BIOS overview: Gigabyte X470 Ultra Gaming (should be very similar to Gaming 5)

[@ActuallyHardcoreOverclocking]

FURST Alza LN2 pot sale: www.alza.co.uk/cheap-kingpin-cooling/18862275.htm#f&cst=0&pg=1&pn=7&prod=9033&sc=361.1666564941406

[@MrRedcecil]

Nope ;-)

[@Harjeevan20]

Seventh!

[@blafasel5331]

Does that cTDP *actually* work on the regular CPUs and not just on the APUs where this is an advertised feature? If it does, than it would be massively helpful if you could do some testing at some settings like 65W, 80W, 95W and check what the boost analysis looks like for those settings (and also it the power consumption actually fits the setting). TechPowerUp started to produce immensely helpful boost analysis diagrams, where on page 16 of their Ryzen 2700 Non-X review you can see a terrible drop in boots frequencies with 5 or more active threads. If one culd buy a 2700X and tame that alittle bit, then the 2700X would be a lot more attractive for energy efficiency aware builders.

[@JWbrasser]

Does the HPET actually do anything or does it just cause issues (on my 1950x it just seems to break things and be annoying)????

[@SidawiKhaled]

First*

[@kent6732]

Thanks for the detailed walk through on the BIOS. I have the Gaming 5. MicroCenter knocked $50 off the board with the Ryzen2 processors when they launched and stock on boards was very limited at release. The Corsair DDR4 3000 CL15 from my Intel system would not run past 2666. Sold that kit with the Intel setup and put in a GSkill TridentZ 3200 CL16 kit (Hynix based). XMP works like a champ. Samsung b-die prices are nuts. All in all I've been extremely satisfied with it running my 2700x at stock. May not be a good choice for OCing but for stock use I've had no issues at all and would recommend. Temps are spot on and it's been perfectly stable for 3+ months.

[@karpie.2825]

SVM = Secure Virtual Machine, called also AMD-V extension (e.g. in CPU-Z). It is hardware acceleration for virtualization on Windows and Linux so you want it on if you are using Hyper-V, Docker, VirtualBox, KVM, etc. You can have it enabled all the time - I do not know if there is any drawback if the SVM is enabled but not used.

[@NotAMinifig]

small correction: docker doesn't belong in that list. but yeah, don't know any drawbacks either.

[@Raletia]

To add to this, the IOMMU is a thing that's useful for VMs, you can use IOMMU to share hardware directly with a VM, such as a video card, like in LinusTechTips's X Gamers 1 CPU videos. Level1Techs has some videos on IOMMU for AMD, though I think it's all 1st gen & threadripper. Also bios updates can change how well things do or don't work and some boards might be better than others.

[@juliusfriesen633]

If it’s enabled, you cannot use Amd Ryzen Tool in Windows

[@Ovane211]

Loved the overview style on this video. Definitely helps us get a deeper view of the BIOS settings and what to expect and helps us make better informed choices.

[@Luredreier]

07:15 The op-cache basically stores already decoded instructions in case you need to use them again. Keeping that thing enabled significantly increases the performance of loops and also improves the performance of SMT because Ryzen is bottlenecked to some degree by the decoder so being able to supplement the instructions decoded by the decoder by already decoded instructions in the op-cache allows it to occationally do more then 4 IPC for the core as a whole (a single thread never is held back by the decoders max limit of 4 but two threads might occationally be, this is one of the tricks AMD has up its sleeves vs Skylake to beat them in multi-threaded IPC as Coffee Lake, using Skylake arcitecture can only decode 4 instructions pr clock cycle and can't retire more then 4 either, while Ryzen, using Zen can retire 6 meaning that if the core is feed more then 4 IPC it still can deal with that) Anyway, dissabling this could *theoretically* help with extreme overclocking. But unless you have a code that don't benefit from that in any way you're probably going to experience a reduction in performance. If your code is latency sensitive (games and music for instance) then leave it on, if your code got any loops that's smaller then 16 B leave it on, if you're using both threads of the core, leave it on. You should only really dissable it if all you care about is frequency and you don't care about performance at all, or if some *major* security issue is discovered with the op-cache and keeping it on ends up just being unacceptable. 7:49 You might occationally improve performance even without overclocking when doing 4+0 in 8 threaded workloads or workloads with less then 8 threads in use provided that the threads communicate a lot with eachother. Obviously you also lose any performance advantage that having *more* then 4 cores might offer, so not *that* useful, still if all you're playing is things like World of Tanks or some such... That said, I'd just use thread affinity myself instead... The situations where that helps are about as rare as the situations where dissabling SMT helps is...

