Epson ET 2750 - How To Clean Printhead - Printer Error Solved

[@BestPrinters]

Expedited Printer Support 👉 geni.us/BPChannelMember Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT Epson 502 Remanufactured INK [SAVE $] 👉 geni.us/O9Y0hO Epson Maintenance Box (Must Be Changed Routinely) 👉 geni.us/Z9yi

[@popsshops]

You say the cause of clogged nozzle is usually due to running the ink tank too low. For me that's not the case and I suspect my issue is infrequent use with ink drying in the nozzle tips. Do you agree?

[@JohnSmith-un9fy]

This guy is just trying to sell ink and kits. Generally the head can dry out a bit or cheap ink can cause this issue as well.

[@AKbushswatter]

Yes, my infrequent use causes the ink head to dry out, power cleaning usually works, but this may work if it doesn't.

[@jeremyp8501]

@@JohnSmith-un9fy exactly lol 99 times out of 100 power cleaning works and even if it doesn't you can easily make your own fluid with a tiny bit of research.

[@JackkBurtonn]

@@jeremyp8501 so my et2750 doesnt have the power clean option so whats the way you guys power clean? Cause ill yake a tooth brush and some rubbing alcohol and scrub a dub lol

[@veganriajones3812]

@@JackkBurtonn press the question mark and power button until the power cleaning option comes on

[@junalvarado2806]

These directions are so clear and simple to follow. After: 3 nozzle checks, 2 print-head cleanings, and 1 power cleaning --- my printer works again. Thank you so much for filming such clear instructions and for selling a reliable cleaning kit product.

[@BestPrinters]

Great to hear!

[@pinkisenvy]

4 years later and this was still very helpful!! !Thank you!!!

[@BestPrinters]

Great to hear!

[@Kateandmykimmytheguineapig]

Hi! Thanks for your video. I have a question; my 2760 doesn’t feed up the ink from the tank through the tube to the cartridge. I have full tank of ink but my cartridge is empty. How can I fix this issue?? Help me please

[@drawingitout4673]

This worked perfectly! My printer was basically printing blank pages. After using the kit, then doing 2 nozzle cleanings, and 1 power cleaning it worked. I was going to give up after nozzle cleanings but the power cleaning made the big difference. Thank you.

[@roxymccue1820]

I followed your tutorial to the T. It was informative and precise. When I was finished, I ran a head cleaning and nozzle check and my magenta lines were still missing. I read the comments down below and learned about Power Cleaning. So I did that. I'm not sure if it was the Power Cleaning that brought back the magenta lines or a combination of both methods, but I got all my colors back.

[@BestPrinters]

Great job!

[@TheClimbingNinja]

These directions were perfect! My magenta hadn't been working right for months and the cyan kept missing lines after performing the head cleaning and running a nozzle check. Using this product and following the directions in the video worked like a charm! Just make sure you do the power cleaning after cleaning the printer heads with the cleaning solution and run another nozzle check to ensure everything is printing properly.

[@Jenn2004kuz]

Im having the same problems with magenta and cyan! Im going to try this!

[@BestPrinters]

Awesome! Yes it is important after using the cleaning kit, geni.us/wArXsZT , too run a power cleaning so that the ink is pushed into the system.

[@AgreeWeCanDisagree]

Mine just started with the magenta so I’m going to try this as well.

[@emilysilver5369]

Hi again, finally updating you on a separate comment per your request. I left wet (water) paper towels in the printer overnight as you suggested. It didn't loosen the black print head that I was struggling with, but I noticed a lot of blue ink on the paper towels in the morning. So I successfully flushed the blue, magenta, and yellow print heads. By the time I tackled black again, it had had a little soak time from the cleaning solution. I was able to push the syringe through and clean the black. It splattered all over me and the wall in the process, but it finally cleared. Unfortunately when I turned on the printer again I heard a pop and smelled a burning smell, and the display had an error message. My husband said it's time to just replace it😬

[@BestPrinters]

So sorry to hear that, did you by chance allow 24 hour waiting. Before powering on after doing the cleaning?

[@emilysilver5369]

@@BestPrinters No I didn't.

[@loribishop6530]

Thank-goodness for you and KZbin!! I tried other suggestions prior to buying the Printhead Cleaning Kit and Power Cleaning (which many said not to do). NOTHING worked until I did BOTH the Printhead Cleaning AND the POWER CLEANING! Everything is back to normal!! THANK YOU SO MUCH for your video!!

