Best Tile Cutter for ALL Tile Montolit Masterpiuma P3

Review: Montolit Masterpiuma Evolution 3 Push Tile Cutter 24".
Link to Montolit P3 Manual Tile Cutter amzn.to/2CGFooL
Tools we use: www.amazon.com/shop/landbergt...
T-Shirts: represent.com/store/landberg-...
Big Shout out to Soundcloud artist Skyline
Click below for my other videos!
Best Tile Saw for the Money? Dewalt D24000 Review
• Dewalt D24000 Tile Saw...
Ridgid's NEW Tile Anti-Lipage System - Game Changer?
• Ridgid Level Max Tile ...
Click to Subscribe!
/ @landbergtiletv
Thanks for watching!
Details:
-Titanium wheel included (special for porcelain tile).
-Breaker feet are made of special non-scratch plastic.
-Sprung tables for safe tile splitting and extendable support rod for large-format tiles.
-Patented die-cast aluminum plus nickel-plated steel.
-Tile splitting is done by the same cutting handle.
-Adjustable square is completely recessed into machine perimeter, is equipped with a double 0° and 45° scale and with a specially-designed reference notch which allows for precise, rapid measurement of cuts in either a clockwise (0° to 75°) or counter-clockwise (0° to -45°) direction.
-Support feet are made of non-slip scratch-proof rubber.
-Compact and light weight Adjustment for thicker tile up to 1” thick.
-Spring loaded table and foam extension pads provide impact absorption to reduce broken tile.
-The cutting wheel is mounted with a pin that can be easily tapped out for quick and effortless wheel replacement. #tile #howtotile #installingtile

[@seanmorrison9973]

Absolutely love this cutter. Have had it few years now, and has never let me down. Didn’t even know about the storage area. Lol, thx. Could you do some tests on the best hole saw cutters and also bits for glass tile. I always make room for plug and switch plate finish cover screws, which have to be very precise cuts. Recently an electrician told me not to worry about those screws anymore because they can cut them down to not hit the tile. Now that’s great I thought, but only if the electrician is coming back to do this work, which he did not. There is not a lot of play on top and bottom set plate screws, especially when they are very tiny glass tiles, they tend to crack or chip. Give it some thought because I think a lot of pros would appreciate the knowledge. 30 years in the flooring business and we all can continue to evolve in this trade. Thanks to your videos. Cheers. Kept watching your videos while I was writing this, was supposed to be in the Montolit file.

[@JohnSmith-hl4bb]

Hi honestly you are very good at tiles work. I can tell you learn all by yourself.

[@badopinion]

I have the older version. Great tool, only wish I’d bought the larger one. 15 years ago 18” was fine, not these crazy long tiles nowadays!

[@juliopluma3385]

Love that cutter. Thanks for you videos

[@ericstarin8195]

Sold me! You should get a kick back for sales bro. Great demo!!

[@sq8279]

I just bought the 63P3 version and put it to use this morning, my god it is a beast and saved so much time over my electronic table top wet saw. I’ve cut some large format textured vitrified tile, thick large format porcelain and thin bevelled ceramic tiles and all have been great. Keep up the good work with your reviews👍

[@angrypops897]

I'm looking for that big Momma lol how much did you pay????

[@sq8279]

@@angrypops897 £250 + delivery

[@mileshandy1806]

What a great bit of kit I need one of these good video 👍

[@LandbergTileTV]

thanks!

[@samsingh2042]

I just got the 125cm cutter today, love from uk

[@douglasirving8417]

I have a Rubi TXN 37" model and I'm used to seeing the blade especially when I mark the tiles with my sharpie ....how do you see or line up the scoring wheel with a 1 bar cutter ?

[@Louthemailman]

i have a 29 inch montolit and a 36 inch sigma. both are equally good. only thing i like about the sigma over the montolit is the sigma has a cutting arm on both sides that support larger tile other then that they both cut the same

[@ripushgupta7205]

That’s the best difference explained 👍🏻🤣💐

[@Fldavestone]

Almost 40 years in tile i threw two Montolits in a dumpster 10 years ago when large porcelain tile came into being,

[@tommurphy6058]

when you test cut 12 X 24 tiles you always cut them in half then in half again is it possible to take 1/2” -1 1/2” off one side of the tile and still get a clean cut

[@Contractorsdirect1]

These tile cutters are great and the industry knows it. They are in very high demand!

[@LandbergTileTV]

We definitely love ours!

[@evillemonkey]

Uh huh, i see what's going on here.. *wink *wink...... Someone hook me up here in Florida :D

[@pasqualeparente9776]

I have used a Sigma but I own a Montolit and must say that the Sigma you have to lift the handle almost like pushing backwards and pull at the same time. Just a little uncomfortable, until you get used to it. When I first started to use the Montolit I found it awkward to cut in the pushing direction... But let me tell you , it is simpler to use because with little pressure you push forward and down in a very comfortable position. That is the biggest difference otherwise the single pole that some think is superior, well the Montolit has the same single pole construction ...

