biggest mistake beginners make parking lot Striping

[@billydavidsonvip]

Promotional code for today only All Pro striping Course check out the link below and use the promotional code at checkout to save $300 today only BILLY499 www.billydavidsonvip.com/PowerWash

[@codysipes1919]

I'm interested in taking your paint striping course. I checked out the web site and I've got a couple questions before spend 800.00. couldn't find anywhere to speak with someone on your website

[@billydavidsonvip]

@@codysipes1919 call or txt 9853450778

[@lindenhoule5933]

I started using a t gallon strain bag for 5 gallon ..put suction thru hole tape up right above filter on end of line then close lid to hold top of screen in place never had spray mishaps since ..

[@omardelgado9562]

Thank you for the very complete video I wanted to know what is the correct or adequate pressure in the tires and in the machine to draw the straightest lines in an AirPort

[@billydavidsonvip]

Psi for spraying is around 1800 the tire pressure is around 10 psi depending on your equipment. Have you had a chance to take our online training class? We have nearly 14 hours of exclusive Video Training www.billydavidsonvip.com/

[@omardelgado9562]

Yes sr

[@billydavidsonvip]

@@omardelgado9562 hey can you give me a call tomorrow and I will go over some issues that you could be having with your machine

[@genogeno6643]

How come you never blew out the mulch that's collected between the curb and parking lot before you started spraying?

[@carychiasson9834]

I am trying to get the parking lot done at my church. I normally wash the windows. I noticed that the lines were getting really bad. I have been reading up on how to paint them. I can't afford a machine. I do have a very long pole that I use to reach the windows when I am washing them so I will put it on the four inch roller and pray I can get it done. I just saw how someone did it with putting two pieces of 2x4's next to the lines and painted it that way and it came out really good. I don't know what I am doing I am going to strive to make it look good. They love my work when I wash windows, and I learned on youtube. Not going to do the job until the new year. I am searching out where I can find the paint. I found some paint that I can afford. The guy that I am supposed to report to said they couldn't get the paint, it was back ordered six months ago. I just found some paint at a store near me. It's professional grade parking lot striping paint. Says it dries fast and is built to last outside. I also know when I am supposed to do the job again. I am always learning. I wish I could afford a machine. I did see one of the machines that you manually push the button. When I was online people gave it bad reviews. This will be my very first time to do this. Maybe I could do this for a job if I do it and people like it. I always try to make things look better than I found them.

[@johnm5469]

Thanks for that tip...I bought your all striping course and I'm just finished watching about half of it....anybody interested in starting a parking lot striping business,...go get this course ! It's full of valuable info. Billy and the team go all out in this course. Billy...send me the new added update to the course. Thanks

[@tonyalanb]

Recently started my company and Billy gives the honest truth on everything I’ve heard from him. Outstanding community dedication!!!

[@billydavidsonvip]

Thank you for those kind words

[@RepuBlicOfChaD]

Pro tip, instead of scrubbing the paint. Let it dry then redo it with the right paint color 👊

[@GabrielGenord]

Unless its dripping all over the place...

[@Yardman_876]

😂

[@rickwashek478]

I have got about 3 of billy's training courses they were all to do with pressure washing. He has great information to share so anyone wanting to know know how to improve your business Billy is the go to guy.

[@billydavidsonvip]

Thank you Rick

[@Steps.To.Sucess]

He’s a fraud just wants to take your money with the bs course he has

[@Bodilesss]

Every single video I pick up jewels to make me better. Thank you for all your hard work making them!!

[@billydavidsonvip]

Thank you Mr. Jim

[@omardelgado9562]

How long can the preeminent titan 3500 be kept on on the day of use?

[@billydavidsonvip]

We usually clean our machine out each day Thorley. You can also take our online classes to learn everything you need to know about starting a Parking Lot Striping Business! We have over 14 hours of exclusive Video Training in our class with a certificate of completion. www.billydavidsonvip.com/

[@allara5613]

What’s the best way to remove paint ?