[@BestPrinters]

You are so welcome!!!!

[@nblanchard1667]

Same here. I was hitting a brick wall until using both to clear a blockage in the Black nozzle and Power Cleaning my way back to clear print.

[@K.G-u6r]

I just used a cleaning solution to do this! I have an Epson ET-2800. Do I still need to do a print head cleaning on the printer after? Only my yellow is coming out now 🥴 before using the solution, all the colors were working but the nozzle check wasn’t good!

[@BestPrinters]

Yes definitely

[@thaoddones6422]

Does this apply to the epson et8550 as well? My black ink just stopped printing out of nowhere and I've tried passing print head solution through the damper

[@darronfick9894]

Finally got around to using this product on the Cyan printhead. This did the trick. In my case the ink levels were still 2/3 full. I think it might be a good idea to print in full color periodically just to keep things moving.

[@hurstma59]

My color ink wells are over 1/2 full.

[@quatrax8691]

You just need to do a Power clean. Hold the on/off button and the "?" Button. This guy is only trying to sell his stuff while it can easily be fixed

[@BestPrinters]

Absolutely, I am glad it worked for you!

[@bowill2179]

@@quatrax8691 Did a power clean still doesn't work

[@Sheltieshangrila]

@@quatrax8691 I did 2 power cleanings in addition to at least 5 print head cleanings and my black still wouldn't work until I used this product. While there's other cleaners on the market, his kit is set up for easy & immediate use. And with Amazon Prime, you can get it delivered same day. Your negative comment is completely undeserving b/c power cleanings don't work for everyone, as per lots of other comments on here.

[@alioops8241]

Hi I followed your instructions and now the 2 colours I cleaned dont print at all. What do you suggest?

[@donny2929]

Perfect. Tried head cleaning and power cleaning but didn't work. My yellow was dead. Cleaned yellow, did test print and perfect. Blue had lines so did same to it....perfect. THANKS.

[@BestPrinters]

Awesome!

[@emilysilver5369]

Hi, I'm using your kit and started with the black, as you did in your video, but I can't push the solution through even though I heated the solution on the stovetop in a glass jar placed in a waterbath, 3 separate times in succession. I'm exerting a lot of pressure trying to push the syringe, but it won't budge. Thanks.

[@BestPrinters]

If you have used warmed up solution and it's still not budging, try leaving the syringe and silicone tubing attached to the nozzle and make the towel on the bottom moist and leave overnight. This may allow for things to loosen up for you to ultimately push solution through please respond in a separate comment if you have an update or would like to respond so I can be notified.

[@sinisass]

Thanks for the video. I have a question a friend lent me this printer but I can't lower the upper door, where is the release button?

[@BestPrinters]

You have to push it up before it unlocks and comes down.

[@fam.hubmer497]

Sorry, I have a chestion, when the cleaning is finished the ink how it come to the printer head ? Because when I cleaning there is then cleaning water in the tube and no ink, when I am finished.

[@BestPrinters]

When you do a power cleaning it pushes all the ink into the system.

[@fam.hubmer497]

@@BestPrinters Thank you

[@coltonjohnson1681]

Hi, what should I do if I have A LOT of resistance in the black color? I continued to run the fluid through the others just fine! Thank you for your help.

[@coltonjohnson1681]

Also, my towel keeps collecting black ink? But lots of resistance from the top part where I put the fluid in

[@BestPrinters]

Warm up the cleaning fluid before application.

[@georgemob1]

hi thanks for your video, i had a blank paper printing and after cleaning nozzles and power cleaning process it started printing but there are still lines shown in printing in other colours except black - @the printer guy: could you please help & advise ... thanks

[@juntjoonunya9216]

This usually works and has already for CM&Y but not K. I've run a couple ounces at least of isopropyl alcohol through to some paper towel underneath and it's still not printing but showing full ink on a new cartridge. Sounds like the printhead dead no? Or do I just keep going a few more rounds?

[@BestPrinters]

Keep on doing the cleaning a few more times and make sure you the power cleaning once you are done with the kit.

[@marthabernal1098]

Where can I buy a extra empty cartridge for my ink. The pink cartridge nozzle broke right were the tube connects

[@BestPrinters]

You will have to look up the replacement part. Maybe on eBay.

