Mercedes Sprinter Electrical Problems

[@BigVanSmallWorld]

MY Amazon storefront full of some great camper van ideas www.amazon.co.uk/shop/melsvan... If you would like a Sticker buy me a coffee and I will send you one. your support is really appreciated www.buymeacoffee.com/BigVanSmalWorld

[@Michael-m4y]

HI Mel just clicked your link for buy me a coffee and it does not work

[@BigVanSmallWorld]

@@Michael-m4y thank you for letting me know that's really kind of you i have fixed it now www.buymeacoffee.com/BigVanSmalWorld

[@Honky_Konky_Phooey]

I would be inclined to add a secondary Earth cable and replace that old one as well , remember the old mini’s when the earth lead failed it used to earth through the throttle cable and catch fire.The amperage the sprinter requires to start is high so more earths the merrier. Yet again another great informative video for those that are not so mechanically minded. Happy New Year to you and the family.👍❤️🇬🇧

[@BigVanSmallWorld]

Oh I remember the old mini that’s a good reminder thank you happy new year buddy 🥳👍

[@Ianjowett1]

that burned a mates vw camper in a big way never forget coming home seeing it on fire and killed the van

[@jimmyreuben6919]

Oh the joys of modern motoring Mel. Happy New year.

[@Defender200tdi]

Good advice, my defender melted it's handbrake cable while I was using the winch. Now I have 3 grounding points 👍

[@Ianjowett1]

also consider the meat used in terminals and salt on roads thats a thing . but get a new cable clean well and get the codes removed , they dont always after repair sometimes need the codes manually removing

[@CriftinsCampers]

May have been mentioned already, not going to waste my time reading all the other comments to check but fyi the switch is self adjusting you should pull the white plunger right out as far as it will go before fitting.

[@MrMaster72]

As suggested put another earth lead from engine to chassis and check battery earth to chassis.. To check voltage you must perform a volt drop under load on all earths and positives…using a multimeter on Volts. Simple to do,even .5V drop can cause faults. All fault diagnosis must start with correct voltage at sensors/consumers.

[@mhelander]

Give those cleaned cable ends good spray of self drying grease. It keeps corrosion away and protects those cleaned surfaces...

[@errolmagill1611]

Okay Mel, I was a mechanic - don't forget about the earth lead (and Positive connection) at your battery - clean up and secure those too. Serrated washers can help with getting good earth connections. When you have finished, coat the connections with something to prevent future corrosion. Your B2B charger could be causing some of the issues. Hopefully your on the right track with the brake switch, an interesting project for us all.

[@BigVanSmallWorld]

Thank you buddy that’s a great idea to use them washers 🍻👍

[@Ianjowett1]

i was going to suggest that too . good advice a dodgey earth can cause loads of bother .i often put a bit of copper slip on too , added connectivity and terminal protection

[@maceyevo]

Happy new year Mel , it doesn’t matter if it’s a earth strap or a cupboard door you explain it all so well

[@BigVanSmallWorld]

Happy new year thank you 👍🍻👍🥳

[@keith9868]

Mel Check the little plug from the alternator that feed the ignition switch

[@BigVanSmallWorld]

Cheers 🍻

[@rhiantaylor3446]

Love the CCR reference. I must have changed half a dozen VW brake switches, real pain they are. Back in the day I recall being told that telephone exchange battery connections (50v, '000s of amps) were usually lapped together with the fine aluminium swarf deliberately left in the grease/vaseline between the plates of the connecting busbars to improve conduction at the joints.

[@BigVanSmallWorld]

I’m glad 😀 someone picked up on that 🍻👍🤓

[@myarworth]

It will be worth understanding how the system is measuring the voltage as it may be the sensor/detection that's at fault and not the rest of the system. I've wasted good money before trusting sensors when they can also fail.

[@thegrimreaper7777]

If you bought a couple of cable terminals, you could re-use some of the cable harness you took off the positive-starter-alternator and make a couple more short cables up to add elsewhere, just cut any crappy ends off and get back to good copper and you'll save some money over buying a mercedes replacement part.

[@petearnold8020]

obviously could be many things and like you, ive done the process of elimination thing in the past. couple of things i would check is split charger? could you have a short off your leisure battery in the back throwing up a voltage issue on the vans ecu?. on the t5 and other vws i know yours is a merc... my regulator on the alternator packed up which was a bosch and easy fix but at the time a lot of people online said they bought a copy alternator or regulator and dash kept having faults pop up. the voltage regulator on the alternator throws it up. if the ecu thinks voltage is screwed it can affect running and obviously throws code up. worth checking those. good luck and hope you get sorted. that lead looked ok.

