BIKE PAINT DIY - candy spray paint on aluminum rose the bruce

[@ethanbuehlig]

Can you do a video on how to make decals at home without the cutting Machine?

[@ETOE]

Please watch this video: kzbin.info/www/bejne/aGead6yiis2Wq5o

[@geckolord0337]

No way, that frame is the exact same as one I have for a project bike. It's the entire reason I'm watching this video. Perfect

[@ztarwars2598]

Rose the Bruce Frame ✌️

[@arneheinrich243]

wenn du es lackieren möchtest ist das Video 2 in 1 😂🎉

[@joen3992]

This video is the most detailed you've given so far in regards to painting with spray cans. Thank you for sharing Marin. And God Bless!

[@digitizeproductions4894]

Ohhh FFS Martin, I finished sanding my primer yesterday and was going to spray basecoat today, not sure i can do it without watching this in case it's inspirational and changes my plans (new CF ebike frame, self build, going for a super wet look black gloss) So far everythings going great thanks to your videos, thank you.

[@digitizeproductions4894]

And a question if you don't mind, can Cerokote (mc160 ceramic clear) be laid over normal 2k clear?

[@Daniel_Dizzy]

I love your sincerity, and probably the most detailed DIY bike spraying process i've seen till date.

[@Daniel_Dizzy]

OO Awesome Sea Shepherd Banner!!

[@deecaliloilo6732]

Your videos helps me a lot in finishing my first bike frame repaint using spray paints. All of your works are awesome!

[@meteturhan3505]

I love watching people who loves their jobs.

[@carlito5011]

Gorgeous paint job! I'll be taking on my first paint project this weekend... Thanks for the tips!

[@ETOE]

You are welcome.

[@luciesikorova3484]

hey there, i have a question. You have an another video with aluminium bike paint job. In that video, you mention that when doing a paint job on aluminium bike, always use 2K Spray Max primer. How come you're using a primer dedicated for plastic materials in this one? Thanks for your cool videos!

[@thewolf8927]

Definitivamente eres el mejor!!! Saludos desde México

[@tommylove8704]

That looks phenomenal. Questions: 1. The transparent primer you are referencing is a, "Plastic Adhesion Promotor", is this correct?? 2. Is there no need for sanding between primer coat and paint? 3. Is there no sanding between paint and final clear coats?

[@iraqirestoration2991]

Hello my friend I wanted to know if required to wash the frame with water after sanding in both stages after sanding the primer and the paint or clean it with paper towel only ?

[@tilorichter8168]

FLEISCH PEITSCHE mit Bautzner Senf ;-). Einfach phenomenal! Sehr geiles Video!

[@nektin9923]

You are so entertaining and I love to watch all of your videos ♥ Love from Philippines 🇵🇭

[@ETOE]

Thanks a lot.

[@geckolord0337]

Definitely know what's on my agenda tomorrow. Looks sweet and cant wait to watch

[@JerickoReyes-z3q]

Hello, can i use lacquer thinner to use as a degreaser before spray painting my aluminum frame?

[@Xavi-Tenis]

Hi Eto! Nice videos, a question, and if i like to leave the raw aspect aluminium in the frame and wich coat trasparent need for protect the raw aluminium.?🙋🏻‍♂️ Thanks in advance

[@chrism5433]

Good day all. Question i got my aluminum frame bead blasted. Should i sand it or just prime and paint ?? The frame is thats grey color after besd blasted ?

[@timbradt5765]

Interesting. The link you have for the US for primer is plastic adhesion promoter, which I thought was only for plastics. I thought for aluminum you needed either self-etching primer or a DTM epoxy primer. Can you explain?

[@timbradt5765]

Never mind. 🙂 I found your Q&A videos and you answered this question directly in one of those. You recommend the exact epoxy primer I have in my Amazon cart! 😆 Thank you so much for creating this channel. I love watching your creations, and you have great info for helping us know how to paint our bike frames. I'll be able to take my 15 year old bike with chipped paint covered by nail polish, and make it look brand new again!

