⚡Biker Bar: Secure Your Ride, Ditch the Straps!

[@sikbaggers]

Big thanks to each one of you for checking out the video! 🙌 I hope you enjoyed Steve's laid-back walkthrough of the B&W Biker Bar installation. If you found it helpful or entertaining, don't forget to hit that like button and subscribe to the channel for more cool content. Your support means the world, and we've got plenty more in store for you! 🏍✨ Stay tuned and ride on! 🤘 #Grateful #LikeAndSubscribe #BikerCommunity

[@BrianGregor]

We have a Road Glide and a StreetGlide and we love these!!! Had ours for about 6 years now and switched them out to different trailers. Now using them in our toy hauler. So much easier than using straps.

[@sikbaggers]

Yes sir Brian....I love them! Thanks for checking it out!

[@fattireglide1668]

Been using them a long time. Had the 1st version. The bar broke on a hard hit in the road. B&W had a new bar at the hotel before we got there.

[@sikbaggers]

wow..great customer service!!

[@adruancruz955]

Have the biker bar. Trailered from San Antonio, Tx to Sturgis, South Dakota and it was awesome, worked perfectly! 👍

[@sikbaggers]

That's a long haul!! I've used it for going on 5 years and no issues. Thank you for checking it out!

[@arkmox]

As an Indiana guy, you're spot on with assessment of the roads and the biker bar ftw.

[@sikbaggers]

I have a trip coming up again that goes straight through there...cant wait lol

[@qthebikeahaulic]

Perfect timing. I am moving from Winnemucca Nevada to Mountain Home Arkansas in May. Just bought a enclosed trailer for the bike, 2022 Ultra Apex. Will be using the trailer for rallies, Sturgis for a month and as a home base when traveling. No more tent camping and can buy stuff to bring home.

[@sikbaggers]

The biker bar will serve you well! just not having straps to trip over, check every time you stop, or even broken straps...had that happen once..it sucked...Congrats on the new trailer too thats awesome!

[@cathyfields]

Hey Steve , Great video on these we have been using them for a few years now and they are the only way to go . I think it is just so much more secure than using the straps after we got over the not have straps on the bike and the fear of the bike falling over we dont even worry about it anymore. So thanks again and stay safe out there

[@sikbaggers]

Hey...I think we all go through that with the straps...I couldnt take my eye off the bike for the first 5 hours lol my buddy was the same..5 years though and no issues at all. Love it!

[@Maddog98452]

I recently installed 2 Biker Bars in my 7x14 trailer, one for a touring bike and one for a Softail. Recently went on a trip with both bikes from Virginia to Austin, Texas... 3,000 miles round trip and neither bike moved AT ALL!!! Also want to note that the day before I was on my way way to a truck scale to check the weights and load for hitch weight and was involved in an accident. Driver in a Cadillac Escalade turned directly in front of me and I planted my truck right into his door. The Biker Bar is the real deal! Neither bike moved.... I can't say that would be the case with straps and chocks. Put it in and don't sweat it... If it's installed, adjusted, and set correctly there shouldn't be any problems.

[@sikbaggers]

thank you for sharing your story Maddog! That's pretty amazing...I've been a firm believer in this thing for years an while I haven't had any accidents we have had to slam on the brakes pretty hard a few times...and I was worried..but it has never failed me.

[@TheXlbuilder]

A friend and I ordered one each of them in January and am hoping to get them installed this weekend. Good timing on the video for me. I was wondering how it could really hold the bikes securely with just one bar, then I looked at it in my own hands. This thing is sturdy. I know I will be checking each stop on the first trip, but I am pretty confident there will be no issues. I welded up multiple extra 28" plates to be able to place them in four positions in the big trailer and one on each of the smaller trailers. I have the B&W turnover gooseneck ball in the truck and it has never needed anything in 12 years of towing a 40 ft enclosed. Good company to buy from. Thanks for the good video.

[@sikbaggers]

Hey glad to help and thats a good idea on the plates! everyone that uses it checks the bikes the first time..I did it to lol but it'll make a believer out of you the first time you use it.

[@tuaesam]

Great product. Had them since they first came out. Phenomenal customer service.

[@sikbaggers]

Yes they have some of the best and the bar has never failed me in 5 years. Love it!

