#NZXT

Give this video a thumbs up! More thumbs helps me get more traffic through KZbin's rating system, which helps my PC Mod Shop, Mnpctech.com I created this video to share my steps in modifying the NZXT H440 Computer case front bezel panel to improve and maximum airflow.
Here are the Supplies & Tools Needed or Suggested:
DIY Supplies for NZXT H440 Front Panel grill mod
*Scotch 233+Green Masking Tape
*Mnpctech Modders Mesh Round Hole Sheet
*Red Scotchbrite Pad, Medium Grit
*Tack Cloth
*Filtered Respirator Mask
*SEM Self Etching Primer, Black
*RUSTOLEUM Painters Touch Gloss Black
*ScotchWeld DP-190 Transparent Epoxy
*Rubber Gloves
Safety Glasses or Goggles
Ruler or Measuring Square & Pencil
Rotary Tools with 1.5" Reinforced Cut-Off Wheel Attachment
Jigsaw with 18 TPI Bi-Metal Cutting Blade
Hand File

[@jdbarney]

Bill makes it look easy to remove that sound dampening material from the back of the bezel. I didn't have as much luck getting it to come up in one solid piece. After removing the bulk of the material, I soaked the residual adhesive with a bunch of Goo Gone. After letting it penetrate, it came off easily with a flat razor blade.

[@Mnpctech_Giveaway_PC_Mods]

thats a great tip, Thank you John! ......yeah, it was a grueling task that took waaaay too long

[@TalesOfWar]

Run an 8700K for a few hours inside it, that should melt it enough to peel off haha!

[@lorenzojabari6465]

you prolly dont care but if you are stoned like me atm you can stream all of the new movies on instaflixxer. I've been watching with my girlfriend for the last few days xD

[@coltenxavier7601]

@Lorenzo Jabari yup, have been watching on instaflixxer for since december myself :D

[@Unchainedmaple888]

tbh wish it came like this from the factory, or they should at least make a high airflow variant.

[@ThePhoenixdive]

Dude, mad respect. Your video actually has great quality content and even though I am not handy enough to even attempt this, it was super amazing to watch. Again, amazing job!

[@xChefGutz]

Perfect!!!! I just received a H710i case and was concerned about air flow. Was thinking about something like this. And this is perfect

[@leet9873]

Just found this from a fb group. Awesome tutorial man will definitely have to do this if i get one. (hopefully next weekend)

[@romukassa]

Really nice! Planning to do this for my old NZXT H2. It's currently sitting in my basement with even older Phenom II x4 system inside, but planning to build a Ryzen 9 next year.

[@aniqamsyarazwan5189]

Old but gold. Thanks for poppin in my recommendations.

[@Mnpctech_Giveaway_PC_Mods]

Classic

[@nicholaskiciak1788]

Thank you for sharing this innovatively helpful and well-explained modification. I have this case in an unopened box that sat in a storage unit and am currently designing a custom build Gaming PC.

[@octagontheshape]

I know this video is 3 years old but it taught me everything I needy to cut my corsair 100r and increase the cooling I was able to add two more fans and open the front adding the hexagon mesh. Thank you.

[@Mnpctech_Giveaway_PC_Mods]

Great to hear! Have a great day!

[@lord_scrubington]

great advice and fantastic product. I have been planning a mod like this for my build which is currently inside a white Matrexx 55, and this was a huge help for planning my mod.

[@Mnpctech_Giveaway_PC_Mods]

Sounds great! and thanks for watching today!

[@wake1077]

This is exactly what i needed! Thank you! I swapped all my components in a different pc a few years ago because it ran hot, even shutting down for protection on long weekend gaming sessions. My pc died a few weeks ago and im currently searching parts for a new one. Ofc i will go 3080, i7 12xxx etc which means i try to save money. Newer white cases are not my taste and i always loved the H440 optics. Time to dig it out of the basement!

[@Tami9]

H440 with undervolted12900k got 79C while gaming. With removed top and front panel it drops to max 66C. Thats fking big difference! I gonna mod my H440 soon.

[@ZIZUU]

Done this with my Sharkoon Ai7000 Glass :D Thx for the inspirational video.

