Best Screwdriver Brand? (14 BRANDS) Milwaukee, Dewalt, Makita, Ryobi, Bosch, Pink Power, Metabo

BRANDS TESTED: Milwaukee, Dewalt, Makita, Ryobi, Bosch, Pink Power, Hybro, Skil, Worx, NoCry, Black & Decker, Tacklife, Metabo, and Teccpo. Battery powered screwdrivers tested for max torque, max speed driving in screws, clutch and variable speed performance, and a very grueling endurance test. No matter the cost, I buy all of the products tested to ensure a fair and unbiased reviews. So, thank you for supporting the channel and making these reviews possible!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Pink Power: amzn.to/3aCoXgc
DeWalt: amzn.to/2QQCdGW
Milwaukee: amzn.to/3sQDkUa
Hybro: amzn.to/3nhrVvA
Metabo: amzn.to/3ni2Ssl
Makita: amzn.to/2QZeS5N
Skil: amzn.to/3emPwa0
WORX: amzn.to/3tTrdan
Black & Decker: amzn.to/3xi2D5j
NoCry: amzn.to/3v9crN0
TackLife: amzn.to/3gDmCFl (no longer available)
Bosch: amzn.to/3aCBWyx
TECCPO: amzn.to/3ni3yhn
Ryobi: amzn.to/3xmfXFw
Laser Tachometer: amzn.to/3ozdINn
Sound Meter: amzn.to/3uM7WsB
¼ Torque Adapter: amzn.to/3uPVus6
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/2SvwQdS
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

[@dana5865]

I think, on KZbin, It is almost impossible to see any brighter smiles than his. Honesty and integrity from him is huge to me. Thank you.

[@mackjsm7105]

Don't worry the left will cancel him too..

[@phillipcsandoval9094]

I agreed with you 100%. He is like a saint for me or for all of us in fact. Thank you.

[@ProjectFarm]

You are welcome!

[@mackjsm7105]

@@ProjectFarm Dude.. After a long 80+ hr week.. I sit back on Sunday.. do my invoicing and put your channel on.

[@Nequitvis]

No 30 minutes intro, no talking about offtopic things during videos. A lot of people including me are looking forward for the best choice to make when it comes to house working. Thank you! You deserve more credit for what are you doing!

[@AlexGMason]

Yeah, honestly, the videos are just entertaining even when it's not something I even have need for!

[@TheSlimCognito]

I agree. Maybe one day we will be able to walk into the store and see that nice vibrant sticker that has the project farm seal of approval. Would make shopping for tools much easier.

[@simpleman8883]

@@TheSlimCognito “Project Farms Performance Winner for power tools” etc

[@AlexGMason]

@@TheSlimCognito I'd print it right onto the packaging haha.

[@TheSlimCognito]

@@AlexGMason true, but I feel a sticker inside that can be peeled away or put on something else would be kinda cool.

[@georgec397]

Did anyone see the five-minute test per brand? That was only the five-minute. Imagine the time spent doing other tests and preparing this video. The time he dedicated to test every brand deserves a subscribe to his channel. 👏

[@ProjectFarm]

Thanks!

[@Xzenoph]

Literally everyone who watched the video saw that.

[@Omniverse0]

@@Xzenoph Got'em!

[@pjsivley]

Yeah I seen it but I don't quiet understand the purpose of it.... I'm pretty sure nobody will be buying any of those to turn another drill. You could call it a torture, battery, and/or torque test but would be a terrible one.

[@brandonmorson6568]

Love the "no frills" comparisons, as a DIY and mechanical hobbyist, I love tools and this channel really makes it easy for me to chose which one will suite my application.

[@ProjectFarm]

Thanks! Thanks for supporting the channel! I really appreciate it!

[@shadygunshow]

Man, I really wish you used the 7.2v makita drill. Milwaukee and metabo straight stole their design. But even better, out of my 50+ cordless power tools is the makita 7.2v IMPACT DRIVER!! It is the most amazing tool I’ve ever used and it’s really amazingly durable and if the brushes go out you just swap the whole motor super simple. It has a trigger on each side with variable speed. It’s seriously genius

[@zachchartier9332]

Sorry in advance, this is gonna be a long one. -- Can we all just take two seconds to appreciate this man for the time and effort he puts into his videos? Yes, I'm sure he learns things from his own videos, but he has NO reason to go to such depth for HIMSELF. He takes NO sponsorships. ALL damage is out of his own pocket. All TIME is taken from his own responsibility. This man is single handedly taking on the mainstream commercial forum and is winning. Not only are the tests themselves higher quality than anything else on any platform, they're videoed, charted, and repeated on various test media. This man in his home has taken more prerogative than any billion dollar company has in testing their materials. A true hats off to you , sir. And many more years to come!

[@ProjectFarm]

Thanks so much! I really appreciate that!

[@TheNukedNacho]

This man is an underrated HERO.

[@craigstover8535]

Big facts, this guys amazing and literally the only chanel I trust

[@alexrowdy2718]

So he just buy all these tools and throw them away after this brutal testing 😳. Isn't it too expensive ?

[@seanbrennan6961]

I don't always patreon, but when I do, I Project Farm.

[@xXSCARFACE1983Xx]

Project Farm is the only KZbinr that I actually believe when he says "I'm not sponsored"

[@ethimself5064]

One of the very few👍👍

[@gabeford895]

Ave too

[@ethimself5064]

@@gabeford895 Ave who?

[@FJB2020]

@@ethimself5064 you are missing out if you don't know who that is...

[@snakehead324]

Ave is an vulgar version that doesn’t do as wide of comparisons but tears new tools completely apart sometimes to review how they are made.

[@silverXnoise]

I’m a professional low-volt electrical contractor, that Dewalt screwdriver is one of the best tools I’ve ever purchased. The gyroscope becomes very natural after you get used to it.

[@ProjectFarm]

Thanks for the feedback.