[@linz_in_nzdouglas3248]

You need a Haynes Manual Mel - one of the things it says is if you have intermittent or lots of different errors then check earthing points. I've heard the brake pedal switch can be troublesome as they can get quite damp/dirty in the footwell. Hope a new one fixes the issue.

[@BigVanSmallWorld]

That’s not a bad idea 👍🤗👍

[@Me-lf5oj]

Hi Me,l you could used some copper grease to stop any future corrosion and good luck

[@martintheshred]

Hi Mel. Great Video as always. I remember slow cranking problems on an old van I had being solved when an old mechanic told me to put two earthing straps onto my engine block (one each side). No more problems started fist time every time after that Keep up the good work Pall 👍👍

[@BigVanSmallWorld]

Thank you that’s a great idea 🍻👍

[@Alanniven292]

Hi Mel , I had a similar problem on an old cortina , it was diagnosed by the heat of the earth wire ...additional earth equals problem solved 👍

[@BigVanSmallWorld]

Brilliant 🍻👍

[@castaneasounds]

Thanks for this video, Mel! I’ve got a quite new VS30 (2021) having a similar problem with the battery light, seems like I have some parasitic draw happening, even though the alternator is producing 14+ v when running. Noticing continuity between the positive pole and the ground, so I suspect there is a fault somewhere happening. Thanks for the video!

[@MrPhenomenon1]

those 2 errors are related,possibly a load sensor or individual wheel sensors if there is such a thing,i would definately replace the brake switch first as a service item just to eliminate it,earth strap looks a bit weedy,i'd make a new,bigger one eventually,but thats not your problem

[@BigVanSmallWorld]

Thank you 😊

[@MrMaster72]

Ps don’t spray Wd40 into electrical connections…it’s flammable if there’s a contact (switch) it can get resistive corrosion and heat up..and catch fire. I’ve seen a few fuse box’s catch fire due to WD40/water repellent being used…it’s ok to use on connections to clean out but must be flushed out using contact cleaner afterwards and left to dry…

[@rosswilson7313]

Fingers crossed for you to sort it Mel....Keep smiling bud!!!

[@brianfd622]

We have a riot van conversion V6 3.0 diesel auto which had the battery light come on and various "limp" modes come on until the battery died, I carry a jump pack which got us off the M25. The following morning we hoped to be able to swap over a leisure battery (AGM) to get us on the way, sadly it was pouring with rain and only got us to B

[@BigVanSmallWorld]

That’s really interesting what was the fault in the end 🤞

[@brianfd622]

@@BigVanSmallWorld still not sorted yet we believe it is the linbus messenger wire on the alternator plug or to ground. Fortunately I have 2 of these vans so I may borrow the alternator off the other one to test the system. I’ll keep you posted Mel.

[@Fogg-yi8sg]

Hi Mel, just a thought but could it be your B-B charger at fault which is causing the the alternator/battery warning? Might be worth disconnecting the leisure side of the van and seeing if the issue still comes up?

[@BigVanSmallWorld]

Oh that’s really good idea thank you buddy 👍🍻👍

[@13yearsaprepperr.jtilbury.51]

Mel check with a VOLT meter from the engine to the chassis if there is any voltage the earth lead is high resistance , put extra earth leads to the chassis from engine

[@Tomlinsky]

Mel. Thought I'd share the physics of why checking ground leads before positive line first is a good idea and it gets deleted. Nice one.

[@BigVanSmallWorld]

Thank you buddy for the encouragement really appreciated 🍻👍

[@golfgtioz]

Good old German engineering Mel , my guess with you fault is a bad connection to your ABS module , if the module doesn’t get the desired voltage it could throw up a voltage fault ( newer Mercedes sometime have a second small battery to backup the ABS pump) it would also give you your brake fault code That my armchair mechanic viewpoint anyway 👍 Might be worth checking your abs fuse too, the 40amp one,

[@BigVanSmallWorld]

Thank you buddy that’s really helpful 🍻👍

[@golfgtioz]

No worries Mel hope you get it resolved, it could possibly be the earth strap as many have suggested but sometimes it’s worth seeing things from another perspective too. It’s not all black and white when it comes to chasing faults as I’ve learnt 👍

[@flybobbie1449]

Just had similar problem with aeroplane, bad earth. Battery became weak, barely turning engine. Gave impression battery was knackered. But found earth lead to starter and alternator loose. Turned out the lock nut was tight on shoulder of the mount bolt, but the eyelets were loose. Wire brushed, couple of washer and anti shake washer all sorted. I'm thinking now that problem killed another battery last year that was only 18 month old.

