How To Flush - Clean The Epson ET 4760 Not Printing Color/Black [FIXED]

[@BestPrinters]

Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 amzn.to/4d0Gnkz Epson 502 Remanufactured INK [SAVE $] 👉 geni.us/O9Y0hO Epson Maintenance Box (Must Be Changed Routinely) 👉 geni.us/Z9yi Printer Support 👉 geni.us/BPChannelMember

[@dennissutton3767]

I am 73 retired professional advertising photographer, I’ve own printer since they were invented, I really appreciate this. It saves me a lot of money and grief. I enjoy doing this type of work. Thank you, sir. I have a new fan.

[@BestPrinters]

Thank you so much for the compliment. I really appreciate the support. Hopefully I can continue to provide even more value with my content.

[@rondabrown8897]

you literally saved me 400 bucks by doing this video...my printer was printing blank pages...tried everything until i saw this video, ordered the cleaner, followed the steps and BOOM ! all works! thankyou!

[@BestPrinters]

Ronda, I am so happy to hear you saved money with this solution!

[@tommyjay9752]

Me tooooooooo 💯 👍🏼

[@betsygarcia4204]

@@BestPrinters can you pls reply to my comment

[@brahmsforever4313]

So glad I found you! The whole thing took about 30 minutes and saved me HUGE money! "DIY with the Printer Guy" is my new motto! THANK YOU!

[@BestPrinters]

Fantastic! I am here to help!

[@ThePatbiller]

Thank you. You saved me $600. It worked.

[@BestPrinters]

Thats awesome!

[@lesruark5997]

These instructions worked brilliantly. It resolved the issue of Cyan and Yellow not printing. The cost of the supplies from the links below was around $50. THANK YOU!

[@BestPrinters]

Awesome! Make sure to subscribe!

[@timtherealtorbrown793]

This worked brilliantly. Thank you for your very clear instruction. One point: the end of the video- instructions for the self cleaning component was a little rushed. I figured it out but barely. You need LOTS of paper towel and you should mention don't be shy moving the printing head over the paper towel. Thank you again! Fantastic!

[@BestPrinters]

You're very welcome, I'm glad the video helped! Appreciate the constructive feedback as well. Thanks for watching!

[@kathybourgault3000]

Hello Brandon, I don't know if you still read comments since this video was done 4 years ago. I have had an Epson ET4760 for 3.3 years. I love the printer and use it often. I had 200 flyers and 100 pamphlets to print for a ministry even last Sunday. When I attempted to print them the colors were off. When I did the print nozzle check BCM were fine, but there was no yellow. I went on KZbin to fix the problem I watched a lot of videos but yours was the best. I ordered the BP Printhead Cleaning Kit. Of course It did not come in time for me to print the flyers/pamphlet so I "farmed them out" to other. Today was the first chance I had to do the cleaning. As you demonstrated, it was very easy. I appreciated your step-by-step instructions. I did everything exactly as you demonstrated and it went "smooth as silk". With the exception of one problem. The white paper under the print head got wet and fell apart. I had paper towels on the right side which got soaked, as your did. I had a Sham Wow cloth to soak up excess. Now I am in the 24 hour drying time. My concern is the wet white paper underneath that is falling apart from the liquid. Do I need to replace this or leave it as is? Will my printer work when all is dry? Thank you.

[@stevenstern1155]

Thank you for the video. I finished all the instructions. I would like to add that once I finished flushing each of the tanks I had to order the Epson T04D100 Ink Maintenance Box $15 at Staples. Have to wait to see what the print output looks like. I also used Q-tips to remove any liquid residue around the print valves before re-installing the tanks. In addition as a precaution I would recommend purchasing a pair of goggles and plastic shield for your face in the event the cleaning liquid somehow splashes. Bit of advice to everyone is to hold the tube securely to whatever tank your flushing while pushing the liquid from syringe. Pushing the liquid through from the syringe does require some effort. Be careful. The last thing is the phillips head screwdriver from the suggested parts list is too large. I had a Belkin dual screwdriver (flat and phillips head) that worked. Thank you again for the video.

