BEST PRESSURE WASHER UPGRADES! MAKES IT SUPER EASY TO USE

MAKE YOUR PRESSURE WASHER 10X EASIER TO USE. These pressure washer mods will make your life easy. Time to ditch the OEM pressure washer hose and replace it with a high quality pressure washer hose and quick disconnect fittings. If you are using a stock pressure washer hose, gun without quick disconnects you are missing out. Start with a entry level pressure washer pump and add on high end accessories (Gun, Hose and Foam Cannon) and you will greatly improve your user experience. Thanks for watching and subscribing if you did.
My Favorite Pressure Washer Videos • Pressure Washer
Here is a list to everything I used in the video.
FULL PARTS LIST AND LINKS ON MY WEBSITE: www.hawaiideta...
Active 2.0 bit.ly/44iTsk2 or amzn.to/47HkJ2z
M22-14 Stainless Male Plug bit.ly/3n6Eyek
M22-14 Stainless Quick Disconnect (female) bit.ly/47B0rb5
High End 50' Pressure Washer Hose W/QD's and Male Plug bit.ly/3skTIly
Entry Level Good Quality 50' Hose amzn.to/3QH7Ob3
Pressure Washer Gun High End bit.ly/3GYsi7G
Pressure Washer Gun Mid Grade bit.ly/3YDQci9
Pressure Washer Gun Entry Level amzn.to/45lBFuc
40 Degree Rubber Protected Tip bit.ly/44jfZgN
40 Degree Unprotected Tip bit.ly/45AhW9K
My Fav Foam Cannon MJJC www.mjjc.com/c... or amzn.to/47H8i79 or
My 2nd Fav Foam Cannon MTM bit.ly/3OHzWZ1 or amzn.to/44hBHla
Cheapo But Usable Foam Cannon $12 amzn.to/3P20dSX
Garden Hose Quick Disconnect Female bit.ly/45Axvyg
Garden Hose Quick Disconnect Male bit.ly/3KMg7hL
Garden Hose Quick Disconnect Set of 3 amzn.to/47Diopq
Slightly Lower Quality Quick Disconnect Kits
Full Stainless Steel Quick Disconnect Kit amzn.to/3E0AxQD
Full Brass Quick Disconnect Kit amzn.to/47Bh0Ui
If you want an awesome wall mounted setup check this out
MY WALL MOUNTED PRESSURE WASHER • CUSTOM PRESSURE WASHER...
MY VACUUM • CUSTOM WALL MOUNTED GA...
Check out my website for all of my favorite car detailing products, Tools, deeper explanations and links to purchase. Thank you for supporting the HAWAII DETAILING channel. www.hawaiideta...
MY FAVORITE DETAILING PRODUCTS
Exterior Wash • HOW TO WASH YOUR CAR L...
Wash Buckets bit.ly/3S5EcCn
Foam Cannon Direct from the manufacturer www.mjjc.com/c... Amazon amzn.to/3trSd1M
Foam Cannon Shampoo amzn.to/3vzD1Co
Bucket Shampoo bit.ly/3xdyaEY
Wash mitts bit.ly/31vF8Kr or amzn.to/3hAk3Dp
Grit Guards bit.ly/3pjM3he
Drying Towel bit.ly/3KjVEyp
Drying Aid bit.ly/326xQNo or amzn.to/3sDAXaG
Drying Aid Towel bit.ly/33tnOH6
WHEELS • CLEAN WHEELS LIKE A PR...
Wheel Cleaner Light Cleaning bit.ly/3FVDgch or Heavy amzn.to/3pD6I1v
Tire brush bit.ly/32EddG6
Wheel Face Brush amzn.to/3HLuheF
Boars Hair Brush amzn.to/3MmEr9i
Barrel Brush bit.ly/3eRNezE
Wheel Microfiber Towels amzn.to/3CbZDtS
Tire Dressing amzn.to/3vBiI7s
Tire Semi Permanent Dressing amzn.to/3Mx7w1Y
INTERIOR • HOW TO CLEAN YOUR CAR ...
Interior Cleaner bit.ly/3xOxOEE
Detail Brush bit.ly/3oDjv3Y
Interior Microfiber Towels bit.ly/3EIGobR
Vacuum a.co/2T1VK91
Vacuum reel bit.ly/3hAluSb
Drill Brush amzn.to/3MjmkB3
Cordless Drill bit.ly/3Q8roth
Shop Vac Extractor a.co/gmxlphJ • CONVERT A SHOP VAC TO ...
Extractor Bissell a.co/ikv2XTA • BISSELL SPOTCLEAN PRO ...
GLASS
Glass cleaner bit.ly/3IGVKzv
Glass Microfiber Towels bit.ly/3hpOviH or amzn.to/35NaT3M
GARAGE ACCESSORIES a.co/7jFjrWQ
MY FAVORITE AMAZON PRODUCTS www.amazon.com...
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiitesladetailing
TIKTOK / hawaiidetailing
PLAYLISTS
PRESSURE WASHER • Pressure Washer
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
GRILL • Grill Videos
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.
#hawaiidetailing #pressurewasher