[@scotttope5298]

Trailered 2 bikes from NY to TN and back with these no issues at all well worth the $$

[@sikbaggers]

Thank you for checking it out Scott...and I agree...5 years , lots of miles and zero issues.

[@donnieturner5073]

I absolutely love my biker bar. I took the trip to Galveston this past year for the Lonestar rally had no issues at all.

[@sikbaggers]

Yes ill neer travel again without it...5 years on this one and many miles and no issues

[@scottschiller1153]

Great information, 😊 Steve!

[@sikbaggers]

Thank you Scott!

[@davidhelton9007]

Great video. I didn’t know about these. Glad you had this on. I’m absolutely going to need these for travel !

[@sikbaggers]

yes sir...best thing ever bro!

[@kendodge1009]

Used this to trailer my RG Ultra from Houston to NC. No issues and bike road great with this product.

[@sikbaggers]

Hey Ken...yeah ill never go back to straps...no way...these things are so easy and super secure. Thank you for checking out the video!

[@douglasmaier3066]

I came across a guy that did a video on this a couple years ago and for the life of me could never find it again or think of what the hell it was called! The Google machine couldn't even read my mind on this one lol. Just ordered a new trailer that's supposed to be done the end of March and this is exactly what I want to put in it, so this was great timing Steve! Thanks for another great informative video! 👊

[@sikbaggers]

congrats on your new trailer Douglas! thats awesome. I just got this one too and needed to get installed. I've had it 5 years and never had a chance to really do a good video on it til now. Getting ready for Daytona so it worked out perfect. Glad to help bro and thank you for checking it out and the comment!

[@GRW.]

I have had great luck with my biker bar. Moved 1700 + miles (some rough roads) worked great. 😎👍

[@sikbaggers]

Absolutely! Never failed me in 5 years, love it!

[@renegadegreg6428]

I’ve been using these before B&D purchased the company! Absolutely perfect.

[@sikbaggers]

Oh nice! yes I love them!

[@mellsterr6192]

I’ve used the Biker Bars since 2014! Have 6 in my trailer for toting our rides to Sturgis. I know, time is of the essence. Have hard tailed it to Sturgis 21 rides. Now go in style using my truck and trailer!

[@sikbaggers]

yeah a lot of miles put down riding to these events/ rallys and I'll be honest..the air conditioned truck is pretty nice lol thank you for checking out the video!

[@edwardsmith7409]

I have two of those and I swear by em. Best damn tie down there is. We have parrots so I have to trailer the bike when we go on vacation.

[@sikbaggers]

Absolutely! Been using them for years now and they never fail me! Thanks for checking it out Edward!

[@shannon1991]

Nice ! Hope to see you at Ohio Bike Week.

[@sikbaggers]

Been there a few times a few years ago...the story I told about the roads in indiana was on the way to ohio bike week lol

[@brians1524]

Good video. Been thinking about these for some time. Using condor chalk and straps for years. Works good but this seems much better. Thanks for sharing

[@sikbaggers]

I was the same way Brian...condor and straps for years. Always had straps come loose, had a strap break once, the condor was great but then I got a wrap front fender and the condor was no longer usable as it hit the fender when it flipped up so I finally pulled the trigger on this and never looked back. 5 years and no issues, lock it in and walk away.

[@road_glide1945]

Great video. I have been looking into getting one. I'm definitely sold. I've been waiting for you to do an install video on the biker bar

[@sikbaggers]

Ive had that for 5 years and it seems like everytime I have to install I never have time for a video...I knew this time I was doing it...man it was cold that day but we knocked it out! lol Thank you for checking it...100% has never failed me in 5 years!

[@stevemears7134]

What an amazing idea! Not sure if it’s available in the Uk, but a great solution for when I get my trailer. Great vid, as always 💪🏻🇬🇧

[@sikbaggers]

Hey Steve ..this thing is awesome...using it for years and I dont know about shipping over there but I did find a website called Ubuy...is this common shopping website for the UK? It appears they offer them www.u-buy.co.uk/brand/b-w-trailer-hitches

[@stevemears7134]

@@sikbaggers hey, thanks for getting back. I’m looking at trailers right now but straps always worried me, and that was with a much lighter Ducati!! I’ll check this site out, thanks again and ride safe 👍🏻

[@elmaestro6106]

I can’t believe I didn’t know about that before. I’m going to have to buy one of them.