[@dianarobles5926]

Hello, I've replaced the ink and cleaned the ink cartridges and printhead. I did the nozzle check, print head cleaning and power cleaning and nothing has worked. The horizontal printing isn't working well and when I print out the sheet all the segments are spaced apart none touch at all or overlap. Idk what else to try. If you can please put some input on what else i can do. Thank you.

[@BestPrinters]

You will need to repeat the cleaning process again and you may need to also warm up the fluid over boiling water, and reapply warmed up solution.

[@nicholasnook-shelton1844]

Epson ET-2750 printer purchased 2021. Issues with printing. The instructions say to fill the ink, however the tank is indicating they are quite full. The colours work then don't work. We have tried flushing the print head - not a lot of luck. The black worked magnificently. The red was working then when a picture was printed there was no red. Could there be an issue with the ink? Could we add something to the ink in the tank? Not really sure what we can do. Have you any advice or further trouble shooting, please.

[@amyleduccameron]

THANK YOU! For me it was just about the first part of the video, with interrupting the nozzle check and then placing a paper towel to collect all the excess ink! Everything is clean now, and saved me a lot of frustration😌🙏🏻

[@BestPrinters]

Glad it helped!

[@kathaleenbrewer9559]

I have the Epson ET-2720 and the top glass does not lift up so I can't get to the print nozzles. All the colors stopped working. Is there any way to fix this printer?

[@BestPrinters]

Yes you will need to remove the screws around the glass scanner to reach the printhead.

[@NancyFerguson-i2s]

UPDATE: I did a "power cleaning" and that fixed my problem. I probably didn't need to order and perform the cleaning with the Printhead Cleaning Kit. Followed directions after ordering the cleaner. It's the magenta that is causing my problems. Ran multiple head cleaning and nozzle check after cleaning, still no magenta showing up on the nozzle check printout. Any suggestions?

[@BestPrinters]

Make sure Magenta is totally full and run another power cleaning.

[@JamesRitter-q5u]

Followed the instructions. The next day tried to run the nozzel check but suddenly the printer went off and I can't get it back on - seem like it died. Pulled plug and replaced but still nothing. Although I took steps to make sure it was dry, not sure if it shorted due to the solution? Anything I can do to save the printer or is it a goner?

[@BestPrinters]

If you didnt allow 24 hours to dry it may have shorted. Now you should wait another 24 hours before trying to power on again.

[@JamesRitter-q5u]

The printer still won't turn on. I appreciate you offering a solution to fix the ink blockage but you should be more clear that this could also completely brick your printer. Although it has been proven to work, perhaps this isn't the best approach for trying to fix given failure results in hundreds of dollars wasted.@@BestPrinters

[@mariavarela1218]

Awesome video. Purchased the cleaning kit just ran the nozzle check and flushed the heads out. The color segments are not printing still. Only the black color. Any other suggestions?

[@BestPrinters]

You will need to run a power cleaning after running the kit.

[@mariavarela1218]

:( I have an error message that I cannot bypass after I completed the cleaning kit instructions.

[@harmonydawnretreatcentre349]

Help- my printer head does not move like yours. Turned off it is to the very right of the printer and I feel it will break if I force it. I got the screw out but it wont open up. How to move it to the middle? I have tried to turn it on and see if i can get it to stop in the middle but it always goes to the right. Any tips would help.

[@BestPrinters]

Print anything and while it is printing unplug the printer. I know it sounds crazy but I have done it with no problems many many times. Its the best way to get it done.

[@harmonydawnretreatcentre349]

@@BestPrinters i wondered about that. will try right now. Thx for the tip will let you know..

[@harmonydawnretreatcentre349]

Hi, i was able to clean it out as per video and it still doesnt print magenta. Any ideas?

[@blessedhomeschoolmess]

What if when you did your maintenance checks and literally no ink prints ? I was getting vertical lines prior and at times just blotches on the paper. Would I use the same method?

[@lydiabutler606]

If everything is coming out just a blue color will I need 4 kits to clear out the each color.

[@BestPrinters]

That's normal. You only need one kit maybe one additional if you need more solution.

[@ummismail7229]

Hi there, is it normal that after doing your procedure my printer is printing blank sheets?? can you advise? Thanks!

[@BestPrinters]

That is very normal after doing a power cleaning it will come back to standard printing

[@propsandpop]

Now that the cartridge is empty how long does it to draw ink from the reservoir? Right now my black and cyan are blank

[@BestPrinters]

it may need to go through a few manual cleaning cycles through the system before it's back to normal

[@petertran5419]

I cannot push the syringe down. The pressure build up in the ink tank is not allowing it. In other words I can't push any fluid through. What do I need to do l?