[@billydavidsonvip]

Acid wash. Also, you can check out our online classes here. www.billydavidsonvip.com/

[@threesixty5295]

Can anybody tell me the name,make,model of that machine please. Thnk you

[@alfredoamaya111]

Looks like a titan 4955

[@billiebowling7755]

Looks great definitely better than the 4-in roller that I've been using

[@rubenl8498]

Sandblasting will erase all paint mistakes in about a quarter of the time

[@daspper1926]

I do striping and usually the old lines are crooked and uneven .any suggestions on how to get straight layout straight and even before I stripe it?I usually use yellow work crayon and a chalkline ...any tips will b helpfull..thanks

[@wallacewimmer5191]

Long time subscriber. Love the Lil knowledge nugget about lowering front caster psi. Smooth as SILK Mr Billy is. Stay safe my friends & keep hustling 2021

[@billydavidsonvip]

Thank you

[@NoName-be5ir]

thats an oil 5 ,using oil on concrete or latex in the 5?

[@oscarcalles7774]

Is there somewhere I could rent the machine?

[@NoName-be5ir]

what reason would you use oil vs using latex? and on new ashpalt oil or latex?

[@Hypnose420]

Latex really good for sealcoat, oil base will turn color onseal coat , oil base is really good for fresh layouts on new asfult ,

[@NoName-be5ir]

@@Hypnose420 I’ve put latex on older asphalt and does good but on new asphalt any issues with with latex?

[@Hypnose420]

@@NoName-be5ir no u can use it on fresh black top , oil base looks better though and lasts longer, I think, I've always used the old Kelly's pressure pots , latex paint is more for a line laser , just don't spray oil base on sealcoat the lines turn green

[@michaelcummings8119]

Billy great information

[@billydavidsonvip]

Thank you!

[@tedtederson9411]

Have any of you used a trueline painter?

[@billydavidsonvip]

Yes, I have

[@tedtederson9411]

What did you think?

[@erictaylor8099]

Really want to pull the trigger on my own company. Have 13 years exp (which is nothing) on parking lots, roads,airports. Only thing i dont want to really get into is sealcoat. But thats what all the customers will want..

[@makycaris4672]

I can’t get one parking lot

[@billydavidsonvip]

Have you a look at our marketing strategies in our online course?

[@rabbitskinner]

Can't you use a burner and burn the paint off?

[@billydavidsonvip]

Oh no huge mistake. We tried that many years ago and as soon as you start to heat up the concrete it expands rapidly and starts actually popping out basically like popcorn. He does not work and ruins the surface of the concrete

[@rabbitskinner]

@@billydavidsonvip they used to burn off the old bitumen based lines. I guess the new stuff is some kind of epoxy paint?

[@williamswashingg]

This interests me so much! I just started up my fleet washing business but I’m curious as to if I made the right choice....

[@billydavidsonvip]

If you decide to jump in this industry I'll be here to help

[@johngreene3376]

Quickest way is a wire brush while its fresh, comes off in no time

[@nikebull41]

Running a striping business… is it necessary to have a storefront?

[@billydavidsonvip]

It's not necessary but you definitely want to have an online presence that is constantly updated. If you need more help with running your business you can check out the link to my website in this video description

[@ibethtorres4884]

I want to learn to paint lines

[@billydavidsonvip]

Have you had to chance to check out our video training courses on the website. It's in the first comment section of all of my videos.

[@mondo8043]

On forever self employed you said quite the opposite on making a mistake. You said it was as easy as stopping and getting out wire brush and mineral spirits and a couple of rags and correcting your mistakes?

[@waltermh111]

Yeah but I feel like he does this to sell his course. Though he would be selling his course on the other channel also. Paint remover/mineral spirits and scrub. Can possibly pressure wash off with turbo nozzle to tear it off? lol But yeah, there are ways that dont take 8 hours.

[@BlackMetal0189]

He says this to scare people into buying his shitty course...

[@gunot7599]

Hey I started doing this what’s your best advice on cleaning it

[@Jacob96wv]

Repaint the right color

[@aleiterful]

How much does this cost in 2024?

[@billydavidsonvip]

Here is a link to my website sites.google.com/view/allproaccess

[@nickbrockelman]

11hrs? My friend, Invest in a high speed angle grinded and a very good quality twisted strand, cup shaped wire wheel. Takes about 20 seconds a foot to remove paint.....or weeds... Or skin.... Well actually the feed rate more than doubled on skin.