[@sikbaggers]

Best damn thing since sliced bread .....never failed me in 5 years

[@gnburkett]

Love mine. Installed it in our toyhauler so we could take the bagger on vacation with us. Wouldn't want to haul it any other way.

[@sikbaggers]

Me either! Thank you for checking it out!

[@Richard5873]

Great video like always. Love the hat !!! I have lots of there apparel/gear.

[@sikbaggers]

Yeah...Troll Co is a little pricey but im the same have several hats and shirts from them. thank you for checking out the video!

[@bobbybrock1520]

I made sure to hit the thumbs up for you Steve

[@sikbaggers]

Thank you very much Bobby! Its very much appreciated sir it helps more than you know!

[@helodriver20]

Beautiful bike too.

[@sikbaggers]

Thank you, much appreciated!

[@AngelTorres-se9zf]

I have a toyhauler and I am getting tired of the straps. I'll be in Daytona and hoping to find the biker bar at a discounted price there. Hope to see you there as well, have a safe trip😎

[@sikbaggers]

My buddy that was in this video that helped me has a toy hauler and we both use them and have traveled many miles with them ...bikes side by side, and never an issue. can you do me a favor....If you see them there can you let them know you saw the video? ...I dont think they have any idea we even made the video lol Thank you for checking it out too! Much appreciated

[@patsamples6452]

Great information great video, btw, nice trailer

[@sikbaggers]

Thank you! And yes this trailer is awesome...thank you for checking it out!

[@kennethdocken4802]

Unrelated question, you get your tank emblem off Amazon or a custom shop?

[@sikbaggers]

I get them from Joel at JH Choppers. Hit him up on facebook facebook.com/jhchoppersllc and tell him I sent you if you have a custom set you want or check them out on his website here jhchoppers.com/product-category/hd-tank-emblems/ CNC Cut, thick, clean, and pre-bent for the tank. Not amazon/fleabay cheapos

[@kennethdocken4802]

@@sikbaggers thank you sir. Hopefully I see you in my back yard at Daytona. Thank you for the videos. Just to thank of the particle board garage you started with. To now an awesome thing you got going!! The American dream can still be achieved in FJB world.

[@sikbaggers]

@@kennethdocken4802 yes sir Ill be there the first weekend and probably through tuesday, weather permitting. And yes...I look back at those videos working in a shop with 2 light bulbs, no heat or air, surrounded by ladders, lawn mowers, kayaks and tons of other stuff lol Its been along journey but im grateful for the way its went and the people Ive met along the way.

[@FABAutomotiveDetailing]

I live in Indiana and I can attest that our roads are the worst in the nation and possibly world. Like you said the bridge transitions are awful and always have been. Riding a bike across the bridges is terrible. Man I have been looking at this bar for a while now and you may have just made up my mind. Bike sure looks clean and shiny!

[@sikbaggers]

haha, I thought my kidneys were in my ears when I got through there. That biker bar is the real deal man.... I love it and would never own another wheel chock and straps. Yeah, she shined up pretty good..I have a video coming out soon on that...stay tuned! 😜

[@jessejames3944]

Really liked the video. Seems like a great product.

[@sikbaggers]

The biker bar has been awesome! thank you for checking it out!

[@OZARKSHDRIDERS]

Pretty sweet 👊🏽😎

[@sikbaggers]

Thank you for checking it out bro! Much appreciated.

[@CraigAquilina-fw3nn]

cool see you there

[@sikbaggers]

Yes sir!

[@Streetglide2021CRUISEN]

Awesome 😎

[@sikbaggers]

Thank you for checking it out!

[@donaldduncan4755]

I have owned these for 8 years and I live in NC and go to Daytona every year and have never had a moments trouble the best investment that i have made great product

[@sikbaggers]

Yes sir...another success story! Thank you Donald!

[@sidneysnottley6414]

Great idea👍 - but bloody expensive over here in Oz.😕 Amazon (Aust) charge $1893 (free delivery) - equates to $1296 US😱

[@sikbaggers]

Oh damn.....less than 400 usd...that really sucks Did you try B&W Trailer, the maker has them on their website

[@garybrasher7922]

Just wondering how it would work on an open trailer with wood plank flooring? Thanks great Video…..

[@sikbaggers]

Ive seen people install it open trailer for sure...if its wood plank I would really try to grab a frame rail though or add one right where you are planning on mounting it.