[@DMCnME]

Learning the over under method of coiling a hose/cable changed my life 😂 Years of struggling. No more.

[@HawaiiDetailing]

Yeah. You have to roll it up nice to get it to unroll nice. Thanks for watching

[@daveorourke8447]

Yes, game changer

[@markfrye9178]

I like it too. I learned it from watching "This Old House."

[@archiepezek]

Great video as usual Jeremy with the much-appreciated humor thrown in.

[@HawaiiDetailing]

Glad you enjoyed it

[@mag1vl]

Hello Jeremy from Australia 🙃 I went for the UBERFLEX™ Kink Resistant Pressure Washer Hose 1/4" x 50' 3,100 PSI with (2) 22MM by Pro Pulse ( still made in USA) and I have the quick connect for the water and the stubby gun, just have to wait till the 19/09/23 for it to arrive😉 I notice that the OG hose is made by Gates and I know they make lots of top quality rubber products..

[@HawaiiDetailing]

Hello. You will be happy to get a good hose on there. The OG hose is nice. The Uber will do you well though. Thanks for watching

[@steev182]

Yep. Always do a quick spray to the side after swapping tips. I didn’t when I swapped from my foam cannon to tip, it wasn’t on right, so it flew up like a little mortar shell. Landed right on my windshield. I didn’t notice the crack until later.

[@HawaiiDetailing]

Bummer.

[@mikehittner]

Just watched this full video......AND......I see no arguments,,,😂😂😂 great content again Jeremey!!

[@HawaiiDetailing]

Glad you enjoyed it. Thanks.

[@nomad509]

I opted for the Gray KobraJet hose because of supply chain issues during covid and used it twice. Since then OG introduced the newer inhouse hose that I plan on upgrading at some point in the future along with the Active 2.0. The Mosmatic OG gun is freaking epic!

[@HawaiiDetailing]

The kobrajet is a great hose. The short gun is the best out there. Thanks for watching the channel.

[@gzhen123]

Perfect timing. I was just browsing for the QD for hoses and debating on these. Now I’m confident what to buy

[@HawaiiDetailing]

They are worth it for sure.

[@davidmorgan2964]

Much appreciated video - I’m just setting up my new system - this really helps!

[@simcptmike]

I watch all your videos and found your channel 2 years ago. I hit like on every video. Love your personality and your content!!

[@HawaiiDetailing]

Thanks a lot. I really appreciate it.

[@Ethan-wi1oy]

dude your looking amazing! good on you for taking your health as seriously as you do

[@HawaiiDetailing]

Thank you. I appreciate it

[@WaxedUpAutoDetailing]

Looking fit Jeremy! Great vid as always too!

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Been trying to take care of myself.

[@jlc2324]

You now have another new subscriber! I was searching KZbin for videos on pressure washers because I’d like to have one for some car cleaning and other around the house stuff like cleaning the driveway and sidewalk to name a few. After watching this video, I need that foam wash in my life! I went and watched a few other videos on your channel and then I just had to subscribe. The content and how you present it is great. I returned to this video and clicked on a few of the links you provided in the description to get a general price list going for myself. When I’m ready to purchase, I will do so from your links to help you out in a small way. I will be watching more of your past videos over the next few days to catch up. OH! And thanks to one of you other videos, I will also be insulation my garage door! The summers here’s in Arizona can turn a garage into a three digit sweat box by 10am! It never crossed my mind to insulate the inside of the garage panels. Thank you!

