Bios Settings 7950x3D 7800x3D [Asus Rog Strix B650E-F]

[@Mateo_FPS]

READ BEFORE DOING If the pc doesn't boot up after applying settings, RESET BIOS BY REMOVING CMOS BATTERY OR PRESSING THE BUTTON THAT RESETS BIOS, Re apply settings but this time ... Leave sata controller to enable make sure you are only running 2 ddr5 ram sticks and not 4 to achieve high speeds If you have any questions, feel free to ask and I'll help the best I can

[@s4fety545]

Hi, can i use this setting for the x670e-e gaming wifi ? I have it with the 7950x3d. Thanks for the help

[@Mateo_FPS]

@s4fety545 yes!

[@s4fety545]

I did all changes, my pc crashes, so i undo the the undervolting still crash if i start a game. Can u pls help me out ?

[@Mateo_FPS]

@@s4fety545 pc specs?

[@s4fety545]

X670e-e, 7950x3d, 4090, 32Gb 6000mhz RAM (2 sticks), my PC crash now without doing anything. Loaded default bios setting- still Crashes now. Did i damage some Thing?

[@TakeNoteZ]

If you applyed all the settings and for some reason you keep goin straight to the bios repeatedly just go to the option where you dissable SATA CONTROLLERS ( advance/SATA CONFIGURATION ) . and set it back to Enable and try it , thats what help me in other to go into windows and not to bios.

[@aliviewss]

Even though my pc lost around -1.7% cinebench r23 score, but the cpu temp went down by 10c on full load! 7800x3d, disabling power down and memory context restor did not work well, it took a minute to boot so i re-enabled them which fixed the booting issue, thank you

[@just_OsaMa23]

Bro it's an option for training the ram before booting.. so it will add some seconds for booting..

[@LateralPause]

Bro you really helped me and saved me hella time thanks.

[@-.Der.Dennis.-]

If you put the memory context restore to enable, you boot time into windows is much faster.

[@Caxxyfv]

For less instability

[@RaizuYT-vb5sv]

@@Caxxyfv is it less stable or just checks memory stability?

[@Caxxyfv]

@@RaizuYT-vb5sv research the setting

[@lain1178]

I have no idea what I just modified in each option in the video, but I have more fps and less consumption, please make an undervolt one for the 7900XTX. thanks and regards.

[@q8-shooter330]

No drop fps thank you bro you are Legend ❤

[@christian-in3qi]

Can't wait to see a video just on Asus motherboard and only for the 7950X3D full stable settings great videos man keep up the good content 👍👍👍👍

[@taykuu2130]

this literally fixed all my problems idk what it was but before I would play a game and try watching Netflix on my second monitor my pc would crash but not no more it’s been running perfectly for hours and no crashes

[@corbinbrozewski4234]

7800x3D with Same board B650E-F DOCP1 enabled also enable PBO and curve optimizer, neg 30 Now I'm running a consistent 5050Mhz stable in all games!

[@DiIsimBR]

The best overclocking! 👏🏻👏🏻👏🏻

[@orangedan5424]

This setting work great👍 Previously i have failed at negative 30, now it passes prime for hours. Thank you.

[@huszaghistvan3209]

BIG THANKS. I almost returned my machine. It's been 25 years since I put AMD together for the first time with this board and 7800x3D cpu. It kept freezing when restarting, it didn't go any further. I went through everything and lo and behold, the RAMs are stable, running at 6000, and the reboot hasn't frozen for days. THANKS

[@Mateo_FPS]

@huszaghistvan3209 glad it helped!

[@vinzenzweinert3180]

Fixed my FPS Micro Stuttering Issue. Thank you so much 🎉❤

[@PeteN75]

Did you set in Bios to prefer cache, frequency or auto? I haven't found this in your walkthrough. Thank you!

