Best Right Angle Attachment Showdown (DEWALT VS MILWAUKEE) Right Angle Attachment Tool Duel!

[@jjrock5]

I used my Dewalt one last month with a 1-1/4” spade bit to drill through 3/4” subfloor to install baseboard heat tubing. It did great and no damage to it at all. I used my Milwaukee M12 drill ironically lol

[@armindo54]

I have the MILWAUKEE 49-22-8510 which heavier duty than both of the right angle attachments reviewed here. I've had it for a few years and have been very pleased with it. It costs more but in my opinion, it's worth it.

[@kingsteegg]

I picked up the Milwaukee. I actually went to pick up the DeWalt. Out of stock, and I needed one for a job. After hearing what you said about the DeWalt's magnet, I'm happy I got the Milwaukee. The 1 inch bit provided was in there super tight. Works for me.

[@ToolReviewZone]

Thanks for the feedback TJ!!!

[@SeanHavlik]

I bought the dewalt because it was a bit cheaper, and it hasn’t disappointed me at all. I see no reason to switch, it works great.

[@kllgrogto5838]

Milwaukee is the way to go, dewalt is for girls

[@azap1797]

Does the dewalt work in the Milwaukee impacts?

[@SeanHavlik]

@@azap1797 As long as they are 1/4” hex.

[@jeremynguyen2346]

@@kllgrogto5838 wheee do you

[@jeremynguyen2346]

@@kllgrogto5838 where do you buy the attachments for dewalt at

[@duncdunc76]

Gotta agree both will work fine and are great little time and trouble saving tools. I have an older Dewalt that looks almost identical to the Milwaukee in design. I also have the new Dewalt one. They both work well but the main plus for me with the new Dewalt design is the bit extractor hole in the back that allows you to put a nail or skinny screw in the back to pop your bit out to make extracting the bit easier. The old style is hard to get a bit out of sometimes. 1" phillips bits are recessed pretty deep in the tool and are hard to grab.

[@delliott777]

It's the month of Love and it's nice to see DeWalt and Milwaukee showing some affection for each other. They probably love each other more than their respective fans. :-)

[@ToolReviewZone]

Hahahaha, agreed delliott

[@FredD63]

I bought the DeWalt about 5 years ago and it’s still going strong I would also say I don’t think either of these brands will let you down I have several power tools of both brands and I would suggest either brand

[@johnrice9121]

I have the older Dewalt and love it. The video is awesome as usual. I give props for giving the evil twin a chance time after time. You are the bigger man👍

[@dantheman9395]

Had an older Dewalt one as well. It was pretty good

[@ToolReviewZone]

Hahaha, you would think I would have learned by now John. He will never change ☹

[@Lonestar-1984]

I have the Dewalt one and love it. Came with a bit kit I bought awhile back. I sold all my Dewalt and ryobi tools and went all into Milwaukee to stay in one platform. Kept my right angle attachment though and has worked great for me.

[@A6Legit]

I own them both. Basically the same thing. DeWalt is smaller but heavier. I measured them and the Milwaukee depth is ~0.5" and the DeWalt is 0.75".

[@RB-tm6ui]

I had the older DeWalt one. Slightly bigger. The bearing in it shattered after about half an hour of screwing 75mm 14g tek screws. Think I'll try the Milwaukee. Thanks for the vid.

[@landshark6659]

I need a left angle impact attachment all I can find is the right angle any advice on where to look

[@patrickbjordahl3239]

Same isle as the left handed crescent spud and the sky hooks adjacent from the blinker fluid in the automotive section

[@landshark6659]

@@patrickbjordahl3239 thank you ill look 😆

[@jeffh7021]

Right next to the left handed vacuums

[@yagsvarriale7]

Wow, he did this entire video without dripping any lip gravy. Sign of a true pro!

[@ToolReviewZone]

Hahahahahaha 🤣🤣🤣👊👊

[@olhesty2196]

Haha, it made me put one in.