[@BigVanSmallWorld]

Thank you buddy

[@robtrueblood853]

Happy new year mel to you and Rebecca xx

[@BigVanSmallWorld]

Thank you buddy and you too thank you for all the encouragement 🍻👍🥳🎉

[@Memyselfandvan]

You should of tried pulling the brake switch plunger outwards, I had to do this with mine.

[@WhipperdeetsAdventures]

Awww no buddy no good poor Mary :( hope she be ok :( we both not having a great start buddy to the year. :( sending prays to Mary.♥️ Maybe get that negative cable new bud or keep it as spare? I really need to buy that diagnostic kit like you have that cheap £20 I have isn’t the same Sending big hugs buddy 🤗😊🍻

[@BigVanSmallWorld]

Thank you buddy

[@warty5007]

Mele you need a new earth lead they do corrode in your engine bay I had a problem similar to yours ,I tried lots of thing ,in the end replaced the earth lead then it fixed the problem

[@BigVanSmallWorld]

Thank you buddy that’s really good to know and encouraging 🍻👍🤓

[@uncledodge9396]

When I had my transit I had a similar issue, I actually added another two earth cables, one directly from the Starter mounting bolt to the batter and another from the block to the chassis, Didn't have any issues after that.

[@BigVanSmallWorld]

Thank you buddy that’s really good 👍

[@jonathonmilliken8019]

Hi Mel might be worth looking into but as the sprinter and crafter are the same, parts are interchangeable, I recently required a headlight switch for my crafter when I ordered from vw a merc part arrived in a vw box. Out of curiosity I phoned merc quoting the part number it was £50 dearer. Hope you understand this comment and that it might even save you a few quid🤞

[@BigVanSmallWorld]

Thank you 🙏

[@alanemmerson363]

Mel do a second earth Belt and bracers great vlog👍

[@Sue.242]

You are 1 very very clever chap. Hope these fixes sort Mary out. Or she might need a good sortin too?? Well done Mel Happy New year xxx

[@BigVanSmallWorld]

Thank you that’s really kind of you happy new year to you too 🎉🥳🍻👍🤞

[@glynatmore1817]

Hi mel You make your video's so instructional & So much fun. Your such a jolly chappie. Looking forward to your class act vids This year. Any new build plans this year ? Wishing you a very happy new year.

[@BigVanSmallWorld]

all the best to you to thank you for your encouragement and support really appreciated if I can get Mary running rite I plan on doing a lot more traveling this summer 🍻👍

[@campervancreations7656]

Mel, love the channel, just a thought, does the error code not relate to the load sensor rather than the brake pedal switch. They used to be a spring loaded switch but are now electrical switches. They increase the braking power to the wheels based on the load in the van. Just a thought. Jamie

[@BigVanSmallWorld]

Thank you I know what you mean and I’m as confused as well I think I’m going to have to go get it plugged in probably if the switch is not the problem 🍻👍

[@campervancreations7656]

@@BigVanSmallWorld your OBD diagnostic tool should be able to read the fault, try in the suspension section rather than braking, might point 👉 the way.

[@zx10rmac84]

Yeah Mel, new thicker lead, and new switch i think ✌️🇬🇧Happy New Year to both of yah. 🥃

[@BigVanSmallWorld]

Thank you buddy and you too 🎉🥳🍻👍

[@aberdeendeltaforce]

So glad I opted for the crafter 😂

[@xt7190]

Good vid Mel and kind regards, there are no mechanics now only Fitters mate, which makes getting a genuine part somewhat pointless? They are fitters cos all they do is Fit new parts which are designed to fail, genuine or not! HNY!