[@iraqirestoration2991]

Hello I have a question do I need to wash the frame after every sanding process because to me I think it’s necessary to keep it clean but not sure please answer me

[@bucketlist.original]

How long could a properly done diy spray can paint job maintain its color before the sun weakens its saturation?

[@ETOE]

Twenty or thirty years

[@fabianhulk9275]

Guten Tag dir. Ich habe eine technische Frage. Der 2K-Klarlack löst die 1K-Lacke darunter nicht an? Ich habe vor einen alten slurshnen zu lackieren und über der primärfarbe (1K) mit Metalliclack (1K) eine dünne farbschicht aufzunebeln. Besteht dann die Gefahr, dass mir der Klarlack den vorher aufgesprühten Lack löst?

[@ETOE]

Ja und nein, je machdem welche 1K und 2K Lacke du nimmst und wie du die Verarbeitung machst.

[@amc1974]

Lol, great sense of humour man, and amazing work as always.

[@nunogoncalves5579]

Hi Martin, keep the good work, amazing job. I have one question i cant find those colours from spray max, are they anodized or candy? I would like to go top quality so if possible use all products from Spray Max Thanks

[@ETOE]

They are candy and not officially available.

[@cub2446]

Extra thick meat whip? Are you subliminally advertising your German death metal band?? Haha! Love it!

[@randomme0no]

Thanks. I want to do this. I changed my mind and will return the montana gold and get these paints. is one can of primer, pro red, pro yellow and 2k clear enough? dont i need to paint silver after grey primer? ie - Base Metallic Silver Coarse - Kustom Canz - Urethane basecoat? sorry my costs are balloning just stickers are $50 :( plus parts on my 1996 Rocky Mountain Hammer)

[@GriffisKanal]

Moin Sehr gute Arbeit Leider hat mein Bike ein paar leichte Beschädigungen Ist es möglich zuerst zu Grundieren und dann z.b Chrome Lack zu nutzen ? Welche Grundierung unter dem Chrome ?

[@ETOE]

Für Chrome muss vorab beflammt werden und spezielle Chromlack Grundierung verwendet werden, die es zum jeweiligen Chromlack dazu gibt.

[@gsoderer1]

Servus Martin, Weltklasse Video....kurze Frage, muss ich einen Stahlrahmen auf die selbe Weise vorbehandeln? Besten Dank für Info und deine Videos!

[@ETOE]

Das einzige was du musst ist atmen, essen, trinken, scheißen und sterben. Den Rest kannst du dir aussuchen.

[@Murrell84]

This weeeeeediiiiooooooooo 🤣 keep up the great videos man

[@TheSalladMan]

what's your recommended way for removing paint from an aluminum bike frame?

[@ETOE]

Mediablasting like in this video kzbin.info/www/bejne/f2iZmIp4i6eHna8

[@alanhaze3192]

Any advise on preparing a shop finished bike for custom paint job?...gruss...alan

[@ETOE]

Yes check out this video: kzbin.info/www/bejne/f5rUiKxjf711bZY

[@GriffisKanal]

Am Wochenende wird lackiert Das Reinigen direkt vor dem lackieren nochmals mit dem mipa oder normalen Entfetter ?

[@halfwayj2766]

What is the best way to remove the previous paint job on an aluminum frame? Paint stripper? Sanding? Wire wheel brush?

[@wayneclement7201]

Great video, love all your content but im guessing this one resonates more with your average painter! Its how i'll be painting my first frame, so to see someone as talented as yourself go back to basics is very helpful

[@tobyybot]

Could you please do a DIY video on how to paint over chrome? I have a bike where the chainstays, bottom bracket and some of the downtube have all been chromed - I would like to paint over them, leaving the driveside chainstay chrome exposed...

