanation!

[@thoroughbreddiesel]

Glad it was helpful!

[@samb198055]

It's filters so well!!! It turn my red fuel clear!!! Just kidding 😂

[@thoroughbreddiesel]

💀

[@handyvan3422]

shhhhh

[@MarsellusWallace2024]

What do you guys think of me adding a Dorman glass in line filter before this filter so I can see through to look for pieces of metal? If the pump is ruined but the shavings are being filtered, I need to replace the pump as soon as possible. A glass in line filter would let me check for particles. Can anyone think of a problem with doing this? Right now I still have the last model Racor style filter and I like that the fuel is visible.

[@thoroughbreddiesel]

We don’t suggest adding another restriction in the system, also return fuel temperatures need to be taken into consideration too. Change the filter regularly and cut the filter open looking for shavings.

[@FRZNTYM1]

Will S&S Guarantee this DPK will prevent my fuel system from having a catastrophic failure?

[@thoroughbreddiesel]

No. But this product will protect your fuel system in the event that happens.

[@justinperry2392]

Jeez i have Freightliners and i dont understand why the baby trucks are always having issues? 2023 and the fuel system isnt figured out...

[@md1120]

With the new Donaldson filter you don't get a clear bowl to see the filtered junk, correct?

[@aversings7338]

Correct

[@vincemccarty8787]

Will this void ford warranty?

[@antoniodeperez1]

When is best time to install at what miles or let finish warranty I have 2020 f250

[@thoroughbreddiesel]

Earlier the better! S&S makes no claim that this product will not void your warranty, but it will save you a ton of money if the cp4 fails.

[@MarsellusWallace2024]

Do it right now. Worst that can happen is you replace a CP4 instead of your entire fuel system. If neither cost you money, they’ll CERTAINLY cost you time.

[@diablokicks1]

With this revised kit (I have gen 2) you lose the ability to see if there are metal shavings in the return line. The alternative is to cut the filter open?

[@thoroughbreddiesel]

Correct. To monitor just cut the filter open. The plastic previous model was much more expensive to change and wasn’t as reliable. This is a little more hassle but a MUCH better setup.

[@jakethesk8roberts763]

So does just running additive fuel every fill up not good enough? My cp4 was replaced before I bought my truck the first owner replaced at 75k now do they put the same dumb pump back in when they do that I don’t know if mine was upgraded or not

[@jakethesk8roberts763]

I have 156k on it now 2014 f250

[@JmF250]

The pump doesn't get upgraded, the kit separates the fuel going to the injectors from the fuel lubing the pump. If you don't have a big filter on the driver's side firewall, you don't have the kit.

[@thoroughbreddiesel]

Fuel additive is a good start, but not a complete answer to the design flaws of the CP4. Purchase this kit for protection!

[@jakethesk8roberts763]

@@thoroughbreddiesel how easy is it to install pretty easy or would I need to take it In?

[@thoroughbreddiesel]

It should take about 2.5 hours and it has a 'medium' difficulty level, but this is relevant to your experience. Here's an install video: kzbin.info/www/bejne/n3yUh6F9oppkpLc

[@briancissell7737]

Where can you buy the filter on this kit?

[@thoroughbreddiesel]

Give us a call: 859-737-4966

[@chrishappysofar2090]

This filter system looks and sounds like the low pressure side returning to the tank and not from the pump to the injectors

[@F450FTW]

The failure happens on the low side, not the high pressure side.

[@bris9984]

I notice 2 or 3 small metal shavings when I change my bottom fuel filter is that normal or I have to get this kit?

[@thoroughbreddiesel]

If you find shavings, needs to be diagnosed as a failure. The bypass kit wont help here.

[@bris9984]

@@thoroughbreddiesel What need to be done to fix it?

[@thoroughbreddiesel]

Bring it to a mechanic for a diagnosis.

[@videtosk]

Why not just use a Fuel Lubricant additive?

[@TaurenJam]

that's what i read, cp4 failure is due to low level lubricity coming from the diesel itself.

[@thoroughbreddiesel]

The fuel additive, although a good idea to increase lubricity and cetane, doesn’t correct the design flaw of the CP4.

[@videtosk]

It seems that the design flaw is in the design of the US diesel. No lubricity. I’m not hearing of many failures in Europe.