[@S3rial85]

I love the concept ;) I "have" to buy a x470 mainboard in the coming week so i will take every bit of info i can get.

[@joaocarlosferreira9393]

Erp is to cut the power to USB ports. Power loading is to have a minimum current pull as some PSUs shut down under low loads.

[@tombudd1281]

Great idea. It's good to know what knobs we'll have for setting up the system. I have no doubt you'll follow it up with an overclocking and stability video later.

[@desi_panzica6474]

Dude. This video is an awesome explanation. Even if it's still not as indepth as some may suggest but I like this. Helpful 👍

[@SouthSider2k5]

Just thought I'd say I appreciate this video alot.... Saved me from going and buying new ram when all I had to do was find those hidden ddr4 settings disable Gear down Mode and xmp profile worked like a charm.... 3200mhz ram.... Instead of 2133.... Thank you.

[@dhuzjznzznzjzjzjzjzjzj934]

Above 4g decoding = suport more that 4 graphic cards (whot its default in most mainboards) in some mainboards this option is name as "mining mode"

[@timde1538]

I know its almost 2 years ago, but it’s used for rBar (S.a.m)

[@kleebod]

Thanks for the video. It helped me get my EDC under control again. Now I know to keep Quiet & Cool set to ON

[@ZagZagSama]

My mind was blown! This Mobo works like a charm with CTR. I have a Bronze sample Ryzen R5 3600 clocked to 4200 fixed with 1256 mV. Furthermore a 3200 Kingston CJR memory clocked at 3600. This is R5 3600 XT speed according to Cinebench 20 (3815 points). Could not be happier with this 112$ Board. WITHOUT LLC!

[@Luredreier]

23:51 IOMMU is *very* usefull if you're doing viritual machines and want the VM to have direct access to any hardware connected to the motherboard. Doesn't have to be harddrives at all, for instance if you're running a Windows guest OS in a VM *inside* a Linux host OS and you want to game on it you'll need to pass through a GPU to Windows if you want good gaming performance inside the VM. And perhaps you want specific USB ports or SATA ports to be connected to the Windows VM instead of the Linux one, IOMMU is what makes it possible to do that kind of things. IOMMU isn't set up particularly well on Ryzen, but at least it's there in the first place unlike of the alternatives...

[@lexzbuddy]

that was excellent. thanks for taking the time to do this. greatly appreciated

[@JDJayDee]

liked the overview man, nice change of pace

[@MicroMac]

CEC 2019 makes system use less than 1W of power when off or in sleep mode. It also automatically enables ERP, which lowers power draw on its own also.

[@_BangDroid_]

European efficiency crap

[@not_a_samsquamsh6777]

BangDroid Technically it's Californian, but nonetheless. www.google.com/amp/s/www.digitaltrends.com/computing/cec-energy-efficiency-pc/amp/

[@uther10]

Epic overview and thank you for this! Great and detailed vid with explanation in terms anyone can understand.

[@floridaman9968]

Great, gives me a little bit more confidence in my boards bios. The DAC-UP is most useful with high end dacs that have their own power and you can disable power going through the USB to have a cleaner signal. Above 4g is for mining or compute gpus.

[@starsstripesjacket]

I really liked this video, keep up the good work!

[@Ironclad17]

They haven't changed much from the bios a decade ago on my x58 board. Fan control so much nicer than my z170 ASRock board.

[@Mysteoa]

it's 2am and I'm watching a Bios video and ignoring that tomorrow I may be the only person from my team available.