[@alexadelaide]

This is a fantastic video. Great information from an obvious professional!

[@Mnpctech_Giveaway_PC_Mods]

Thanks for watching and commenting! Bill at www.mnpctech.com

[@luongkevin]

I can never get enough of your video Bill, PLEASE DO MORE PC MOD VIDEO, thank.

[@Mnpctech_Giveaway_PC_Mods]

Thank you, They're always fun to do when my time allows me.

[@rsrMean]

Great video, thanks! Just applied this to the be quiet! Dark Base Pro 900 (w/ different measurements). To everyone struggling with the sound dampening foam: a heatgun and a scraper can really save the day!

[@Mnpctech_Giveaway_PC_Mods]

Thanks for sharing!

[@mattyfinz]

I felt like I was watching "This Old House" or something, but for PC modding. I can really tell you know what you're talking about. Great stuff and enjoyed it very much!

[@Mnpctech_Giveaway_PC_Mods]

Thank you for feedback and watching Matty! Bill at www.mnpctech.com

[@octaviancr]

Can't wait till they are in stock!!

[@nakquada]

What a fantastic mod. I'm totally doing this to my H440!

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@nakquada]

Mines a white H440, oh man if those front panels were for sale pre-modded I'd grab one in an instant!

[@Mnpctech_Giveaway_PC_Mods]

check this link in 3 - 4 weeks for them to be stocked, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/ Reply ·

[@crazeedriver2005]

Wait, so you're actually going to sell the pre-modded panels?!

[@digitaldashproductions779]

Love this video and thanks for sharing. I'm getting the all black one today and plan on doing this. Have you got in contact with them about being able to order this yet? Also, I wanted an all glass smoked panel but you guys are all sold out on your website:(

[@Panchirito_Official]

Nice guide. What I like about this video, like you said you can apply it to any other case.

[@Mnpctech_Giveaway_PC_Mods]

Thank you! I make other cool stuff for your PC, visit my store, mnpctech.com and use my DISCOUNT code, MNFAN at check out for 10% off your order

[@_BangDroid_]

The Bob Ross of case modding. Not only was this very informative, it was relaxing too

[@nicmonberg5974]

Very nice work. What I would have done different is to have the mesh in the hole so it is flush with the front not just behind I expect you could do this easily its the same process with some bending of the mesh this is how a lot of the cases people buy have mesh put in the panels.

[@aarongrove2688]

Wow you did a solid job. It looks awesome

[@Mnpctech_Giveaway_PC_Mods]

Thank you Aaron, I sell the mesh used in the guide and make cool stuff for living here, www.mnpctech.com

[@Daplinksta]

Awesome work Bill.

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@Aj-fc7cz]

Nice vid Bill. Good info.......... Thanks, AJ

[@Mnpctech_Giveaway_PC_Mods]

Thanks AJ, any builds or projects in the works?

[@AE0MT]

Fantastic! Hello from St. Paul! I have a H440 as well, inspires me to start some mod ideas. Thanks!

[@Mnpctech_Giveaway_PC_Mods]

Hey Mike, How's it going in St Paul? Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@AE0MT]

I have a black case. I would be happy to bring it up some time if you want to "inspect"

[@knightx21]

Awes9me guide can't wait to try it myself

[@barryallen7230]

You my friend earned my subscribe happy to be here

[@udirt]

really nice guide, thank you!

[@willpixel]

Another great video Bill, thanks! I might have to give this one a go.

[@Mnpctech_Giveaway_PC_Mods]

Thanks Will, Do you have an online project log for your PC build?, I'll check it out.

[@willpixel]

Not quite yet just finished the project, upload coming soon.

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@willpixel]

That is awesome! I have both the Razer Edition, and the white version. I'd love to see you bring this to your store, I'm sure I'm not alone!

[@leonardojoy]

great work!

[@NickBaysingar]

You're the best, dude. I gotta do this to my H440 at some point. I already have the smoked acrylic window you guys make for it. That was a nice upgrade from the cheap plastic window the case came with.

[@MrScourgy]

Same here! The smoked window makes it look sooooo much better. Definitely doing this aswell at some point.