[@nikoloko5561]

Clever Mel left us wanting more ! Hope this year brings you and Rebecca peace and happiness. 👍👍👍😎

[@BigVanSmallWorld]

Thank you and you 🍻👍

[@peteranderton6521]

Mel, saw a video today which showed the alternator pulley detached from the vibration damping and slipping around, but looking like it was driving. Maybe an idea to remove the alternator and check the integrity and the drive pulley to the shaft. Also a friend of mine had the bearing fail at the back of the alternator where the diode pack is, which caused similar issues

[@BigVanSmallWorld]

Thank you for the heads up I actually fitted a new one 👍

[@peteranderton6521]

@@BigVanSmallWorld I know you did. It was the after market parts that had the issues. Anyway you are all sorted now

[@alec5860]

Hi mel, youve done your earth cable to the chassis, what about chassis to negative terminal on your battery?

[@BigVanSmallWorld]

Checked 🍻👍

[@spamelamungroo8854]

New genuine OEM earth cable from Mercedes cost me about £10 ($14 USD) so I'd personally just change it to rule out any doubt. My problem was intermittent starting and I changed the earth and Y cable before releasing that it was the starter solenoid. I'm sure you've already cleaned all the terminals and posts on the starter and alternator when you did the Y cable but if not then that's also worth trying.

[@BigVanSmallWorld]

Yes I clean them all thanks for the positive message I’ll get a new negative cable too 👍

[@paulluggar5964]

Suggest putting a parallel earth between your engine area and the leisure equipment, if the earths have different resistances then current can circulate in odd ways (paths of least resistance will take more current etc) with a fancy electronic alternator it may see a fault? Also don't forget to grease the earth connections as there are dissimilar metals there that will start corroding as soon as they get damp. I use spray white lithium 3 in 1 as its clean and sets like butter. Good luck with the electrical pixies! 👍

[@BigVanSmallWorld]

Thank you

[@Rick_Todd]

Looking forward to the updates Mel . Happy New Year to you.

[@BigVanSmallWorld]

Thank you and you

[@Chris-zm5mj]

Hi Mel, I would just add another earth bonding cable from the engine to the chassis, wont do any harm having a redundancy.

[@BigVanSmallWorld]

Thank you 🙏

[@RVingwithG]

Yep, GROUND came to my mind before you started! You can never have toooooo many Grounds! And not just to your farm (body) but to the motor as well!

[@BigVanSmallWorld]

Yes you’re absolutely right I may just add more 🍻👍

[@katcankan7129]

And through it all Mel keeps on smiling 😊💜

[@BigVanSmallWorld]

Good morning 🤓👍🥳🍻

[@katcankan7129]

@@BigVanSmallWorld Afternoon ☕😊

[@briansibley9123]

BLOODY MARY & not the drink , hope you fix her , & HAPPY NEW YEAR FELLA! May it be a GOOD 😊 ONE . ☮️❤️🎉👨🏻‍🌾🐑🥃👊👊💥🍾😇😇

[@BigVanSmallWorld]

Thank you buddy same to t🥳🍻👍🎉🤓

[@deenunya7735]

Get a New Lead Mel ,keep for a Spare or Vice Versa. There was another Vanlifer Cpl had same Sort of Issue with Charging Light If still the Same , check all Other Earths on Van Down the Chassis, Doors for Int Lights, Tow Socket if you have one It Was a Seperate Earth on theres, away from the Engine Bay. Have you link for that OBD and Price? Non Start might b li ked to the Brake Switch as a Safety. Do you have to depress Brake Pedal to Start it?

[@shadowandpancakes]

Love the positivity Mel

[@BigVanSmallWorld]

Thank you 👍🤓👍

[@normandiefenbach6571]

Hi Mell, Maybe nothing to do with your issue but I had weird issue with a Kia Sportage, central locking worked then it wouldn't brake lights did then didn't, Radio and ABS lights had issues in them, auto electrician and workshop change loads of stuff never fixed it, I Thought the car was haunted. then by chance I found the issue, the brand new battery had a broken terminal inside the battery, hit a bump and it would move inside then it would touch again and upset the computer. I had noticed the movement only slightly in the terminal, New battery all good and the old battery was showing 14 volts. Just a thought. good luck

[@BigVanSmallWorld]

Wow that’s incredible thank you 🙏

[@debbie62140]

Hi Mel. Is it worth disconnecting your DC to DC charger to see if the charging fault is still there? Just a thought.