[@ryanr4181]

Steve says not snow ball chance in hell am I crawling under this trailer with me new Dixon flannel on get your ass under the trailer 😂😂😂. Great video Steve that’s my next big purchase then I can really start traveling with my bike I can’t just ride everywhere anymore I just can’t.

[@sikbaggers]

aaahhahhha LOL ahhahah hey now I crawled under there before we shot and checked everything out..JR didnt want to be on camera so he jumped right under there...I kinda pushed him at the end though to give us his story lol thanks for checking it out and I feel ya man...by the time I ride somewhere im wore out and dont want to ride anymore plus the truck has AC and comfy seats lol

[@daleclarkjr]

Another great video 🫡🤙🏽

[@sikbaggers]

Thank you dale! Much appreciated!

[@geraldgoodiii6993]

We gotta trailer down to bike week .. Can’t assume it’s gonna be above 30 And not snowing in IL at the beginning of March. Why can’t it be April so we can ride !? Dammit I don’t do well in cars on long trips.

[@sikbaggers]

thats where were trailering from...I guess im getting older and just enjoy the quite, climate controlled, soft seats of my truck for those long hauls..im fresh when we get there and can ride for days not being wore out from the trip down.

[@kennethdocken4802]

Are you going to have a booth at Teddy’s Harley at bike week?

[@sikbaggers]

We will be at the international speedway this year. Look for the Advanblack booth

[@steventwiddy3402]

Well Steve since you just have 1 bike in there you might as well stop here in eastern NC and pick me up and I’ll ride down to Daytona with you ! Lol

[@sikbaggers]

Haha man I would if I could! Were staying at daytona for a few days and then dipping out to my wifes parents for the rest of the trip....we need a vacation and rally for us is more work than relaxing.,...I hope to see you sometime at one of these though!

[@steventwiddy3402]

@@sikbaggers after you go to so many of them they all start to be the same….i wish you weren’t so far I think you would love the smokeout in Salisbury in September, it’s an old fashioned style biker party not a bunch of guys on big wheel baggers playing rap music so damn loud they can hear it 2 counties over

[@ricardoj5240]

I've been using mine for 3 years now, but it's always a struggle to unlock it. Do you have any tips or suggestions?

[@sikbaggers]

not really its tough to get out specially with larger floorboard's but I like it that way...re assures me that it isn't coming out going down the road.

[@richardyesner45]

Any idea what kind of clearance you need between frame and ground? I have air ride and all the way down i have about 3.5 inches between frame and ground

[@sikbaggers]

my bikes have air ride also...you dont want to haul it with no air in the system...adjust like I did in the video going into the biker bar, lock it in and give a slight bump up if you want at the end to add more pressure on the system...that's how I've done it for years now

[@charlestillman8114]

Great video!! Can the bar be used on full-air suspension bikes?

[@sikbaggers]

Yes...the bike in this video is full air ride, front and rear ...as stated towards he end never park your bike on the center and on this and always lave some air in your shocks...get the bike level with the base plate nd drive it in...lock it in and walk away from it.

[@bradburt8362]

I don't want to drill the floor of my toy hauler and I currently have a piece of 3/4" press board fit to the bottom of my garage with my Condor wheel chock mounted on it. Would that same method work with the biker bar so I would not need to drill through my floor?floor?

[@sikbaggers]

I dont know that that scenerio would be the same...the biker bar relies on the floor to sandwich those two pieces together and gives it its strength. I don't think I would rely just on the one board to hold my bike...I know for sure BW would tell you absolutely not.

[@u.s.aarchangelforgod3679]

TY Steve

[@sikbaggers]

Thank you bro for checking it out! Be safe!

[@u.s.aarchangelforgod3679]

@@sikbaggers TY you as well, ride safe

[@OverlandUSAHD]

The company will not cover sudden stops. I watched a video when two bikes popped loose from the biker bar during a sudden stop. Bikes damaged. Apparently the weight off the bike during a sudden stop can force it out of the bar

[@sikbaggers]

Been on the brakes pretty damn hard over the years and never had a bike slide or come off...seriously had some very close calls with all wheels and tires locked up...no issues.