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@MrScourgy]

I personally have the black one but my wife has the white version, so both :)

[@NickBaysingar]

Wow I didn't see this reply until 3 months later! I personally own the white version of the H440. If you guys are seriously considering trying to get a supply of front panels from NZXT to sell modded, I would definitely buy one! Never mind, saw that you never got a response from NZXT. That's a shame. The mod seems simple enough, I'll probably do it when I have the spare time and money for the supplies.

[@PeterM0911]

Bill, you are the best!

[@Mnpctech_Giveaway_PC_Mods]

Thank you Peter! Do you have an H440 case, too?

[@killdozer812]

What an excellent video, thanks!

[@Mnpctech_Giveaway_PC_Mods]

Thanks for watching and commenting! Bill at www.mnpctech.com

[@BundymaniaReviews]

Nice and effective little mod

[@GeordiLaForgery]

Nice one👍👍👍

[@Wolfie254]

Thanks for the guide. I need to do that to my darkFlash DLM21. I bought the case before darkFlash came out with the mesh front version and they didn't respond to my emails for me to buy a mesh front panel.

[@JPOGame]

Gorgeous

[@Panchirito.gaming]

Very professional video.

[@Mnpctech_Giveaway_PC_Mods]

thanks for the comment! btw If you need anything from my store, use my personal code, MNFAN for 15% OFF, mnpctech.com

[@assasine75]

I'll be using a drill instead of a rotary tool to make the opening for the jigsaw. Excellent guide though! Can't wait to get it done on my H440.

[@Mnpctech_Giveaway_PC_Mods]

that works too, thanks for watching, Keep on Modding!

[@williamtehh]

Will probably mod the front panel of my s340 elite like this!

[@DeAtHvAnGeL]

You sould totally sell the front panel with this mod. I would buy one myself. Great video.

[@Mnpctech_Giveaway_PC_Mods]

NZXT never replied back to my inquiry.

[@misterchucker]

great work and nice result. could you notice measurable temperature improvement?

[@DennisVlaanderen]

This case just got a whole lot more attractive for me to buy now...

[@AliAbbas-se3sg]

Dennis Vlaanderen I love u

[@ApexierGS]

thx bill for the video

[@dstnjtimkhhundybhy4954]

You are the MAN... 1 more souscriber. Thank you

[@MiddleofKnowhere]

do one for the Phanteks Enthoo evolve! :) Great video Bill!

[@VikashKumar-pw6jt]

Middle of Knowhere

[@adamhahler4205]

Loved the video! Any tips for an alternative adhesive to use? I really don’t want to spend that much on a specialty adhesive and gun that will only get used this one time.

[@Mnpctech_Giveaway_PC_Mods]

check out GOOP brand adhesives.. Thanks for watching - www.mnpctech.com

[@orlandofrancisco2841]

Ola boa noite , ficou muito lindo esse computador

[@jzzavala98]

Definitely doing this to my p400 thanks!

[@Emdrag13]

You ever do it? I'm about to do it I already have all the tools and primer just need to find a filter to put behind that grill

[@PARAN0IDxGERBIL]

Emdrag13 I realize it’s been a year and as such is probably too late but what I did was order two p400s filters from phanteks and I use those on the outside of the holes. If you email phanteks they’ll let you place an order for just the filters

[@bw8992]

You do have a good channel thank you for the watch

[@Mnpctech_Giveaway_PC_Mods]

Thank you Bruce, btw Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@bw8992]

Sorry no, I am already into a build of mine. Right now I am upgrade my entertainment pc with and AM4 matx board in an Rose Dual-fan Mats mini tower case FBM-01. Yeah in know I went cheap but it works.

[@TalesOfWar]

Fantastic job, it looks like it came from the factory like this! Given I lack all the tools for this it'd be cheaper for me to just buy a whole new case which is annoying. My temps aren't terrible but they're higher than I'm used to, but then thats partly down to newer Intel chips running stupid hot. It's like we've gone back to the P4 days. Interestingly enough the reason they ran hot was because they were also rushed to market, thanks to AMD being competitive! It's amazing how history repeats itself! It would be nice if they offered different front and top panels like they do side panels. A missed opportunity there methinks.