[@apealternative5196]

Phew - it worked! After our printer (well my wife's printer) that she had sitting in storage for 3 years while we went off to Texas, she says to me after returning to Canada, "here, have my good ET-4750"! I tried printing - but only blank pages came out! Not even a drop of black ink. So I found this video. Made sense. Ordered right away from Amazon, and the next day had the solution. But I don't remember hearing in the video (I could be wrong) that warming the solution could help. One of the nozzle head was totally dried up and so I push very hot water and it unblocked it. Then like the instructions said on the box, I needed to wait 24 hours before re-plugging the printer and doing all the maintenance test multiple times. It's now printing - saving at least $600 for another compatible Epson! Thank you very much!

[@BestPrinters]

Excellent, thank you for sharing!

[@cynthiahughes2032]

I ordered the cleaner and followed your instructions for my ET 2760, and now the Magenta is finally working again! It was hard at first to push the solution through, but I kept pushing slow and steady until the 15ml was dispensed. Thank you!!

[@BestPrinters]

Awesome!

[@giulierichards588]

Thanks for this video. I appreciate the detailed, clear and confidence boosting instructions in your video. I often lack confidence in dealing with technology issues, and your strong encouraging words, saying that this is an easy fix, helped encourage me to take care of the problem myself. I decided to try the deep clean FIRST, and that completely fixed my color printing problem on my ET-4760 printer. The deep clean, which took about 10 minutes resolved my printing problem. As soon as the deep clean was complete, I was able to print in color immediately after the 10 minute deep clean. These are the steps I followed for the deep clean Step 1: TURN OFF THE Product Step 2: Visually check the ink levels and make sure each ink tank is at least one-third full. ****Caution:*****If you run a Power Cleaning when the ink levels are low, you may damage the product. Step 3: Press and hold the power button and the help button AT THE SAME TIME until the Power Cleaning screen appears on the LCD screen. Then I followed the on screen prompts....and completed the power clean!!! DEEP CLEAN was painless, effortless, and EASY! The printer did all the work and I am back to loving my printer again!

[@BestPrinters]

Perfect!

[@exibuchay1695]

Thanks for this video. I have an ecotank. I was able to run the nozzle cleaning program multiple times. It took six times. But it finally came through. This information is very useful. Thanks again. I'll know what to do when the printer can't clean itself

[@BestPrinters]

Awesome!

[@cuppadan]

I'll be! This actually worked on my ET-4760. I am impressed. Thanks for the solution kit and the precise instructions. I would like to point out that the paper in the paper path got soaked and then jammed up when I turned it back on. Need to have some sort of plastic sheet to slide under the head along with the paper towels to prevent that. Beyond that this worked perfectly and saved me $500 for a new printer. Thank you!

[@divasandduckets7112]

Same. Wish I saw this comment before I started!

[@jonm-pe2mb]

Today is the day after Thanksgiving 2023. This video helped me power clean my jets. I didn't have to clean jets with the product but the power clean did the job. Thank you.

[@BestPrinters]

Great to hear!

[@Lin-Rock_262]

Thank you so much for the instructions of the print-head cleaning video. This was truly very well done and easy to follow. One suggestion: the one most IMPORTANT thing that wasn't in the Epson instructions is that the Maintenance Box in the back of the printer also needs to be replaced AFTER the full cleaning is done. If you do another one of these videos, can you please mention that to others? Thanks again and regards.

[@BestPrinters]

Hi, I am glad the video helped. Yes I will make sure to mention that in the future.

[@c2far1]

this was perfect!!! thank you !!!, now after getting pissed for over a month , I finally decided to look up the problem and found your vid. It works perfectly. you just saved me from throwing another printer, tv, tablet off my cliff!!LOL, really- THANK YOU

[@BestPrinters]

I am so glad to hear this worked for you!

[@gabbadd5840]

It worked! It actually worked ! The power cleaning at the end was a must regardless of what Eason says!! Thank you!

[@BestPrinters]

Great to hear!

[@divasandduckets7112]

Still helping us 3 years later. Perfect play by play. Worked seamlessly!

[@BestPrinters]

Awesome! Glad I can still help!

[@rickfloyd451]

I'm glad I came across this vid. I haven't done it yet, but this seems like a great solution. Apart from that, having this problem makes me feel regretful about buying this printer. This is going to be a recurrent issue.

[@ElizabethDelzell]

Blank pages from my Epson ET 4760 before this kit & video - now, we're back in business! Thank you for the product recommendation and the step-by-step video. BTW, I broke one of the clips on the printer head cover - thank goodness it didn't make a difference. 😮‍💨

[@JimmyVazquez1]

I just did the deep cleaning and it worked, just saved $25 and time. Try that first!

