Beyblade X Launcher: Long String Beyblade Mod

Рет қаралды 16,719

Күн бұрын

Пікірлер: 41

@KujouCh 4 ай бұрын

If you're explicitly replacing the string, you can cut it off right where it goes into the handle and then stick basically anything in through that hole that will fit like a nail or small screwdriver and the plug will fly right out without having to mar up the plastic with a drill or anything.

@DeepakKumar-fi4os 6 ай бұрын

Imagine how op a rev launcher will be in beyblade X.

@BeybladeDad 6 ай бұрын

That would be amazing! I haven't found one to it with, but id be scared to modify it

@DeepakKumar-fi4os 6 ай бұрын

I had some nice bit gimmick ideas . Here's one Accel bit with bearings between the flat bottom and gears (gears and bit are both free rotating ), just imagine how much speed its gonna catch up and that too with less expense of stamina . Also making gears replaceable/switchable part so that a blader can use any gear ratio with any tip for eg a Ball bit with 16 gears,a metal bit with 16 gears etc .

@mysteriousshorts1767 6 ай бұрын

@@DeepakKumar-fi4osnoice ideas man!

@ValTek_Armory 5 ай бұрын

I feel it would be way too easy to self KO with the speeds those can reach. even a sufficiently strong launch with a standard winder is enough to send you out the extreme pocket

@zombiehunterG8001 2 ай бұрын

@@BeybladeDad can you modify my launcher

@AbyssHeroine 6 ай бұрын

Daddy i'm glad you are back! There was a long break from uploads few weeks ago. Like a year.

@giraton1 6 ай бұрын

You can use hand powered drill for getting at the handle. A pin vice + a craft knife is a much safer option over risking drilling your hand open with a power tool. Just a tip from a Warhammer Hobbyist.

@BeybladeDad 6 ай бұрын

Very true! Thanks for the helpful tip!✌️

@MegurokoSylveon 3 ай бұрын

Launcher Modifications are not tournament legal, Just Sayin. Only real Takara Tomy or Hasbro Parts are allowed, (Even Custom Bey Picture seems to be Illegal, bummer since it's only a cosmetic change in that case)

@Shirogarasu9 6 ай бұрын

What diameter kevlar line are you using?

@BeybladeDad 6 ай бұрын

I used 1.1 mm

@itz5h4dow 6 ай бұрын

can you do a mod for the metal string launcher? (or have you done that already?)

@mysteriousshorts1767 6 ай бұрын

He has already done it check out his shorts

@DemonicMk7 3 ай бұрын

What size string do I need to get? 0.4mm, 0.8mm, 1.1mm, or 1.5mm?

@BeybladeDad 3 ай бұрын

@@DemonicMk7 I used 1.1 m

@sephiroth2776 6 ай бұрын

Welcome back 😁😁😁😁😁😁😁

@ethyncarr311 6 ай бұрын

@Beyblade Dad I just had a question about the lead in beys I have only out of box Hasboro but they all test positive for lead ? I ordered them from beys and bricks and they were all labeled as Hasbro I just wanted to know if you think they are fake or if they have false positives possibly ? I used the same lead tests you use too it’s just concerning I wana play with metal fusion beyblades as I grew up with them but I cannot find any way to be sure all the lead tests seem to be inaccurate but you seem to have better luck im just lost at this point any advice helps

@VictorTRGYT_2911 Ай бұрын

@ethyncarr311 Beys and bricks is a reliable source and hasbro never puts lead in their beys, so it's likely a false positive

@Troy_Sent_A_Message Ай бұрын

Did you ever figure it out? I've seen a lot of post saying beys and bricks sells fakes.

@ethyncarr311 Ай бұрын

@ they do but they are marked as such just buy only hasbro and your ok if you want tt then it’s a bit harder to spot the real ones unless you know why your looking for and even then you can get duped sometiems but I use beys and bricks for hasbro beys mostly and trust that they are legit

@Smokey_the_mule 2 ай бұрын

Have you had any issues with the launcher? My coils have been slipping out of place while in use but i super glued it in place so it solved the issue for now...

@JustinOwens-cl3ht 14 күн бұрын

My metal fight string launcher won’t work now because the little metal pice that stops the string from sawing away on the plastic won’t stay in place. Can you plz help me?

@jinnyjinjin Ай бұрын

Thanks for the tutorial! I bought the same string and modded my launcher- it somehow is getting less power than the original, original I was getting consistently over 13k on the beyblade app, but with the added wingspan long string, I’m barely getting 10k, is there a reason? I speculated that maybe the tension of the shorter string actually helped the speed, but I’m not sure. What are your thoughts?