BEST Oil Change Tips for BMW Owners!

Changing the oil in your BMW is one of the most important things to keep your engine healthy. Being able to do it yourself will save you a ton of money, and sometimes it's just fun to open the hood and get your hands dirty. In this video, I share some tips that I've learned from 4 years worth of oil changes on my E90 BMW 330xi.
Oil I use: amzn.to/2DZ3BY6 (6.8qts are required)
Mann Oil Filter: geni.us/HC3M
Oil filter wrench: amzn.to/2GKxMUL
Torque wrench: amzn.to/2EdXx0U
E90 BMW CURRENT MODS bit.ly/2IuTn5B
MUST-HAVE CAR TOOLS bit.ly/3bw0tE5
CAR CLEANING SUPPLIES bit.ly/2IznIQk
CAMERA GEAR I USE bit.ly/2tXyI6A
#BMW #E90 #Maintenance
Instagram @justinbuice

[@jeffreymarkpeterson]

The dipstick was hilarious! I had to rewind to see what was going on...lol

[@justinbuice]

:D

[@gearhed79]

I was half paying attention at that point and was like, wait, what? LOL. Good one!

[@donis4221]

Lmao when he said that I knew right away 🤣

[@LuisGuzman-tz3tv]

I had to rewind too lol!

[@MathGeekQ]

for like two seconds i thought "oh cool, i guess the the 330i's do have one..." lol can't believe i fell for it

[@markbeavers7155]

You need to torque the filter cap. 18 ft lbs., same as the drain plug. Starting point and new o-ring can change the end position. Your blue dot may not line up when properly torqued. Also, Mann filters make the BMW filter. They just put a BMW stamp on the end. As far as oil, I prefer Liqui-Moly Special Tech 5-W30. I live in the south, so you would want to use a weight oil for the colder weather in your area. As long as your oil meets the LL-01 standard BMW recommends, you should be good.

[@wysiwyg2489]

You should loose the filter, do not remove it, before draining the oil. This will make the draining much faster, as there is no vacuum created by the oil leaving the engine.

[@kevinp6025]

Another good thing to always do is to prime the oil filter. I pour about a quarter of a quart into the oil filter before I install it. Might seem small, but it doesn't add any mess, and it prevents the engine from any extra wear saturating the filter might cause.

[@drivethru1835]

Tip / Hack I do for my oil change :: Right before you screw the Oil Filter Cap back on, I pour like 2 seconds worth of good oil in the main tank and let it drain back out. This kinda reassures me that no old black oil is being mixed in with my good oil and you can see how clean it looks underneath coming back out.

[@mikey358976]

Old school mechanic here, I have a 2007 twin turbo 335i , I use casto synthetic, but lately I been using liqid Moly. And yes I can notice a difference performance, quite smooth, when driving. And the longevity in the oil as well.

[@amfareed30]

Which type and grade of liqui moly do you use?

[@mikey358976]

@@amfareed30 0W-40 liquid Molly, if you can't get that then 5W-40 is ok. If not liquid Molly the Castrol or Moblil one is pretty good. As for the oil filter I recommend Man oil filter.

[@alexprime118]

Great video, my 325i oil change tips: 1.open engine oil cap and filter cap before drain your oil, gives you better flow 2. suck oil residual in the oil filter housing, allow more clean oil in the system

[@jakepillow8513]

Justin you are such a genuine nice guy and an invaluable member to the BMW community.

[@diamondmaddox5]

Amazing... I was considering purchasing a BMW, but I was afraid about the maintenance... however you're making me feel more confidant about it !

[@justinbuice]

It's not too bad. You do what you can at home, and then you will have money saved when you need to take it in.

[@thepincushionman7063]

Plenty of really good bmw repair channels on KZbin. You can find anything you need. And I look around for the best quality part for the best price. Cheap parts normally suck!

[@alvojnikovic2171]

Diamond Maddox I own a 5 series. Love it. I was worried at first but it’s not as intimidating as I thought it would be. Just like any other car but fancy

[@johnsaldana6898]

Go for it baby,All you have to do is buy some special tools and you can do your own tune ups,oil changes,brakes,and coil and fuel injector replacement.Believe me, if you buy a bimmer,you'll never even look at a Detroit Special ever again.I have been driving BMW since I was seventeen so I know. As far as parts there's Beck&Arnley,Bosch,and Bremi.You do not have to get oe parts as they're pretty pricey.Best wishes.