[@BestPrinters]

Excellent!

[@MrAndrewMaxwell]

Thanks for this - very helpful....you might want to note that in addition to making sure you have plenty of ink at the end - you might want to check that the maintenance box is not full - because if it is - you can not do the power clean. I am ordering one - but it just means another day before I can print.

[@BestPrinters]

Good point, thank you for sharing!

[@jackbrendagncbj9704]

I cleaned my printer heads with what you suggested to buy. I wasn't aware that you had to run the power clean after and I'm just about out of ink in black but low in other colors. Will it hurt the printer if I wait to get ink tomorrow? Thank you so much for this video. I had to change my Maintenace box already and thought I had to replace the heads too. I'm happy that it is as simple as just cleaning them. Thought my printer was going to be another expense. I have two autistic boys and I need to print lots of things for my records. Thanks.

[@loumingacci6064]

Great video. One thing I wish you would have mentioned is if the unit still wont print all colors and needs power-cleaned you'll need to replace the maintenance tank.

[@BestPrinters]

Yes that is true, thank you for mentioning it!

[@robheaton]

Very grateful for this fix for my ET-4750! Although I will say, it doesn’t seem to have been totally necessary to buy new ink to have on hand. Upon initiating the Power Head Cleaning, the printer said that the tanks only needed to be one-third of the way full. The Best Printer’s cleaning kit was a lifesaver though!

[@BestPrinters]

Awesome man! Thanks for the support!

[@Vernette313]

I have an ET-4700. I don’t think the ink reservoirs are filling. I have the bottles in correctly but I can’t see any of the ink colors through the little windows in the front. How do I make sure the ink is even in there? If ink is not getting in how do I clean the nozzles so the ink goes in? After that, how do I get the top of the printer off? In the video you just lift up but the 4700 doesn’t do that. Thank you! -Emily.

[@mariedaniel2978]

Thank you for sharing this info, I've been only able to print in black for months now & it all started just out of warranty.

[@BestPrinters]

You are welcome!

[@timalcorn2629]

Completed process with cleaning kit. Cleaning fluid saturated the paper towel and got to the white piece underneath the print head. Did I wreck it?

[@BestPrinters]

No, just let it dry for 24-48hrs.

[@sherylsilkie9954]

Ordered the goods. Will be trying this later this week. Thanks for your clear tutorial 👏

[@BestPrinters]

Best wishes

[@ireneottesen9130]

Great video! Do you have any advice for doing the same for en ET-7750? The cartridges are different so can't get them out the same way you did. Cheers!

[@benmark1006]

I did.not go through the other post. Forgive me if answered When you are doing a Power cleaning where does the excess ink go. I know about the pads that ultimately get washed .and reset msg. The auxiliary catch tank; is that blk or all colors. Once the auxiliary bottle is put in does this bypass error msg forever? Thx

[@ashleelucas197]

How do you open the printer to get to the heads? I have a ET-4700

[@bobross1028]

Did you figure it out

[@danawhitman8242]

Can you show how to save ink from et3760 and flush it out so I can put sublimation ink in?

[@katieintrieri6075]

Thank you for this video. I have followed all the steps and my Yellow appeared again! Question: the instructions on cleaner kit says to turn off the printer and not turn back on for 24 hours to ensure drying. I didn't do that because I was so anxious to see if it worked. Do you suggest doing this step, though? Thank you, thank you!

[@cbailey6445]

I have a ET 4700 and I can't seem to open the top. It has a copier and I can't get it open. Can you explain to me how to get inside please?

[@BestPrinters]

You may have to unscrew the top, to have access.

[@cbailey6445]

@@BestPrinters I don't see anyway to open this. I ordered your cleaning liquid and recieved it yesterday. Now I have no way to use it. Any suggestions?

[@kiaralaracuente6863]

How can I remove the ink on an epson et 4670 and replace with sublimation ink?

[@kendraedwards8288]

Do the same & after you flush it clean add your sublimation ink . I have an epson et 2720

[@johannekaram7552]

Thank you, but now that i've done that, i can't do the Power Head Cleaning until I replace the Maintenance Box. Please help!