[@peterhoy2382]

Thanks for the reviews with succinct decriptions, really good detail, no wasted time between tests. I wish all review videos were as good as this one. Awesome. Keep up the great work. Subscribed.

[@ProjectFarm]

Thanks! Thanks for watching and subscribing!

[@NextEevolution]

This is a channel where brand loyalty comes to die, and for good reason.

[@ProjectFarm]

Thank you very much! It's all about the best tool winning!

[@NextEevolution]

@@ProjectFarm I can't thank you enough for all your testing, especially on automotive products like engine oil and lubrication greases!

[@phillipcsandoval9094]

Beautifully well said! Thanks to our man, Project Farm!

[@bobdodge3171]

@@phillipcsandoval9094 i have and use ryobi for many years.. After i bought a ryobi 12v for a back up for my 14.4 Makita.. Doing decks.. And that ryobi kicked my Makita all day long.. That's when i started buying ryobi.. But not all ryobi stuff is great..like every mnfr here

[@phillipcsandoval9094]

@@bobdodge3171 , Totally bro, I did have 12v ryobi more than a decade ago, and yes it kicked ass, but I ended up giving it to my stepdad...Right now I don't have anything, so yeah I've been looking and looking and still undecided... Thanks brother.

[@frederichoyos678]

Project Farm has all manufacturers hold their breath when he say “we’re gonna test that”.

[@ProjectFarm]

Thanks for watching!

[@keithmo80]

Amazing how all these huge multi million and billion dollar company’s mislead on advertising lol

[@kevinhadap6463]

@@keithmo80 Not disagreeing, but there are also some things to consider for some of the tools included. Torque can vary greatly depending on the batteries used (for those that didn't have an internal). Also, note the liberal use of the hated "up to" ratings :| One of the "avoid like the plague" keywords...

[@jordangogo8413]

@@ProjectFarm fffffff

[@jordangogo8413]

@@keithmo80 f iddut

[@chrisperrien7055]

I gotta say, I have an old Black and Decker AD600 screw-driver/drill uses 4 AA batteries. I received it as a Christmas present about 25 years ago. I bought bit and drill sets for it and the Thing has been doing all kinds of stuff that whole time, I really didn't expect it to last a year, now it rates up there as one of the best Christmas presents and tools I ever got/have.

[@ProjectFarm]

Thank you for the feedback.

[@spicydramarama852]

For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life. John 3:16

[@joemamr710]

This video is about electronic screwdrivers So many people have given their only sons for all kinds of stuff. Think about the average war.

[@stephenstrang590]

The old black and decker stuff never dies. You hear all kinds of stories.

[@chrisperrien7055]

@@stephenstrang590 Toaster Ovens :)

[@blakestewart3043]

There were 15 different brands that he used in the five minute test that 75 minutes of holding those screwdrivers down. That is dedication lady’s and gentleman

[@ProjectFarm]

Thanks for watching!

[@britishmgtow7251]

the guy is a testing Jedi

[@jacobvarley5453]

Ladies

[@SimranSingh-sf1mj]

Can you test circular saw and Sanders which one works better

[@tryingtoenjoylife1290]

Dude there is no ladies in this channel lol

[@owendistefano6715]

there is nobody on KZbin i trust more than Project Farm, you always hive us the no bs results thank you

[@grrinc]

Same here. I trust this man 100%

[@mercoid]

This is what more and more people are seeking these days. It is encouraging to see a growing number of people rejecting BS.

[@ProjectFarm]

You are welcome!

[@joshk.6246]

His channel sets the benchmark for testing with no corporate sponsor BS. He's sponsored by his fans 😃.

[@flamingpeter244]

I agree he is easily my number one trusted source when i go buy a tool

[@exyiseyres]

I'm trying to make a point of liking all your videos my man, but unfortunately I end up binge watching all of them and miss some here and there. I just hope you see this! Your video formatting is pretty sacrificial and in the most respectable way. You do an excellent job editing and narrating. The information is always perfectly valid and there is no doubt left uncovered by you. I respect and greatly appreciate your efforts. Thank you so freaking much, you've done me a LOT of good!

[@exyiseyres]

I wish I could subscribe twice, no joke

[@ProjectFarm]

Thanks so much!

[@perrydear6306]

Really appreciate the time and effort that goes into your productions, I like being able to make informed buying decisions before finding out the hard way! Thanks!

[@ProjectFarm]

You are welcome!

[@Maxid1]

Big tool company:"We can claim anything we want! Who's going to test our claims? Project Farm:"Haha! We're going to test that!"

[@werdfeefs7027]

Yep. It's really kind of disgusting how in almost every single one of PF's videos, every single tool manufacturer except one or two have completely false advertising claims plastered all over their tools.

[@sage5296]

They're "lab conditions" or whatever probably, meaning you find a tool that performs above average, find the best possible test equipment and scenario, write down only the highest readout, then add 10% for good measure. There might be some truth to it (emphasis on might), but it sure as hell isn't practically meaningful. That's part of the beauty of these tests here, they're all pretty practical!

[@ThePegi27]

Milwaukee claim usually what so ever... xxx faster, xxx stronger, xx life and so on... vs. What? Maybe against the worst and cheapest ones but it is ugly way to do things 🤮. Their method of measuremet is their own...

[@davidwestin6345]

@@ThePegi27 what on earth are you trying to say

[@ThePegi27]

@@davidwestin6345 u don get the point 🎯 ? Ok, let's move on 👍

[@tritonum]

It is so nice that you actually listen to your audience. Love your channel man.

[@ProjectFarm]

Thanks!

[@bobanterantler345]

he also reads and responds to comments on videos from over 3 years ago, this man is amazing love all of his videos

[@pvic6959]

@@bobanterantler345 agreed. ive had im comment on my comments many times and i cant say that about any other channel!

[@buschlightforlyfe9049]

He always responds it’s nice

[@wireguy123]

OMG...Fantastic review. I wish every review was as quick, snappy and informative, I hear everything I needed and not one piece of information I didn't need. Thanks

[@ProjectFarm]

You are welcome!