[@gregorytowers9106]

When you drive one you just can't go back to anything below it, . Good luck on your search and purchase remember low miles ,.. peace 🤔😎🍷

[@MMR35429]

I had to watch 5:04 about 10 times because I knew damn good in well there was no dip stick and trying to look at if you were really grabbing one or not. Then realized you were only pretending. Thanks for the brain fart👍

[@itsjokes]

Yh same lol

[@lipentsao1146]

lol he has got us all, I even have a E92

[@justinbuice]

:D

[@salih3112allstar]

I saw that too

[@tonykersh5888]

Michael Mahas lol

[@noroy2]

I use quaker state 5w30 full synthetic on my ‘08 335i. It’s pretty hot here in the summer, triple digit temperatures. Greetings from Mexico 🇲🇽.

[@BMWHOBO]

Liqui Moly Molygen 5w40 in my n54. LL01 approved and reacts to uv light to help easily spot leaks.

[@martynh5410]

How does it react to uv light?

[@BMWHOBO]

It's floresent green.

[@justinbuice]

I'll have to check that out. that would be helpful

[@nahtannoJv8]

same here. it costs more but worth it.

[@naderg2]

Can you use NOT aproved LL01 castrol gtx magnatec in 209 x5 n52 engine?

[@tommyk2958]

I've been owning bimmers for years and I think it's time to get my hands dirty to work on some simple maintenance. Thanks for the tips.

[@davisdegarbo]

I caught the dip stick joke instantly! LOL. I use Liqui Moli SAE 5W-40 full synthetic. I noticed that my E90 330i oil level would drop slightly every 10,000 or 15,000 km which I understand is normal. A bottle of Liqui Moli motor oil saver changed that entirely. Thanks for another great video.

[@gtechsolutions6039]

Have you had any issues since you started using LiquiMoly 5w40?

[@carboumen7661]

Mann filter....the best !!!. I'm always use mann filter in my audi A4 B7. Saludos from Spain

[@SuperManny2126]

Nice vid! You got me with the dip stick 😅

[@sp1tf1r321]

Just did the oil on my e46, I always stick with Castrol and a Mann filter. And u got me going with that dipstick lmao.

[@justinbuice]

:D

[@brooksautry2266]

Very true... Loyalty for motor oil brands can run deep. I have family members who have used the same brand for 20 plus years.

[@bigsur175]

I use valvoline 20w50 racing and Bosch oil filter but of course I got an E30 with the M20 engine

[@donmiller4004]

Just want to say thank you for the video, I now feel way more comfortable about changing my own oil on the beemer! Good video!!!!

[@tskichannel2302]

Liqui Moly 2332 Leichtlauf High Tech 5W-40 is excellent. It meets BMW approval and Merc approval. First hand I can attest that in my 07 Merc AMG 63 when I used Mobil 1 Formula M 5W40 I would have clatter on start up and ticking from the lifters if the car sat over 3 days. With Liqui Moly Leichtlauf 5W40 clatter on start up is gone and it stays in the lifters over a week...rarely do I have ticking. Good stuff and good in both my E90 and F30 BMWs.

[@randalanderson1861]

The mechanic I use needed to change the oil in my 325i. He used Liquid Moly 5-30. I used Mobil 1 0-40 euro blend but, not anymore. The car got about a 100 extra miles per tank with the thinner oil. My next change I'm using a good synthetic 5-30. Color me convinced.

[@BMWFanatic]

Great tips! Same ones I always do 😀 Liqui-moly 0w-40 got winter and then Liqui-moly 5w-40 for summer here 👍🏻

[@ericvlasov1815]

Got LM LEICHTLAUF HIGH TECH 5W40 myself for summer. Hope it's good.

[@karlpietrzak4467]

BMW Fanatic Can liquid moly be used in place of KY jelly

[@E.charles.whitee]

I been using castrol edge 0w-40. I've been considering to switch to liqui moly but don't know if I should keep using 0w-40 or change it 5w-30. I read somewhere that's what some swapped too

[@JackRR15]

But why. Might aswel; just keep 0w-40 all year long no?

[@Motorsportsgeek]

just stick to 0w40 all year long, changing the type of oil every 2 oil changes main have negative affects to the engine since it never gets use to a specific weight if you keep changing it, no to mention seals dont like that either.