[@christiantruthmatters]

Your talking about the sigma pull handle 🤔 you do know that sigma do push handles too just like the monti

[@Pri79111]

Does anyone know what's the adjuster with two small screws with arrows that is located on the handle for?

[@tonyp9609]

Looks like a good cutter but I will keep my Sigma. Great video, Thanks

[@IMABEAST191]

Great video man. I love single bar tile cutters push or pull they Are the only cutters I buy. They are powerful and out muscle all snap cutters. I prefer sigma since they are built like a tank and last forever..... but I would definitely prefer a montolite p over a shitty qep or Rubi yuck.

[@LandbergTileTV]

Thanks for kind words! We love this cutter for sure!

[@Contractorsdirect1]

Have you been able to demo the new Rubi TZ cutters?

[@syedshams6267]

I like Rubi (Spanish brand). All the machines are very heavy-duty. but i love TX MAX 1020.

[@78sdm]

Nice👍

[@TheTechGuider]

are the blue parts plastic?

[@darienduranza1874]

What about the ishii red turbo tile cutter ?

[@askthisoldtileman5401]

You might want to try there nippers.price is about 40 .they cut real clean. Keep up demos, you did wet saw demo. It’s seems you been doing it tile for a while. There was a wet saw call carver. Best saw in planet. It was pricey.but for some reason they stop making it. What a saw.keep up good work.there few and far between good tile setters like yourself.

[@maria617]

I was not impressed with the smoothness of this cut. Do you know if there's an extra tool that can be used with this unit (or another cutter) to make that edge super smooth? Like, out-of-the-box smooth?

[@arditosmani421]

kaufman tile cutter is good too ive been using it. if you can make video with that manual tile cutter it would be so good 😊

[@LandbergTileTV]

Great idea! I'll add that to the list 👊

[@kenanbasic3823]

I have Masterpiuma p3 93 and have problem with square about 1 mm

[@Toolstilediy]

I need on of these!!

[@LandbergTileTV]

It's an amazing machine! A little pricey, but worth every penny!

[@gurib7985]

Landberg Tile DIY TV Where can I buy it?

[@Art416]

@@LandbergTileTV why would you choose this tile cutter over sigma?

[@Strictlydt]

Hey Landberg I was wondering how you went with cutting tiles dot to dot? I cut straight to the wall and some plastered walls are out which forces me to mark out straight cuts. I usually use a Sigma and I can see the blade but with a Montolit tile cutter I'm struggling to hit the marks on one or both sides.. Any info will help.

[@LandbergTileTV]

Hey DT, we do cut "tapered" cuts with this Montolit and never have problems. I do hear from other people that most can see the Sigma cutting wheel better than the Montolit. I would assume practice and time will help your issue. Wish I could be more help, thanks for watching!

[@mr.wizeguy8995]

You align you marks to that ridge below tile, scoring wheel is directly over it then move handle over tile and make score and cut.

[@BrianJones-cu2sx]

Would this cutter suffice for show cuts butted up against Schluter Rondec? It’s tough to move away from the clean cuts of a wet saw

[@LandbergTileTV]

definitely need a wet saw for that sir 👊

[@treystills]

Great video thanks for sharing! Noob question...what the advantages of a manual cutter verses a saw?

[@LandbergTileTV]

Super quick to set up, quick to cut, small for small spaces and not messy with water.

[@LarryDepontes]

clean up, set up, cold weather, less crap to haul around, have the cutter very near your work area

[@thomaskelly2572]

This machine suits the US market bright shiny and nice colors . Never really took off in European countries as Sigma is the real deal .

[@djfglobal3377]

Just got a sigma 26, so far so good . I didn’t buy it for the colors but it is aesthetically pleasing 🇺🇸 cheers!

[@royvandersteen8829]

I'm from the Netherlands, and I see 95% of the cutters being from Rubi. Search it up if you don't know them.

[@stephenoneill258]

You know

[@jankowalski-pv1nt]

Yes yes sigma od montolit.i have sigma and Montolit cut is the same.hovever we buy sigma or MON.. cut be great and we been happy working..

[@LandbergTileTV]

Yes, they are both great cutters! 👊

[@brianwalter2334]

Where do I buy it?

[@victoria653]

I own this cutter and i like it. Its Very Well built. Although i do prefer my Sigma Cutter. The nice thing with the sigma cutter i can see and have more control over how the wheel cuts the tile for precise cuts.

[@LandbergTileTV]

+Johnathon Wheeler I've never owned a sigma, but will need a new 36" cutter soon. You should make a video on that cutter. I'm sure we would all like to see it!