[@BigVanSmallWorld]

Yes I did try doing that 🍻👍

[@BigVanSmallWorld]

Yes I did try doing that 🍻👍

[@fraserm7438]

Had this on a v6 diesel Mercedes couple weeks ago where the alternator warning light was on but actually charging fine, the plug that goes into the alternator that detects the voltage was broken / had a bad connection and therefore not picking up the reading, worth checking.

[@BigVanSmallWorld]

thank you

[@philwilliams23]

Gutted for you Mel, good luck with belt and switch, got my fingers crossed for you.1🤞

[@BigVanSmallWorld]

Thank you 🙏

[@ILikeThatchannel]

Really informative Mel, hopefully you get it sorted soon. See you in the next one…

[@BigVanSmallWorld]

Thank you 🤞

[@clivegoodge9933]

Mel make another negative lead up from the negative of your battery to the engine block it won’t do no harm

[@BigVanSmallWorld]

I was thinking about that too I’ll have a look see if I got long cable on the old positive one I took off 🥳👍

[@clivegoodge9933]

Good thinking Batman

[@martinbibby9079]

Thanks for the vid. As a fellow sprinter owner, we all have to help each other

[@BigVanSmallWorld]

Thank you and yes I agree with you it’s always good to share experiences 🍻👍

[@justinsmith6296]

If you decide to change that earth cable just spray the ends over with greese once it is fitted, it'll help keep the water out, and stop it corroding again.

[@BigVanSmallWorld]

Thank you 🙏

[@TheAdenau]

Hi Mel, you can't always trust the live data from any scanner (especially a cheap one like you're using), if you check the data after fitting the new brake light switch you may find it still doesn't read the 2nd circuit just as before. This sort of thing actually goes against what you said with it proving invaluable, because can quite often lead you up the garden path and then you end up spending more money on incorrect parts trying to diagnose by replacement, so then you got the price of the scanner and all the mistakes in parts it made you take, all the time fitting them and you STILL got the original fault. Does your alternator have a Comms wire? If this wire is broken (for example) it will still charge the battery but will still put faults up on the dash. In cases like this, you may have actually saved money NOT having the scanner and paying a auto electrician to correctly diagnose the real problem. Hope you sort it soon mate, thanks for the vids.👍

[@barryneville4703]

Just been thinking, if you have a good voltage coming from the alternator & a good voltage from the battery, it must be the voltage sensor itself that is faulty wherever that is?

[@darrynbird8111]

Hi Mel great content as always. It may be prudent to smear a bit of copper grease or similar on the cable terminals, good luck matey!

[@Michael-m4y]

Hi Mel , I would maybe think of looking for a new earth point steel to steel rather than steel to aluminium as it corrodes a lot quicker and may be your issue HAPPY NEW YEAR

[@BigVanSmallWorld]

Thank you buddy 🥳🍻👍

[@peterneal7160]

What does the Handbook say about that Charging Warning light? If the Earth cable solder has melted then in theory water could get in and corrode it? I would have put Vaseline or grease on both Earth connections to stop corrosion. What about the Battery Earth to Engine/Body is that good?? Drive belt may be slipping??

[@BigVanSmallWorld]

It says take it to workshop 😂🍻👍

[@geoffhoughton7064]

i have just had the earthing problem but on a transit. after spending two days cleaning all the conecctions it turned out to be a knackered battery. in my own defence i was told the battery had only been replaced 6 month earlier.

[@BigVanSmallWorld]

That’s interesting maybe I need the same 🍻👍

[@ivecodavey]

And i thought my iveco was bad u do have some bother with that merc I'd be replacing those bolts with stainless on the earth cable fascinating stuff 👍

[@kevinbrowning8786]

I had problems with brake light switch cheap enough from merc there parts arnt to bad to be fair bought one from euro parts had same problem put merc one on behaved fine after that My new mer on 18 plate new shape had problems with that earth strap it would start they change it and engine mount You could put some copper grease on the connectors to get better contact Because it connects via the engine mount the connection between the engine and the mount might be dirty also worth checking Another idea make up a lead and bolt an additional earth point on or get jump lead and put on the engine and find good earth on body or battery to prove. Or disprove hope you get it sorted

[@BigVanSmallWorld]

Thank you buddy 😊👍

[@vangeezerexperience]

My experiences is that WD40 is excellent to soften up crusty stuff, even on electric parts - BUT - one has to wait to use the part until the WD40 has dried out (at least 12 hours) I have saved my gauge panel twice that way..