[@sasorinet1]

I've been using Pennzoil since I had my 328i an still using Pennzoil on my 335xi! Seems to run great with it! I also had to replay the part about checking the oil level with the dip stick like 10x's 😂😂 Great video too! Love them! 😃

[@mdgf79]

That dipstick was crystal clear , love it

[@williamplace1205]

I worked for Pennzoil for over 15 years, first as Regional Technical Service Manager based in Oil City, PA, then at the Regional Headquarters in Pittsburgh, PA. I was promoted to National Technical Manager at the Houston, TX HQ. I then went on to be the Product Manager for Pennzoil’s heavy duty (diesel) engine oils. Bottom line - I can tell you with absolute certainty that Pennzoil is the best oil, backed up dynamometer testing as well as field testing. I know because I know the data.

[@MahmoodSuhail]

Always 0w40 mobil1 regardless of season as it thickens or thins according to temp. I tried Castrol before a couple of times, it makes the valve lifters clicking on idle speed and also level goes down between changes but with mobil1 never

[@joeacosta2290]

Mahmoud Masad mobile one has always been good for my bmw

[@almirlimaj4354]

@@joeacosta2290 I've been using Mobil 1 as well.

[@drew6134]

Good video. Liqui Moly Longtime 5w-30 year round every 7500 miles. 2011 528i / N52 engine.

[@jerseyneil1]

I use full synthetic Walmart brand motor oil. Between my wife and kids, I have 6 cars at home and I've been using Walmart oil for years without any issues. A 5 quart bottle runs about $17. It meets the same API oil standards as all the major oil brands, just read the label on the bottle. I've tried all the major brands before, Mobil 1, Castrol, Valvolive etc. Never thought any of them were better.

[@mook9210]

5-30 super tech synthetic is all I run too .15.99 a jug .can't beat it.

[@MrAgustincuenca]

I just go with the 5w30 oem BMW bottles, but mine is an N54 instead of an N52 like yours. I always go with the BMW branded bottles, so I'm always sure it's manufacturer approved and when it comes to price, it really is not more expensive than the other good brands like castrol, mobil, liqui moly, etc....so it doesn't hurt either the car and the wallet.

[@KillerMc58]

What about resetting the intervals on the BC? Whould be really helpfull if you made a video about that. Nice work keep it up👍🏻👍🏻

[@curtisengel7707]

I find Castrol just tastes better.

[@justinbuice]

same lol

[@stazzyjayy7346]

Curtis Engel 🤣🤣

[@jorgenvonstrangle000]

Mobil 1 cured my blinkers

[@motorradingaround1220]

They currently offer pumpkin spice castrol trans fluid I can’t stop buying It

[@joshmindek4840]

I use Castrol 0w40 since it returns great used oil analysis results and is BMW long life LL-01 certified. If I couldn't find that for some reason I'd use Pennzoil Platinum Euro 0w40, also an excellent oil. Always use the MANN filter also.

[@sebastiantevel898]

For my N55 engine: for winter BMW oil which is Shell Helix or Pennzoil Euro Platinum 0w30, 0w40. All these 3 oils are the same oil produced by Shell under different brands name. If you do a lot of city driving sitting at the traffic lights or crawling bumper to bumper for length of time, is better to use the 40 viscosity grade. Then for summer Pennzoil Euro Platinum (again a Shell rebranded oil). They got all the best approvals from BMW, Mercedes, Porsche, Audi and Ferrari. Or Liqui Moly 0w40 and 5w40.

[@markz3295]

Thanks man i been seen your vids since i got a 09 bmw 328i xdrive you help alot

[@himah1453]

Your explanation is very clear and very simple. Keep up the good work buddy

[@justinbuice]

Glad I could help!

[@himah1453]

@@justinbuice I'm having trouble finding the fuses location of all the cigarettes charger spots I replaced the fuse of the cigarette charger the one between the cup holders and it's working now but the armrest and the behind the armrest and the one under the box and the trunk they're all not working and my BMW is 2011 535i if you can help me I appreciate that buddy

[@bilalahmed2123]

I love it, when new oil is poured into the engine. I personally like Liqui-Moly or Motul oil.

[@htspeed8832]

One tip is to pour the first quart or so of oil into the filter housing before putting the filter in. This prevents any possibility of the low oil warning coming on when you start it up.

[@jutperry]

Thanks for the video. Especially appreciate the acknowledgment of health effects with oil exposure. 🙏

[@andrewskears6169]

I use liqui moly 5w30 full synthetic. its what we used at this bmw specialty shop I worked at, along with mann filters.