[@Mnpctech_Giveaway_PC_Mods]

Very good points, thanks for commenting! Thank you, Bill at www.mnpctech.com

[@control_the_pet_population]

I wouldn't necessarily call it a missed opportunity. The case was designed around noise reduction, not temperature reduction. Essentially any case that advertises interior foam sound insulation is telling you that they wrapped your PC components in a nice toasty blanket. Removing the foam and cutting holes in it will improve temps, but it defeats the original design intent. At that point, you should have just bought a different case from the get-go. All that said, I think NZXT made a common sense and very simple workaround... When you wish for airflow over noise insulation, you just pop-off the front panel. That's what I do with my H440 and it's the best of both worlds. Thermals aren't outstanding compared to more mesh covered cases that don't have foam insulation... but my GPU temps drop by 5-7c under gaming load and motherboard components stay within very respectable ranges. The front to back airflow is solid with the panel removed. When I'm done gaming and want the silence, pop the panel back into place. I don't see a reason to permanently sacrifice a good chunk of the sound deadening properties when the only time temps become a concern is under heavy load.

[@Larongytis9999]

Argh, Bill, where were you when I actually had an H440 and wondering how to get more cool air into my build? This guide is so good. I'm gonna try and use it on my next build that's using an S340. I was curious if there's any way possible to fit an EK XE 120mm rad into an S340 at all? Thanks in advance and keep up the great videos! Your voice is weirdly soothing when you explain the process behind your techniques hahaha

[@Mnpctech_Giveaway_PC_Mods]

Yes, you can mount single 120mm radiator on the ceiling or front of the S340. Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@Larongytis9999]

I had a black and red H440 a few years back, I gave it to my friend when he got his first AIO. Also, I don't mean to sound snobby, but I was aware of the mounting areas, I was curious as if they'll still be good spots to out the EK XE 120mm because of the rad's thickness. It's their thickest rad out I believe, even thicker than their XTX lineup

[@AntoineFinch]

Now I can Fix my nzxt s340, THANKS

[@bw8992]

I do would like to do what you do hopefully in time and thanks again

[@Nezodam]

I'm doing this to my H400. I noticed a lot of noise coming out of the side vents and it makes more sense to have an airflow grill from the front

[@Mnpctech_Giveaway_PC_Mods]

that's great, thanks for watching!

[@zwinglexciii5399]

Ill do this wid my tecware nexus M. Thank you boss. 💪😁

[@SigitKariagilBn]

wow, nice! would you share the result? :D

[@tuna_land]

I might try this on my in win 301

[@zzeronerzz]

Niiiiice and clean

[@Mnpctech_Giveaway_PC_Mods]

Thanks for watching Bill at mnpctech.com

[@Naaackers]

Hey there Bill, Awesome mod. I have two s340 elite cases I'd like to do this mod on. However, I have one hesitation. I'm not confident I can make the cuts on the front of the case and keep it clean. Is there anything you can suggest doing to the boarders of the sheet metal for a clean look after cutting? Or would you recommend just trying to re-paint the entire face of it again after making the cuts. Thanks for your time and this video.

[@Mnpctech_Giveaway_PC_Mods]

You can use a hand file to clean up and straighten the cut edges. Use masking tape as guide for your the filing.

[@mbd8531]

I would like to do this to my Phanteks P300. I just need to get the hex grill and the green tape.

[@Mnpctech_Giveaway_PC_Mods]

Have fun with your mod, Thanks for watching! Bill - www.mnpctech.com

[@jdbarney]

Contemplating applying a "u-channel" edge molding to the opening in the front bezel, but the type you sell on your site would not handle the roughly 4.2mm thickness of the combined metal / plastic on the H440 front bezel. Any thoughts on a source for a similar product that could be applied to the thicker material? Most of what I see online (Amazon) is for automotive.

[@telemaq76]

i m watching this in 2019 and i would love to buy one white :p, i ve seen your website but it s out of stock, i understand it s an old case now

[@PARAN0IDxGERBIL]

I’m not big on the whole power tools thing but by god I’m going to figure it out and do something like this to my phanteks case. Thank you for the guide; it will be very helpful. Where did you get the sweet ass form fitted dust filter for your fans? Did that come with the case/fans?

