Brother Printer MFC-J1170dw MFC-J1010DW MFC-J1012DW - Printhead Cleaning - Not Printing FIXED

[@BestPrinters]

Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT Brother Ink 👉 geni.us/7xMHJB Expedited Printer Support 👉 geni.us/BPChannelMember

[@MrGiffin]

It worked for my brother mfc j4440dw. Saved $100+.thanks heaps

[@mrmsmcgill]

This worked like a charm on my Brother MFC-J4420DW. Very clear, concise and complete instructions. My black nozzle is clogged no more.

[@BestPrinters]

Awesome!

[@HimanshuGupta-ex4yq]

Worked like a magic.

[@sylvaro1]

Amazing video ! Thank you so much ! You saved my MFC-430W. Bought it used and it wasn't able to print anything before I did this cleaning.

[@BestPrinters]

Great to hear!

[@sergeygaiduk5246]

I had a blank pages after not running my MFC-J1205W around 6 months. Today I've just applied 20 times "maintenance -> clean print head cleaning -> strongest (sometimes "normal")" with checking print quality after each cycle and it works. Will see how long 🙂

[@orlilow]

Thank you! This worked for me too!!

[@arjungupta-inventor-iaq]

Hey this totally worked and fixed my print issues. So thanks.

[@BestPrinters]

Awesome!

[@arjungupta-inventor-iaq]

Do you have a method to clean the print head cleaning mechanism? Does it need to be cleaned?

[@thebashmann61]

Hey , bought and used your Printhead Cleaning Kit and it worked. However, the only drawback it cost me an additional pack of cartridges of black and colors. Oh well, it's still cheaper than buying another printer and will do for now , but my next purchase will definitely go to the EcoTank line from Epson, it looks like it's the best way to get away from expensive cartridges system and save money. Thank you.

[@BestPrinters]

Hi I'm glad that you had a good experience with the best part cleaning kit. Yes it is unfortunate that you have to buy new ink however, you do get the usage out of it so it's not a cost that goes to waste. Thank you for leaving a comment appreciate it.

[@paulroberts729]

Worked like a champ -- thanks for posting this.

[@BestPrinters]

You're welcome!

[@sommerjmm8532]

Good video and clear instructions. However: do mention that you must not apply to much pressure as some components of the printhead are soft plastic material bags. Using to high pressure may damage the bags.

[@BestPrinters]

Great point!

[@YudronWangmo]

I bought the stuff for cleaning the print heads, then stumbled on this video before I had a chance to do it. Now, there is no need. Problem solved on the first try.

[@BestPrinters]

Fantastic!

[@Aprilblue529]

if this didn't work at all what would be the other cause? I did all the cleaning as this video shows, but still printing a complete blank page.

[@reggientv310]

too many to consider, it could be the flex cable, ciss hose, purge unit, printhead or worst logic board.

[@Cielboreal]

hello Thank you for your tutorial. I purchased a product identical to the one you present. I followed the instructions. but there is a problem when I push on the syringe the liquid comes out through the cartridge inlet nozzles. I can see the circulation of the ink very clearly in the pipes but everything comes back to the cartridge access and almost nothing comes out through the heads. Do you think this is normal and what do you think is the solution?

[@rahdouneismail2758]

You make it easy, thanks

[@BestPrinters]

You’re welcome 😊

[@MarthVaderxvida]

Great video. What happens if you don't replace with new cartridges?

[@BestPrinters]

You may have the same problem again.

[@Honestcritic79]

I purchased it but none of the nozzle pieces you provided fit my Bother MFC-J995W. It doesn't have the heads that your printer have. Mine have a tiny hole but then are surrounded by a larger circle on the outside.

[@BestPrinters]

Yes, in this case, you may want to just use the silicone tubing already attached to the syringe.

[@specialprojects7504]

I have a question. I have a Brother MFC-J5520DW and I tried cleaning the nozzles the same way you showed by plugging a tube onto the ink intake port, except I used warm water. My Cyan was the one that was the most clogged and when I pressed the syringe not much was happening, only a tiny bit of Cyan was coming out onto the paper towel, then all of the sudden all the water from the syringe started squirting out of the Yellow intake port while it was plugged into the Cyan port. I played with it a little bit then water started coming out of the Magenta and Black ports... Is that normal, or did I brake something by giving it more pressure?

[@BestPrinters]

No, everything should be OK. Try warming up the fluid and reapplying.

[@valerestas5627]

Best, I have a Brother DCP-J4120DW and I cannot move the printer head to collect the flushing fluid. How can I reach or move the print head?

[@BestPrinters]

Print a report and unplug the printer while it is actively printing, that will leave the printhead loose and you will be able to move it.

[@WaschyNumber1]

Brother DCP-T510W Printer Does the printer have not a mode that's clean every day the heads themself, so that's the ink don't dry out?

[@BestPrinters]

the printer goes through a standard process of keeping all the parts moving but many times that does not prevent clogs. The best thing you could do is print frequently.

[@WaschyNumber1]

@@BestPrinters thanks

[@radhishwan4869]

Thanks for sharing Sir

[@BestPrinters]

Of course!

[@lorcutt100]

Do you need to flush all colors of ink or can I just flush the one that is problematic?

[@BestPrinters]

You can just flush the problematic color.

[@clivehenry6131]

Nice job you did that perfectly

[@BestPrinters]

Thank you!

[@khinekhine613]

Do i need to dip the syringe in hot water? to prevent the clogs in the future, how often do i need to print? thank you for the helpful video.

[@BestPrinters]

If colors come back without warming the syringe then no need for hot water. print frequently and check ink frequently to prevent this issue again.

[@lacsa727]

Hi... will this kit work on the MFC J885DW Printer?

[@BestPrinters]

Yes

[@jamilahussain9652]

Very helpful thank you

[@BestPrinters]

You're welcome!

[@arjungupta-inventor-iaq]

Thanks!

[@BestPrinters]

Thank you!

[@sherriruedas9660]

I have a brother MFC-J985DW printer and my yellow is printing green. Any idea on how to fix it? I have run the cleaner several times with no success.

[@BestPrinters]

Run more cleanings.