[@HawaiiDetailing]

Thank you. I appreciate it. I like the foam cannon too. The garage insulation was a big help here. The sun beats on the door half the day. Was so hot I could not even touch it. Now its nice and cool and the ac can keep up easily. Thanks for watching

[@Spirited282]

Appreciated that you point out which quick connects for what purpose and such as i always wonder which to get, haha

[@HawaiiDetailing]

Thanks for watching

[@wescat2]

I have all the upgrades in the video, but I'd have to say quick disconnects is by far my favorite. If you can't afford all the upgrades at once I'd go quick disconnects, then short gun, then hose, and foam cannon last. How do you feel Jeremy?

[@HawaiiDetailing]

I agree. That’s a good order to work your way up. Thanks for sharing.

[@TripleGAutoDetailing]

Never gets old Jeremy!! Great stuff!! Aloha 🏝

[@HawaiiDetailing]

Thanks. I appreciate it

[@neilwalker5041]

Great advice and all of those OG products are built to last a long time. The thicker hoses also bring up added pressure when using the foam cannon. Thank you for a fun video!

[@HawaiiDetailing]

Thanks for watching and sharing

[@ArnageInFL]

Using a thicker hose doesn’t give you more added pressure. You get more pressure going with a thinner hose like a 1/4” instead of a 3/8”

[@marshprofessionaldetailing9794]

Thank you for the update Jeremy! I've used the Meguiar's and Wet Coat in my shop. Both are great.

[@HawaiiDetailing]

Yeah I agree. I like them both also. Thanks for watching

[@alexpope5327]

Good stuff. I bought the quick disconnect kit and love it for the pressure hose and the supply hose too. Makes setup and break down a ton easier. I do have the feather weight hose. Has worked good so far. Hoping it stays that way.

[@HawaiiDetailing]

Thanks. you should get some good life out of it. Thanks for watching

[@hectoroswaldogonzalezpelay2493]

Hi, I am following from Mexico, i like the content of channel.

[@HawaiiDetailing]

Awesome, thank you!

[@albadridahl6710]

Mina-san, kite daikemasu. Ralph Buncho desu!!

[@matthewhutchison7123]

Keep the great videos coming buddy!

[@HawaiiDetailing]

Thanks! Will do!

[@koreywilliams4570]

Hose reel is my next upgrade for sure. I got a new flexzilla style hose and it's great but it's also a pain to put away.

[@HawaiiDetailing]

The hose reel is a great upgrade. It makes using it way better. Thanks for watching

[@beerme_2]

Enjoyed the video.. I'm all set up although I like to keep looking for anything new.. I have been thinking about you hoping all is ok with the news of the fire.. Stay Safe!

[@HawaiiDetailing]

Thanks for asking. I appreciate it. I am all good here.

[@jlb3675]

Jeremy great to see another video. I did get the OG hose and the OG quick disconnects. I love the mosmatic short gun too. I don't have the MJJC though and might just have to get myself a Christmas present this year.

[@HawaiiDetailing]

Thanks. I like them too. Yeah give the MJJC a try some day. It’s a good one.

[@ArnageInFL]

Same here. I think qd’s save a lot of time. Have never had any issues regardless if they were brass or ss. People shouldn’t get too caught up on “high quality” fittings and what not. Just a waste of money as they all work and do the same thing. Same goes for pw tips. I mean if you’re worried about banging the tip on a vehicles paint then you probably shouldn’t be trusted to work on cars in the first place.

[@HawaiiDetailing]

Thanks for sharing your thoughts. I do like the rubber tip a lot but its not a no go item.

[@martindurham7513]

Great info! Love your channel, your videos are top notch. Question: how do you remove that “white wax residue” on your black trim? I know I should have not got it on there to begin with 😢. I can cover for awhile with some dressing, but it comes back. Any tips would be greatly appreciated.

[@josephrottina1901]

Great video brother. What’s your favorite brand iron remover? 👍🏻🇺🇸🇺🇸

[@murtaghslawncare.]

Great video Can those hoses and quick connects suit a high pressure system of say 4,000 psi and 4 gpm?