[@Jack_W_Roper]

I’ve just found your channel and absolutely love it! Thank you. A couple of questions if that’s OK. Are you sanding in between coats of primer / colour / 2K? Or is that not necessary? What temperature is your spray room at? Just thinking about curing times. My garage can be cold! Thanks again Jack

[@ΠαναγιώτηςΘεοδώρου-ι8ρ]

He makes it look so easy!

[@muaferruh]

Can I use this product for the first layer bonding? Spraymax 1k plastic adhesion promoter

[@davidcipcigan1332]

Hallo Martin, der Rahmen sieht richtig nice aus :DD wäre es vielleicht möglich dass sie ein genaueres Video zum Thema Spray-Klarlack machen ? Also wie man es richtig auftragen muss, worauf man achten muss usw.

[@lawrencesteenstra462]

no sanding between coats? Because it's Alu or because it spray cans?

[@hungovertv8707]

Great job. What is the primer you used here? The links in the description is not the same can in the video. Thanks

[@ETOE]

plastic primer same stuff like in the description but other brand.

[@hungovertv8707]

@ETOE thanks, is plastic primer the best for aluminium. Montana makes primer for aluminium and plastic, so what would be better for aluminium frame?

[@tj4055]

Hi Martin, In manchen Videos schleifst Du die Rahmen zwischen Grundierung und Farblack sowie zwischen Farblack und Klarlack. Wieso hast du das hier nicht gemacht? Und würdest du diese Schritte bei einem Stahlrahmen machen? Liebe Grüße

[@ETOE]

Nein auf keinen Fall das würde ich nur bei einem Holzrahmen machen. Hatte diesmal keine Lust. Viele sind ja extrem faul und ich wollte auch mal ein Video für die faulen machen.

[@tj4055]

@@ETOE Haha sehr gut! Also nochmals zum Verständnis: Am besten zwischen den verschiedenen Lackschichten mit einer 800er Körnung nass anschleifen, oder? Mach weiter so coole Videos. LG

[@marcusjangefelt8510]

According to you´r links, you used a plastic primer, is that right? I´m having trouble with my primer and are trying to find a working one. Tried Montana aluminium primer, but it did not work right, and then an etching primer, but it did not etch...

[@ETOE]

Yes I used a plastic primer as shown in the video.

[@yorkshiredroneflyer7029]

can i use spraymax 2k wash primer on an aluminium frame, or is it the wrong product?

[@steveanthony2398]

What font did you use? I can't find that information in the description ;-) I do love the "flesh whip"

[@bourne71]

Great videos. You're truly an artist. Amazing work. I want to paint an aluminum frame and I think I want to fade black with fluro yellow. Which color should I start with? Fade yellow on to black or vice versa? Thanks for your inspiring videos. 💪

[@ETOE]

With yellow.

[@linabrooks7517]

Does ammonia have to be 29% , would 25-28% work ?

[@myattunthit9539]

Thank you. You paint job is amazing.

[@ETOE]

Thank you! Cheers!

[@ctvtec2428]

Was wondering.. have u tried repaint the shimano crankset…. 105, ultegra or durace

[@ETOE]

yes.

[@bitcoinanabasis]

Great video Martin, but a little confusing. I want a gloss black fade into bare aluminium but I think you used to say transparent aluminium primer is not available. Looks like you got a good result from adhesion promoter for plastic. This is what you linked in the description. Shall I try this too?

[@ETOE]

Only if you degrease the frame like I did.

[@davidmaerz2756]

@@ETOE What was the bare aluminum frame sanded to for grit? Should I polish the frame or go with 1000-2000 grit before the adhesion promoter?

[@alexeyagapov6800]

@@ETOE will the primer for plastic also work for the galvanized steel (faux chrome aka zinc I guess)?

[@christofferlol]

is one can of each enough for a full suspension mountainbike? 1 primer, 1 paint and 1 clearcoat

[@ETOE]

If I do the paint job yes.