[@BestPrinters]

Warm up the cleaning solution.

[@billbaran1133]

After using the cleaning solution. I ran through a "power cleaning". After the power cleaning everything works well. The cleaning solution worked well but I needed that final step.

[@BestPrinters]

Yes I just came to the same conclusion and added it to the description. Thank you for sharing.

[@DarEyezKnight]

i did used print head cleaning but needle still hard to press and not full yet. Looks like under hole blocks?

[@BestPrinters]

If you remove the plastic cartridges you can clean the nozzles directly.

[@aneetabrown5814]

I was getting white vertical lines through some of my text and followed Janice Carter's suggestion of a power cleaning. It worked! Thank you Janice. Good video.

[@BestPrinters]

Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!

[@marvelousrazwa]

Hey I got a question…I accidentally set up my brand new ET2750 I load couple of the inks and I forgot to load up the black and the yellow… but I filled them afterwards, but it doesn’t give me an options to charge the black and the yellow… eventhough I reset the ink the black and the yellow still not printing or showing… what should I do ??

[@BestPrinters]

In the settings there should be an option to charge the ink after set up.

[@TheApricotAgency]

My magenta doesn’t seem to be working…. But my 502 is also getting low. I k kw you’re selling a product and all but looking for an honest answer: maintain or replace? Do I buy more ink and flush clean the head or just buy a newer unit? Is there any maintenance to be done on the waste box?

[@federicozheng803]

Hi! I did the steps from the video and also power-cleaned the printer. However, I noticed how all colors were used except for black while power cleaning. Does this mean there's an issue with my black ink in the ink tank? Also the inks have been there for at least 9 months, what should I do? THANK YOUU

[@BestPrinters]

Not necessarily, repeat the process until all the colors return though.

[@islandaloha]

How did you center the printhead? When you power off the printer, the print head automatically moves to the right hand side and the printer locks it there.

[@kathycastrataro1685]

I was getting the colors but no black printing. I tried head cleaning and it didn't help. I tried using the kit to flush the black, and when pushing slowly on the syringe, the tube popped off and I got black ink everywhere. Any other suggestions?

[@BestPrinters]

You will need to warm up the solution and reapply. Gently steady pressure will eventually allow for the blockage to break and you'll be able to clean the printhead.

[@uniefresh420]

I had a black clip fall off when I was putting the paper towel on and was curious if you had a pic or video so I can put it back on thank you

[@sheepsfoot2]

Had to do this half doz times and several power cleans finally all 4 ink nozzles are unclogged and working 👍thankyou Brandon !

[@BestPrinters]

Great to hear!

[@jessicaleroy1296]

Hey, am I supposed to do a power clean or something after doing this because now that I have flushed the blue, I’m getting no blue at all :/

[@shaunatower3864]

Hoping you get this and have an Idea...Bought your solution and flushed everything. Everything flowing well and even pulled ink back into the print head cartridges. All colors are not printing at all!! It's like its not pulling the ink out of the tanks. There is ink from tank to nozzle but not to paper.....any ideas?

[@BestPrinters]

Now you will need to run a power cleaning. That will push the ink back into the system.

[@andracollett5088]

started out yellow and cyan not working. used the kit and nothing prints, used the kit again the next day and black and magenta print but very faint. My tanks are all full and never below half. Any other suggestions?

[@BestPrinters]

Yes, run a power cleaning always after using the kit.

[@andracollett5088]

Tried that and only black prints. All ink is full

[@weijiechin5483]

Hi, great video! I bought the solution and follow what you have thought. The black ink went well however I face a lot of resistance with the color inks even after flushing it twice on the yellow one, don’t have enough solution to flush twice for the other 2 colors. Ithe colors still did not come out on after nozzle check Appreciate advise. Thanks

[@BestPrinters]

Hi, just run power cleaning until the color returns.

[@kentdavis7787]

after going through this procedure, none of the colors work, the tanks have never been below 3/4 full. wondering if the clog is somewhere before the cartridge

[@BestPrinters]

It is more likely in the actual printhead.

[@kentdavis7787]

@@BestPrinters so do you think I should run more solvent through the cartridges or the actual printhead? I was wondering too if a clog in the cartridge wasnt allowing for ink to by siphoned into the cartridge, I ordered new cartridges to see if that would help.