[@Mnpctech_Giveaway_PC_Mods]

modders mesh grills from www.mnpctech.com

[@Armfan99]

I have H440 and it runs cool as a cucumber in regards to CPU (be quiet dark rock pro 3) but GPU is slightly warmer than other cases, maybe 5c. With ryzen 7 1700 at 3.9/1.36v it maxxes lower than 70c in any stress test i throw at it.

[@joshua41175]

Did this leave you enough room for fans outside the case so you could use a rad and all the HDD cages?

[@B4NTO]

That gap at the top of this NZXT H440 dont seem to exist on mine. I'm guessing this is the new release with the improved Fan Hub?

[@Carlisho]

Is the modders mesh magnetic? Wondering because im not sure if doing the mod this way from the inside or simply taking out the metal part of the fromt panel and making the entire front panel to be the modders mesh from the outside. I have a s340 Elite.

[@pilotguy1141]

Old video but I just built my first gaming PC just did this mod on my NZXT 510

[@Mnpctech_Giveaway_PC_Mods]

Awesome! if you need any PC case mod parts, you're invited to visit my store, mnpctech.com use my DISCOUNT code, MNFAN

[@jvmango3057]

I was planning to buy phanteks p400a but doing this seems more interesting

[@Mnpctech_Giveaway_PC_Mods]

Indeed, it's a lot of fun to case mod!

[@billbrown69]

I just picked up a second case today, so that I can finally take a crack at modding the front panel like this, but i'm terrified because i'm not usually good at stuff like this. Shame it looks like you never ended up selling pre modded front panels ;(

[@Mnpctech_Giveaway_PC_Mods]

NZXT wouldnt give me a good wholesale price, so I never stocked them in my store. Practice on a dirt cheap case first :-)

[@ohlmntt]

Really wish I could find a guide like this out there for the s340 or s340 elite

[@Mnpctech_Giveaway_PC_Mods]

apply the same technique as this guide, creating new guide would be redundant. you'll be fine.

[@Christian_1605]

i just cut a square hole in my sharkoon bw 9000.. always had a watercooler at the top so the heat dissipated instantly.., but now my build is almost 5 years old so i went for an air cooler and i instantly noticed that heat was building up in my system.. Never going for a solid frontpanel case again..😅

[@marcogarciadeleon5840]

Its amazing. Can you do an airflow mod to the nzxt h400i? Its the case i use.

[@Mnpctech_Giveaway_PC_Mods]

I don't have one, sorry. Thanks for watching and Have great day! Bill - www.mnpctech.com

[@Milhouz]

Bill quick question as I am looking at doing this to my case here in the next few days just ordered another bezel. For the sheet of modders mesh when I go to order it from your site did you use a 12" by 12" sheet or the 12"X24" ? Thanks!

[@Mnpctech_Giveaway_PC_Mods]

24" x 12" Thanks for watching! Bill at www.mnpctech.com

[@foxunitdelta75]

looks nice and easy but i don't have a jigsaw, could the entire cutout be done with a dremel?

[@Mnpctech_Giveaway_PC_Mods]

sure, would just take more time

[@CallMeP1ink]

3 years later.. can you do the deepcool macube 310 non p. I have one but I don't want to do this blind. So if u could make a video step by step it would be used well.

[@Mnpctech_Giveaway_PC_Mods]

wouldn't that be awesome!

[@TheRedneckCodecChannel]

Where would you get the filter at for that dimension? I didnt see a link for that

[@hayaa606]

haha the wolfenstien logo. OG as fuq.

[@Mnpctech_Giveaway_PC_Mods]

Thank you, Are you interested in the new Wolfenstein II game? Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@Armfan99]

Bill would meshing the top or front result in lower temps? I want to do this but would want to find a nice dust filter to go with it.

[@Mnpctech_Giveaway_PC_Mods]

Yes, meshing the front helps lower temps. The H440 already has a front dust filter. "Meshing the top" will depend on individual system configurations.