[@marcomisterio8356]

Guess it boils down to each users preference... Its a win win for both tools...and also how well does the user use the tool to suit the need... Always a great and informative video...TRZ rocks...

[@ToolReviewZone]

Great comment and really appreciate it Marco!!!!👊👊👊👊

[@Javinkay]

I like both brands a lot so personally I’d go with the cheaper one

[@jjdynomyte3677]

I own a Dewalt that I got in a kit and I love it. The difference between the Dewalt and Milwaukee is that if you're using a short 1" bit its sticks out less than the Milwaukee one. But I've got to say that I'm a Milwaukee fan.

[@ToolReviewZone]

Thanks for the feedback JJ!!!

[@patrickbjordahl3239]

Samzies red fan boy hear but I use the Dewalt right angle attachment. In a game of millimeters it helps and as I said in a previous comment the old Dewalt came with a removable reaction arm that you could rotate and it saved my fingers more than I could count. Especially in those tight places where you cant get a hand on the attachment to keep it straight...basically 1 handed operation

[@brentdiez7012]

I like that the Dewalt can hold a 1" bit, and with the hole in the back, it is easy to remove it. I needed this for one of my DIY jobs and it worked great.

[@MrWzeljunior]

Is there a way to keep the right angle driver in a fixed position (in the chuck) ? Or is it always necessary to hold it in place with your hand and push down on the head to keep it from spinning/rotating in the chuck?

[@willyjilly9684]

I asked for this a few times on several channels. Glad you did a video

[@ToolReviewZone]

You got it brother 👊

[@nerdymra8252]

👼🎶"Treated 6x6 with no pilot hooooollllleees" 🎶👼. 😂. Awesome review Clint. Look at the subscriber number jump.....well deserved!

[@ToolReviewZone]

Hahaha, thanks Nerdy, appreciate it brother 👊👊👊

[@Peter-.H]

Thanks Clint. Really cool video!! I have both an i though they where great until I bought the ARES 70790. If you want something durable, that’s the one to buy.

[@stevetekrv5791]

Milwaukee makes a similar unit...of course it's more expensive. Milwaukee 49-22-8510

[@ToolReviewZone]

Ima try it Peter, thanks for the info!!!!

[@Peter-.H]

@@stevetekrv5791 : I didn’t know Milwaukee had another one. Looks very similar to the Ares indeed. Thanks for the info. Cheers 🍻

[@stevetekrv5791]

@@Peter-.H and it's twice the cost of the one Clint reviewed. Looks pretty nice though so maybe if used a lot it might be worth it.

[@christopherperry1108]

Great review, the DeWalt is overall smaller, but I think the business end of the Milwaukee is thinner. Anywho again great video and Like button engaged.

[@ToolReviewZone]

Thanks Christopher!!!!!

[@Danko88]

that was real nice right !! I just got the Milwaukee one in a kit.

[@ToolReviewZone]

Nice👊

[@garvielloken3929]

Dude! This was soooo entertaining! Subbed!

[@ToolReviewZone]

Haha, awesome. Welcome to the channel Garviel!!!!

[@playabluffhotel8487]

I like the Dewalt which is a little bit smaller.

[@PowerToolsForBeginners]

thanks for the review! I love your videos and im a fan!

[@ToolReviewZone]

Thanks brother, I appreciate it 👊👊👊👊👊

[@CB_ChaosLove]

There were actual lolls to be had on this video!!!😅

[@_P0tat07_]

A+ on the heavenly pressure treated 6x6 with no pilot holes intro

[@ToolReviewZone]

Hahaha, thanks P0tat07 👊🤣

[@HVACingMyWay]

Milwaukee makes another version built way better it’s a beast I’ve put it threw a lot still going strong.

[@ToolReviewZone]

I'll take a look Hvac👊

[@karyldavidkidd7111]

Thank you bud. Need one. Couldn't figure which one would last more than a week.