[@jetspaz34]

Same. Just ordered one on Amazon

[@nicoleschlereth3156]

@@jetspaz34 After you got the new one, did it work? I have to replace mine as well.

[@jonathanball8918]

This video helped solve my printer problems, great job with this video

[@BestPrinters]

Glad to hear that!

[@richardvillafana8111]

Nice video, haven't tried it yet, but got a question. If you need multiple cleanings of each printer head, it doesn't seem like one bottle of the cleaning kit will be enough. The link says that it is only a 100 ml bottle. Unless I misunderstood, that is only enough for 5 cleanings. Did I misunderstand? I'm pretty sure that all 4 of my heads are pretty badly clogged and I don't think a single 20 ml cleaning of each head will be enough.

[@BestPrinters]

Message me on Amazon.

[@VeronicaMontoya-g2v]

The nozzle check only printed the blue lines. I flushed the black, cyan, magenta and yellow. the paper towel had ink from the black and cyan but the other too is just clear liquid. The ink tanks are full. I haven't put everything back yet to test. I wanted to see if this is normal? before I reassemble and do the nozzle check again.

[@BestPrinters]

Thank you for reaching out, THE NEXT STEP is to run a power cleaning. It sounds like you are in the right direction so far.

[@sandramaurais4]

Hello I did what you showed but now its telling me to replace the maintenance box where do I get that or is there a way to clean it

[@BestPrinters]

You can search for one using the links in the video description.

[@csamfinish4705]

My printer wasn't printing Magenta or Cyan. I watched this video and did the Power Cleaning task. That fixed my printer without having to do cleaning with the solution kit.

[@BestPrinters]

Great!

[@sdwarren4548]

Thank you so much for this video. I will be ordering my kit tomorrow and will let you know how it goes. I am confident that it will 100% work.

[@BestPrinters]

Good luck!

[@BrianHarmonphotography]

how do you get full access to the print head under the scanner? you jumped past how you got it open

[@BestPrinters]

If you browse my channel, you can look up similar printer, models, and those videos will most likely have that part that I missed in this video.

[@jimgilliland1722]

Note: If you open your printer and find that one of the small ink cartridges is empty, then you do NOT have a clogged print head. Instead you have a clogged ink tank! Ink is not being delivered from the tank to the cartridge. To fix it, put on your gloves, then remove the feed hose from the top of the cartridge. Make sure the syringe plunger is all the way down, so there is no open space in the syringe, then put the tip of the syringe into the hose from the tank. Pull gently on the syringe plunger, drawing ink from the tank into the hose. (If ink still does not flow, then you have a bigger problem) Then remove the syringe, empty any ink into a paper towel, and reconnect the hose to the cartridge. Reassemble the printer and run a power cleaning (it's the only way to completely refill the empty cartridge). The printer should now print correctly.

[@carolnewton3741]

Hi Jim, I just got my printer ET-3760, THANK YOU, I have now, with your help figured out, INK TANK is clogged. Ive had printer, converted to sublimation ink, I took tube off at cartridge, used syringe and pulled ink out, none has ever made it to cartridge, issue is, Power cleaning, it says i need to replace my maintenance cartridge, WHY? Its brand new.. Im so upset with Epson.. IF I can get ink tank to clean up, what else can I do besides power clean?

[@jimgilliland1722]

@@carolnewton3741 I'm afraid you've exhausted my knowledge on the subject. I put everything I know into the message above. For mine, that was all that was needed. I see a video to the right about replacing the maintenance box - maybe that will help you. Good luck!

[@ghwallace9]

Thank you so much for this tip. My magenta cartridge, which is the one that does not print, has very little ink in it, but the tank is 80% full. I want to make sure I understand that disconnecting the hose from the cartridge, inserting a fully depressed syringe into the hose, and pulling the syringe plunger out will, in effect, pull ink from the clogged ink tank into the syringe. If this is correct, do I need to flush the print head first AND pull the ink from the tank? Or do I just skip straight to your instructions? I'm sure my problem is that my printer sat for several months without being used. If anyone has any suggestions for preventing clogs during extended periods of disuse, I would appreciate it.

[@jimgilliland1722]

@@ghwallace9 No, there is no reason to run a cleaning cycle first. It would just waste ink, and the clogged tank would remain clogged. Just follow the directions that I posted, then (as my directions state) run a power cleaning after you have unclogged the tank so that all of the cartridges are properly filled.