[@bigturbotsi86]

Man somehow i always find myself needing these videos. It means so much the work and time you put into these. Thank you for some of the most helpful information.

[@ProjectFarm]

You are welcome!

[@danl.4743]

As a shop owner, I pay close attention to your tests. Buying the right tool based on your tests can save a lot of frustrations down the line and it clears a lot of the misinformation about one brand or another. Thanks a lot for all your hard work.

[@Floortile83]

See, I find the opposite to be true. Because, for example, he shows a makita sander is better than a milwaukee, but also shows a milwaukee impact is better than a makita. And since each use different batteries, I have to compromise and go with the worse tool because I already have the batteries for it. So the tests become irrelevant as I end up sticking to one brand system.

[@keithyinger3326]

@@Floortile83 It would be nice if a battery was a battery like the good old days. Make them a standard size.. like we had D, C, AA, etc, so we can buy one battery and use it in All of our tools and not have to be buying Brand specific batteries. Then you have 4 types of batteries and chargers all laying around cluttering up the shop. As long as all the tools are the same voltage, then make the battery pack size standard. Change the size for different voltages to avoid using the wrong chargers or the wrong batteries in the wrong tools.

[@marcusborderlands6177]

@@Floortile83 you have tools, so that means you like to diy stuff, right? Make some battery adapters my dude., Or better yet buy 1 battery for each and cannibalize the connectors for your own universal battery setup. It's not too hard and saves a lot of cash just buying lipo cells to drop in instead of full packs

[@rufusconnolly8489]

This right here. Small business, being helped to make smarter investments based on the hard work of one benevolent man and (if he isn't his own editor) his editing team. I also greatly appreciate his diligence.

[@ronjambou6672]

@@marcusborderlands6177 they make power stacks. You can put dewalt battery’s on Mikita

[@SilentlyContinue]

Please test paper towels. It would be interesting to see how kirkland paper towels, brawny type brands, and a blue shop towel all fair against each other.

[@Tallnerdyguy]

Technically shop towels aren't paper, but cloth

[@ProjectFarm]

Thank you for the video idea!

[@DirtRider6010]

There are paper towels called shop towels. Don’t be technical without knowing what you’re talking about

[@270wsm140gr]

Test toilet paper

[@Tallnerdyguy]

@@DirtRider6010 the blue, shop towel brand are cloth. Don't be technical for a channel that is about technicalities. It's like saying "lets compare cars" and add a truck. You want to compare PAPER towels....

[@newt2010]

I have the dealt gyro drive, and love it. I have been using it for over 2 years now, and is very impressive on power for it's size. The gyroscopic drive takes a bit to get used to, but love that feature. Great video, as always. Keep it up

[@ProjectFarm]

Thanks, will do!

[@dash8465]

I have two of the Dewalt’s - straight/pistol grip and simply straight versions - and love them both. The gyro thing does take a minute to wrap your head around but it quickly becomes very intuitive… its like a regular screwdriver, the further and harder you turn the faster and harder it goes. Plus.. there’s no forward/reverse switch… just turn it in the direction you want to go.

[@ProjectFarm]

Thanks for sharing.

[@rufusconnolly8489]

I'm not sure how useful a tool like this would be for me, but I feel like I'd go for the DeWalt, but the NoCry seems decent for the money, same for 3 Ryobi. Nobody's gonna convince me that the Milwaukee is twice the tool that the DeWalt is lol not judging by the time either tool took to run a screw, and you're certainly not getting twice the torque out of it. Side note: I feel bad that the commentor gal's favorite tool brand didn't hold very well against that rusty old Milfuckee lol

[@firebladex8586]

I have the flip grip one too and I love the gyro. Been using it at work for years

[@jmo2321]

I love the dewalt screwdriver. I have the 680 which pivots as well as has a bit holder. Super easy to use and great even for sensitive things like install wall plates. It also includes a clutch if you’re trying to do something delicate quickly.

[@carlmarx7489]

I love how quickly you speak and the way you edit to waste no time.

[@ProjectFarm]

Thanks!

[@Realizinq]

Me too i wish all youtubers edited like thay, straight to the point

[@gonefishing2216]

@@Realizinq same, they always beat around the bush.

[@yunggolem4687]

Seems like a weird video for Karl Marx to watch. You'd think he would be impregnating another maid before firing her or whining about capitalism.

[@carlmarx7489]

@@yunggolem4687 yeah my name is Carl tho

[@chettmannley7949]

You tested so many of these, got me chuckling after a bunch, I didn’t know when you were going to stop introducing them! Thanks so much, this channel is great as always

[@ProjectFarm]

Thanks!

[@ryanlucas7280]

Dude puts so much time into his videos I don’t even plan on owning these tools I just find these videos satisfying

[@ProjectFarm]

Thanks!

[@gonzostwin1]

He is the Jafromobile of tools

[@shuritgaming8038]

Same

[@keyan8585]

Sick car bro

[@Ultimate3036]

Haha, same. I'll never buy one of these but I love his testing method.

[@mikeaninger7388]

Love this! VERY comprehensive with great charts! I’m looking for a small tool to quickly remove a truck bed cover. This gave me everything I need to know. Brilliant.

[@ProjectFarm]

Thanks for the feedback.

[@christopherford6695]

I have the DeWalt screwdriver. Picked it up for doing fire alarm installations. It's genuinely a fantastic tool for when you don't want to lug a full size drill overhead all day.

[@ProjectFarm]

Thank you!

[@spicydramarama852]

For God so loved the world that he gave his one and only Son that whoever believes in him shall not perish but have eternal life. John 3:16

[@kaptainkwadfpv7216]

This dude literally spent over an hour of his life to spin a drill with an electric screwdriver just to make this video. yall better leave Todd a like

[@ProjectFarm]

Thanks!