[@JAMAEL89]

Finally someone found the dip stick. See me a lot of time looking for it. Keep up the great work.

[@justinbuice]

Thanks!

[@jensonchandra]

I switched to Pennzoil Platinum Euro SAE 5W-40 for my F30. Pennzoil is now the recommended choice by BMW.

[@budburr66]

Tasteful music done properly! And, if Castrol 0W-50 is good enough for BMW lubrication engineers, it's damn sure good enough for me.

[@miguelc9358]

Used the mobile 1 high mileage for e90 only because autzone deal. Comes with funnel and plastic oil pan to drain the oil into for $5 more. Will try the Castrol one you used possibly next time.

[@danielhall6767]

I learned something important that I did not previously know from this video. Thank You😁

[@enbardis]

You can also put some oil on the gaskets and washer when you put them in and it gives you a great seal.

[@jgripen969]

5w-40 Castrol Edge in my 540. HUGE difference between Castrol Magnatec and Edge. Edge lasted much longer and the engine barely burns any oil when using Edge (Magnatec burned, a lot)

[@jerrypavelka6949]

Shell has been chosen by BMW as their only recommended global supplier for aftermarket engine oils. Their previous supplier was Castrol. I've been told by a BMW mechanic that Pennzoil is the maker of Shell oils.

[@praneetsingh6201]

You have been doing oil changes on your car for years, you know what your doing keep it up 👍 and choice of oil your using seems to be working great

[@justinbuice]

It gets easier every time!

[@christianfayb4]

I also lub up the filter with oil after I've reinstalled the drain plug. then proceed to fill the engine back up with oil. Makes it so on a cold start the oil filter housing already has frsh new oil

[@blackwaterdogs4256]

As to that oil leak you had....I bet you a dollar that you had the O-ring in the wrong spot on the oil filter housing....if it`s all the way up top, you will get a leak. It has to be down in that second groove in the housing to seal properly (look @ 3:20 on your video). I use Mann filters too, also the same Castrol synthetic, changed every 7500 miles.

[@miguelc9358]

You can just pour the oil with a funnel when done into the 6quart oil bottle sold at the autoshop +1more quart that is needed to make sure you're good on a 2006 325i 6cyl (e90). No need to take your container with you. Just drop it off and go 👍

[@romancemorrison8045]

I just got my first 06 bmw 325i. And you been a big help. Keep up the videos bmws are life.

[@darrylmay1205]

Thanks man. I own 3 BMWs. Never new filter wrenches existed. One is on the way now!

[@Florian1095]

I like to use Mobil 1 ESP 0W40 in my BMW 120d. Read a lot of good stuff on it and also it's always one of the best oils in objective oil analysis. But since Mobil 1 doesn't offer a 5W40 LL04 that I personally like based on laboratory tests I might switch to the Motul x-clean 5W40 soon. My dad likes Castrol better, so I always put Castrol Oil in my dad's E90 and it also runs just fine.

[@TrollingVeteranGamer]

You are right I used a K&N filter, had to open filter for other maintanance only after few hundred miles. I noticed the slits in the filter were forced open.

[@micomitrovic3980]

Good choice in motoroil. One of the best oil brands in the in the world

[@O_M_i_B]

MOBILE 1 💪🏼

[@kenphillips5801]

Hey bro good video.. I have a 2003 BMW e46 330ci with approximately 223,000 miles on it and i use Pennzoil Full Synthetic 5w30 along with Lucas Full Synthetic oil stabilizer. I switched from Vavoline and since I switched it doesn't use any oil in between oil changes. Before it used a quarter in between. I go 5,000 miles on oil changes... I enjoy your videos keep them coming

[@nickoaks5143]

I am using Pennzoil Platinum Euro L 5W-30. I read a link where BMW changed their recommended oil manufacturer to Pennzoil a while back, and as I am a new BMW owner (2010 BMW 328i sport pkg) I thought I might go along with their recommendation. Here is the link I am referring to www.bmwblog.com/2015/05/12/pennzoil-is-now-the-recommended-oil-for-bmw-engines/. BTW, I laughed out loud when you checked your dipstick. Love your videos man.

[@anilpatel4916]

Hi Justin, its hard to get Castrol now because BMW is recommending Penzoll oil now, i am going to use Liqui Moli which is a oil made in Germany and is a High quality oil based on some of the reviews i have read.