[@jacksonsdrones]

You got any tips for Pressure Washer Noise Reduction! 😅 All in All, Awesome Video Man! I am gonna add these upgrades as soon as possible!

[@HawaiiDetailing]

Get a longer pressure washer hose

[@razatheninja]

Great content! Where did you get the two lightning bolt ⚡️ neon signs? I see no wires attached and it looks really cool

[@lloydalmeida7699]

Thanks for a useful detailed video 😊

[@HawaiiDetailing]

Glad it was helpful!

[@WESMAN381381]

Jeremy with the fresh cut! ✂️

[@HawaiiDetailing]

Hahaha. I cut it down.

[@LCculater]

Can you do a review on a Worx 1800 psi portable pressure washer as I bought one and absolutely love it ! Have all your upgrades on her and wow this thing puts out ! Wash my RAM TRX pick up and Lexus LC 500 coupe and wow !! I think you might give it a baaaaaam at the end 😂 ? Have 1.2 mm orifice installed as well

[@HawaiiDetailing]

Great to hear. Glad you have a good kit put together. Thanks

[@CAPTJ696]

Jeremy glad to see you pal. Hope all is well.then again you already did.

[@HawaiiDetailing]

Thanks for watching

[@vtxdaryl]

How do you figure out which hose goes to which disconnect fittings. The fittings look the same to me but I don’t think I could remember which way to connect the hoses. I’m sure it would burn up the compressor if you do connect the hoses backwards.

[@HawaiiDetailing]

Check this out. This shows exactly the way these are set up. www.hawaiidetailing.com/portable-pressurewasher

[@KDR195]

What orifice size do you recommend for the foam cannon and also the nozzles for active 2.0? Thanks in advance!

[@Motsdetailing]

I need to get some quick disconnects for my setup

[@HawaiiDetailing]

They are a great add on.

[@timmatsumura9940]

Great info Jeremy! Off the subject have you ever tried the suds factory water spot remover for glass and paint? Wondering if it really works that easily.

[@HawaiiDetailing]

I have not tried it. Will have to look at it in the future

[@MensGroomingAdvice]

Great video. I've got the quick connects and short handle trigger which is awesome. I'd love to have on of the longer, higher quality hoses but can't seem to find one that will connect to my Karcher (I'm just a weekend enthusiast).

[@HawaiiDetailing]

The setup that I showed will connect to a Karcher for sure. My old Karcher had the same M22-14 as I showed in the video. Thanks for watching

[@SZ_7722]

thank u, what would your BEST PRESSURE WASHER recommendation for home use on car, grill and carpet cleaning

[@HawaiiDetailing]

www.hawaiidetailing.com/portable-pressurewasher Check this out. It’s all my thoughts. Thanks

[@viperrcr]

How do you know when or when not to use the white vinyl thread tape? Is it whenever a o-ring/gasket is involved then you do not need the thread tape on the connections or should I just always use it when attaching the quick disconnects?

[@HawaiiDetailing]

For a National pipe thread connections use the tape.

[@troyhenry3267]

Tesla, question: roughly how many ounces of soap do you pour into your foam cannon if it's a 32oz container? and fill the rest up with water.

[@HawaiiDetailing]

Look here under Foam Cannon Soap Mixes. I talk all about it. LMK if you have any questions www.hawaiidetailing.com/dillution

[@bobclapper2672]

Please do a video on cordless DA polishers & how to use them !

[@HawaiiDetailing]

Will do in the future. Thanks.

[@bobclapper2672]

@@HawaiiDetailing Thank You Sir, glad to see your channel Take Off, I’ve been with you 2 years

[@HawaiiDetailing]

@@bobclapper2672 thanks. I appreciate it.

[@Dave-kl2pq]

I'm not sure if you can help me ? But my pressure wash alrady has quick connect on the front, and I am trying to find a longer hose off Amazon. I just took a few photos if you need ?

[@HawaiiDetailing]

Not sure what you have or need. Check here to see if any of this would connect. They are common size connectors. www.hawaiidetailing.com/portable-pressurewasher

[@Bananero_]

Work with 50’ 5/8 hose?

[@danmcgee4734]

Great video. Thank you. Subbed.