[@billydavidsonvip]

One time we spent nearly 8 hours as I stated in the video removing one parking line that was put down wrong on blacktop. On blacktop or asphalt you cannot use a high-speed angle iron whatsoever. On concrete it will definitely remove the top layer leave a shadow of paint penetrated into the concrete. It's really not the ideal way to remove a screwup or an old park in line there are better ways but none of them are easy. I've done it too many times LOL

[@luciancastillo1337]

Power wash it

[@nickbrockelman]

@@billydavidsonvip on asphalt steam is king. there are 2 method which i have both used and they do a good job.. even better when used together....steam or close to it hot water out of a decent powerwasher, preferably the kind with the auto spinning head..... secondly (or in conjunction)pouring very hot water on the line and the heating it with one of those long wand style propane weed burners that sometimes they use to melt ice on sidewalks with. splash the line and the torchit. paint should peel right up just dont let the ALL the water evap from the pavement. it is not only there to make the steam but also protect the asphalt. on concrete use the grinder but dont stay on just the paint thus creating a line of negative space. you have to be a bit of an artist but what you want to do is degrade the entire area a little , like blending in paint on an autobody job. Of course steam could work for you here too depending on the age of the concrete but it works much better on the asphalt 'cause as you can sure you know it's made from oil. I have had several power washers back in my day they were powerful enough to take the top layer of concrete off fully cured stuff

[@spacecoastbonsai1421]

One line would take eight hours? There’s chemicals out there you could apply and just hit it with a high pressure tip.

[@billydavidsonvip]

Not true

[@Hypnose420]

Awesome stuff

[@billydavidsonvip]

Thank you!

[@nc2432]

Titan must go graco 3900 with rider and 15 gallon hopper with pointer bar

[@billydavidsonvip]

Many years ago I try to Greco and it gave me nothing but trouble but I'm going to try one again here shortly and see if things have changed

[@nc2432]

@@billydavidsonvip you can’t swap paint in them can’t go oil then latex

[@billydavidsonvip]

Yes we swap paints all the time and our Titans. We found some nice little tricks to make it easy to switch between oil/latex or vice versa.

[@m.c.ddelgado7374]

Thank you for your video

[@hustlesmith]

Good stuff. Thank you.

[@QueensStandUp]

That 2850 is a terrific machine. I cut my teeth on a 2850. Give me one of those over any other machine.

[@mrvirgieking8502]

Ppreciate you droppin that sauce (info) on us Billy... every bit helps, thanks man!

[@billydavidsonvip]

Thank you

[@Top_Pulla]

You should allow us to pay weekly for school lol

[@billydavidsonvip]

Parking Lot Striping Billydavidsonvip.com

[@williamswashingg]

Hello Billy! I wanted to touch base with you in regards to the testimonial Mike and I were going to do with you. How did you want us to do this? I am down for whatever lol! Just let me know what works best for you and your busy schedule!! Thanks billy!!

[@wildwestwashservices7612]

Y'all make it look ez but I know it's not

[@redditor7548]

Little bit of fear mongering how you have to spend 8 hours if you make a mistake. I just go over with black paint and there is no problem

[@billydavidsonvip]

May be on asphalt but try doing that on concrete! Your customer probably won't even pay you

[@redditor7548]

@@billydavidsonvip my bad, yeah concrete you have to be extremely careful.

[@billydavidsonvip]

Parking lot striping CourseBillydavidsonvip.com

[@MANSBLOG1]

Just use a sandblaster😂😂

[@teda4284]

It’s pretty simple and quick to remove paint if you know how to do it. I’m thinking this guy knows better. Trying to scare you so you’ll buy his training video. His training video is probably great but to sell by using fear is something you see everywhere these days. It doesn’t matter if it’s factual I guess.

[@vcash1112]

Can you remove paint with a pressure washer?

[@bryancomeaux4961]

I invented this

[@yarah12stones94]

You dnt need to pay anyone.. If you want to do it, you will learn. Stop ripping people off.

[@billydavidsonvip]

We've had tremendous results with our students each of them or changing their lives as I type this message. Our students is our priority, and this is a trade that demands a high-level of knowledge and skill to perform properly and successfully. Code and regulations dictates that you must notice knowledge before performing the work. we are proud of our students!