[@manpreetsinghlic]

Hey. So i did this now its not sucking any new ink from tank. What after the video how will the ink return in the cartridge head as its all flushed with clean solution

[@BestPrinters]

Use the power cleaning function.

[@fablejournals4142]

Have you changed your cleaning kit? I clicked on the direct link in your video and was taken to Amazon which showed Best Printers cleaning kit. I was sent a generic version with parts that clearly do not fit each other.

[@BestPrinters]

All the parts fit.

[@fablejournals4142]

@Best Printers I may not have made myself clear. The kit I was sent did not say anywhere on it Best Printers. There was only one adapter that definitely did not fit the tube (it was way too small). I'm wondering if your original kit has been changed? Amazon claimed it was the correct kit. Looking back at the transaction, even though I clicked on the link provided here (it did take me to Best Printers kit) it was not Amazon or Best Printers who sent it. There was a 3rd party. I'm trying to figure out if this is supposed to be the kit you are selling or if the issue is on Amazon's side. I've ordered 2 and sent back 2. They do not resemble the kit you describe in your video or on your website.

[@rbrutout58]

Hey buddy, I flushed all of my print heads and did all the steps you recommended but it is barely printing the colors, they are real light. At least the black used to work but now it barely prints too. Can you tell me what I did wrong? Thanks!

[@BestPrinters]

Ok, so now you need to run a power cleaning and you should be all set.

[@rbrutout58]

Thank you brother, my printer works like new! You saved me $150.@@BestPrinters

[@hayleygomes3844]

After following the first steps and taking the screw off, I then had to put it all back because it wasn't forewarned that we had to buy a kit to follow it. Might be helpful to have had this warning early on!

[@BestPrinters]

Ok, thank you for your feedback.

[@christinabigelow7970]

Hi Best Printers, Have you ever used this product with an Epson ET-2550-? I am able to clean printer head but not the lines.. and I may need more color ink but I have black and only need black at this time. Can you help? Thank you... or should I just save time and buy an HP jet printer? TY

[@BestPrinters]

SO the printhead is the only thing you really need to clean. After doing the cleaning run a power cleaning. You should have full quality once you complete those two things.

[@w0lf27]

So i left mine in the closet for 2 years, Pulled it out used this cleaning solution. IT fixed all colors except black. The cartridge that the tube pushes the ink into will not fill and print. I have checked the tube it is not clogged. Any thoughts?

[@BestPrinters]

You can also remove the cartridge and clean the nozzle at the bottom of the printhead. That should do it. Please refer to this updated video, kzbin.info/www/bejne/q3-TkHyeiLGprNk

[@w0lf27]

@@BestPrinters Its no longer clogged, its not sucking ink from the ink bay. and i know thats not clogged cause i used the syringe to and pushed air and it bubbled the ink.

[@w0lf27]

i can put the ink bottle in the top and squeeze and Ink will flow but thats it and still wont print or pull ink from the ink bay

[@marykaupiko2223]

Can I use the cleaning kit for sublimation printing?

[@irenegill4573]

I have an Epson WF-2750. I have tried cleaning the nozzles multiple times, all I get are faint magenta lines and low ink warnings even though I have replaced ALL the inks with new. I am so frustrated. Will this work with my printer (if it works)?? I looked at the product on Amazon, I don't see my printer listed. :(

[@Marc1618]

What if after i used the cleaning solution then power cleaned, then head cleaned, then nozzle checked and no ink came out, and then after trying again for a nozzle clean it gave me an error message, and now every time i turn it on it just goes straight to error message. Do i have to wait 12 hours before it does something? Maybe another power clean might help? Just dunno how to get around the error msg now

[@paulabodkin244]

I had filled the ink wells and then found that the colours were faint. By flushing/cleaning as per your video do i lose all the ink that was in the wells?

[@BestPrinters]

Yes

[@hervedasilva9408]

I purchased the kit and did exactly what this video showed. Did a power clean afterward and now my cyan color will not even print?

[@BestPrinters]

Try doing the cleaning with the kit again and this time warm up the solution.

[@hervedasilva9408]

I warmed the solution and still nothing. Before running this product I was getting lines at least but now nothing.