[@johnjohansson7073]

Great video as always! The oil I'm using is: Lukoil Genesis Special C3 5W-40.

[@MonsterNewfie]

Use BMW LL01 spec oil. Mobil One or Penzoil Platinum brand oil. I Chang the oil every 7,000 miles. The N54 has vanos sensors, when they get dirty the car goes into limp mode. To avoid limp mode increase the oil change interval.

[@mr.edwardishiyama1992]

I recommend you bizol green 5w40 or motul 8100 x-cess both motor oils are so good one Made in France and the other Made in Germany and meets the LL-01 specification for BMW I used both on my 2010 X3 and I have no problems 👍🏽

[@dfitzwm]

This is perfect timing. I'm doing mine tomorrow for the first time at home and I've already watched the other videos and this is gonna help so much. Keep it up ! Great video man!!

[@justinbuice]

Glad I could help!

[@taaayboytaaay3976]

Dude could you do a video on changing blinker fluid. Literally just ran out and I’m going crazy 😂great channel man just recently bought a 2009 bmw 3 series and your videos have literally helped me so much

[@titotato9275]

Thank you for the important information. I have such a car and I am following you with all the steps that you take

[@Tony-nl6pf]

How do you know if the oil needs to be changed? It only shows oil level.

[@jonahklinar3420]

I'm a dealer mechanic in a northern state. Any engine newer than 2015 we use 5w30, any 4 cylinder after 2015 or b series uses 5w20. 5w30 is still used for n55 and n63s.

[@mixification]

Did this today on my e90 with a coolant change as well. My e90 must've wanted it's oil changed because as soon as I opened the filter housing cap it decided to leak EVERYWHERE that was a fun clean up job...

[@justinbuice]

That happened to me once when I took the filter cap off before draining the oil. It was a big mess

[@ArtemDzhadzha]

I use Motul 8100 X-cess 5w-40 in my 335xi. Will switch to Red Line 5w-30 in the future, it's ester-based oil.

[@marloneatstreet]

Dip stick move looked real AF!!

[@ShiftedPerspective]

Something about fresh oil

[@justinbuice]

Always tastes so good!

[@carlosenriquez1080]

Yes theres just something about new oil lol... I'm always watching oil videos

[@jgripen969]

Mmmmm oil....

[@MatiasInfinito108]

I always use Mobil One 0-40w. Definitely recommend it.

[@titotato9275]

I want to ask you about electricity, glass, windows not working on the remote control, what is the malfunction and what should I do? I do not trust the stakeholders, but I trust you and do everything you say. I hope to answer my question

[@motofranz1]

I thought you car had speckled paint at first...it eas just dirty ! Thanks for the OC tips !!

[@jyotindrapatel893]

one suggestion when you pour oil from bottle keep opening on upside that let oil come out easily without spilling. so you hold bottle exactly opposite way opening on upside and handle and otherbody down side

[@mathieuskinner9339]

Great video. I use Bosch or Mann filters myself. Both good brands. When it comes to oil I'll use GM Dexos 2. Meets the LL4 specs and works perfect for me.

[@pedrogonzalez9943]

The best way of knowing how well the oil is working in the engine is to do oil analysis at every oil change. The report tells you metal contaminants, fuel dilution, life of the oil in terms of base number, and other oxidation reference values. If the base number is too high, you are changing the oil too soon. If it is too low, you are using the oil for too long. You find the sweet spot of oil change as the engine starts to get older in mileage. For example: I know my Acura MDX 3.7L engine took about 70K miles to fully break-in. My 528i 2.0L engine took about 55K miles to fully break in. Another great piece of information is the MDX optimal oil change interval is not set at 10K miles. In the BMW, I am still working out that information. With the information I have on hand at 62K miles, looks like the optimal interval is going to be around 8K miles.

[@GaynNovi]

I only use amsoil full synthetic in all my vehicles, and a K&N oil filter. I see so many people buy good oil then cheap out on the filter.

[@ajsstuff193]

I use 0W-30 Castrol EDGE with titanium technology, basically the most recommended oil for my car in the uk 🏴󠁧󠁢󠁷󠁬󠁳󠁿 BMW 320D M-Sport

[@Kheeralall1]

Love the way your videos flow and just have a different vibe from others. Great job and continue the videos!

[@justinbuice]

Thank you!!