[@Farmer_1776]

Hello Gelding Diesel!

[@thoroughbreddiesel]

Good day to you plant fairy!

[@landcobuilderslandcobuilde4484]

How much is this kit and where can it be bought?

[@thoroughbreddiesel]

www.thoroughbreddiesel.com/cp4-67f-bp-g21/

[@landcobuilderslandcobuilde4484]

Another question. Do you need a lift pump to add this? If the CP4 is bypassed then how does it pump fuel? Forgive my ignorance as I am no mechanic. I had my last truck which was a Chevy deleted which had a lift pump and I would like to add one to the Ford I just bought. Do I need a programmer to add a lift pump?

[@jorrick66]

@@landcobuilderslandcobuilde4484 ford has a factory lift pump

[@floydwilliams3321]

Very cool wade

[@143cowgirl]

What is the micron size of you filter?

[@Uncle_Fester24]

9 microns is what the filter spec says.

[@korn111685]

The most important part of the title is “could”. Think about that people.

[@mikelewallen5917]

How much

[@thoroughbreddiesel]

www.thoroughbreddiesel.com/cp4-67f-bp-g21/

[@joshuagalchutt3483]

Just curious if this would void the factory warranty if I installed it. Pretty sure I'm not wanting to deal with this bastard grenading .

[@thoroughbreddiesel]

We have not heard of any dealerships denying warranty with this installed, but we cant speak for what some dealerships will do. If its in question, remove the kit before taking for warranty service.

[@camionero02]

I have water in fuel

[@thoroughbreddiesel]

If you WIF light is on, change filters, drain tank, and be conscious of what water could cause in the fuel system.

[@dixiemae5042]

I thought adding a Cummins was the best mod for AnY ford owner

[@carlosmedrano3549]

I know a lot of people who are and where ram owners that are know ford owners

[@dixiemae5042]

@@carlosmedrano3549 so they did all did a Cummins swap as well … good for them 👍🏻👍🏻

[@JmF250]

The Cummins is great, the rest of the truck is a dumpster fire👎

[@handyvan3422]

i was gonna swap a cummins in once i blew mines up, that way i can run filtered waste oil

[@shanetaylor7581]

@@dixiemae5042 hey you dropped your transmission back there🍻

[@lewisbolman7862]

I just seen another video that states at +30,000 psi this little filter screen isn't stopping metal from getting in??? Now I have seen many of you telling me this is the cats pajamas, but are you all getting paid to tell us this???

[@thoroughbreddiesel]

Where is that video?

[@lewisbolman7862]

@@thoroughbreddiesel I have been looking on utube for hours , it is a white dude in front of a large red tool box with a lockable work top. I didn't click on it I guess cause it doesn't show up in previous viewed. I will keep looking .

[@lewisbolman7862]

Ok it is " Ford 6.7L power stroke fuel system failure | everything you need to know, and about the disaster prevention kit is at 17:50. The site is flying wrenches.

[@lewisbolman7862]

Now I can stop looking ! Hours sir, hours.

[@jacobsheets6860]

@lewis bolman what’s your consensus? I’ve been studying too because I’ve picked up a 2018 with 90k miles. I have seen tons of trucks that have gone 250k+ with literally nothing done but basic maintenance. Truck still has CPO warranty too so I’m not too rushed at the moment.

[@jimbobxcityguy5338]

It's all snake oil. I've had many 6.7's since 2011. Many miles All kinds of stations bought fuel from. Had DEF in tank a few times. Never an issue.

[@thoroughbreddiesel]

I'll never understand the thought process of " it hasn't happened to me so it can't be true".

[@JmF250]

While failures happen a lot less than the internet leads you to believe, they still happen. I've known 3 people to grenade their CP4. For $400 and 4 hours of my time, this kit is well worth the peace of mind for me.

[@zachwalker5085]

You should make a kit to upgrade gen 1 kits to add the new filter @thoroughbreddiesel

[@thoroughbreddiesel]

Good idea!

[@joshuaziegler1]

@@thoroughbreddiesel I have the 2011 6.7 and I did the 1st gen kit that had me cut the fuel line. A kit that includes the new fuel line that was previously cut would be nice. I've seen them for sell around $200. I'm sure with a bulk purchase S&S could get a much better price.