[@ToolReviewZone]

I think you will be ok with either Karyl. Both made well 👊

[@MrJungo]

I work with the dewalt tool. I'm happy. The Milky Way is not very common in our country.

[@dirkhaar2243]

What about short bits? I saw another review where they nearly vanished in the adapter, like @Sean Duncan says, too. Is there something to do against that?

[@Siempre_azulcrema5]

Just ordered the Milwaukee one at work😎

[@dantheman9395]

We had a couple of the Dewalt (older) ones at the window fab shop. Hated using it. It definitely got the job done. However it was just to difficult to get my hands in the places to use that. 👊

[@ToolReviewZone]

Yeah buddy, I know what you mean. Have to really get used to holding them

[@patrickbjordahl3239]

The older all silver one? Came with a kick stand/reaction arm loved it (as an electrician) the only thing you could use trying to attach a handy box to the side of a stud

[@larrykahl8086]

Dewalt has a new 2 piece right angle attachment, DWAMRA is the product number. It has a handle for the compact part, found it at Home Depot for $24.97.

[@ToolReviewZone]

Thanks for the info Larry!

[@jorgeo1492]

The 6x6 edit lol. Great vid man some sense of humor in these reviews is cool

[@kennedymcgovern5413]

6:25 Yeah, I have the DeWey version and I found the same thing in real life. I tried to use it to turn the leveling bolts on my riding mower and it said "nope." They just don't transfer torque very well.

[@rescuedad77]

I have them both and they both work great!

[@ToolReviewZone]

Thanks for the feedback Matt👊

[@rescuedad77]

Thank you for your reviews!

[@peepo2222]

I used the Milwaukee for sheetrock above some beams. The tip kept coming out. It wasn’t just mine either my buddies did the same

[@mannyc805]

I have both I like the milwuakee because it doesn’t burry small 1’ bits like the dewalt

[@alexllc2958]

I had to buy the Milwaukee ; it was the only one available at Home Depot when I need it ...

[@ToolReviewZone]

Yeah it's weird. Usually they have one or the other, but never both at the same time

[@AntonioClaudioMichael]

Good video Clint @ToolReviewZone

[@91ninjazx75]

Braaaa! You are one f'en funny son-of-a-gun! Love the vids man. Great GREAT JOB! Am I the only one who noticed that the first test with the screw, was only done with the Milwaukaa-i-A. The Dewalt didn't get a chance. Oh well. REAL-NASSSS-LIKE!!!

[@ToolReviewZone]

Hahaha, thanks Ninja! I may have accidentally cut it out with the Dewalt. The edits were lagging in the program and was struggling to edit this one 😔

[@stevetekrv5791]

Clint, check out the Milwaukee 49-22-8510. Sure it's twice the cost, but it's all metal, adjustable handle, and a tank.

[@ToolReviewZone]

Awesome, I'll take a look Steve!!!

[@irving2451]

Great video! You do have fine sense of humour.

[@Dan-ef4jz]

Right now 3/27/22 Home Depot has the right angle adapter with a 70 piece shockwave bit set for $32!!! Originally $68

[@benniebennie3697]

I’m was a big Milwaukee fan, but dang if they haven’t sold out to China

[@gatspilla2916]

I just bought the milwuakee online from Home Depot but the reason I got it was for 35 bucks it came with 72 bit set

[@paulcarrjr5536]

Awesome video. Great job

[@ToolReviewZone]

Thanks Paul!!!!

[@jeffh7021]

I still think I'm going to buy the all metal one that milwaukee has out. It looks to be the sturdiest one I've seen so far.

[@bluemantom77]

Nice job there 👍 I might have pick me one up

[@ToolReviewZone]

They are pretty hands to have Thomas 👊👊👊

[@amoscardoza5253]

Yo TRZ! I caught that! You slipping in " I got big hands" for allylur female subscribers! Well played sir

[@ToolReviewZone]

Hahahahahaha AMOS!

[@danielgranderson1794]

What is the warranty lookin like for both?