[@travelingchalksworld5138]

Put a second earth strap on. Belt and bracers and all that. Had it on my VW trike so got told second earth strap. No more problems 🚐☕️☕️👍🏼🏴󠁧󠁢󠁥󠁮󠁧󠁿🌈🙏🏼💙❤️💙❤️

[@mathy210]

Try replacing the battery lend Rebecca's if possible

[@tonyfrancis9793]

Hi Mel, Have you tried disconnecting you split charging relay to see if this is creating you error message?

[@sunnycampers4249]

Happy New Year Mel. Really useful vid. Loved the old school comment re grinding valves. Real engineering 👍👍😊

[@BigVanSmallWorld]

Happy new year!

[@MrMaster72]

The carsoft should give a specific fault code for brake pedal switch fault and wheel speed sensors. If not it’s unlikely there at fault. If you can read the ABS/ESP control unit see what faults are in there? Assuming your voltage is now good (new leads) are there any CAN (controller area network) faults in ABS or engine ecu? If so possible wiring fault on loom that runs under vehicle to rear sensors etc..(rodents love copper wire!) Also known fault with small fuse box on drivers side (RH) shorting out causing voltage issues…✌️

[@BigVanSmallWorld]

Thank you buddy that’s really helpful

[@davesmith4413]

is there not a reset required to configure new cables usuall done via a computer guv

[@carold8308]

Woops I see now you just did use it- cool

[@conga7754]

You know I thought just watch all your vids and write down all the problems you have had. Then I could go out and purchase all the parts for a bit of preventive maintenance and hope to dodge some problems down the line. Only problem is I now have to stop and go out and buy another writing pad just to write them down...soooo many problems. Any advice before I part with my cash and buy what I had hoped was a above average reliable van....

[@BigVanSmallWorld]

That’s brilliant I’ll end up with a new van the way I’m going as for advice look for a van with full service history and record that way you know what’s already been done and replaced good luck don’t let my videos put you off I brought my van salvage it was destined for scrap so I kind a knew it would need work 🍻👍

[@colingough4566]

Have you tried disconnecting the B2B or split charge relay. Check your manual as most modern vehicles have more than one earth lead/point.

[@BigVanSmallWorld]

Thank you that’s a great idea 🍻👍

[@jonnysparrow5666]

Hi Mel, have you looked at the connectors on your ecu or ecu's if there is more than one. An issue there could be the reason you seem to be plagued with these problems. You probably have but thought I would mention it. Edit: this comment was for your most recent video! KZbin moved on while I made a cup of tea.

[@BigVanSmallWorld]

Thank you buddy

[@charlespatterson6561]

Hi Mel, After you replaced the alternator did you clear all historic codes from the vehicle, your alternator is obviously working if charging at 14v.

[@BigVanSmallWorld]

Yes I did 🍻👍

[@barryneville4703]

It might be worth getting another one of those earth cables, as the wire does tend to go black with age underneath the crimped metal O rings. This is especially the case with small wires. Although I dont think this is your problem on this occasion. What is the I-carSoft saying about this particular problem? On some vehicles the warning messages dont actually match up to what the actual problem is, Toyota's in particular. If you still cant figure it out It might be worth getting it plugged into a faut code reader at the main dealer, as it will be more specific.

[@BigVanSmallWorld]

Yes I’m thinking main dealer wouldn’t be a bad idea 🍻👍

[@garrybeard7718]

Fantastic video well done bud happy new year to you both. 👍

[@BigVanSmallWorld]

Thank you buddy same to you 🥳🍻👍

[@stephenhall4432]

Happy New Year Mel. Not a great start for you, but a very informative video. Could you please give a full demonstration on using the Icarsoft tool on the Sprinter. Hope all gets fixed soon, ready to get on the road again.

[@BigVanSmallWorld]

Thank you buddy

[@whu58]

As you say Mel, you bought a Merc van to negate these sort of annoying issues because its suppose to be a quality product = why I hate modern computer controlled vehicles - hope you get this sorted soon mate.