[@ghwallace9]

@@jimgilliland1722 Color me happy. Even though I didn't have the cleaning kit, I made do with a medical syringe to follow your instructions to unclog the tank. Bingo! Thank you SO much for adding the tip about the clogged ink tank. Do you have any thoughts on what I might do the next time my ET-4760 is left idle for an extended period of time. The power cleaning DOES use a significant amount of ink. Thank you again!

[@elaineselesky3910]

This is frustrating bc my epson 4700 doesn't have options you're showing so let me know when you do..

[@BestPrinters]

ok

[@jetspaz34]

Had to order a maintenance kit in order to run the power clean 😢. Should be here Friday.. wish me luck 😊

[@BestPrinters]

You got this!

[@lesleydupree3129]

How do I open the printer to get to the print nozzles on a ET4700?

[@arttravelsmusictravels9013]

That’s what I’m trying to figure out right now damn what a downfall about not having easy access pop opening this et4700

[@arttravelsmusictravels9013]

Did u figure it out?

[@lesleydupree3129]

No. I end up purchasing a smaller version of the same printer, ET2720.

[@harrietfomison405]

I have this problem now. I think I will just give up and buy a different printer altogether. It's only just over a year old and the second printer to have this problem. So annoying!

[@tomvitale1]

I have an Epson ET-4700 - the system looks the same but accessing the print head is different - any suggestions for accessing? Thank you

[@nallelyescobar45]

Hi, can you help me with my printer I have an epson ET2760 I converted to sublimation and after not using it for a few months it look like the nozzles were clog band but stop printing at all after doing a nozzles cleaning. I try the best printer's cleaning kit but I had no luck. Nothing prints. Thank you

[@BestPrinters]

After using the kit also run a power cleaning.

[@1945temo]

Hello, I ordered the clining kit. I opened the printer and saw the cartige almost empty, with a syringe I took the cartige out so I could suction the rest if the ink and my aim was to use that suction effort to be able to fill up the cartige with the black ink but it did not work, it remaines dry, so I believe I will have to use the clining solution there too.

[@BestPrinters]

Yes this kit works best with pushing solution through, instead of using a suction method.

[@nicoleharder9103]

just wondering how did you get the paper out before finishing up with the power clean?

[@BestPrinters]

With the rear paper panel.

[@louisegordon5169]

2-17-23. The window for ink level is opaque and I couldn’t see level of black ink. It looks like it’s full. Any way to clean out the window?? The colors are working but rarely use colors. Thanks. Great you tube. I’ll order the flushing kit

[@BestPrinters]

Great! I am not sure how you would clean the window honestly, if you mean from the inside.

[@Irr23pr]

I had the same problem. I refilled my tank. And seen when it filled up all the color, then in a couple of minutes I can't see the colors. This is so stranged..

[@louisegordon5169]

Too.bad customer service in general is nonexistent nowadays

[@davidswingle1829]

Mine wasn't printing black or yellow on the test. However, just running the printer head cleaning routine under maintenance was enough to get black working well enough to print something urgent.

[@BestPrinters]

Great!

[@jboccino]

What if you can't get the cleaning solution through one of the ink print head valves - YMC worked just fine but with the black I can't get the solution through the little nozzel.

[@dianaflorez7850]

My epson 2720 is not printing nothing at all used printed the letter now is nothing is blank print I put new sublimation and nothing what I can do. Thank you so much for any help

[@BestPrinters]

Yes you will need to use the best printers cleaning kit.

[@amyrubin2103]

Great video! My Epson ET-4760 has been printing lines when printing in color. I tried ordering the Cleaning Kit on Amazon but it appears to be out of stock until mid-late November. My Epson ET-4760 is at my home in MA but I'm leaving for Florida on October 30. Any chance there's another source to get the Cleaning Kit any sooner?

[@BestPrinters]

My apologies. We’re currently having issues with our distribution. We should be back up next week. Please check back then.

[@amyrubin1786]

Thanks!

[@carolroseen382]

I am totally amazed that I really did this cleaning correctly and it WORKED ! Thanks for the help

[@BestPrinters]

Glad it helped! Consider leaving a 5 star review on Amazon.