[@veritas6936]

Nice one m8 thx. like to see more on the pbo progress also when you get a min on the aorus g7 z370 bios walkthrough and your whole overclock with the delided 8086k but thx gr8 stuff. Really annoyed with the CH7 it seems overpriced and same old same old, all they did was turn up the voltage to make it work as gd as the aorus x470. I think the strix -f would be one of the best bets esp. if you yourself find that all you really need is a good vrm and the pbo override options, set it and forget it at lvl3 maybe a little bump to bclk. Now if that's the case for best performance then its been made really easy and as such we can focus on a gd vrm, gd feature set, then get to work on memory speed & latency, which takes time in itself. I'm wondering if that's your opinion here also, knowing the insane amount of options in bios esp. on asus boards it would be nice to cut through the crap and just get to the part that matters. Just checked the price of the x470 stix-f kinda expensive for what is so again asus tax here in the u.k. think i'll pass on asus all round again was the same with my z370 went aorus g7 asus boards just way too much, apex X £300 lol.

[@Sebastian-pk3wf]

I read that "High Precision Event Timer" must be "Disabled" for a better cpu performance. SMT Mode = Enabled for Hyper Threading. And is very important that "CPU Control Mode" be set = PWM for a better control (presicion) of fans. "Temperature Interval" = 2 is ok.

[@ganakas9586]

unless you are afraid of pissing off a roomate ... and you intend to overclock the idea that u need "precision fan curves" is kinda silly ...u set them to manual put them on 100 and move as much air past the hardware as possible at all times. Fan's are cheap just use them ...the amount of power they draw is horseshit as well vs the price of the hardware. I built my system on a budget in the summer of 2018 . Definately better stuff out there processor wise with Intel but for 140 bucks on the CPU and 240 on the GPU i can't complain. But again I play games So I have headphones and don't care about noise lvls as my gaming system isn't at work where im concerned about other people's reaction to the sound. Hard part with This motherboard and Ryzen in particular is memory OC. Good news is Yes u can now with new bios updates hit 3600+mhz speeds but you are better off going with a lower frequency with SUPER right timings ...not simply the base 5 everyone lists but ALL the subtimings ...tweak and tighten All of them and you will actually notice FPS gains in video games up to 8 frames in my experience . More importantly you can solve most stutter issues in intensive games like BF5 as the frametimes tend to improve . Ryzen 7 2700 (non x) OC to 4.275 ghz all cores 1.36 VCore 240mm Push/Pull Config AIO Avg temp with 5 hours Of gaming = 56C , Gskill 3200mhz cl16 OC to 3333mhz timings Tightened to CL14 Full tower case cuz ...don't be a bitch bruh u need those radiator slots n fan slots. Buy yer sister the "Mid tower" which translates into Bitchmade punk tower. Gift yer mom a mini ITX tower cuz she is yer mom n doesn't know that its stupid. Put a bow on that shit n never speak of sch nuttless things again cuz yer a man , not some console gamer who has to ask mom if there is extra room for a 2nd controller in the living room. Yer a god damn PC gamer , that means you have TWO Testicals and can use both of them in the decisions you make. Budget or not you go ballsout with yer frames out son. No 30fps locked pre lowered setting BULLshit like those scuffed ass console gamers have to endur and most of the itme are too dense to even realize it. Oh Gigabyte GTX 1660 TI Graphics card , 144 FPS on Bf5 High settings where it helps ( Lighting , Mesh , Texture Detail , AA ) * Yea i see u in that bush mfer , whats good?" Low settings for stupid shit like undergrowth and terrain. Looking forward to wanging out with a new AMD Graphics card when money allows. Till then I'll see yall in the trenches .... PS planes suck.

[@Zarcondeegrissom]

10kHz BCLK stepping for Software Defined Radios (or soft modems) is very 'cool' however I'm not sure that granularity is beneficial for most other uses (or ADC's with built in clock gens). Also, if you're within 10kHz of stability on your comp, it probably isn't daily usage stable with hotter day ambient temps. 4 sec Power button, is super legacy, lol. If you're running an OS that ignores the power button and lacks a 'shut down soft mode' (Like DOS v3.0), you can set that to turn off the comp if the power button is pressed for 4 sec. Great vid, Thanks for the what is in there vid, this works. B)

[@triuneentertainment4431]

sorry but the one thing I was looking for you to go over was dealing with the CSM support and the M.2 SSD, You skipped right over that section. Sad face.