[@silvercamper649]

Mel can't believe how calm you are when spending money😂 But I know Mary is your pride and joy. Good luck Bill

[@BigVanSmallWorld]

Thank you 🙏

[@Mblackuk07]

Mel there is loads of tutorials on youtube with people adding a second negative cable it seems a common fault with sprinters

[@BigVanSmallWorld]

Oh really thank you I’ll have a look 🍻👍

[@Mblackuk07]

@@BigVanSmallWorld sorry Mel i should have said electrical faults due negative problems are common not specifically your problem my own sprinter had an issue where she wouldn't start first turn and apparently a lot of electrical problems are sorted with a second negative not an expensive fix if it helps a (lot of videos on youtube aboiut using a second ground fix point}

[@sixgearsvanlife7868]

good morning just seen your vid but have you tested the battery

[@BigVanSmallWorld]

I’ll have a go thank you 👍🍻👍

[@antonyblakeston8541]

Hi Mel, you messed with it and you broke it!!!!! hope you get sorted soon pal, happy new year to you both, say stafe!!!! lol

[@BigVanSmallWorld]

Thank you buddy happy new year to you to 🍻👍🎉🥳

[@MrNugget425]

Did you leave tools in the airbox? Thanks Mel, useful to know if mine goes.

[@BigVanSmallWorld]

Yes just the dip stick for the auto box keeps it safe 🍻👍🤓

[@MarkJones-fl5oc]

Any thoughts on best way to cover holes, removed a roof rack, though need to plug the holes

[@BigVanSmallWorld]

I always use this stuff it’s great amzn.to/3HRV9uf

[@patrickvanreeth7355]

Hi Mel, did you check the negative connection between the actual alternator and the engine itself ? The positive side is screwed on, but the negative side might just connect through the tensioner... If negative can't propperly flow to the engine, the rest will never get enough power (voltage can still be ok, while amps are not ) All the best (y)

[@MrMaster72]

Alternator earths through its mount to the engine block…the earth cable Mel repaired earths the engine to the chassis. The battery earth is direct to chassis so the circuit is complete..🤟🏼

[@patrickvanreeth7355]

@@MrMaster72 not going to discuss, but no matter how it earths, since this connection has not been touched, it could have built up oxidation.

[@BigVanSmallWorld]

Yes buddy I put new alternator on and clean all contacts 🍻👍

[@BigVanSmallWorld]

Yes buddy I put new alternator on and clean all contacts 🍻👍

[@kenmackenzie7338]

Hi Mel from an electricians point of view the cable is okay mate

[@BigVanSmallWorld]

Thank you

[@anfieldroadlayoutintheloft5204]

goods vid mel keep up the good vids thanks lee

[@camillaellem6647]

Hello from Australia! I have the exact same problem. Did this fix it!?!?!

[@BigVanSmallWorld]

Hi Camilla I’m sorry to hear that your having issues I did manage to fix the problem have you seen the follow up video I posted I’d highly recommend watching it it’s worth doing what I did as it fixes a major issue with sprinters good luck hope this helps 🤞kzbin.info/www/bejne/o57IfXymgbWJeJI

[@Leatherkid01]

Those negative ribbon (as i call it) lead, linking chassis ground to the body or part is not as good as an actual thick cable similar to the one on the negative batt terminal(usually a jacketed thick heavy cable). If/when i do need to replace one, i replace it with the one similar to the negative batt cable (at least in size). Being in the snow belt area.... And high use of road salt... Those ribbon ground straps rots out first. Another tip is once replaced, and the bolt makes a good connection, i would apply some dielecteic grease or rust proof spray on the exposed metal (bolt head and eyelit) to stop it from corroding) Problems like this will never happen again in most cases. Knowing my luck, it would be faulty in the dead of winter at - 10C in the middle of a blizzard 🤣

[@Benjamin-gp3dl]

Any thoughts on why headlight bulbs frequently burn out on a 2016 Sprinter 2500?

[@BigVanSmallWorld]

No sorry

[@carold8308]

Did you try your diagnostic detector

[@BigVanSmallWorld]

Yep 👍 🤓👍

[@sixgearsvanlife7868]

any joy about the battery

[@BigVanSmallWorld]

Not yet

[@royshamrock3293]

Happy new year mell... Be good idea to put one other earth led to the engine. So you have 2

[@BigVanSmallWorld]

Thank you buddy that’s good idea 👍

[@elldees4071]

Hi Mel, is Mary stop/start? I do know alternators and battery changes are sometimes problematic. Could possibly be the feed back to ecu faulty as you said you have 14+v but Mary’s brain doesn’t seem to think so. 👍🏼🤩👌🏼

[@BigVanSmallWorld]

Hi like your way of thinking thank you 👍🍻👍