[@1FaSS01]

I've got 2 dewalt and 2 milwaukee attachments, they all got their uses Buy them both, lol

[@djpatel78]

Can I able use DeWalt on a Milwaukee drill.

[@ToolReviewZone]

Yes

[@prestigemechanical3600]

Check out the old school M12 brushed right angle impact driver. I’m not kidding you it is my goto for servicing and installing HVAC equipment. It gets in places many other tools can’t and can be done one handed 🤙

[@johnargumaniz9179]

Milwaukee makes another version of that attachment. Not sure what the difference is but it looks like it’s made of all metal. Like I said unsure what the difference is in the 2 models

[@ToolReviewZone]

I'll take a look at it. Maybe I'll get it on the channel 👊

[@johnargumaniz9179]

@@ToolReviewZone MOIST!!!!!

[@ToolReviewZone]

Hahahahaha, soooo moist🤣

[@miguelcastillo2319]

I have dewalt makita and Milwaukee to me i dont think it matters when it comes to accessories go with the better deal

[@ToolReviewZone]

I have to agree 👍

[@AntonioClaudioMichael]

There also other brands at home depot in the plumbing section Malco I belive @ToolReviewZone

[@medimlovaraju4579]

Sir L type nut remove adapter available please tell me

[@rondamon8004]

Dewalt is my choice bcause of the design, slimmer so fits better in tigh spaces and is tough too, the other one is a little more bulky...

[@tedmcdonald3377]

Clint that's the greatest Valentine movie ever!!!!

[@ToolReviewZone]

Hahahahah, it's a real heart warmer Ted 🤣🤣🤣🤣

[@tedmcdonald3377]

@@ToolReviewZone ❤

[@jackhammer8364]

My Dewalt one works good!Havent tried the millwakee one yet!

[@raffaeledonofrio2729]

I bought the Dewalt looks a little bit more compact and more metallic (better quality). Ridgid is owned by the same company as Milwaukee.

[@cajunice3588]

But what about the other milwaukee right angle the white 1 with the flip out handle

[@ToolReviewZone]

These are the only right angles they sell in my area and probably the most popular, but I'll take a look at the others

[@adambomb9452]

great review!

[@ToolReviewZone]

Thanks Adambomb!!!

[@sknight0391]

Dewalt 👍👍👍👍👍👍 The black version at Lowe's is the same as the yellow one but it looks bad @ss!!!

[@jackhammer8364]

I find the yellow one every time!

[@jimserhant7741]

Yes! I finally have a tool you prefer over another lol. Thank you for taking the time to produce another excellent review. The things I love about my DWARA60 are the size, it fits it tights spaces without issue. The magnetic holding power is amazing, haven’t lost a bit and/or screw, yet. And, I actually like the positioning of the ribbed grip directly above the bit , it allows for that extra down force sometimes needed without having to worry about my thumb slipping when driving a screw.

[@Scuba_Son]

There is actually a Heavy Duty DeWALT verson too. DWARA120

[@ToolReviewZone]

Yeah, just seen it tonight. It's black right?

[@brentmileti]

Yep, I got one and it's real nice like

[@Scuba_Son]

@@ToolReviewZone yup.

[@AntonioClaudioMichael]

I have all of the dewalt models and have held up well other then the first one dewalt made never purchased the Milwaukee @ToolReviewZone

[@VenomousB6U6R6N]

The dewalt looks the coolest

[@scotthowell8083]

I got the DeWalt angle adapter for free with the purchase of a driver bit kit.

[@A6Legit]

I want to say it was my dewalt that i kept getting my bits stuck in. Not that the magnet was stronger but the regular bits sit too deep to grab them by hand

[@wolfcommander6009]

The rigid octane needs a kobalt xtr bulletproof

[@kc0lif]

cool video.

[@ToolReviewZone]

Thanks Chris!!!!

[@bigbossmgmt9143]

Used to big a fan of rigid tools can’t understand why they killed the octane brand. I went to Milwaukee after that

[@bradl4365]

If you used a corded drill, it would have given more power.