[@Armykarmy]

Started doing this for my H440 as well, thinking of doing the same thing up to. Just a pity that the modders mesh is changed to 12x12 inches now :/

[@Mnpctech_Giveaway_PC_Mods]

Contact us directly, we'll check our wokshop for you, mnpctech.com/contact-us.html

[@iamtecho]

Am I overthinking it? Want to do the same on my inwin 301, front panel. Here my issue it’s mostly a solid case, should try an remove the rivits to make the front panel a singal and Easter to work on or just cut it as one? Any other tips for cutting straight? Thanks and appreciate it.

[@Mnpctech_Giveaway_PC_Mods]

Yes, removing the panel would be easier. Practice on something else first, so you get feel for cutting straight.

[@Nezodam]

I tried this myself on an NZXT H400 but Gorilla Glue Epoxy came off like it was Elmer's Glue. The kind where that one kid everyone knew ate in elementary school along with the glitter? :D

[@Mnpctech_Giveaway_PC_Mods]

yeah, Gorilla Glue's greatest strength is it's Marketing...Use 3M scotchweld DP-190, it's the best

[@hNordiFy]

If I want glass instead, is it the exact same way ? btw great video

[@Mnpctech_Giveaway_PC_Mods]

I dont see why you could use same technique and supplies, thanks for watching

[@chungbung9976]

what are some other epoxy you can use that you can find in stores? Thinking about doing this mod to my H500

[@Mnpctech_Giveaway_PC_Mods]

yes, E6000 adhesive.

[@joshbrown4397]

Does this significantly increase noise levels? Quite like the quiet aspect of the case but don't want to sacrifice airflow haha. Also, any cheaper alternatives to epoxy?

[@Mnpctech_Giveaway_PC_Mods]

not that we noticed, but you can always get lower dBA fans... E6000 glue

[@propaks8241]

are there any other metal meshes youd recommend? the mnpctech one is sold out.

[@Mnpctech_Giveaway_PC_Mods]

restocking today here, www.mnpctech.com/products/round-modders-mesh

[@Mawa1979]

Would it be ok to use the U Channel rubber edging to give it a cleaner look? Would the epoxy be ok with it?

[@Mnpctech_Giveaway_PC_Mods]

Yes, the DP-190 epoxy works with rubber, too. Good luck with your modding venture!

[@Weech.]

Thanks for this! I recently installed an x62. It wouldn't fit up top due to clearance issues with my mobo VRM. Ended up having​ to front mount it. Opening the front panel makes my temps drop about 10c! with the the front panel on my GPU gets uncomfortably hot. I have 2 Noctua iPPC 2ks on the rad and it doesn't help much.

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@Weech.]

Bill Owen I have a black with blue trim H440. if you can somehow get a black/blue front panel. ill 100% buy it!

[@Mnpctech_Giveaway_PC_Mods]

Thank you for answering, but I can't afford to buy and stock every color combination. sorry. I will try and commit to all Black & White, if NZXT is willing to let me purchase inventory.

[@Weech.]

Bill Owen it's alright i fully understand. thanks for looking out for us who dont have the tools or dont feel confident doing something like this! I appreciate the tutorial video as well!

[@TinyTom1]

Would you consider modding my H440 front panel was shown in the video?

[@Mnpctech_Giveaway_PC_Mods]

No longer staffed for custom jobs, sorry.

[@Gotallofthem1]

Great Video question, do you think it is possible to do the same mode but instead of putting a mesh in the center to put a Acrylic Window? I have a case with fans in the front like this, but they are blocked by the solid Plastic case. If it is possible, any chance of you making a video on a how too? Thank you.

[@Mnpctech_Giveaway_PC_Mods]

Just apply the same steps as shown in this guide, Thanks again for watching!

[@Gotallofthem1]

Thanks will do.

[@spike229]

My new gpu is creating a ton of heat in my h440 and suffocating itself. Do you have a suggestion for adding a fan intake to the plastic window on the side of the case? I'm worried about cracking the window when cutting through the material.