[@hervedasilva9408]

Okay, so this is what I did to get it back up and running. First of all I was getting cyan to print with lines after purchasing your product and did exactly what was shown on your video cyan no longer printed at all. Warmed up the solution and tried again still nothing. I decide to use the syringe that you provided but instead of loading the solution since I know heads were unclogged I decided to use the cyan ink and decided to prime the ink back in with the syringe and that did it. Printer back in perfect running solution.

[@Sheltieshangrila]

Just purchased the cleaning kit. So thankful it's available for same day delivery via Prime. Hoping this works because my ET-2750 is only 4 years old and I've only printed 189 times with it according to the print counter. I've done a print head cleaning at least 5 times now along with 2 power cleanings but the black will still only print with a very faint outline of fonts. It won't print at all on a nozzle check or alignment. I've spent way too much time on it now so this is my final attempt at fixing it before I throw in the towel and buy a new printer, which won't be an Epson.

[@BestPrinters]

Best of luck, please feel free to reach out via Amazon messaging if you have any questions or concerns.

[@Sheltieshangrila]

@@BestPrinters I just finished and it worked like a charm! The only nit I have is the instructions could have been a little better... such as what all the accessories are for and the best way to heat & fill the syringe (ie: heat a mug of water in microwave for 1 minute then let bottle sit in mug for a few minutes & then to fill the syringe, feed plastic tubing into bottle to suck up fluid). Fortunately I rescue squirrels so am familiar with syringe feeding & food warming, but people who aren't might have issues, especially if they're elderly. I'm very happy with the results and your video gave excellent guidance. Just gave you a 5-star rating on Amazon. Thanks so much!

[@BestPrinters]

Thank for that feedback! I am glad you were able to manage and get your printhead cleaned. Also thank you for the review, that really helps! Have a great day!

[@Sheltieshangrila]

@@BestPrinters FYI that I just sent you a support question via Amazon regarding an issue that developed...

[@loricordeiro9549]

How long does it take to have all your colors print?

[@BestPrinters]

It really depends.

[@muffyclarkgill6642]

I flushed the tanks as per your instructions. I had a hard time putting the printer back together again. I tried to do a nozzle check again. Now I keep getting this message saying scanner error and invalid. Turn off computer. Can you help me please?

[@BestPrinters]

You need to reset the printer. Start off by leaving it unplugged for 24 hrs.

[@qjarman7753]

Hi… thanks for posting this. I followed your tutorial and it work great except now my prints and very feint/wishy washy… like the ink has been diluted… any advice please 🙏

[@BestPrinters]

Repeat the process with the kit and also run a power cleaning.

[@psuehiro]

so I hoped to be successful like those below. Seems I am not so lucky. My printer had the yellow segments broken, and after a few power cleans the yellow was completely gone. I did the nozzle clean (yellow only). Ran 3 nozzle checks and two power cleans. Some prints came out with splotches of yellow or black on the paper and still no yellow segment. During the 3rd power clean my printer shut off. When restarted the display shows "E-01, Printer error. Contact Epson Support. Non-printing features are available. 031006" and then "turn off"...Can you please advise? I will attempt to contact support for next steps.

[@psuehiro]

also my printer smells funny...almost like a burning smell.

[@BestPrinters]

It seems that the printer may be taking the cleaning poorly. I would suggest, getting a technician involved and let it sit powered off for 48 hours.

[@Shanie1126]

I just ordered the cleaning kit because two of my colours are not coming out well and one not at all. I was just wondering should I fill my ink before cleaning? My ink levels are half full or more on all. I have done head cleaning and a power clean and left off for 24hrs then I did it again but still not working, hence why I ordered your cleaner. Please advise I just want to know if it would be best to fill ink first. Thanks

[@medusa569]

How did you get the top lid to flip all the way back for access?? Mine doesn't go back that far.

[@dillorado]

Keep pushing it back gently. It gets stuck a bit.

[@medusa569]

@@dillorado I\ll give it a try again...I would up just taking the top off from the left side

[@TahoeKellys]

What is in the fluid, please? Is that something we can replace ourselves?

[@paulagonzalez7264]

Directions were great followed them to the T. But I am now having issues with the one that I cleaned. The cartridge will not refill again. Any tips on correcting that?

[@BestPrinters]

Yes run a power cleaning after using the kit.

[@saidagarcia75]

Help please with my epson et-2750. My cayan is printing green. I've done head cleaning & power clean. What els can I do

[@vispibyramji8262]

After following the video my printer has now stopped working. It's giving me an error message saying 'Contact Espon Support. Non printing features are available'. Any suggestions?