[@christofferlol]

@@ETOE ok thank you

[@christofferlol]

@@ETOE i went to my local car-paint shop and talked, in your videos you wetsand the color before you add clearcoat, they said wetsanding metallic paint will ruin the ''metallic effect'', is this correct? i dont know who i should listen to

[@lipglop]

I want to strip an older aluminium frame and then polish it to have a natural finish. After polishing the frame will I still need to degrease it before using a clear primer and then finishing with a 2k clearcoat. I would like to see you do a project like this and am sure many others would be interested as well. Love your work. Thanks in advance for your help.

[@ETOE]

Yes I will do it! Maybe in one or two years when I have the money for the material I need to do it. Currently is no money left to finance the project.

[@putrid.p]

Would you get a better finish on the clear coat if you sand with a fine grit between costs?

[@ETOE]

No need to do that. The finish on the frame is high gloss as shown at the end.

[@hanzohasashi1116]

I’m going to take this concept but flip it. I’m going to paint it this way first. Then put my stencil and then a top layer of matte black so my design is this dope color fade but also gloss design with the matte background to really make it pop

[@mathguy829]

Hi Martin, why didn't you sand between or after the clear coats? As I recall, in previous videos, you sanded between clear coats. Thanks in advance.

[@ETOE]

No need for sanding cause I`m not on the beach today.

[@Babolatplayer]

Hey Martin. I know the video is a little bit older but I was wondering if you still have to use the ammonium degreaser even if you prepared/cleaned your frame with professional media blasting before or is this only important if you sanded the frame on your own? Btw your videos are awesome.

[@WaiZiO]

ALWAYS degrease before primer, it won't be clean even after blasting. It's a must if you want to do everything good.

[@callmemumar6590]

I hope my comment will be noticed. Can you make a video of rigid fork and rim that will suit at that color of the frame? I am building a bike and i want that color. Thank you.

[@defendi15]

Hello Martin! Beautiful job. I need some help. My bike its a alluminium frame and i want to change de color. First step, i have to remove the original color, what do you recomend to me, remove with a paste remover or by sanding? Second step, after i remove the original paint, what water sand do you recomend to sand to aplly the primer? And what water sand to sand the primer? Third step, the main color, will be yellow, but some details a want be to in black. For the result i want, i have to paint some parts in black, paste the stickers and after paint all the frame by yellow? Or to dont have color difference, i have to paint all the frame with the color of the stickers and after paint all the frame with the final color?

[@newChiller]

Sanding by hand will take forever, if it's an aluminum frame you can get it stipped chemically for below 50 Euros / Dollars.

[@SirInkognito]

Great Work, like always! ... You motivated me to paint my bike a couple months ago. I'm considering to paint my Alu-Frame with a faded blue/green color. Most of the cans I could found require a glossy finish. But I would like to have it in matt. Can I go for it? I'll make a video u'll hopefully react to :) By the way, could u recommend a spray can for my usage? I'm considering to get the "STI-Design Flip-Flop composite GB"

[@deathlock0026]

Super paint job bro

[@rusterkat1188]

Can you do a quick video on all the stuff I need to do this myself? Thanks!! 😉

[@Revebenatgportiontv]

please did you print the stecil before cutting,what's the name and brand of cab spray you used?

[@Revebenatgportiontv]

*can

[@RTHines]

Its in the description, like he said in the beginning

[@Joni_I]

Do you recommend doing all paint layers including base coat in 1 session? Or can I let my primer layers fully cure first and start with colours + clear later?

[@ETOE]

Yes I do it in one session.

[@montanajones8393]

I've watched & re-watched this video so many times, I'm starting to dream in color. I've painted an aluminum hard tail following your instructions & couldn't be happier. To get the same results with a steel frame, would a different primer be required?

[@retrobikechannel2599]

Idont think these candy colours can be used on steel frames because you wouldnt get the shine through you get from spraying directly on to alluminum.

[@matthias6439]

I would love to try this! Can you please share what Materials you used and where to get them?

[@ETOE]

Maybe you should watch this video!