[@1962egl]

Best system available

[@sikbaggers]

100%!!! Never failed me in 5 years! Thank you for checking it out

[@1962egl]

@@sikbaggers I have my baggers hand grips like 3/4” from the walls of my cargo trailer and they don’t even come close to hitting anything with this system. Absolutely fantastic. I just find you have to dial in the preload on the clamp just right or the bars can rotate a little. Once you get it right they don’t budge.

[@Pwpapa.7]

Thank you so much for this information i have been looking into the biker bar appreciate it 😎🙏🫶🥃🥃

[@sikbaggers]

Youre very welcome! Glad to help!

[@SIERRA-dx9wm]

Might try one in bed of our Silverado. Don’t like trailers 2WD 1500 with 2” drop in rear, use ramp drive FXSTC in Shiny side up 👍

[@sikbaggers]

Make sure to hit something underneath in the truck bed that will sandwich the plates and not just the bed. Bed metal is usually pretty thin.

[@SIERRA-dx9wm]

That’s a gimme sir 👍 Ride safe

[@SIERRA-dx9wm]

That’s a gimme sir 👍 Ride safe

[@chasingghost4499]

Cool video!!

[@sikbaggers]

Thank very much for checking it out!

[@kerrymcclure7503]

I am from Indiana and I have always wondered why they didn't build a ramp from the road up to the bridge floor. I think the construction company come from Illinois.😂😂😆😆😉😉 Be careful, ride safe.

[@sikbaggers]

hahaha man ill admit our Illinois roads suck too but man those bridges in Indiana were insane ... asshole pucker every time I seen one coming ahaha

[@Breakout2018]

I would be scared shitless !! lol.. But I trust your opinion sir…

[@sikbaggers]

lol its natural...everyone usually is, including me, the first time. Ive hauled this bike from Illinois to ohio 2 times, strugis 2 times, daytona 3 times etc etc...it has a lot of miles on it and not one single issue. I have several friends that use at as well....never heard a single complaint about it. just to be clear in not sponsored by b&w ...I've had this thing for about 5 years and just wanted to do a video on it. They did reach out after I posted it and thanked me and sent some t shirts which was cool of them. But ill never travel again without it.

[@topherkilleen2437]

I get how the system works. But my question is does the wheel turn or anything. Or does it just stay straight??

[@sikbaggers]

Thje wheel stays straight...ive hit some big ass pot holes and the wheel have never moved. It literally is "lock it down and forget it" Its not going any where. Youre trailer floor will come apart before that biker bar does.

[@topherkilleen2437]

Thank you I’m definitely going to get one. I was always wondering what the wheel did in transport

[@g.t.2366]

Is a wheel chock still necessary to lock in the front wheel or do you just lock the steering?

[@sikbaggers]

Absolutaly not...all you need is the biker bar. Nothing else. The handle bars will not move in the straight position once its locked on. DO NOT turn your handlebars and lock them while it is in the biker bar.

[@g.t.2366]

Thanks so much for the reply. Good to know.

[@houndsmanone4563]

Nice system. Never hearf of them. 👍🏽🤠 02/17/24

[@sikbaggers]

Absolutely...these things are amazing! Solid as rock, lock it in and forget it! Thanks for checking it out!

[@karlanderson1791]

As a trucker from West Central Illinois I can verify that on my regular runs to Long Island NY the Indians part of the trip is the worst.

[@sikbaggers]

hahha! ...those roads killed me...we went to Northern Ohio 2 times in 3 months...I dont know how you guys and gals do it...felt like my kidneys were going to burst after one trip through there.

[@denvermonkey]

Question....what front fender is on your road glide?

[@sikbaggers]

Its the Native Custom Baggers Fat front wheel and its their Half Breed fender ..here is my video on the install. kzbin.info/www/bejne/p4XUoWmko8qkarMsi=r4WO1ktWvG0pMPAB

[@jerrybrown66]

I have two of these for sale, both barely used (Indianapolis area). I love them, but they don't work with my drop-tail style trailer.

[@sikbaggers]

Hey jerry, is the mounting area in the bend part of the trailer? how come you cant use it? That really sucks man

[@jerrybrown66]

@@sikbaggers The mounting spot is on the non-drop part. The trailer hinges in the middle, and the bike can't be ridden into the Biker Bar with the rear wheel lower than the front. Because then when you raise the drop tail, the suspension won't compress that much. It binds everything up. I was sure I could make it work and have a unique setup, but it beat me. Plus, the floor of the trailer is diamond plate. Biker Bar requires 3" of wood I believe, to be mounted on.