[@beinghuman3225]

@@ProjectFarm double cut carbide burr bit testing? 1/8" or 1/4" shank, take your pick. Thanks!

[@regsparkes6507]

I'm thankful that he does these tests, saves me a lot of money.

[@lunaticfpv17]

Ayyye a fellow drone pilot

[@bmm894]

Way longer !

[@johnnycoolguy9554]

I can't sing your praises enough. Thorough yet comprehensive, informative yet entertaining, there's just nothing bad about this series. You've perfected your craft.

[@ProjectFarm]

Nathan, thank you sir! This means a lot to me.

[@itchyprince3793]

I can’t agree more!!!

[@raynavarro1078]

@@ProjectFarm I have to add my praises, your channel is the first one I go to, to see if you have a review for a product I am looking at. Thank you!

[@MainStaysTrashCan]

I've had the Metabo for a couple of years now. Plenty of power for a screwdriver and the lowest clutch settings are great for delicate stuff that would be easy to damage. It's a great tool.

[@JamesPotts]

A factory maintenance worker friend clued me into them, back when they were Hitachi. Really solid tool that stands up to abuse.

[@briankleinschmidt3664]

@@JamesPotts That is good information. Hitachi makes (made?) great tools.

[@MatsNorway]

@@JamesPotts Did they just chance name again to Hioki?

[@angeltensey]

i personally have a metabo cordless drill with compact battery pack. it has more like pistol size, but it performes very well (surprisingly) compared to more powerful drills and costs less than market leaders such as bosch, dewalt and makita

[@spicydramarama852]

For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life. John 3:16

[@taylanator2000]

This was one of the most useful youtube videos I've ever seen. Just bought the NoCry using your link. Keep doing what you're doing!

[@ProjectFarm]

Thanks, will do! Thanks for sharing.

[@MikadoRC]

The amount of dedication this guy has is incredible... If you just add up the times from the endurance test, you'll find that he spent 65 minutes of his life just sitting there spinning an old Milwaukee drill with some electric screwdriver. And I cant even imagine how much time it takes to setup these tests and some of the contraptions he uses. More power to him, he deserves lots of subscribers and unlimited fonds for testing more things. Thanks!

[@Quickened1]

pretty sure it pays well....

[@ProjectFarm]

You are welcome!

[@MW-qv7ph]

@@Quickened1 and deservedly so

[@zackcraig9471]

This man deserves unlimited money and subscribers 👏

[@ProjectFarm]

Thank you very much!

[@jjsd250]

Agree 100 percent.

[@isnelsalazar]

He sure does!!

[@dantedanis]

When will his PF magazines will be out?

[@korvo9936]

@@dantedanis i'm still waiting for the PF Seal of Approval! When companies meets their crazy claims.

[@dylanwalter1]

I use the DeWalt daily for work, and results of this test are in line with my experience. However I think you're right in saying the gyro drive takes some getting used to, but once you get the hang of it, you can really finely adjust drive speed in a way that no other screwdriver tested allows. I use this drill for tapping threads in plastic, assembling sensitive electronics, and much more. it's been one of my daily driver as far tools go, and definitely feel like it's worth the short learning curve

[@ProjectFarm]

Thanks for sharing.

[@runslikeapenguin]

I'm in a similar boat, my work had full set of 10 Dewalt drivers that we had to get rid of because the gyro function was deemed an ergonomic risk. They were replaced with the milwaukee drivers because of the thumb switch. The milwaukee drivers are junk overall. The batteries will refuse to charge randomly, the thumb switches break quickly disabling the driver. the available torque and speed falls off after a month or two of use. overall they last about 1/3 as long as the Dewalt.

[@rufusconnolly8489]

@@runslikeapenguin I have had similarly spotty experiences with Team Red's battery products

[@johnT5]

Agree 100% with Dylan. Since getting and using the Dewalt once you get the hang of it, it's almost a telepathic experience to use. I grab regular screwdrivers now and look at them wondering why they aren't turning on their own. Huge fan of the tech in that driver.

[@ChristiandeLarios]

Agreed, the DeWalt is one of my favorite tools, and what wasn’t mentioned is that they have a higher-end model that allows for adjustment of the handle angle, and has a 15-position clutch. I use it literally every day and it hasn’t failed me yet.

[@coreyswann8735]

Once again, great work! Thank you for taking your time to do this!

[@ProjectFarm]

Thanks and you are welcome!

[@JimGriffOne]

Pink Power: _"You got a light? Oh, no worries. I found one."_ *smokes*

[@tomsawyer4776]

A brush motor, which don't last nearly as long as brushless, and don't handle high amps because of the brushes.

[@MAGGOT_VOMIT]

BigClive: "Did someone say Pink?..............one moment please." xD

[@cup_and_cone]

@@tomsawyer4776 They're all brushed motors in this test.

[@dancearoundtheworld5360]

@@tomsawyer4776 THE ONLY THING BRUSHLESS IN THE VIDEO IS THE LIGHT

[@Shadowmaster625]

that one needs to be disassembled to see what is smoking... maybe send it to bigclivedotcom

[@Snapshot3]

You've been completely crushing it, man. You're pumping out high quality content regularly, don't burn yourself out on us!

[@ProjectFarm]

Thanks!

[@jckrieger]

I agree. The pace of the new content is impressive, with no change in quality. Todd, if you read this, I'd love a video comparing taps and dies. My father's Craftsman set from the 1970s seems to be pretty good, but it seems the reviews on all the reasonably priced new sets are aweful. Is there a good brand for under $500 for a metric set?

[@DJKingZ2k7]

@@ProjectFarm you should do the Best razers for beard

[@YourAssAintSafe]

I'd stay away from craftsman heard they were bought out and moved production

[@apv5077]

No nonsense, quick reviews. First time viewer and subbed. Thanks, great format.

[@ProjectFarm]

Thanks and welcome! Thanks for watching and subscribing

[@jerryfinn1189]

A real and sincere THANK YOU for all this videos. You the best

[@ProjectFarm]

Thanks so much!