[@LDWilliams]

I ended up Having to use the downcore control with the 3900x, otherwise win 10 just would Not install. I dropped it down to four (2+2) and win installed. Once win was installed I then installed the Gigabyte utilities and that updated the Intel WiFi driver that was causing all the problems. Once that was installed I could then drop back into the Bios and bring all cores back into action. Apparently this is an ongoing issue for many with the 3900x and I resume might be even worse for the 3950x

[@HeadBassVTEC]

I just upgraded to 2600x and Crosshair VII but still watched it hoping to learn something. I assembled it yesterday and all seems to work so installing waterblocks today and play with bios settings later. My 2600x boosts up to 4262mhz on stock cooler so hope with the ek monoblock it will go even little further or at least actually hold that clocks

[@ancalagon1919]

Great video bro! So, the dynamic vcore (DVID) is for undervolt?? I want to undervolt my ryzen but dont know how to do it =(

[@Dr-AK]

do you have a video for Precision boost overdrive use on 2700x and gigabyte board? Great video!

[@Napert]

me at the beginning of the video - oh the bios looks very similar to my ax370 gaming 3! me 3 or 4 minutes in - it... looks the same, yet... it is so much different

[@satachi95]

Thanks man, that helped a lot!!!

[@p1st0ls44]

i own the gigabyte gaming 5 and i can say im very underwelmed...

[@d1namis]

I took gigabyte board for 1st gen Ryzen cuz Asus failed with cheap board like b350 Prime and Stryx kinda suck with small heatsinks and small problems here and there. But x470 g-5 it's kinda crap. But any way, probably it's still better than what Asrock done, cuz my exp with SLI Killer was kinda A WAY OF A LIMITS.

[@pauromaguera]

i've got the b350 gaming 5 too, shit vrms, shit bios, etc..

[@josh1303]

I think some changes happened with latest bios. Under Precision Boost its just on or off. Can you do a update?

[@Soda88]

_if chipset core 1,05v want adjust above 1,19v, please synchronized adjust dram voltage_

[@randyespoda4396]

Seems like it's written by some Russian hacker. Doesn't exactly boast a lot of confidence.

[@DanielWW2]

No LLC?

[@LawfullSpook]

It does actually have the edc throttling settings. You where actually on the correct page but never accepted the liability to see the option. You click and CBS then custom pstates then accept you get a whole bunch of options open up to you then.

[@Seth22087]

Nope, this is perfect. Also I wish I knew I could set custom TDP before when I had bit of high temperature issue with my 2600X... Anyway, well done.

[@firaso3929]

What do u mean?

[@firaso3929]

What did u set it on?

[@scruff_01]

BCLK is something the x370 gaming 5 lacked but other than that pretty much same

[@Mr864077]

nice one. Please do for the rest mobo as well.

[@Monsicek]

Did they at least resolve these cold boot issues from 300 series motherboards? So far nobody mentioned this topic.

[@1967KID]

Nice job ,can you do top Asus motherboard.

[@ctnava_ucsc]

I'd appreciate it if you went into different ways to configure the motherboard and make the most use of different layouts.

[@capitaldd3693]

Hello, Are the bios updates specific to each cpu...? I need to go from a 2600x to 3900x...... Will the gigabyte x470 ultra gaming - latest update be what I need...? Thanks...hope ya can help

[@Michalos86]

Anyone else has problem with overclocking RAM on AORUS? I have a AORUS B450 PRO and after updating the BIOS the max OC on RAM is 3000 MHz. Out of the box I was able to push 3200 MHz Cl14. My RAM is HYPERX PREDATOR 2666 Cl13, but the same issue is present on AORUS X470 GAMING 5 WIFI with GSkill Ripjavs V 3200 cl 16. Previously they run on default X.M.P. (3200 cl 16) now max is 3000 MHz. New BIOS is f42c.

[@koivut2porttu637]

i have gaming 5 wifi do you think 1700x ryzen 7 is okay with that? thinking about overclocking to 3,9ghz with 1,35volts or 4ghz for 1,4volts could i get it stable?

[@skeetssaer2018]

I bought the Gaming 7 in April. I loved the board but the motherboard bricked with the famous 00 code. Needless to say I am running a As rock Master SLI X470 now. I have been burned too many times by Gigiabyte to ever recommend them again

[@1967KID]

skeets saer gigabit screw me in the 90s and I have never got a motherboard from them ,I try to get top Asus motherboards.