[@Contractorsdirect1]

Do you prefer the Sigma Max Push or their classic Pull Handle style?

[@victoria653]

way prefer the pull. i think the push might be better for super large tiles

[@Louthemailman]

i have a push handle and a pull. i prefer the push alot easier

[@victoria653]

reindeer games 4 large tiles to push works well but if you're doing Precision Cuts on small tiles the push does not work well besides you can't see what you're cutting with the push that well.

[@MrKEErickson]

I just bought one of these beauties a few months ago. Thoughts on the oil reserve? Do you refill yours or buy additional ones?

[@LandbergTileTV]

We used it for two full bath/shower remodels and really see no use for it yet. It cut everything clean and straight without problems. I'm sure there will be a time when we cut that cap and use it! Thanks for watching! =)

[@k_nardonecustomtilework]

The oil is good to use when cutting textured materials.

[@neilhuband995]

Refill it with wd40 yourself. Not sure it does any more than just giving the wheel an occasional spray of wd40 from a can though anyway

[@LarryDepontes]

cheap 3 and one oil works also just apply it to the wick

[@briangriggs7651]

Will it cut 20mm porcelain

[@kojomensah7474]

How much did it cost??

[@LarryDepontes]

my only complaint is the ruler below 2 inches is tough to read

[@lizmiddleton2382]

Lovely cutter but can you cut Moisac glass tile with it??

[@LandbergTileTV]

Yes you can!

[@StarrTile]

Nice ! What's the cost ? Also LOVE the drone shots of my native California ;-)

[@LandbergTileTV]

We got a deal on this one, but runs around $400ish...getting a little better with the drone! a little tricky when dealing with lots of power lines!

[@carlosgarzia8176]

landberg Tile TV how can i order

[@sergiorangel5226]

What is the smallest they make in this brand. I have been installing a lot of subway tile here lately. thanks!

[@LandbergTileTV]

Here is the small version kzbin.info/www/bejne/qqHNaXmim5eYg7s

[@neilhuband995]

I've just bought a montolit 63p3 thanks to videos like this one. It arrives in 2 days time. The best cutter I've ever used for subway tile is the Rubi ts30. It's the only Rubi cutter that I actually like, but it's amazing on subway tile, I can't imagine a cutter any better for the job, you need to try one for yourself to see. I've used the bigger ones a lot too, ts50 and ts60, but I found that they're hopeless on porcelain, they're just not rigid enough nor have the breaking strength to break them.

[@Dtileandremodeling]

I own two of them.A 49” and a 12”

[@LandbergTileTV]

Right on! I have a video coming up soon "Saturday" with comparing a Sigma 14" vs. a MD cheap Amazon 14" tile cutter. Stay tuned! 👊

[@absolutemalmaute9592]

For a DIYer, which tile cutter do you think would be good? I’m not sure how long the blade lasts in The cheaper tile cutters, and one that cuts through porcelain like butter. I’m doing my 735sq ft basement in porcelain so need something that will last and cut like butter but not break the bank. Maybe $150-200

[@mayassa58]

What size is that one?

[@LandbergTileTV]

+mayassa58 this is the 24inch

[@scottyp625]

I’ve seen enough of the “sales demo” videos for this cutter. I myself bought this cutter months after it was released. I’d like to see, actual day in, day out, tile setters opinions on this cutter. Is is a good cutter? It sure is. Is it the “magic cutter” the sales videos make you believe it is? Well, actual tile guys, let’s hear it…

[@michaelbogaski83]

I'm a tile setter and I love it. I have the 25" montolit. Guys I work with have these or sigma. The guys that like the pull cutting boards have sigma and the guys that like the push have montolit. I think it's more personal preference between those two brands.

[@freck9326]

what about a heavy textured tile?

[@LandbergTileTV]

Yes, it will cut that.

[@Dumigu]

it's a great tile cutter, but I like sigma more

[@RonSnayberger]

Will it work to cut glass.

[@LandbergTileTV]

Yes, we cut glass mosaic with montolit's rubber mosaic cutting pad you lay on the cutter table.

[@sebastosca]

Ron Snayberger .is the way to cut glass tile

[@nexhathalimi476]

nothing beats sigma not even close

[@Arnidze793]

What about RUBI TX MAX series?

[@LandbergTileTV]

I'll add that cutter to the list of reviews

[@evillemonkey]

Flip the gauge out of the way without losing my spot..... take my money.

[@thaikarate1]

over $300 too much for DIY like me. Like it though

[@user-qg4hl4fx6h]

Крутой аппарат У меня 93р3

[@user-rn5tw3di4t]

И как он ? Можно маленькую плитку резать ? И резал ли ты крупный и толстый керамогранит . Глянцевый и матовый. ???