[@drew22]

My day gets a lot better when I see you released a new video. They are always quality.

[@aholesahole]

Legit

[@dirtbikevidz1548]

Samee

[@NiniCuzz]

I thought this guy was full of it when he said he reads all the comments and I’ve gone through so many of his vids and the bloke actually does, and he replies all the time. What’a champ

[@ProjectFarm]

Thanks for watching!

[@chronicblazer84]

He won't even reply to my comment about his flawed methodology, I guess you have to suck up to get his attention.

[@mattbrown3549]

@@chronicblazer84 - Flawed methodology? What was that?

[@chronicblazer84]

@@mattbrown3549 first torque is measured from the motor, not with extensions that change torque. Second RPM differs based on diameter sizes. Imagine buying a car with 600 ft-lbs of torque, and expecting the wheel torque to be 600 ft-lbs as well Also imagine buying a car that redlines at 7000 RPM, and expecting to get 7000 RPM at your tires. Which have to make up more 20x more circumference per rotation than the crank shaft. Then turning around, and making people believe the manufactures are wrong, because you don't know how to test properly, because no one showed you it... That is what this video is doing.

[@mattbrown3549]

@@chronicblazer84 - Okay, I get it now. Thanks.

[@mrsfireleg]

Another great vid. Just wish you had included Snap On. I use mine professionally every day for mechanical work, as opposed to carpentry which is mainly used in the forward direction only. The rocker trigger controlling the forward/reverse 😊direction for screwing and UnScrewing on the Snap On is the most used and convenient feature for mechanical work. Wish they all had that.

[@ProjectFarm]

Thank you!

[@evox786]

I have that snap on one as well with the forward/ reverse rocker switch and clutch. It has a NiCad battery so it probably doesn't perform as well as the newer lithium tools, but it has enough power for all my needs and has lasted 15 years and counting.

[@babakmbm]

This video was exactly what I was looking for. Thank you

[@ProjectFarm]

You're welcome!

[@SGAOuTLaWz]

Who in their right mind would thumbs down a PF video. One on the most honest guys on KZbin. Nothing but facts.

[@ProjectFarm]

Thanks!

[@bdanka50]

The Black and Decker fans 😂

[@andyp3834]

349 people accidentally hit the wrong button, 100 of them have a new mouse and thought they clicked the thumbs up, another 100 cant see the screen because their monitor is cracked right between the thumbs up and thumbs down, and the remaining 149 people are on crack and clicked on the thumbs down several times trying to clean a dirty spot on their new touch LCD screen they just stole at the park from some white guy napping on the bench right in the middle of mens and womens bathroom, but its closed because it's only April and everyone pees outside till July.

[@rachelblack3816]

He doesn't even make fun of the tools that should be made fun of!

[@jamesfrey6136]

Maybe they thumbs it down so they wouldn't be seeing this stuff in their feed? I don't know why anybody would. This is interesting at 12:00 midnight

[@AleksiJoensuu]

I know a fair few women who would be pissed off as heck at seeing a pink, subpar screwdriver being marketed for them... Then again my mom would buy it in a heartbeat.

[@balsamicvin9935]

lol, every woman i have ever known does not give shit about the color. That screwdriver is only losing marketing, because it deters the men.

[@Limited-uq2yk]

@@balsamicvin9935 bet the owner is a feminist

[@balsamicvin9935]

@@Limited-uq2yk agreed.

[@drasco61084]

@@balsamicvin9935 eh not really. Many products these days are not really made by a "good faith" (not sure what term would be more appropriate here) company putting out "their" product and hoping it becomes popular. Rather just some faceless company sourcing a generic piece of crap dirt cheap, slap some branding on it, just for the sake of making a buck off people who don't know better, maybe buying somebody else a Christmas gift or what have you. Many feminists are pretty critical of this type of marketing, including brands using breast cancer awareness and it being unclear how they're actually supporting sometimes (as well as just issues with non profit organizations in general). Coloring a product pink and calling it feminism is exactly the sort of cheap, ineffectual BS that the women in my community actually out there making change cannot stand. But individuals and companies will co-opt and water down anything and everything and try to turn it into a commodity, same goes for gay pride and many other things. Don't confuse the empty headed marketing for real movements.

[@balsamicvin9935]

@@drasco61084 you are right.

[@drewpierce7582]

I'm high af and this is peak entertainment

[@dirt_rooster36]

These videos are extremely important in my purchasing of tools for work. Thank you.

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@Root3264]

If I produced something that fairs well with project farm, I'd absolutely would put that verdict on the box!

[@ProjectFarm]

Thanks for the feedback.

[@JesseCombsTwiZtedCheese]

This is by far the best KZbin channel. Science grade testing in a matter that anyone can understand. Real life scenario testing, no BS brand bias. Seriously, good job man. Please tell us if you need extra income to supplement your testing costs

[@vincentguttmann2231]

And think of how he manages to make a "home shop" implementation of basically every standardized test, while still being consistent as one can be.

[@MrPhatties]

You can sign up to his patreon which is how all these tools get purchased. More patreons = more tools tested

[@ProjectFarm]

Thanks so much!

[@hellmancyber6963]

Just rediscovered your channel at the perfect time. I just started working as a contract cable installer. This video specifically is hy far the most helpful. The Worx screwdriver was a discovery for me and I'm probably going to get it purely for the screw holder as that will be very useful when I'm driving screws on a ladder.

[@ProjectFarm]

Thanks for sharing!

[@LokiDWolf]

This is probably the most fair and true test of whatever channel on the KZbins. I love it! I don't even need some of the products but I'll look just in case I do! LOL

[@ProjectFarm]

Thanks for watching!

[@AftermarketCRX]

Anyone else sitting here rooting on your favorite tool brand like its a football team?

[@johnd6980]

Yep, pink power all the way.