[@timemachineeddie1146]

I purchase the et-4700 . Can you show the world how to collate with this printer? Thanks for sharing

[@stephaniewarren7157]

Only my black ink was not printing. I purchased the cleaner you suggested and Followed your video. I only used 5 ml of the cleaner. Put everything back together and it now says I have a scanner error that I not Epson can fix. Wish I would have just done a power clean.

[@BestPrinters]

Did you wait 24 hours before powering on the printer. The instructions clearly stated that and the cleaning kit packaging.

[@zacmasters4122]

What if a couple of the nozzle heads have a lot of resistance when pushing the cleaning solution

[@BestPrinters]

Warm up the cleaning solution and reapply.

[@rogerthomas1414]

I have ordered your cleaner. My problem is that I am unable to fill the ink tanks. I read that there is a chip that reads the bottle and type of ink. It seems the chip gets stained with ink. So I am trying to clean this area. I would appreciate knowing why I am unable to refill tanks with ink.

[@creativestudiobydeedee8942]

I've done every step recommended by Epson and have purchased this cleaning kit and used it twice. I've tried printing purge files. What can I do without buying a new printer?

[@BestPrinters]

Simply repeat the process, you can also watch the video I have on the 4850 model. There is some update info on that video.

[@creativestudiobydeedee8942]

@@BestPrinters I have repeated this process over and over. I watched the other video as well. I've used an entire bottle of cleaning solution, replaced the maintenance box and replaced the sub dye and still have clogs in the black. I don't know what to do next.

[@christinebegg6965]

I bought the Best Printers Cleaning Kit and just used and ran my power clean. So far the print looks much improved. However, the printer jams up when trying to print double-sided now. Is there a way to perform maintenance on the print rollers or can I replace the rollers? Thank you for your very informative video. Much appreciated!

[@BestPrinters]

You can manually clean the rollers but replacing them would be very difficult. I am glad your print quality is improving though.

[@frankguthrie2825]

You solution worked and my printer is back in business - thank you.

[@BestPrinters]

Awesome! Make sure to subscribe!

[@nicoleharder9103]

This video was very helpful and the steps were easy to follow, but my ET-2760 is still not printing! I did all the steps including the power clean and the nozzle check was blank, no colours including black. My printer has been sitting inactive for a long time and there was a few weeks gap between cleaning it and doing the power clean because i was waiting on ink. Is there anything else I can do to fix this?

[@nicoleharder9103]

also, i just tried to printer a document, and it had very faint magneta lines, a little small of text i could read (very faint and in magneta) and then also some ink blots (again magneta). do you have any tips for how to fix this?

[@BestPrinters]

Yes if you repeat the process and try using warmed up cleaning solution you should be able to get it to print.

[@nataliediaz7166]

Does this work on a printer you converted to sublimation as well?

[@marybruce7342]

i did it but it came out good and then did print head check and then print head cleaning but didnt do power cleaning- do i still have to do power cleaning?

[@BestPrinters]

No if the colors are coming out the way they need to, you can save yourself from having to do the power cleaning.

[@LORIORBERG]

Thanks! Great tutorial. I am up and running. Question: When I hold the power and ? button power wash does not work. Says I have to create an account for $9.99 monthly. Is that accurate or am I doing it wrong?

[@BestPrinters]

That is strange, but I'm not surprised a lot of the major companies are trying to sell subscriptions. You may be able to bypass this message by hooking up your printer to a PC and running a power cleaning from there.

[@scottthomas2750]

My ET-4700 has a scanner bed. I can't open it like yours to access the print head from above. What can I do?

[@BestPrinters]

There should be some screws that need to be removed then.

[@jannlavalley686]

Super clear instructions, thank you. I think I may still end up with a problem because I don't seem to be able to fill the tanks. I have the proper Epson ink to put in with their individually shaped attachments so I can't mistake which supply I'm putting in but when I invert the ink it just doesn't flow into the tanks. If I clean the tubes through would that get rid of a possible airlock?

[@BestPrinters]

You should be able to clean the tubes with no issue.

[@jannlavalley686]

@@BestPrinters I have cleaned the tubes and still can't get the tanks to fill with ink. I am using the Epson bottles and yet still nothing happens.

[@trishgrimes6691]

Thank you! Totally worked and was easy. I lost the screw to the print cage. Any thoughts on a replacement?