[@not_a_samsquamsh6777]

As a former X370 K7 owner, Gigabyte was the biggest supporter of me switching to the MSI X470 M7 AC. Twice two different BIOS revisions bricked my main BIOS just with basic multiplier, voltage, and XMP profile adjustments. New BIOS releases just feel like a public beta test rather than an official release. I bought the K7 in October of last year and ditched it not long after Zen+ launch. The entire time I used the board, RGB Fusion proved itself little more than unusable. There was one update during that time that fixed instant crashing of the software, though it would then crash after adjusting any lights. GG Never buying nor recommending another Gigabyte board in the near future at the least. As suprised as I am to say it, MSI has been on a completely different world for me on AM4. It's been nothing short of great in my experience.

[@boblister6174]

same as me late 90's early 2000's there quality was questionably getting worse so I stopped using them tried the X370 K7 for my ryzen build nice feature list for the price. But I hate there newer bios hiding everything removing useful voltage setting for stabilizing ram even a few bios revisions they had to pull completely off there ftp because they were at the point of frying chips with to much voltage caused by bugs with certain offset values(1.55V from certain negative offsets). I'm still currently running it sense I don't have a need to upgrade my chip with the zen+ gains but have not gone past F20 because of loss of performance from there bios's getting worse and removing features. Even then I'm still thinking of going back earlier for my ram to drop the Trfc back under 500 (hynix ram was a pain with first gen ryzen) as well as some other sub timings that will not drop lower in f20 then they would in F7a or F10.

[@not_a_samsquamsh6777]

Bob Lister I just stuck with F4 for most of the time I had the K7. Anything higher added about 10 amps for some inexplicable reason. It was enough to ramp the fans up on my R1 Universal, which was annoying in an otherwise quite silent system. Then F6's 1.7v bitch slap debacle put me off of f6. F10 and F20 were the BIOS revisions that bricked on me. Thank god for dual bios with physical switches; at the rate Gigabyte is going, they need it.

[@DiamondBlade]

but gigabyte have dual bios, whats wrong?

[@copyshop09]

Above 4G Decoding Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if the system supports 64 bit PCI decoding)

[@syros007]

I have the Gigabyte Aorus X470 Ultra Gaming and i can't change most of this options, why? For example you change the Dynamic VCORE, it looks exactly the same on my BIOS but i cannot change anything. I got the latest bios F3g.

[@SKYTRiXSHA]

you can with space.

[@Highlanders123]

Hi great video...I have b450m gaming motherboard..is the same settings? My cpu is ryzen 7 2700 eight core

[@hisgen01]

I want to buy a 2600x, put it on a motherboard and want to use PBO to oc it. Which board is suitable for this without breaking the bank to much? Do I need an X470 Asus or Gigabyte mobo, or will the MSI B450 gaming pro carbon wifi do the job as well?

[@gth77s]

2:52 M.2 HARD DRIVES?????!!!

[@BhaalTheFleischgolem]

Very helpful:)

[@ΝεκταριοςΣπατας]

on those gigabyte motherboard where is the secure boot .?

[@borealeone]

There's no PBO settings for 2700 on Gaming 7, so people should be wary of what they get. I did not know it, so i'm stuck with 'normal' OC (4100@1.43V)

[@veritas6936]

Would you not usually need an X chip for the PBO? don't know as i don't own one but i thought it required an X chip.

[@manum8170]

Ok really dump question. This looks to be ok bios, so does that mean that aorus gaming 7 wifi has it as well or better? Thinking of getting either that or 470 taichi....

[@why_ami_here1916]

Yes it has a lot more options

[@manum8170]

thx

[@ARCHILAKHAN]

How to add multiple monitor support on this bios? My GPU hdmi port works fine, but the onboard HDMI not working. please help . I want to connect two monitors using 2Hdmi cables (1 of GPU and. One on motherboard.)

[@nekiteki705]

nice explanation....hv the same one..just plugged into a monitor into its hdmi slot for dual monitor setup but its not turning on, do u know the settings for that in bios ? please help

[@johnodei618]

Can you please show me how to overclock the 1800x to 3.9ghz on all cores? Or show me some info on it? I have this motherboard

[@dharkbizkit]

still not sure how i get my 8700 none k to clock down in idle. windows settings are right, yet the cpu always stays at 4,29ghz. the only c state setting that i found for california regulations i believe just turns off to much, even the leds. my gigabyte z370 doesnt have gobal c state, its called different

[@Ghost-bq9fl]

I have a question : I hve the x470 Aorus ultra gaming mobo with Corsair Vengence Pro 3200mhrz ram what is the best voltage for this specific ram when ever i over clock it to 3200 it gives me the blue screne codes but when its stock 2133 it runs fine can u give me run down to what im suppose to change & the number to enter?