[@rhsab1]

Give the new OG Foam Cannon Mount a look, its a beauty!

[@HawaiiDetailing]

Yeah. I have it on there. Unreal craftsmanship

[@rhsab1]

I mean't the new foam cannon wall mount

[@ArnageInFL]

You can easily put together your own for less than half the price.

[@ChristopherAalto]

I have a Michelin pressure and I’m looking online to find information regarding quick connects for it with no luck do you have any idea where I can find any information on what to buy ?

[@HawaiiDetailing]

I am not familiar with that brand. Most of these items will fit most commonly available PW’s. www.hawaiidetailing.com/portable-pressurewasher

[@troyhenry3267]

Great video! I've done all of the upgrades to the OG spec stuff and love all of them. They've made my sunjoe press washer more enjoyable to use on every wash. My only issue i'm having is on the Kobrajet hose i purchased from OG back in 2017 I believe , it is not as pliable or easy to coil up after a wash. It fights me trying to coil it up , I turn it one way, and it wants to go the other way. It is a work out. Thinking of replacing it with one of the V1 kobrajet high pressure hoses 50 footer. OG support tells me the one i have is more stiffer than the one they sell now. Is the high pressure OG hose you have still easy to coil up even with water in it after a carwash? What are your thoughts?

[@HawaiiDetailing]

Mine is on a reel so its always easy. I have not noticed it stiffening at all though. It feels the same as when I put it up there. Shut the PW off and bleed the pressure from hose with the trigger before you try to fight it.This model OG hose is definitely a bit more flexible bit.ly/2UmpQRf I have a 50' version and its nice. All these commercial grade hoses are naturally stiffer then cheaper models but it shouldn't be crazy stiff. I am not familiar with the new kobrajet hose. I will have to take a look at it. Here are the hoses that I recommend depending on budget and use. www.hawaiidetailing.com/portable-pressurewasher Hope that helps

[@Zer0chucksgiven]

Great content! I’ve got a sun joe pressure washer and have quick connects for my Uber flex hose and MTM hub. What is the best QC to use for my garden hose to attach to my sun Joe pressure washer. Does it need a specific adapter being m22-15.

[@HawaiiDetailing]

Thanks. Here is all my parts and pieces for my personal kits. www.hawaiidetailing.com/portable-pressurewasher

[@enzobids]

Would you recommend the OG in house hose or the Kobrajet?

[@HawaiiDetailing]

@@enzobids Both are great quality and user experience. The Kobrajet has a texture on the surface and can get dirty easier. The OG is slick surface and wipes clean easy. It comes down to what color you want also.

[@mp2833]

All new equipment...only used once to test it.. I have an ar max 3000 pressure washer (3000PSI)with the newer mjjc foam cannon set up. Why do you think its leaking from the very bottom of the mjjc gun and where its connected to the powerwasher using a uberflex powerhose. I believe the mjjc lance came with O rings & Teflon tape....I never utilized them....could that be the reason why water is leaking from both areas? The Uberflex powerhose does not have any quick connects attached, just twisted and turn as best as i can to the powerwasher. Lastly, from your video you pretty much have a quick connect for everything that requires an connection.....does that help prevent the leaks over screwing things in to connect. I do no have a quick connect for my garden hose. Will the 3000PSI ruin my car? The mjjc lance came with a adapter that changes it to a few different spray patterns.

[@HawaiiDetailing]

Send me a pic to [e-mail]

[@jessebeats2496]

Do all the versions of the OG hoses come with the quick connects? I noticed there are 3 different hose versions

[@HawaiiDetailing]

The ones I have linked do. I am not sure about his whole inventory. Sorry. Hope that helps.

[@aaron6822]

Does the metal on the pressure washer still break off after a couple months?

[@HawaiiDetailing]

Not sure what you mean?

[@aaron6822]

@@HawaiiDetailing ok. Doesn’t mean it doesn’t happen. A lot of people complain that the piece where you attach the hose to the pressure washer completely breaks off and is unrepairable. It’s a well known defect of the pressure washer. There are 2 types of reviewers, the ones with objective reviews that protect the consumers and the ones that sell out for sponsorships

[@HawaiiDetailing]

@aaron6822 what are you trying to say? I have not heard of it? If it happens say it. I don’t care?? I have not taken any money from any of these PW companies. With that being said who do you feel is the bias vs unbiased opinions?