[@MrEpicRaul]

I use on my BMW mobil 1 5w40 oil and I noticed the difference well when I turn the engine on when it's cold, oil a bit expensive but if it's worth it!

[@chowder55199]

Best tip is to do it yourself and not the dealership 😂

[@justinbuice]

True!

[@martynh5410]

And definitely don’t take to a “quick change” oil place! Step son did that and well basically they “lost” that center part on the oil filter cap. They put it all back together and didn’t tell him. After two weeks of hearing a nasty loud whining like noise, I finally suggested that we re-do the oil change ourselves. Found that the cap had been damaged, ordered a genuine OEM part and replaced the filter they had used with a Mann and put Castrol Edge 0W40 in it. Runs great now!

[@chowder55199]

Martyn H that also for sure! I don’t trust any of those shops!

[@bg-se7rq]

GTACentral best ur mechanic buddy who get hookup on at cost oils 💯🏃‍♂️

[@jportrait1100]

Martyn H i took mine to jiffy lube & they forgot to put oil back in it. I drove a few blocks before the engine shut down. They tried to deny it but finally ended up replacing the engine, car was never the same tho

[@tomasbaer9070]

Great video like always, btw I use Mobil 1 05-30, never had any problems and the engine runs really smooth. Also I the same brand of oil filter Mann ! Keep up the good work !

[@AirIndy1]

Hey Justin, Im a big fan bro. I recently got my 07 328xi back in april and my exhaust is pushing white smoke out after about 7k miles. I changed the spark plugs, ignition coils, valve cover gasket (with everything that it also includes), harmonic balancer. Anywho... my coolant level looks stabilized, so im not thinking of it being head gasket, but I do think it might be the piston rings..... ive been doing a lot of research lately, ima go ahead and switch to 5w-40 to see if the issue is resolved cause my oil levels are always being depleted. Currently experiencing rough idles, random shut off that occured one time during transit, and not enough power, with check engine service light on. I tried an engine restore, and its cold out so its hard to see if theres a blue tint, but its white white as far as I can tell. You got any advice on what I can do to perhaps seal these rings/restore with an additive?, i dont think i wanna get into the mess of opening up the engine. Love you guy.

[@FriedChickenBlowout]

Thanks for the tip on the Mann Filters

[@boom3863]

Subbed as a new bimmer owner. Thanks for the information

[@romgar200]

I just had one oil change done since I bought my car. I got Pentosin High Performance 5w40 I believe, and Mann filter from FCP Euro.

[@volundrfrey896]

I always use castrol edge, it's what bmw recommends for my e60 and the prices are so similar that I don't see a reason to "cheap out".

[@tomwomack3167]

I did not notice the model of your car, but I drive an M5 and M6 -- both V10s -- with a slightly different procedure. The oil filter rides on the passenger side near the oil cooler. I use Ravenol 10W60, a G.group V oil.

[@Nikolasto77]

Pennzoil Ultra Platinum - only oil made from natural gas, not crude oil. Cleans much better and is more resistant to breakdown at extreme temps.

[@scottfisher788]

Always enjoy your video’s. Ready to try an oil change on my e90

[@stevecariggillio4139]

Mann oil filter is a MUST

[@E46G0D]

Liqui Moly 5W-30 along with the Liqui Moly Ceratec additive, it's as German as it gets! 👌🏽

[@Metalodeath]

I use super tech oil full senthetic it works well I know it's probably not the best but I'm broke and it's what I can afford plus it has great reviews online too! I save a lot of money doing my own oil!

[@enzopianelli6081]

Pennzoil (Shell) Ultimate Platinum 5W/30. BMW switched to recommending this oil recently over the Castrol. Good video as usual Justin !!!

[@CaptainFabulous84]

This is what I use, Pennzoil Platinum Euro L 5W/30. About $7/quart at Walmart.

[@justinbuice]

Thanks!

[@bg-se7rq]

Enzo Pianelli bmw uses moly in their race cars tho 🤔 ... I love me some shell gas 93v tho 🏃‍♂️

[@bg-se7rq]

CaptainFabulous84 eww

[@Swampster70]

The reason Mann filters fit so well is that they are one of the main suppliers for BMW. A BMW filter is a Mann filter with a different name on the ring around the end.

[@firebladeflow]

3:40 really, really important: give the seals a touch of oil,otherwise they wont seal properly, also this way you wont damage the seals while reinstalling .

[@nimz2009]

Liqui moly only !! Can’t cheap out on the oil that’s why