[@rabonthurmond939]

Will the bikerbar work with a 30" wheel set up

[@sikbaggers]

yes....youre 30" requires you rake the bike which would put your frame back to normal instead of cranked up in the front...im assuming you have air ride as well...use it to adjust and go into the frame of the biker bar.

[@CraigAquilina-fw3nn]

where are you going to be set up at in daytona I would like to come by and say hello

[@sikbaggers]

Look for the Advanblack booth at the Motor Speedway. We have always been set up at HD but this year were doing the speedway so im not exactly sure where it will be at the raceway yet. We wont be too hard to find.

[@andymedinasr.9224]

Dude I'm so skeptical about buying that thing it just I don't know it scares the F out of me and then the thing is I have two Condors up front 300.00 for each, I might as well just stick with what I have but them things look cool as hell.

[@sikbaggers]

yeah, the condors are the way to go if you use a chock...and if you have them, sell them and recoop your money if you want to change to these. Dont be skeptical..I dont work for, nor was I sponsored by B&W. This is my real 5 year review and 4th trailer this one has been in. I will never use anything else. Read some comment son them...not a single bad one to read.

[@Ty_Advanblack]

I moved to CA cause the IN roads were so bad… 😂

[@sikbaggers]

LOL I believe you!

[@andrewlufi7659]

Do you still use a wheel chalk?

[@sikbaggers]

You do not use a wheel chock...never had the handlebars move once it locked in

[@deanlewis1650]

Hey Steve jus ride the damn bike lol jk no really this looks like a great product. I may invest in a couple for us . Thanks again ✊

[@sikbaggers]

haha man they are so easy! Easy to install, easy to attach and super solid. Been using mine for 5 to 6 years now. Its been in 3 different trailers if im being honest...depends on who we go with...but I always have it!

[@jamesbower6408]

Does it matter if the wheel falls to one side(the forks turn) enroute?

[@sikbaggers]

Never seen it happen. It locks the bike down, You want to feel it pull the bike down slightly when you lock it in. You can see when the bar goes in on the close up, it kind of sucks it down. never had one turn on me...you can always throw on a strap on each side if you want...most trailers have some basic hooks in them already..but just never had one turn on me.

[@rondemary8403]

Do you or can you use it with a front wheel chock with the bar??

[@sikbaggers]

it would have to be exactly lined up...There is no need of it though

[@mn0073]

Will this work with an HD Trike?

[@sikbaggers]

Biker Bar model MC2301 is compatible with Harley-Davidson Tri-Glide and Free Glide up to model year 2014. In 2015 HD changed the location of their emergency brake which interferes with installation of the Biker Bar.

[@manfrednietsch7349]

Thanks for the quick reply Mine is a 24 so I guess I'll continue with the straps

[@michaelblew6019]

Indiana roads are crap,I think engineers have left the room here😅😅😅

[@sikbaggers]

Yeah they definitely gave that job to the lowest bidder. 😂

[@tallglider6313]

the only way to go...use all your old straps for hanging out the laundry!

[@sikbaggers]

hahaha aaaahhahha thats great man! Thanks for checking out the video!

[@greggee8442]

Try driving a semi across Indiana!!

[@sikbaggers]

I will take a hard pass on that man...I avoid that damn state at all costs lol thanks for checking out the video Greg!

[@northbysoutheast5439]

😎👍👍

[@sikbaggers]

Thanks for checking it out!

[@denis9272]

🖐👌

[@sikbaggers]

thank you sir!

[@WAYNEGRANGER-s9y]

for $400.00 they could supply bolts...

[@sikbaggers]

they include the bolts to install it...if you want to screw in the base plates, which is optional, get some size10 wood screws ...they are cheap

[@roberth2414]

Wouldn’t fit with a legend air ride

[@sikbaggers]

Yeah that sucks..I use Dirty air and it works great

[@davidfellows6250]

biker bar is where i go to get a shot of jack and a sandwich on my way to where im going. 50 years of riding these great United States of America and ive never owned a trailer/ rv, ect.... of courses my bike ain't as pretty ,or clean as yours and i be willing to bet its got a shitload more miles on it.

[@sikbaggers]

haha yeah I guess there is two very different versions of biker bars.