[@matthias6439]

@@ETOE and here thought I was giving you a mental breakdown. ... I watched most of your videos, martin. They are all splendid and anyone with half a brain checks the video description on their own ;)

[@mycyclingtour8566]

Been following ever since i first saw you painting and sooner ill try also to repaint my own bike frame.im from Philippines

[@christopherstores9668]

Could you do a customised paint job redbull rampage edition SCOTT GAMBLER 30 FRAME

[@winslow7Max]

Just did my DIY this wk turned out good for a first timer thanks and Godbless

[@lipglop]

Is it necessary to sand the clear primer or did you spray the colours directly onto the frame after the primer?

[@ETOE]

no

[@johnharrison7386]

While this is clearly an aluminium frame, I wonder if you could advise if you need to sand a Matt black Chinese carbon frame or if it’s ok to just prime and paint over?

[@ETOE]

The only thing which needs to be sanded is a butt after a big poop.

[@johnharrison7386]

@@ETOE thanks.

[@Brandon-xp1ob]

Ha ha. Glad i found your channel. Nice! No need to wet sand anything?

[@coryjohnson3743]

that frame turned out great

[@ETOE]

Thank you.

[@jaktoolz]

What brand of frame is that... I love the outcome..wanna do it on my project bike too

[@ETOE]

Rose

[@XWA2203]

Fleisch Peitsche 🤣😂🤣😂 wow! You should have chosen a hot pink / purple candy for this 😜 But this combination is just beautiful! I love it! Mein lieblings Senf! Schöne Grüße aus Berlin!

[@amc1974]

@ETOE Hi Martin. Would you have any recommendation on primer when (DIY) painting a steel frame over a 2k primer or an etch primer? cheers

[@100kmp]

Luv your videos because of your energy or is it the paint fuem...

[@wathmas]

One the most entertaining and informative videos I've seen in a long time, subscribed..

[@johnharrison7386]

Hi again. What primer would you recommend for painting over a Chinese carbon frame that came with a Matt black coating from the factory?

[@ETOE]

The primers I link under my carbon painting videos.

[@thomasbryan57]

Brilliant videos Martin, do you ever get any glue residue on the frame after you remove the vinyl stencil?

[@ETOE]

The only sticky residue I can find is the one on toilet paper. But that`s not a topic I like to talk about.

[@johnmoran959]

May I ask why a plastic primer and not a self etching metal primer?

[@ETOE]

Yes use self etching metal primer if you think you can.

[@johnmoran959]

@@ETOE first awesome job and love the video and info. Is self etching hard to use and also do anything different if your fork is carbon ( plain black ) ?

[@R_milan]

Did you do two layers of candy paint or is just a single layer enough? ( I'm planning to do something similar so I need to know)

[@Lorenzo-vz6mj]

Hi man! great tutorials and vids, im about to go full on on a bike repaint and happened to have found a couple of you're video thats really helped setting things up. i need a pair of infos though, my frame is aluminum ( painted). so i'll have to strip it down first , (probably fine-sand blasting if i find someone near where a live). is the 2k primer that you've used in another video a better choice even for aluminum? i don't want any "exposed alu" part so i guessed it's more strong? also, any chance you can get me the ebay store link that set you up with the " supermeme" decals? i'm from italy and i can only find my original model in Australia and shipping is like 3x the cost of the item!! thanks ! keep it up!

[@nej113]

Is it worth it to get the frame sand blasted if you’re painting a non candy color? If not do I have to primer it after sanding or or color directly on the sanded whatever paint is on the frame already?

[@ETOE]

Yes

[@aleks.denour]

Meat whip, extra thick. Best design ever :D

[@fastestmilkman3840]

Thank you Martin, really detailed video and perfect for me as I am about to paint my steel frame! Do you need to sand down the clear coat for metal frames or this process only apply to carbon frame?

[@ETOE]

I don`t need to sand clear.

[@chriscross5689]

@@ETOE so just sand primer? And base coat if applying one?