[@chelo3510]

Great videos! Purchased the Uberflex and Coxreel. Noticed I can’t hook it up without buying an adapter for the inside of the the Coxreel. Is that correct? Should be 3/8 NTP to 22mm 14 male adapter. Are you able to confirm?

[@HawaiiDetailing]

Yes the uberflex is not designed to connect directly to the reel. You will need to adapt to 3/8.

[@mskmsk7174]

Awesome. Thank you.

[@HawaiiDetailing]

You're welcome!

[@HoosierDaddyDetailing]

What's a decent quality hose reel you'd suggest?

[@HawaiiDetailing]

here are my favorites www.hawaiidetailing.com/wallmountedpressurewasher

[@HoosierDaddyDetailing]

Thank you sir ​@@HawaiiDetailing

[@aaron30569]

I always recommend watching the obsessed garage video about the pressure washer and noting which orifice size he recommends for the most gpm

[@HawaiiDetailing]

Thanks for sharing that info.

[@KDR195]

what did obsessed garage recommend for the orifice size for nozzle tip to get the most amount of gpm? or do you know the title of the video from obsessed garage? TIA

[@DexterousGamings]

Love your humor 😅

[@michaelford3pl]

I'll buy a used ryobi for $300 before i buy a active 2.0 for $6.79 from OG. That guy is an absolute tool

[@alphasmurf6563]

I’m sure he doesn’t care about a cuck not buying from him

[@Amor1990]

Was your area affected by fire?

[@BearThatSwings]

yup

[@HawaiiDetailing]

No. I am on another island. Thanks for asking

[@808dms]

How do you like the Active 2.0 pressure washer? I just bought a Ryobi 1800 the other day. Wondering if I should return it and get the Active 2.0 instead. Is the Active 2.0 worth the 2-3 times price?

[@HawaiiDetailing]

Here is my thoughts. I would start with a entry level PW like the one you mentioned and kit it out with these type of upgrades to get you a great user experience on a budget that suits you. If you have the extra money I always would go with the better tools ex. the Active 2.0. This will provide a good mid level pump and with these added accessories you will have a great kit. If you are serious about your tools and want the best I would go with the Kranzle and not look back. Hope that helps.

[@808dms]

@@HawaiiDetailing thanks for replying. I’m very tempted to return the Ryobi and get the Active.

[@seanclark5670]

Have you tired the active short gun yet ?

[@HawaiiDetailing]

No I have not. I just dont like the way it even looks so I kinda stopped there. Thanks for watching

[@JasonShellop]

That's cool 😎

[@HawaiiDetailing]

Thanks.

[@rpmautodetailing5958]

Did u have issues with your Active 2.0 pressure switch? It doesn't like rubber hoses allegedly.

[@HawaiiDetailing]

No. It’s fine. Every ounce and a while you have to actuate the trigger but overall it’s great. Nothing like the kranny though. Thanks for watching

[@jeancassel]

It never ends man, hahaha, I agree.

[@HawaiiDetailing]

It never ends. Thanks for watching

[@jeffreyrobert9460]

No doubt get a Coxreels.

[@HawaiiDetailing]

Yeah they are solid.

[@ghffrsfygdhfjkjiysdz]

Here's some trivia: Q: How was the pressure washer and foam cannon invented? A: Chuck Norris was looking for a better shave routine.

[@HawaiiDetailing]

Hahaha.

[@emilepmartin]

#MauiStrong

[@ABCDEF-j9i]

Does swivel connector needs to be at both locations? Or if i just use it at gun location will that help alleviate the kinking issues? Thanks

[@HawaiiDetailing]

You can. I normally go for the least amount of fittings to get the job done. Less fail points.

[@AntLive29]

Super helpful video. I appreciate the tip for coiling my hoes. Thank you

[@HawaiiDetailing]

Thanks for following the channel.

[@MatthewHurtado]

First

[@HawaiiDetailing]

There we go. Thanks man.

[@srt8990]

Ahh?…Second but…Does anyone want to start off with the obvious?😅 I’ll look for additional comments.

[@HawaiiDetailing]

Thanks for being on top of it.