[@thomaskelly2572]

The yanks love these cutters, here in Europe sigma is more popular and for good reasons. Sigma design is international patent and many companies especially in italy have tried to better there concept but failed miserably, including montolit, nice looking machine,! I guess that's why some people buy them. I've been fortunate to have worked alongside some of the best tilers from Germany italyand Portugal and every one of them have a sigma, so that sums it up right there

[@LandbergTileTV]

I have a Sigma cutter video coming up soon! I hear a lot of good things from the Sigma cutters. We will be adding one to our tool arsenal soon! 😎 I appreciate the comment Anthony

[@BMan-up3qj]

I'm the best tiler in the world Monty is better than sigma lol

[@professorkaos2781]

@@LandbergTileTV Im shocked that you review tile products and don't have personal experience with sigma cutters. They are the staple of the industry! Maybe you should review products that you are more suited to your skill and trade.

[@professorkaos2781]

@@BMan-up3qj my dad is stronger than your dad

[@davidrutherford3345]

There's never one review cutting to marks on the tiles and every cut is to marks.. There's a wheel stuck underneath and no mention of visibility..

[@vjekoz1753]

The main problem with this cutter montolit is this mashine is for lefthanded, and measuremant is far from eye sight, you push handle thoward mesuremant. Measuremant is split in thre parts visibilty 1, 2, 3, 4, 5, 6 cm is not good. I think sigma is much more simpliest and beter cutter.

[@bogdan.1721]

is better sigma to sigma you can adjust the bar on which the handle goes and the depth

[@angrypops897]

32yrs Setting I've finally found my Baby$$$$

[@CRASS2047]

I think multiple passes on travertine would cut more consistently

[@TileCutter-video]

Добрий день. Досвід показує, що Montolit гарний плиткоріз. Але потребує навчання і звикання. Мною доведено, що Montolit поступається Sigma MAX і Rubi TX. Тому він гарний, але не найкращий.

[@ahmedahmedzaidi7178]

Do you have the magnificence of being able to reach my goddess

[@LandbergTileTV]

Love it

[@stephenoneill258]

The measurement bar and I will continue to say it is too weak ,bends ,goes out of accuracy when you hit it with your foot ,

[@stephenoneill258]

Bad points which were not said ,weak measurement bar, support bar for large tiles irrelevant, hard to see marking on tiles due to being a single bar cutter.breaker a little soft due to being plastic .no cutter is perfect .just some advice for the montolit engineers

[@stevemccloskey5730]

They fixed most of that with the P5 (and raised the pricing quite a bit). Still has the issue with difficulty lining up a mark with the bar in the way. Ishii turbo jet has an I-beam with a hole in it you can look through, and great side arms.

[@catalincasian1857]

Sigma its still the Best

[@LandbergTileTV]

Sigmas are great cutters!

[@maria617]

Hummmm. The edges look a little jagged to me. Every tiler I've ever used has had trouble getting a smooth edge and it's no small issue (from a homeowners perspective). The jagged edges show even more once the grout is applied because the grout seeps into the crevices. This is especially true for porcelain subway tiles. How is it they are so smooth out of the box (do the Chinese have a giant smoothing machine they run all the tiles through before tiles are boxed and sent here?) It's a pure wonder to look at a simple bullnose tile and marvel at the smoothness.

[@daniels7458]

use a rubbing stone to finish cut

[@Ralexrauda]

Jajajaja, la mejor del mundo?? The best forever is sigma

[@williamsauder1823]

You buy all the cool shit

[@LandbergTileTV]

I love tile tools! Always looking for something new to review, any ideas?

[@klaustzoca]

Sigma brand is better in my opinion.

[@thomaskelly2572]

Sigma tried and tested by most of us Europeans for over 30 years . By far the most reliable and hard warring machine , nothing comes close . Montolit which make for raimondi are too fiddly and prone to breaking also the oil issue of replacement is ridiculous , Wd40 on the sigma and your done

[@LandbergTileTV]

Yes sir! Sigma makes great tile cutters as well!

[@BMan-up3qj]

I don't know man I had a sigma for 15 years and I bought a montolit 5 years ago and I'm never going back I love my montee 5 years doing porcelain tiles every day and I'm still cutting with the original wheel . Once you get used to this cutter it's super fast

[@liluterKA]

So tell me why my wheel in montolit 93P3 after short time start to turn verticaly and it cause problems in cut. Now it was stole and I wanderig to try sigma is there any problem with wheel ?

[@darekjaskulski3375]

@@liluterKA I'm pretty sure there are two types of weeks. Silver and gold. Gold is better.

[@liluterKA]

@@darekjaskulski3375 miałem złote kółko...

[@hilmokuc2117]

Schrott

[@bigdogg9644]

sigmas are better

[@jbjoe249]

I give you a dislike for this... Sigma lover here. 😁

[@LandbergTileTV]

lol, Sigma is great also!