[@1967haronbinali]

Hi Boss can you help me to spray my bicycles frame thanks ( Singapore )

[@TheDromen69]

Hi, I haven't seen any video paintung on plastic that accepts some flex, i.e.a motorcicle covers or somthing like that. Would be cool to watch gow you would paint ir

[@tomhundreds3180]

Could you do motorbike fairings? That would be awesome to watch in the way you make videos

[@ETOE]

Maybe in twenty years when I have enough money to afford them.

[@jnenbt]

Könntest du einmal ein Video zu einer metalflake-Lackierung mit Dosen machen? Bspw. Montana Glitter + Candy Lack o.ä?

[@ETOE]

in dem video verwende ich Glitter: kzbin.info/www/bejne/pmTEq2aQqryUe5Y

[@jnenbt]

@@ETOE hab ein Video dazu wie ich es mir vorgestellt habe gefunden. Allerdings ohne Candy kzbin.info/www/bejne/iWiaZaFsirSlZqM

[@ARIVEstyle]

Master of masters.

[@sbeggs73]

How about a video on prep and paint suspension forks? Crown and lowers.

[@zanesimmonds5306]

Can you do a video going over painting bike forks like the fox 40 or basically any other mtb for lower.

[@JustinH72]

Forks are interesting, the lowers are magnesium so you can't just strip them then use a regular primer. I paint lowers all the time and just scuff the current finish then prime and go from there

[@nukacookie4755]

Deine Videos sind einfach spitze !

[@magitroll94]

Do you have any tips on removing the sticker from the frame without the color coming with it. I tried it before but then the color ripped of in some places. love your videos :)

[@ETOE]

Use a heat gun to remove them.

[@chrishayes121]

Hi Martin. Have you done a brushed aluminium piece with DIY spray cans. Would love to see that.

[@69sound81]

I'm about to strip my 18 year old hardtail to paint it. Pretty much like this one, but I'm going to leave it without any branding nor stickers. I'm going with a faded yust like this one but instead of candy yellow I'm going with piano black in the back. I'm still considering weather I want or not to make my branding logos and include them. Maybe some silver for those, so I would be going with a base silver colour, then the decals, then the colour fading, removing the decals and finally a heavy coat of clear coat. I'm rhinking like 3 to 5 layers to give the paint better protection from chipping.

[@linabrooks5812]

Hey Martin, organizing myself for my first DYI - can spraying my alloy frame. I am struggling to find Ammonium Hydroxide 29% solution ( i am uk based) does it matter if its 28%? i can find "Ammonia Solution 25-28%" will this do the job ?

[@ETOE]

You mean the country with tons of morons leaving the European Union? Do you still have toilet paper, or is it out? I suggest to use what you can find on this Island.

[@moreps9551]

I've watched several different videos and is there a consensus on lightly sanding 800 grit + after applying primer?

[@ETOE]

No

[@moreps9551]

@@ETOE No consensus or no, don't sand inbetween?

[@ETOE]

No consens. Just do it as you like it.

[@darrellfox4117]

One question I have is when spraying a clear primer how can you tell that your getting 100% coverage?

[@ETOE]

How can you tell that you have a 100 percent clean but when you try to clen it after big business 🤔

[@darrellfox4117]

@@ETOE true, just wondered if you had any wisdom from experience that would help. I believe that I haven't had any problems with it in the past so ill just keep doing what I do. Thanks. Your videos are informative and inspiring so please keep doing them and I hope you have recovered from your illness.

[@axellemmens1558]

Hi martin, love your videos! I have an aluminium baseball bat I would like to paint but I would like to keep the shiny metal. Can I use 1K clear coat as a primer and then sand it to paint on?

[@ETOE]

No

[@RTHines]

Idk how it would work but if you sand it with 400 grit then put a 2k primer on it it should work, the 2k is essentially an epoxy. 2k clear coat, not primer.

[@ETOE]

@@RTHines he wants it transparent not primer color.

[@RTHines]

@@ETOE yup I just realized I said primer instead of clear coat

[@ETOE]

@@RTHines the clear coat won´t stick on aluminum. It`s also no epoxy. You need a primer first.