[@augustgrnkjr7697]

good question im asuming cache is the best for x3D's

[@Mateo_FPS]

Frequency for both 7800x3d and 7950x3d, it's mostly usefull for the 7950x3d on the 7800x3d it does nothing if you select either

[@CichlidVibes]

For 7900x3d and 7950x3d you should select “driver”

[@PeteN75]

@@CichlidVibes ok, will try this as well

[@sutty101]

Each reply saying something different. Cache: It will set everything that runs to prefer the first 8 cores. (The X3d Cores) Frequency: It will use the cores with the highest clocks. This normally being the last 8 non x3d cores. Unless are limited. Driver: This will use the x3d driver in windows that gets installed with your Chipset and I think requires Game bar to decide what cores to use (IE Gamebar will detect a game and set its cores to be the x3d cores) Something missing is also that Asus released a separate BIOS option, that uses an equation to work out if a game is running. called Core Flex. Found under Ai Tweeker. While leaving the Settings above set to Auto.

[@christian-in3qi]

7950X3D curved optimizer per core 0-7 and 8-15 stable negative numbers to use

[@milordas]

for me working -15 all cores, as -20 was sometimes pc reboot

[@Evilbigboss101]

On tbe new x870e hero ASUS do u know best m.2 slots to keep everything at max speed x16

[@Mateo_FPS]

@@Evilbigboss101 your mobo manuel should tell you which is your main slot

[@SensibleChuckle]

Are these settings good for the 9950x? Thank you, Sir.

[@Mateo_FPS]

I would try them out, i havent had the chance to try it since i dont own one yet

[@JohnnyTomala33]

Are You sure CPU current capability should be 120%, CPU Power Duty Control Extreme, CPU Power Phase Control Extreme and VDDSOC Current Capability 120%?

[@xxktulxa7182]

How to understand which core is the best? Which should be done -20 and the rest -30?

[@Mateo_FPS]

Download ryzen master and it will show you your 2 best cores with a star and dot , those you set to -25 the rest -30

[@MILOALESSOCONNER]

I honestly didn't notice a noticeable change, I feel the same.

[@Mateo_FPS]

If your not gaming at 360hz with a 4090 or 7900xtx this is pointless to do

[@MILOALESSOCONNER]

⁠ ⁠ ⁠ if I have a fps rate above 700hrz, as soon as I perform a bechmark and a stress test and if the numbers went up, I already saw that 8 processors run above 5,200 mhz and the rest at 4,500 mhz almost fixed, I have Ryzen 9 7900x3d and rx 7900 xtx, I think if I improve, R6S gives 2739 fps in main and in game 400fps, more games need to be tested.

[@MILOALESSOCONNER]

@@Mateo_FPS

[@mite_jan]

does disabling sata if you dont use them have any actual performance effect ? also on the settings why did you not increase the boost clock +200mhz , scalar option has effect to keeps the clocks higher

[@Mateo_FPS]

It won't effect performance in terms on fps but it should slightly reduce overall system Latency, the more things you turn off the better, I saw no difference in gaming when boosting the clock and changing the scalar from the auto option

[@byDo4a]

Is there any way to customise the r9 7900x ? ASUS Tuf gaming x670e plus 😢😢😢

[@Mateo_FPS]

Same thing,just copy the settings that are applicable to your mobo,

[@byDo4a]

@@Mateo_FPS What I don't understand is, will they increase the frequency?

[@Mateo_FPS]

@byDo4a if you undervolt you have the potential to increase frequency, the higher the more fps you can achieve, probably up to 10fps or more in gains, which might not seem like a lot but companies try to sell new cpu that are barely 10% increase performance

[@mcdonaldsm925]

Hey great vid!! ..I have a Asus rog x670e extreme .. with a 7950x3d paired with a MSI water-cooled 4090...will these exact setting be good for my build ...I sometimes get random crashes while gaming

[@Mateo_FPS]

@@mcdonaldsm925 yes, the only thing that might change is the curb optimizer, try these settings out and see if it stable or if it doesnt boot up remember to reset bios by removing cmos battery or pressing the button that reset bios

[@1688voyager]

Thanks! Got significant performances boost! ❤ But I got a screen freeze sometime when the pc went idle for like 5-10 mins, tried lower the curve optimizer from 30 to 26 but it still happened. Any clue?