[@BestPrinters]

Try reseting the code, by powering off unplugging and leaving of for a minute. Then power it back on.

[@sueannreeder6231]

I have an issue in that my black ink will simply not go into the reservoir! It's been fine before, now I turn it upside down & it will not drip into the tank. I have the Epson ET-2750. Any help will be appreciated, thanks!!

[@BestPrinters]

Run a power cleaning.

[@sar8349]

How do I lift the top to get to the printhead?

[@BestPrinters]

Tabs on the sides

[@ts-uj7lt]

I used this kit as my printer was not printing anything at all. No ink on paper. This fixed all 3 colors but the black is still not printing whatsoever. I even tested the inlet tube and that is working fine, I'm able to pull the ink through it. I can see ink in the black cartridge but it will not put ink on the paper! When I do power cleaning it seems that it is not doing ANYTHING with the black. The ink level stays full each time. Leaving it to rest for 12/24/72 hours doesn't work either. I am at my wits end with this thing, any ideas?

[@BestPrinters]

Use warmed up solution on the black nozzle.

[@ts-uj7lt]

@@BestPrinters Thank you, I will try this. Should I warm the solution up in the microwave or another way?

[@exquisitecandy2684]

Hey Printer Guy- thank you. 😍Also, someone complained that you were only trying to sell printer kits. 4/5 rating(50 kits sold last 30 days) and 5,751 reviews so I wanted to call BS on that! Also hoping to let you know that when I click the kit link I get an error. If I click ok the page loads. Perhaps because I am in Canada. I am following you now. Appreciate you.

[@BestPrinters]

Thank you for the info in this comment, I appreciate you!

[@exquisitecandy2684]

@@BestPrinters you saved my printer with the information on your videos. If things had really dried out, I would have happily purchased a kit. I did the cleaning etc a few times and it is perfect now. It sat too long.

[@livingmytruth90]

Great tutorial! my only question is- once you're finished, do you run a nozzle check or do you need to clean the printer head after? Like what's the follow up afterwards? TIA

[@BestPrinters]

Yes you will need to run a printhead cleaning until the color returns.

[@livingmytruth90]

@@BestPrinters ok thanks so much! Im waiting for the kit. Fingers crossed it works! 🤞

[@AliceRitchie-n8y]

Will the cleaning kit work with an Epson 2720. Also my problem seems to have occurred when I overfilled the magneta and now I can only print back or pink. Any suggestions?

[@BestPrinters]

The cleaner should help.

[@samanthacarney283]

I cleaned my rosin et 2750 and error message came up reading the 031006. Are you familiar with this

[@BestPrinters]

Try resetting the printer.

[@blkicemike4857]

When I do nozzle check ,. The page is blank,.. the tanks have ink in them all 3/4way full,..

[@BestPrinters]

This method should help then.

[@blkicemike4857]

@@BestPrinters I flushed the printer head,. Also checked all the lines ink flows thru ,all the removable tanks on top print head seemed to not be getting ink so I primed them,. STILL NOTHING, BLANK PAGE,. Any suggestions?? Occasionally was getting faint pics when I'd print but after flushing ,. Now getting blank page! I may have totally phuaqt'up my printer??

[@YEGOuellet]

Cleaning went well. I cleaned all the four inks. Although it started to work with anemic results, as I printed, the ink almost completely disappeared. It seems that the ink is not coming to the print head. What can I do to fix this? Tks

[@BestPrinters]

Hermes, is correct.

[@karadasea]

How may printer heads can be cleaned with one kit? None of the colors are printing on my Epson ET-2750.

[@BestPrinters]

For priority responses please sign up to our membership 👉 geni.us/BPChannelMember

[@paulrice801]

My ET 2750 has lost all colour (test page only shows the black...zero on colour)... is it likely all 3 have gone at the same time, or possibly another issue?

[@tattoomike84]

Did u ever figure this out? I have the same issue rit now

[@paulrice801]

@@tattoomike84 Hi Mike - See Janice Carter's reply below.. took two goes for me, but did work after the second attempt and has been fine since.....

[@BestPrinters]

Yes that can happen, use the method in this video to fix that.

[@cherylwalker5620]

Nothing clogged but when I print an image it has like these lines through the picture. What is the cause of that? Any suggestions

[@cherylwalker5620]

Also mind you this is a brand new printer

[@roslynthomas8871]

Mine is doing the same thing. Tried this and I still have lines...