[@BestPrinters]

Thats a tought one, I would try a small screw replacement kit, here, amzn.to/3GIibGi

[@jeffg1524]

What's the diameter of the tubing? I have the syringe, and went to my local pet store and bought fish tank tubing. However, it's just a bit bigger than the printer nozzle, so when I tried to push solution through it leaked. I stopped immediately, of course. I just need the proper tubing and don't want to spend $25 for the kit. Thx.

[@BestPrinters]

Go through the trouble and drive around town or spend $25. I believe the diameter is on the Amazon listing page or under answered questions.

[@jeffg1524]

@@BestPrinters I was never going to drive around looking for a crummy piece of tubing. If I found out the diameter I would just ordered it on Amazon because I doubt I'd be able to find tubing that specific size around here anyway. I just went ahead and ordered the kit on Amazon. I fixed the problem after about five nozzle cleans anyway. Why do they have to make printers be such a pain in the butt and so expensive to operate? Out of all the tech I've bought over the years -- PC's, stereo equipment, kitchen appliances, TV's, etc -- the only one I regret is printers. I've never gotten all the money I've invested in them back. Continually and neverendingly frustrating.

[@ronaldparker6921]

I followed all the steps on my Et-4760. at the end it didn't run the power cleaning as shown, it just said Power cleaning complete. In a matter of seconds, I tired it agian it then asked me to change the maintenance box.

[@BestPrinters]

Try running it from your pc.

[@JustSayN2O]

Hello I am about to perform this procedure for my blue ink which SUDDENLY no longer prints even though my Epson ET 3760 is barely ten months old and has been printing normally at least several times per week using all four colors since new. So I have questions, hopefully you or the group here can respond . . . 1) Only the blue ink failed. The others print normally. So as long as I have the printed partially disassembled as you instructed, would it be worthwhile and reasonable to clean all four print heads as described in the video? 2) After injecting the cleaning fluid as shown, would it be helpful to then fill the syringe with air and blow that through to speed drying of the cleaning solution? 3) What would you say to those who have commented both here and on your Amazon printhead cleaning kit page, when they describe a lack of success after undertaking the procedure presented here? Thank you

[@BestPrinters]

Hi I have addressed your questions below. 1. Focus on cleaning the color or colors that are currently having issues. 2. After injecting cleanig fluid and going through the whole process, you will need to run a power cleaning. 3. As for the folks that didnt have success with my product. There are many scenarios where the printer is not fixable ( ie. the printhead is permanently clogged). Or the printhead required multiple cleanings and the user failed to continue and gave up. I hope this helps!

[@levelxxi7091]

Hello, I have a EcoTank 4700 and I am not able to access the default cartridges. The printer does not open the same way as the 4760. Is there another way to open the printer?

[@BestPrinters]

Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!

[@ludiblaceri6648]

It’s not taking the ink from the bottles. Could it be dry inside. I bought the cleaning kit and I cleaned out the heads

[@darrinsmith3193]

I ordered and followed this process as well. I put 30cc of cleaning fluid in the yellow until it ran clear. Placed everything back together ran the power clean. It took about 10 minutes, reprinted, yellow very faint. Hopefully you can help me if possible.

[@BestPrinters]

You will need to repeat the process.

[@natalypasillas8895]

How do I completely remove the ink from the printer... I have the epson ET-4700 and need to change ink but don’t know how to remove the ink

[@cpagan2953]

My blue is not printing, and all my colors are wrong expected for black. I have the ET2720 do you recommend to do this? If so How do I open the ink area my printer does not open to the ink nozzle like yours? Thanks in advance

[@BestPrinters]

Hi if the top of your printhead doesnt open then you wont be able to do this cleaning unfortunantly.

[@alvesaMsoto]

How would you do this process on an ET-4700 model?

[@BestPrinters]

Hi, it’s the same process.

[@lilymonster666]

I have the same question since the ET-4700 doesn't open the same way to get to the print head. The top of the printer doesn't hinge open so the only access point to the print head and cartridges is behind the control panel and you can't do much through that little window. I haven't found another way to open it all up like in the video.

[@ashleelucas197]

@@lilymonster666 I’m having the same problem have you figured it out?

[@sweetbasil21]

@@BestPrinters can you help out us here? Can’t get into the print head. How do we open the top part?

[@evelincameron7719]

I did everything and still nothing! I also replaced the maintenance box and it's completely clean even after I did the power cleaning (after the cleaning process). The ink will not flow inside the cartriges and when I tried printing, some solution came out. So no ink is going through the veins I think. So frustrating. What should I do now?