[@Mateo_FPS]

@@1688voyager watch this video it should tell you why it crashed kzbin.info/www/bejne/hH-cZauonp59qtksi=rgrfkKdrhxFOScgY

[@1688voyager]

@@Mateo_FPS Thanks! Update for my case: It show "Window Search Service" errors when the screen freeze. 1. Tried fixing that error follow others, not work. 2. Tried using System File Checker, not work. 3. Re-do all step back to default other than AI tweeker, not work. 4. Lower curve optimizer to 24, seem work now. Screen no more freeze after gaming/ working for 3 hour, will keep monitor it. For step 4 I just load back the profile with all the optimize steps.

[@Mateo_FPS]

@1688voyager you can also use occt program to stress test your system

[@metalmeltdown31]

Picked up some gains ,4-6% improvements in the mid range cores of the cpu following your tips. Thanks!

[@ThisIsZaph]

How I got lower scores in 3d mark and cinebench

[@lewisghouse4020]

what should the primary memory timings be for ryzen 7 7700X, it defaults at 36-44-44-96, just wondering what will be best

[@Mateo_FPS]

Just use the profile that your ram sticks came with and see if it's stable, the profiles are good already, even if you tweaked them manually you won't see much performance gains but if your interested in ram Timmings I recommend you watch buildzoid channel , he has a lot of content about rams sticks and timmings

[@dailygoalrush]

Do you have pcpartpicker link for this? How would will this cost if you bought it today?

[@dragon6778able]

is there a reason you did 1/3 times to flck? ive never heard of that and was wondering if it was a new thing for 6000mz ddr5 sticks?

[@Mateo_FPS]

Maybe I shouldn't have word it 1/3, but most people/"experts" say for ddr5 the flck should be speed/2 and then divide 1.5,....6000/2, 3000/1.5, so It would be a 1:3 ratio, this should be a typical stable oc that would work for everyone but it can still be fine tuned to a specific computer, it can be lower or higher depending on what the computer allows you to do

[@dragon6778able]

@@Mateo_FPS ahh i see ill definitely do more research on that for my next build!

[@eracer1111]

@@Mateo_FPS I tried FCLK=2200 on my DDR5-6400 and the system wouldn't POST. Had to do a CMOS reset. 2133 (1/3 rated MT/s) is working perfectly, and I did see a slight performance boost with my 7950X3D.

[@dkindig]

@@eracer1111 Generally for best performance you want to keep your fclk at 1/3 your mem freq. I'm running 6000-certified ddr5 at 6400 with an fclk of 2133. Pushing fclk is where the silicon lottery comes in and 2200 I think is hard to obtain for the 7800x3d. Actually 2133 is pretty good.

[@theemperor1191]

Hi there. My cpu is Ryzen 9 7900X. Is this works with your setting? Thank you.

[@Mateo_FPS]

@@theemperor1191 yeah, the only thing will vary is the undervolt, all core -30 and if it blue screens or doesnt start, restore to default settings and go in the bios and reduce it by 2 (-28) and check if its stable and if it blue screens repest the process, the 7000 series cpu should handle an undervolt -20 - -30

[@theemperor1191]

@@Mateo_FPSThanks a lot. My rigs are Rog Strix B650E-E and Ryzen 9 7900X. I did tweak a bit, thermal 80, curve -20. Works perfectly now.

[@fernandocastro344]

In the video above, it didn't show all the teams from memory; would it be the same as what appears in the DOCP?