[@eugene66626]

Is that a rhetorical question?

[@Senkino5o]

No way, tools are for doing work, they're not different colored power rangers to worship like a pathetic consumer drone.

[@Jdbaughman1994]

@@Senkino5o people have preferred brands that they'd like to see prove that they're the best, from cars, to electronics, to wrenches, no point in getting offended by it.

[@phillipsofthedriver]

@@Jdbaughman1994 me, I'm kinda married to Milwaukee at this point. I'm not rooting for them on these tests (especially this one, being the only tool using the M4 battery, pheh to that). I own and use a LOT of M12 and M18 batteries, chargers, and tools. They all get the jobs done for my clients. I'm interested in where M places in these tests. This one specifically since I owned several NiCad Milwaukee screwdrivers (like the M4 version in this video) back in the 90's. I built a hell of a lot of desktop computers and servers then using those. Never used one on anything but #8 & #6 machine screws in computers, at low torque settings.

[@CloudMarshall]

Love your channel and the work you put into it. Lost my dad 10 years ago at a young age. You remind me of him.

[@ProjectFarm]

Marshall, Thank you very much! This means a lot to me.

[@CloudMarshall]

@@ProjectFarm me too. Every video you post it’s a comforting reminder of him and how well he was able to explain things in a way I could understand. Your channel means a lot to me.

[@grrinc]

🫂 prayers for your pa bro

[@CloudMarshall]

@@grrinc thank you!

[@jamms992]

Wow Todd is awesome

[@devonmcclanahan4458]

This testing is way more thought out than I had expected. This channel is awesome

[@ProjectFarm]

Thanks!

[@canman8362]

Love that these demos are up to date. 👍👍

[@ProjectFarm]

Thanks!

[@TheArsonsmith4242]

Your ability to read marketing slogans as if they were engineering specifications makes me laugh every freaking time. And I think I've watched every one of your videos.

[@mercoid]

Yes. It’s very funny because somehow it really drives home the absurdity of the manufacturer’s claims and boasting of their supposed cutting edge tech.

[@davidforrest8346]

"the Worx claims to be fully loaded!"

[@Justchuck69]

@@davidforrest8346 In Todd's voice ' We're going to test that ! ' :-)

[@ProjectFarm]

Thanks!

[@fengx9398]

KZbinr: I recommend Pink Power PF: We are gonna test that.

[@brandonevans4142]

Worx better watch out being "semiautomatic" Biden might shut em down

[@fengx9398]

@@brandonevans4142 We'd better start stacking up tools include gun in em, cause soon we couldnt buy any.

[@pflaffik]

Good news, this week battery powered angle grinders were used in hold-ups in Europes terrorist nest (Sweden). No need for guns.

[@apocalypse487]

@@brandonevans4142 I don't like Biden either, but what does this has to do with anything?

[@brandonevans4142]

@@apocalypse487 guess the joke was WAY over your head

[@danowolf]

Out of the box the Dewalt is hard to get used to. But once you are used to the gyro design its great. I use mine in server rooms and not having to remember to set the direction combined with the super slow(so you don't strip a screw) variable starting speed; It's a wonderful tool.

[@andrewjohnson9531]

I have the model tested in the video (DCF682) as well as the upgrade with the pivoting grip, clutch, and two LEDs instead of one (DCF680). Would’ve liked to seen the latter tested against the others, though the operation has the same specs. So helpful removing wall plates, light fastening, and drilling quick pilot holes without switching bits.

[@janstarr496]

I will definitely be watching more of your channel. I’m very impressed by how you showed so many different tests and features on 14 screwdrivers. The chart with comparison of features at the end was very helpful. But, as I was watching your video, I was hoping at the end you would do a complete comparison chart of all of the tests you performed. Other than that, your video is amazing. Now on to check other ones you’ve done…

[@ProjectFarm]

Thanks! Thanks for sharing.

[@rbalara31]

Her: Get off the computer and feed the cats! Me: Project Farm posted another video Her: If you don't get off that damn computer, you're sleeping on the couch tonight. Me: We're gunna test that.

[@rudygarcia1764]

😂😂😂😂😂

[@MCstrickG6]

You just made my day, thank you!

[@N.Cognito]

We're gonna see which couch is most comfortable.

[@tylersteez]

lmaoo

[@wadewells808]

Her: If you don't get off that damn computer, you're sleeping on the couch tonight. Me: Bring me my pillow and a blanket.

[@PJBonoVox]

Let's just take a moment to recognise that this guy sat for an hour running these screwdriver into a power drill. Dedication.

[@uhZeny]

@@MapedMod if it can last 5 minutes under hard load

[@uhZeny]

@@MapedMod I think it’s more of like will it survive a real day of work type of test

[@PJBonoVox]

@@MapedMod Go somewhere else then.

[@PJBonoVox]

@@MapedMod Salesman of what? He buys these products out of his own pocket. I think you meant 'naivety' by the way.

[@wachocs16]

​@@MapedMod And why not? He tested the SCREWdrivers in three 1'1/4" screws. A typical work for those drivers But why he can't test them with a bolt? Why I can't see if that little screwdriver can smash a foot long bolt into the wood? Spinning that drill is just an easier battery test than screwing 100-200 individual screws into the wood. With that, he can just stand there for 5 minutes easily testing the tool I wouldn't buy a tool that catch fire or doesn't have battery after a minute of full load It's like testing the fuel range of a car. Why would I care if I live in a city full of gas stations? But maybe, once a year I need to drive 600KM without fueling

[@thagerdorn2009]

PF, ive been watching you since you had 1k subs, and that's no lie! You were one of my favorite channels from the start and it just gets better. Thank you for your hard work and dedication and spending money out of your own pocket to test things for us, even if that means ruining stuff.

[@ProjectFarm]

Thanks so much!