[@RitvarsPujats]

well I have similar issue with G.Skill 3200mhz, when I enable xmp profile from time to time i get BSOD. I cant help you since i didnt figure it out myself yet

[@foxasdf888]

Please someone help me How do you clear the cache memory in this bios?

[@thinkdiffrent6322]

I want to change my input to the motherboard, how do I do this in Bios?

[@user-ol4qj8pq8g]

hi this is a really late question but I have had the x470 for a while and had a 1600x and tried replacing the cpu with a 2700x and when at idle the cpu was way beyond where it should be and was constantly above 80 Celsius. I don’t know what to do but was wondering if you could recommend something to me as I’m quite new to this.

[@ZagZagSama]

Install Ryzen Master and try the New Ryzen Master power plans in windows. Below 90° is normal temperature according to AMD. So I would not worry too much about damaging the CPU with 80. Your electric bill does matter so try undervolting your CPU.

[@valt1337]

is there any point to set ram to "performance" rather than "normal" value?

[@xGILOW]

I'm using the 2600X on a B450 Gigabyte Aorus Pro and every setting is greyed?! Can someone help me? BFV crashes because of too agressive XFR so I want to OC myself. EDIT: every OC setting for the CPU and RAM is greyed (xmp works)

[@fuhad593]

My gpu is running on x8 gen 3 not running x16 gen 3 do you have any bios settings to fix..?

[@hydeist0666]

I hope you can answer me. Can I atleast overclock if i build with this mobo and 2600 to 4.0 or 3.9 ghz atleast? Thank you!

[@pinkin8012]

Of course you can.. Mine is running at 4200 mhz without any problems. Depends on your CPU of course but 4ghz should be achievable for pretty much every Ryzen 5 2600. My VRM temperatures are totally fine as well. Just have some Airflow in your case.

[@thesheep7634]

Do you know how to solve bad resolution in Bios splash screen ?

[@stellabckw2033]

thankyou

[@megapet777]

When I go to amd cbs it looks very different.. cant figure out how to enable PBO? I have b450 aorus m board

[@jaihayes9647]

Wait? did they remove the ability to set a static core clock which was available on the ax370 gaming k7... why...

[@elielfrost6788]

Do most if not all gigabyte boards with the same chipset share the same BIOS/UEFI configuration? Would the Gaming 7 have the same settings as the Ultra gaming?

[@danilorossi9091]

I have the gaming 7 and the settings are the same, maybe it has one ir two more voltage settings, but the others are pretty much the same

[@sdatgc]

I had an ultra-gaming and upgraded to gaming 7. Gaming 7 has more/better oc voltage settings. Much of the rest is the same.

[@stefanManiak262011]

Hi,I have an issue with my new assemble PC,so everything is ok,temps are ok,the CPU cooler is stopping after shutdown,the gpu the same,is stopping,but the 4 fans from the case aren't,and yesterday after I shutdown the PC I seen that mouse and keyboard if I touch it,the light goes on as well. I think it is a state between sleep and hibernate and shutdown or some' like this! To be honest I don't know what to do...because 1st 2 3 days went ok..and the 4th day in the morning I saw that the fans are running,but the PC was off! So I don't know how to fix this type of problem..instead after shutdown to turn off the PSU switch! I have an gigabyte GA-z270p-d3 mobo,i7 7700 cpu,gtx 1070ti,psu xilence 730w,2x8 GB RAM ddr4,hdd 1tb 7200 rpm. In BIOS i think I have the same settings like in this video,but I never touch any setting only I disable fast boot,because I thought that will fix the issue!

[@alfonsobarredo3047]

how to second monitor? i don’t have internal graphics showing pls help!

[@orionagappe8567]

This question doesn't necessarily apply to this movie in particular but have you considered using per core multiplier overclocking? That way you can still get that sweet single core speed and get a bigger boost to every other core?

[@evolilol5984]

And Virtualization?