[@Mateo_FPS]

@@fernandocastro344 yeah

[@Snaplexity]

hey thanks I was wondering PBO enhacement or enabled is enough to hit 5ghz on 7800x3d?which settings to choose on strix b650E E

[@Mateo_FPS]

@Snaplexity if you follow the video, it will give you the best performance, if you want a steady 5ghz you will need to cmd promt a code to have your pc at full speed the whole time (not recommended)

[@Snaplexity]

@@Mateo_FPS yes i know just wanted to be able hit those mhz sometimes..iam hitting around 4850 4900 .didnt do anything in bios except enabling 6k mhz speed expo on 2x32gb kit rams

[@Mateo_FPS]

@Snaplexity the only other thing you can do is debloat windows to increase performance, turn off resize bar(major increase in cpu performance-decreases gpu performance)

[@Snaplexity]

@@Mateo_FPS donta wanna do that..do I need only pbo to enabled to achieve hit sometimes 5ghz?..since other guy was messing with negstive 20 30 thingy ans cant boot windows anymore even after default

[@Mateo_FPS]

@Snaplexity -30 should be easily achievable, every pc will give you slightly different results but this is something i did with 3 different mobos and 3 different cpus and it all worked out fine, sometimes people miss a setting or dont input the correct thing and it changes the result, if it doesn't boot up, all you have to do is reset bios/remove cmos battery and it works fine after that

[@superwin88]

Hi, i have a question that after setting up. the booting time is slower. any clue to boot up faster?

[@Mateo_FPS]

@@superwin88 just turn on memory context restore

[@bens5791]

What are your thoughts on using Armoury Crate? Going to try your BIOS setting soon.

[@Mateo_FPS]

I don't use armoury crate I Uninstalled it,I never found a use for it, it was a program running in the background, this will hurt your 1% lows , what do you use armoury crate for?

[@bens5791]

@@Mateo_FPS I thought as much, I don’t use it for anything, will uninstall, thanks.

[@bens5791]

@@Mateo_FPS what is the best way to uninstall AC, I have read people have problems getting rid of it.

[@Mateo_FPS]

@@bens5791 uninstall from bios, watch video from 8:35, if it's still their after you do this, download revo Uninstaller and use that to Uninstall

[@bens5791]

@@Mateo_FPS Neg 30 on all cores, haven’t tried to go any further yet, all stable at this stage. My only concern is my idle temp is now 50-52C, should I be worried about this?

[@marcusbuschmann3281]

Hey why is there a difference betwen this video and the crossair one the undervolting on the 7950x3d and on this video u disable intergrated graphics but not on the crossair video?😊 im just trying to figoure out whic to fallowe since this video is newer

[@Mateo_FPS]

That video was the first one I made, so I might have missed a couple of things as far as undervolt their is different ways to do it, this is a simplified version and more recent, so follow this one instead, I'm still looking more into the bios to see what else I can modify

[@ElisNnL]

This work 10000000% thank you my friend

[@UziValo]

TPM 2.0 is not recognized now even though I have enabled it in BIOS and my fans dont light up now. I cant load Valorant because I get an error code from Vanguard saying TPM 2.0 needs to be enabled. Any solutions?

[@Mateo_FPS]

@@UziValo reset bios by removing cmos battery it will restore your settings back to normal or press the button the reset bios

[@Jarrahfe]

I still miss a setting on X670e-e gaming wifi ASUS - sometimes on reboot system stuck with 0d error code

[@benmcnicoll5441]

Would this apply for a b650e-e with a 7800x3d

[@Mateo_FPS]

Yeah

[@Raven-vb1pl]

this work with a Asus ROG Strix X670e-E gaming WiFi ? using a 7800x3D and Corsair6000mhz ddr5

[@Mateo_FPS]

Yes

[@Mateo_FPS]

If you have any issues let me know, these settings are super basic it should work

[@KahluaMike67]

I've tried everything and I can't get windows to auto park cores when running a game thru Gamebar. Any idea what could be the issue? I've followed all of the instructions online and all of my drivers, etc are updated. I have a Asus B650, 7950X3D and a Asus RTX4090

[@Mateo_FPS]

Did you use process lasso?

[@KahluaMike67]

@@Mateo_FPS I just figured out what was wrong and I feel stupid as hell 😂 I did have the the windows power plan on Balanced. I switched it and now it's parking like it should

[@rocxgaming6368]

@@KahluaMike67 Hi, and what did they switch to?