[@Elnamech]

A lot of folks have mentioned this but I might as well pipe up, too: after getting over the initial weirdness of the Dewalt I have become so used to it and the gyro control that anything with a forward/reverse button gets on my nerves. I have had mine for a couple years now and use it for everything. While I am here I want to thank you for all the effort you put into your review videos. They are honest and well-designed tests that I think are some of the most reliable reviews on the internet, not to mention entertaining to watch. Good work!

[@ProjectFarm]

Thanks and you are welcome!

[@andie_pants]

Just when I was about out of excuses to stall on going out and mowing the lawn... Project Farm saves the day with a new video!

[@ProjectFarm]

lol Thanks for watching!

[@EclecticLensYT]

Thanks for doing all the hard work you do!

[@ProjectFarm]

You are welcome!

[@benpierce8137]

I have used the TECCPO for a couple years now at home. I only use it on electronics projects and smaller things around the house. It handles everything great and the bit selection has covered most things I've needed it for. The carrying case was a big selling point for me. I have full-size drills and impact drivers for bigger tasks. I rarely need to charge it. This screwdriver is a great bang for the buck tool.

[@ProjectFarm]

Thanks for the feedback.

[@giorgospap7615]

This guys does better research than most of my colleagues at the University

[@ProjectFarm]

Wow, thanks!

[@ZYNGA_]

Πόσο ισχύει αυτό ρε φίλε?! Ο τύπος κάνει τρομερά βίντεο

[@blakeeb3318]

@@ZYNGA_ iuiiuu77u7u7u77u7u77hyhyhyhyhyy6y66yhyyy7u77y7y7y7y7y7y7y7y7y7y7y bu8ytuthghghghkhkghkghykghghghghghghghghghghghghghghgkghkghgkkghjgkkgkghhglkghgkhgkkg

[@chronicblazer84]

No he doesn't...

[@giorgospap7615]

@@chronicblazer84 you must be the soul of every party. Exaggerating is a mean of emphasize

[@Cartier_specialist]

I thought for sure the NoCry would make me cry but to my surprise it lived up to its name and NoCry for me.

[@ProjectFarm]

lol. Great point!

[@LightningJR]

They should make a NoCryEver for $50 and include a led light and locking bits.

[@nocrygear]

Thank you very much for your kind words! Should you need any assistance, please send us a message!

[@jacklets3851]

This is the exact type of video that I was looking for. thanks man

[@ProjectFarm]

You are welcome!

[@shacar8310]

Love your video. Thanks for all the work you put into it.

[@ProjectFarm]

Thanks and you are welcome!

[@iLL3571]

Damn this is actually testing, unlike that channel that just puts tools under a hydraulic press. here you have all the specs, brands, materials, price, where are they made, etc. Very useful. Subscribed!

[@ProjectFarm]

Thanks! Thanks for watching and subscribing!

[@skygiu]

the other channel was never intended to test something because you can test only the hardness with a hydraulic press.:)

[@HeWhoIsWhoHeIs]

Agreed. We don't deserve Project Farm. Very grateful for this channel, I make a LOT of purchase decisions based on his testing.. In fact, about 90% of my workshop is filled with tools based on this channel and Stumpy Nubs' channel.

[@RunninGunner04]

If you ever want to know testing about impacts or wrenches or torque in general, watch the torque test channel, they are amazing

[@paulstubbs7678]

I was kind of hoping at the end, loading up into that mains drill, that he didn't power it up and run them all to destruction.

[@lmaoanatorhilarious2582]

The only tool guy on KZbin that doesn’t bullshit or sell out

[@rovcanada1]

Erm ... you forgot AvE. He is the epitome of no BS or shill

[@ProjectFarm]

Thanks for watching!

[@lmaoanatorhilarious2582]

@@ProjectFarm No, thank you for putting out all this great content! We don’t deserve such a genuine person like you!

[@jttech44]

@@rovcanada1 Which funny enough is how I found Project Farm back in the day.

[@rovcanada1]

@@jttech44 Same story here! There is not a purchase I make without 1st checking Project Farm's reviews. My last purchases were wood glue and a chain saw chain, both of which I'm eternally grateful to PF for pointing me in the right direction.

[@brucemoriarty9964]

A great fair test. Ya can't get more honest testing than this one as well as ya other videos. Thanks for the tough work you do.🙂👍

[@ProjectFarm]

Thanks and you are welcome!

[@bobbymele9057]

One of the best reviews I’ve ever seen. Thank you sir

[@ProjectFarm]

Thanks and you are welcome!

[@gvi341984]

Time to watch the best part of Sunday

[@ProjectFarm]

Thank you very much! This means a lot to me!

[@zoogoo404]

I know a builder that has nothing but pink tools. His excuse was 'Doesn't matter if it's crap, ever seen someone steal a pink tool? Even if they break it's a hell of a lot cheaper to replace.'

[@pvic6959]

true lol. but i have one question... why is the pink one even gendered. its very pointlessly gendered lol. women can use any tool

[@NoTimeForThatNow]

@@pvic6959 plus it’s expensive and not worth it. So they are actually abusing women.

[@JoeBidensBicycle]

I painted all my tools pink for this very purpose. Haven't "lost" a tool in almost 2 years.

[@NoTimeForThatNow]

@@JoeBidensBicycle 😂🤣😅

[@roccit]

@@JoeBidensBicycle I love this!

[@MontanaTactical]

Outstanding testing! Thank you.

[@ProjectFarm]

Thanks and you are welcome!

[@jacksbrewbaker4300]

Ay yo i randomly stumbled across this video on my recommended and then saw who it was by. I subbed on my old account and I changed accounts and didn’t remember who I was subbed to. I’m a fan of your videos and you also got me through a science fair.

[@cdbtheclaw]

I like the clever design additions on the WORX. The quick change bit magazine and screw holder can come in really handy.

[@RossMitchellsProfile]

Yeah, that stood out to me as well. I elso enjoy that the top of the WORX makes it look like some sort of scifi gun.

[@consultantferret9389]

So the quality and battery lasting. But in this video we can see the wright and actual.... respect with the consumer... NONE...