[@Mnpctech_Giveaway_PC_Mods]

You can apply the technique for adding fan hole in this video guide, kzbin.info/www/bejne/baiqnYqQZ5mEqac Thanks for watching, btw I make other cool stuff for your PC in my workshop. visit my store, mnpctech.com and use my DISCOUNT code, MNFAN at check out for 10% off your order

[@stevebittner9163]

Bill take a look at the video you were saying 1 3/8" but you had the square set to 1 1/4" I believe unless it was the angle view of the camera. LOL

[@Mnpctech_Giveaway_PC_Mods]

Haha, I made correction in the KZbin Annotations.

[@SpecterMatthew]

been wanting to do something like this.

[@Mnpctech_Giveaway_PC_Mods]

Do you own a Black or White NZXT H440 case? I'm going to speak to NZXT about possibility of ordering H440 front panels and selling them with my grill mod here, mnpctech.com/nzxt-h440-s340-razer-replacement-custom-window-smoked-clear-red-uv-green-blue/

[@SpecterMatthew]

Bill Owen i own the white one and would probably mod both top and bottom panels. not so sure i would buy new panels when i already own them. did you need to add any white paint to the cut line?

[@SpecterMatthew]

So i'm kind of curious. You can buy a new case for roughly 120. I cant seem to find the mesh for sale anywhere. How much would you sell new panels for? Also: I use 2 140mm fans in my case and really wouldn't want the extra height on the modded cut out for 3 fans. Would you make them for that size fan config too?

[@Mnpctech_Giveaway_PC_Mods]

No custom orders, I would offer exactly what was done in the video as shop production run. I'm not staffed for one-off orders. Still waiting for NZXT to confirm they can supply me with bezels and pricing. Link to mesh, select 24" x 12" size, mnpctech.com/case-mods-gaming-pc-liquid-modding-custom-computer-mnpctech-overclock-cooling-fan-grills/modders-mesh-perforated-aluminum-steel-honeycomb-grill-intake-front-fan-slotted-diamond-round-hex/modders-mesh.html

[@Coxis67]

How do you make the cut so straigth? I have a jigsaw, but whenever I've tried to use it I can't get them as straigth as you. The blade itself bends a little.

[@Mnpctech_Giveaway_PC_Mods]

Use a new 18 TPI bimetal jigsaw blade. Run the Jigsaw metal guide along a Measuring Square you've tapped down with Masking tape.

[@robg9971]

You can make one the same for Nzxt manta White?

[@ionelmantea7793]

nice video, good job, a link with the bits and pieces you used would be nice, but the video is pretty much self explanatory

[@Mnpctech_Giveaway_PC_Mods]

link to what exactly?

[@lenabhop6147]

I'd like to try it on my h700

[@Mnpctech_Giveaway_PC_Mods]

Great idea!

[@XMattyMiseryX]

Haven't got the modders mesh yet, but my cuts are still kinda rough looking. Any suggestions on making them look cleaner? I've already cut mine, but I can't find u channel in stores and idk what else to do

[@Mnpctech_Giveaway_PC_Mods]

After cutting opening, Use a hand file with masking tape alone edge as guideline, as I illustrated in the video, and just file the edges until even with the tape. If you still want u-channel, you can use this wide rubber trim, but it will require gluing to the edges, mnpctech.com/case-mods-gaming-pc-liquid-modding-custom-computer-mnpctech-overclock-cooling-fan-grills/u-channel-pc-computer-window-rubber-trim-molding-cable-management/xbox-360-custom-window-molding-6ft.html

[@Cenzurat]

i really need to do this with my phanteks case, it was good enough but now i got a 2nd card in for work and..my pc sounds like its about to go into orbit, I'm thinking about using some plastic mesh held on by magnets, cause I don't live in the US and I have not seen any mesh anywhere, also have to paint my ram sticks white and clean the whole pc..okay now i already convinced myself its too much work for today.

[@Mnpctech_Giveaway_PC_Mods]

Use my discount code, MNFAN at checkout, www.mnpctech.com/products/round-modders-mesh

[@ROFT]

Maybe use a hairdryer to heat up the adhesive on that foam to make it peel off with ease.

[@Mnpctech_Giveaway_PC_Mods]

I did, thanks for watching! www.mnpctech.com