[@BestPrinters]

The only thing you can do is repeat the whole process and make sure your ink is full

[@Thecraftyblacksheep]

Will this work on an Epson ET 15000? I’m using it for sublimation and running into this issue where my nozzle checks are bad. I’ve done multiple head cleanings and printed multiple purge files to try to get this printer printing normally but it’s not working. Only improved mildly. I just unboxed off a few hours ago. I have a Sawgrass too and never had this issue once. Ugh.

[@BestPrinters]

Yes it will work with that model.

[@helencorrea3997]

Yes! It worked for my ET-15000!

[@rebeccaritch3631]

I have the et-4700 and I can’t figure out how lift the glass part the scanner to get to the heads

[@BestPrinters]

You may not be able to do it with that model.

[@rebeccaritch3631]

I found them, there where 2 screws under the screen flap on each side top corners

[@altalagidougan9172]

hello I having a problem with my printer. It does not print color at all. But all the tanks are filled with color. what should I do?

[@RICTOR464]

I have the Et 2750 and it won't print black even after cleaning 2 times using the procedure described. I did a power clean after 1st cleaning. It won't let me do that after 2nd cleaning until 12 hours. Is this printer done. It is only 2 years old.

[@BestPrinters]

No, repeat the process and make sure your ink is full through the whole process.

[@ladyrcb]

This was perfect. thank you so much I ordered the cleaner and used it just as you said. It is printing perfect now. thank YOU

[@BestPrinters]

Wonderful!

[@lanepoole5221]

Hi, I have an ET4700. My printer does not have a hood that opens like the 4760. Any suggestions?

[@dcooperify]

I just finished doing this and was trying to do the power cleaning. Message says to remove the maintenance box cover. Is this normal? Do you have a video about this? Mine doesn't have a screw as shown on the display.

[@FreyaF...]

I'm sorry to be a bother but I don't understand WHEN I'm supposed to do the power cleaning... before or after the complete flushing? Please advise 🙏

[@xrinnegan]

After the cleaning , I believe you hold the Power button and the question mark at the same time and then it’ll go into that mode

[@moonfaery170]

What did you place under the printer heads before injecting the cleaner and how did you clean up the mess left behind afterwards? It looked pretty messy.

[@BestPrinters]

Paper towel.

[@juliebodziak1546]

I followed you step by step and it worked perfectly! Thank you so much!

[@BestPrinters]

You're welcome!

[@ritafreels8410]

great product, once i finally got it on the black ink nozzle, it fixed my printing asap but have a question i used it twice to print after the power clean and got this scanner error...how can i clear this scanner error 031006 on my et-4750 do i need to clean something? do you have a video

[@williamgillespie8019]

I ordered the cleaning kit. The issue I am having is that when I print something with blank ink, the black has a sort of greenish tinge to it. hopefully this will fix the issue.

[@BestPrinters]

Yes the black nozzle needs to be cleared with the kit, it will fix that.

[@Hoondju]

I ordered the kit but needed to print something so i just did like 20 times of print head cleaning and it fixed itself lol. Had zero signs of fixing till like the 10th clean but somehow got fixed agyer the 15th cleaning lol

[@LittleBirdPianoAcademy]

I bought your cleaning kit and followed the isntructions. It worked like a charm, but about 3 days later it was clogged again. Is it common that it needs to be done more than once? I was thinking maybe the problem was inside my ink tanks, but there's no access in there. What do you recommend? Also, my printer stopped doing 2-sided printing. It basically says it's jammed, but I can easily feed out the paper using an arrow, so I don't think it's really clogged. Is there any help for that? Also won't. pull in the card stock that I've used for a couple of years. I'm hoping I don't have to buy a new printer.

[@nicholelease6652]

I got an Epson ecotank 2800 and converted it to sublimation. Can I somehow flush the lines and convert it back to inject?

[@BestPrinters]

Yes that would work.

[@85djac]

My black ink is not going into the cartridge so you have a video on that?

[@vanruel3123]

Its ojay to do it to empty your tank by using it everyday until it will empty bcz you want too travel and carry it with you? Its safe? My unit is L3251 epson

[@BestPrinters]

Yes but always leave a little ink at the bottom of the tanks. Or you risk the tubes drying with ink.