[@curtwhite876]

When the Project Farm guy announces he's going to have a yard sale, I will binge watch every episode and then hit the road to get in line. Great stuff as always.

[@ProjectFarm]

lol Thanks!

[@pvic6959]

nah hit the road first and then watch the vids. if you watch them first, the line will be 10 miles long!

[@haciendadad]

Another impressive battery of tests. Great video!

[@ProjectFarm]

Thanks and you are welcome!

[@aladus]

Great video! Never thought all these variables were important in getting a screwdriver. Thanks for sharing

[@ProjectFarm]

Thanks and you are welcome!

[@ajs96350]

"We're gonna test that" " "Manufacturers hate him, see why tonight, on Project Farm"

[@ProjectFarm]

lol. Great point!

[@hanyoukimura]

"We're gonna test that" is like when My Mechanics says "I make a new one". That is to say, the catchphrase we forward to hearing in the video.

[@wademichaels3327]

I’m waiting on the “PF farm approved” rating on product packaging..😂😂

[@ProjectFarm]

Thanks for sharing.

[@classydays43]

I don't think PF approves of anything, but he gives viewers the option to choose based on the results of his testing, which isn't exactly a recommendation, rather an open suggestion for us to choose for ourselves. A company would have to keep its words carefully because any one of us can go and see the tests being conducted for ourselves, rather than the old days of pretending that the market jargon of "independently tested" without context means anything.

[@andrewxt5812]

@@classydays43 Exactly. Part of why everyone loves his videos is because he's unbiased. He doesn't usually give strong opinions outside of the casual "wow that did bad" or "wow that did better than expected" I love it because like you said, he gives us the info to go ahead and choose for ourselves. We can compare each brand/model to find out which one suits our needs best.

[@Ziphoroc]

Project Farm farm? Almost as bad as when people say ATM machine or PIN number.

[@NA-pg4lf]

He won’t ever sell out like that

[@toenail]

such a perfect review video, great job!!

[@ProjectFarm]

Thanks!

[@carlgantz2397]

Once again your awesome videos are informational packed and help emensely with making a decision on a particular product . Thank you so much

[@ProjectFarm]

You are welcome!

[@MetalMaggot46]

It's awesome to see that PF actually takes suggestions! I am by no means the only person to request this I'm sure but that's awesome! No one actually engages with their audience anymore

[@ProjectFarm]

Thank you! 100% of the videos are viewer requested. I ran out of video ideas 2 years ago. lol

[@dalebabbitt6185]

Holy crap, I never knew there were so many brands of these things out there. Thank you for taking the time to do these videos for all of us.

[@ProjectFarm]

You are welcome!

[@spicydramarama852]

For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life. John 3:16

[@kopilkaiser8991]

Great knowledge to know about these area of automatic screw drivers. There are so many of them and you have helped me to decide one. It was really great of you to put so much effort in making such a useful video. Hands up from me and my best wishes for your wellbeing.

[@ProjectFarm]

Thanks so much! Glad to hear!

[@joemawa7657]

One of the best USEFUL Channel on KZbin !

[@ProjectFarm]

Wow, thanks!

[@gsymdzd1]

100k views in 3hours! Just amazing the job this man is doing. Keep going 👏

[@ProjectFarm]

Thank you very much!

[@electro1622]

Seriously man, send a few of your video's to TV stations, you are far far better than anything they have...

[@ProjectFarm]

Thanks for the nice comment!

[@britishmgtow7251]

agreed

[@YOEL_44]

He's probably better out of the mainstream media, I know how that has worked for others and they didn't end better than they started

[@notablediscomfort]

I feel like this would actually work with PBS. Have like a sunday mini-marathon every week, just 2 hours of Project Farm in the afternoon when everyone is digesting lunch or getting home from church, whatever their routine is.

[@firewoodsteel]

And again you came through for me and I had asked about this in another video not knowing... THANKS!!

[@ProjectFarm]

Thanks for sharing!

[@DoRC]

I have three of those no cry screwdrivers. I wanted variable speed and a clutch for working on RC cars and they've all been great. I had one that died about a month after I got it and they took care of me no questions asked. Great screwdriver and in my experience great customer support!

[@ProjectFarm]

Thanks for sharing.

[@dirtrider88]

i know this is an old comment but if you want the best screwdriver for RC cars get the dewalt. been using one myself exclusively for RC cars for a while now and love it. they even have one with a clutch that wont strip out the tiniest of screws except for maybe 24th scale stuff. i use it for my b6.4, capra, kraton and lc12b1 and its perfect.

[@easyybreezeyy]

I love how you always get straight to the point and only say the important stuff. Very cool video!

[@electronicsNmore]

You gotta love some of the Chinese tool names, "NoCry". LOL. I love your torture tests. Many hours, and days went into this video. Great job!

[@fatcontrole1]

An odd brand that I've got a few tools from, including paint sprayer. Pleasantly surprised but them, and their English instructions are pretty much spot on

[@electronicsNmore]

@@fatcontrole1 They must've been smart and hired someone in the U.S. to write the manual.

[@MadLadsAnonymous]

They're an Estonian brand, not Chinese.

[@fatcontrole1]

@@MadLadsAnonymous Good to know 🙂

[@fatcontrole1]

@@electronicsNmore no, the English is too good to be American 😉

[@vp100]

I am just amazed seeing all these different tools you use to test

[@ProjectFarm]

Thank you!

[@OldSkoolF]

Keep it up.... Love your attention to detail.. And test creativity!

[@ProjectFarm]

Thanks, will do!

[@MichaelZelivetz]

I really appreciate your editing. You cut it so tight; just pack it with great, well thought out/clever testing methodology. So far, this is my only YT sub where I also ask for notifications. Always want to watch as soon as it's available! One of the best KZbinrs out there!

[@ProjectFarm]

Thank you very much! Thanks for watching and subscribing!