[@ИгорьДемьяненко-ш2ж]

Кароч , у Милки не магнитит внутренний магнит , а кольцевой магнит у Дэволта работает как надо . И о цене : Милка за три рубля , а Дэволт - за руб ...

[@FoxOutdoors]

The Dewalt is just better. When in use keep it under 3000 RPMs or 887 Speed 2. Also dont drive 6in lags with this...

[@jasonbabila6006]

Smeeesh that like button.👀👉🏽 👍🏽

[@ToolReviewZone]

Thanks for the SMEEESH Jason!!!!!

[@JoseRodriguezFrio]

Dewalt comes w/ a 90 degree handle now

[@cajunice3588]

And there is also a dewalt flex shaft 90

[@chriscord6524]

Take the four torx screws out on the face of the Milwaukee and grease the fuck out of the bevel gears. I used the red tacky kind. Then put a 12” extension and run on high till she’s butter.

[@popaflorin8161]

Milwaukee support 225nm and dewalt just 40nm.

[@opinionatedman]

I came to KZbin to see a comparison. I am an electrician and I broke my Milwaukee adapter. I rarely use it, but when I do it's a brutal request. I try to minimize any drywall damage so there are many times I would like to drill down through the top plate but the roof angle creates a significant height issue so I pop a daredevil bit into this adapter, start as straight as I can and angle it as I sink it in. Usually the bits are 1 inch or less but occasionally 1 1/4 or 1 1/8. Lots of nails in these missions. I took the adapter apart and am not very impressed with the overall construction. Keep in mind I am a big team red guy so if anything my bias would be pro Milwaukee. The side you attach to your drill there is a form fit collet of sort around the hex shank to give a rounded exterior. That broke in 3 places. Around that piece was a cylinder that cracked lengthwise. It seemed to exist to allow the inner piece to rotate within it. They could have had a design to that shank to make that section permanently round and put a bearing on it but they cheaped out hard. The shank that runs the length has a slight bow in it, which could have caused all the cracks and failures. Then finally the head itself has a crack in it. 6 points of failure in that tool. I'm going to buy a Dewalt one next, went with the Milwaukee originally based on brand/preference.

[@arcticheroh]

Milwaukee all the way. No need to explore DeWalt Disney tools.

[@alpharemoval2046]

Got the wrong milwaukee attachment

[@ppk2823]

I just wanted to see who actually uses these (mine sits in a bucket).

[@TacoMan-bx4yp]

Mac&cheese

[@trevorsaunders206]

Every once and a while dewalt will put the angle attachment in a kit at depot... I think for 15$ the rest of the kit didn’t make it but the angle is still around

[@shooter_ric5722]

No paddle bits? LOL

[@orlandomartinez4031]

dewalt came in a package deal with some bits set for 20 bucks so its like i got it for free .

[@CowsGoM3ow]

Smaller + Cheaper + Toughcase. Ez win for dewalt.

[@ToolReviewZone]

Awesome 👊

[@Notyourgrandad1900s]

There’s a feature on the dewalt, that not one of you who has ever “reviewed” the tool has mentioned. You can see the feature on every video of the dewalt. Look on the backside, that little hole. Drop a 1 inch bit in both the Milwaukee and dewalt. To get that one inch bit out of the Milwaukee, you need pliers. To get a one inch bit out of the dewalt, you just need a little pokey instrument. Not a single one of you “reviewers” has noticed that feature on the dewalt. Make it real.

[@evokethegoat9077]

My desalt one gets kinda hot, would like to know if any of the milcockee owners ever experienced this

[@7milessouth]

Rigid made in same factory as Milwaukee... biased

[@ToolReviewZone]

Hahahaha 🤣

[@7milessouth]

If there’s a will there’s a way 😂💀

[@ToolReviewZone]

Haha, I was waiting for it lol 😆

[@konamanstudio2447]

😆🍻🍺😊