[@cherylwalker5620]

Trying to understand why. But everytime I do a cleaing from the maintenance button it stops until about like the 4th or 5th print then I have to do that all over again🤔🤦‍♀️

[@BestPrinters]

Try using the method in this video.

[@Overland_Chuk]

Great video. Can't wait to give it a try. I do have a question however. It is possible that the clog is at the supply tank into the vein as opposed to at the print head?

[@paigemcdonald2063]

Can you tell me how to get the printer to go through the initialization process again where it will charge the ink?

[@JonBrahh]

Amen, havent been able to find this info for months...

[@BestPrinters]

Yes run a power cleaning.

[@brianfindsall]

where does all this fluid go ? does,nt it flood the bottom of the printer unit.

[@BestPrinters]

It is soaked up by the paper towel you place at the bottom.

[@Labrow76]

Will this work with sublimation ink also?

[@BestPrinters]

Absolutely.

[@hellkell8693]

Didn't seem like I was getting ink to the printer head. I tilted the printer on its side with the ink wells up. I pulled off the printer head tubes with needle nose pliers and as soon as ink started coming out I put reattached them. Worked after.

[@BestPrinters]

Its not a perfect science, it does take some creative thinking.

[@evone9141]

I have basically full ink, I have been very busy and have not used my printer in a couple of months so I think it just made the print heads dry. Well this still work?

[@parfner666]

Did you ever get it fixed?

[@tiajewels2820]

I’m not getting any error’s but when doing a nozzle check, my yellow and magenta are not printing out.

[@BestPrinters]

You will need to do this cleaning then

[@riyoun1]

This worked for me and I was happy with the purchase rather than buying a new printer at $300. I put in some suggestions for some things I learned and put them in my Amazon review for the product.

[@BestPrinters]

Awesome, thank you!

[@bigflyer2172]

When our ink supply on the ET 2750 is completely full we get an error message that warns "low ink please check ink levels." every time we print. test printing looks ok.

[@D.J_RC]

I don’t think that the ink is even making it from where it’s being stored. Can I attempt to use this plunger to pull ink through from there?

[@johnscaramucci3777]

So after cleaning my printer heads using your product I went to run a nozzle check and the printer shut off in the middle of the check. Now it won't turn on at all. Have you run into this issue and would you have a solution to this problem?

[@montsinya]

It did work for me. It went from not printing at all to printing perfectly well, but I had to do a power clean.

[@BestPrinters]

Glad to hear that!

[@PepsiManX360]

I ordered one of these kits from Amazon, but sadly FedEx lost it in transit (as usual). Hopefully they find it and send it to me for my older Brother printer.

[@BestPrinters]

Hey man message me directly, click on Best Printers on my listing page and I will get you a replacement.

[@khalidsyed5028]

Hi, I just saw your video. A very good attempt to help people. I want to ask you if you could help me fix my printer problem please. It is printing haphazardly in portions of the page.

[@BestPrinters]

Hi! Yes you will need to do this cleaning.

[@elizabethjackson8333]

I have this model of printer, and it just started printing heavy on the 'magenta'. After performing the 'clean print head' function, it would print only black. So I took your advice and bought the cleaning kit. Everything went smoothly, the fluid flowed through easily and any clogged ink flushed out. Yet although there is plenty of ink, it doesn't print at all! The error message "Non-printing available. Contact Epson" Odd way to phrase it....I would have thought, "Printing not available". Now I'm stuck. Any advice? How do I get a refund on the cleaning kit, since it's made matters worse?!

[@BestPrinters]

Hi Elizabeth, so one thing you can try is running something called a power cleaning after using the kit. Do that a few times as required. If this does not work please message Best Printers via Amazon and I will provide you with a refund.

[@elizabethjackson8333]

Elizabeth Jackson I did a couple of things; I ran the power cleaning as suggested and although the test print showed in the print queue, it still didn't print. The error message returned: Contact Epson Support (although 'cos of COVID, they aren't answering). So I reinstalled the drivers and tried changing the ports (changed them back). No luck unfortunately. Diagnostics say there's nothing wrong, but I can't get anything to print at all. The printer is useless :-(

[@lissaw1334]

I did this cleaning with this product and now have the same error message and a smoky smell to boot

[@SashaSky-l8x]

What happens if you can't push the cleaning solution through, even gently?

[@BestPrinters]

Then you will need to warm up the solution.