[@vincentp98]

hello, i recently updated my motherboard with the f50 bios and it seems that now i have the "cpu power reporting deviation" do you know if i can downgrade this bios ?

[@notbigbadhuffnpuff2034]

Late replay but I heard that you can just downgrade the same way you upgrade your bios so try that.

[@WereCatStudio]

RAM OCing on my Gigabyte board is a nightmare. The board can save profiles... it is just unable to load them............

[@jornmulder]

what is golobal c state control? and wy do many people turn it on disabled ?

[@halligan33nkb97]

I have two Rx 580 8gb. It seems as if only one is working. I have two monitors, each plugged into an Rx 580 via DVI cable. The monitor isn't detected.. Is this a motherboard BIOS issue? orrr..

[@jickoandanar2431]

Please help me. I have X470 ultra gaming with 2700x and an R9 285 video card.. i always get error: THREAD STUCK IN DEVICE DRIVER.. after installing radeon drivers and updating windows update. I cant do anything at all it keeps on appearing

[@triuneentertainment4431]

Im trying to install the OS to the M.2 but it will not allow me to select that drive for installation. I was needing to know what I did because the system sees the drive but will not allow install onto it.

[@420inportland]

I know this is an old post, but has anyone here managed to get the "smart hud" to actually work? all I get is sound.

[@michaels2767]

My usbs stopped working after I updated to 42b. Any ideas why?

[@VithorLeal]

I wish I could have some of the BIOS features of that board in mine (which is a GA-Z170XP-SLI, not the greatest, but it was cheap enough ^^). Specifically, could I somehow edit a BIOS to include the fan control features of that board into mine?! That'd be great...

[@myfellowsonicfans7131]

I’m getting BSOD constantly, like almost daily, and I can’t figure out why but they’re always 124 errors. It’s always related to hal.dll and pci.sys and of course ntoskrnl.exe

[@sharifnasser7635]

Changed to pcle to gen 3.

[@viper379]

where is the secure boot option?

[@reredepepe1121]

Can confirm x470 aorus gaming 5 has the same crap gaming 7 has.

[@volodymyr8649]

So, Msi X470 gaming plus or this for r5 2600? Main importance - vrm quality.

[@doj3211]

You should get a ryzen 5 2600x if you plan to get x470

[@lrmcatspaw1]

I have the X370 gaming 5 and the bios is different 8(). It has fixed Vcore, it has load line calibration.... Still Cant get my ram overclocked, but I blame my CPU for that.

[@darielsantos5903]

Hey man, is there a reason I don't have PBO on my BIOS? I want to oc my r5 2600

[@ahmedalaa133]

Can you update the x470 gaming 5 without a cpu to use with Gen 3 from Ryzen ?

[@wadadli4sun]

No, you need a previous gen to update the BIOS.

[@mattfactor5278]

this board or crossair vii hero? thanks

[@jononaka4921]

if you don't have a problem with money. I would say Go for CH7

[@cooldeepak946]

Sir im using same motherboards. Using WD Blue 7200 rpm HD after some days harddisk lagging. Change harddisk same issue. Sir any setting in bios to fix

[@Kephers7]

Just build a comp using gigabyte.. it wont see my m.2 nvme drive in bios. Though the nvme is lighting up. I updated bios to the m.2 update. But it still wont show up.... Any ideas?

[@sheepsgangneo]

Hello but in dont now how i van activate internal grepichs can you contact my oke

[@pawenowak5907]

I have problem because in Peripherals i dont have like legacy USB support, xhci hand off can anyone help?

[@jjno]

My gaming 7 wifi x470 freezes and stutters for a couple secs or so when navigating through the bios. This is a brand new setup and happened on the first ever bootup. Help!

[@ivanstoltz5649]

i found that if you press the delete button near entering the bios it causes weird glitches, if you spam the delete key like im used to with older motherboards try just pressing it once when the intro logo pops up, or use the fastboot app in windows to reboot into bios and relax till your'e in, if you still have the issue, you might have to update the bios

[@carlosbacasoto102]

What I can setting up to run my ssd m2 samsung 970 evo plus on the bios? Help me please and sorry for my english.

[@aronmc3321]

Did u soove that?

[@aronmc3321]

Solve

[@carlosbacasoto102]

@@aronmc3321 No, Just I can use it how a second disk.