[@sergiimelkumian5796]

I want to do smth similar but with my 5600x should I go and follow the Visio or it will be a big difference?

[@Mateo_FPS]

Everything should be similar, the main difference is how much undervolt it can do

[@Keyosu]

For the CPU SOC and MC voltage, I’ve heard this should be manually set but I noticed you have yours set to auto. Is auto safe, and would a manual setting of say 1.25v have a negative impact on both?

[@Mateo_FPS]

I have had no issues with auto, you can tweak any of these settings as well, try it out

[@Friarello_]

Disabling the c-state iommu and df-state doesn't heat up the processor more?

[@Mateo_FPS]

If you have a good aio or a good fan this should not effect you at all, but if you cheaped out on a cpu cooler it will get warmer, nothing that will damage the cpu. Since the cpu will just throttle down if it gets too hot

[@Friarello_]

@@Mateo_FPS i have an kraken elite 240mm

[@Friarello_]

is good?

[@Mateo_FPS]

@Friarello_ yeah you should be fine

[@nothingtoseehere1337]

i have so many questions to like why sata controller disabled, and why.. im just looking for lower temps for my 7800x3d is lowering core by -30 enough?

[@milordas]

as many as cpu is stable in long term load

[@Foxfreud]

as someone who knows a bit of these setting Load Line Calibration is a big one. It basicly sets a parameter of how step the voltage can be 3 and 4 are letting your cpu get more voltage. You can set load line calibration to 1 and see if its stable with the same performance

[@marevulto]

⁠@Mateo ok and is better 2x 48GB with 6000mhz or better 4x 24 and reduce of 4200mhz ?

[@Mateo_FPS]

@marevulto depends what you are trying to do

[@marevulto]

@@Mateo_FPS Gaming most cod cs and indoor Check because my system have so bad time spy ranking. I only have. 34158 points gpu ASUs strix 4090oc and 15533 cpu all 3100

[@Mateo_FPS]

@marevulto you want to be running 2 ram sticks high speed then

[@cliche_AF]

Does this strix version have SP ratings for cpu's?

[@wilerz]

Hey any idea after adjusting PBO w curve to -15 all cores , I dont get a BSOD or crash but the cpu cores downclock to 545mhz randomly and system becomes slideshow? after a few minutes the cores boost back up and system runs fine. Did CB R23 benches and no issues there.... weird

[@Mateo_FPS]

I would reset the bios and see what it does , if the cpu is still acting up it might be windows or cooling problem

[@Anton-ct6ou]

Thanks for the vid man, these settings work very well for me. One thing that I found that can make it better is instead of selecting the processes in process lasso, you can go to cpu affinity and add a wildcard for * and set it to the other ccd. That way it’s gonna apply to all the new processes that may get started while you play

[@Mateo_FPS]

I'll look into it, I appreciate the suggestion I'm always looking to improve and sharing it

[@metalmeltdown31]

How do you add a wildcard? I usually just manually lock the games once I launch them (after clients locked to cache ccd). Would that do the same thing?

[@iliyarezvanfar25]

Can you give me the safe options to use for my 7800x3d

[@Mateo_FPS]

@iliyarezvanfar25 enable your xmp profile and undervolt all core -20, but in reality these settings on this video are safe, worst thing that can happen is it doesnt boot up but you can always reset it and everything is back to normal

[@N-ro8wv]

Hi bro, just want to make u know that you make my PC a complete monster, now games feel completily responsvive. Im running 4070 ti and ryzen 7 7800x3d. Thanks❤

[@Mateo_FPS]

I appreciate the comment, I just made my channel to help others, I know it's frustrating that utubers are just making videos for click bait without actually giving you the right info

[@N-ro8wv]

@@Mateo_FPSdo u do anything else to decrease input latency?

[@N-ro8wv]

Apart from overclocking controller and nvidia settings

[@Mateo_FPS]

@N-ro8wv the only other part to check is turning off background services that you aren't using or bringing down the processes running

[@Golyem]

This has helped me a lot thank you! My 7950X3D with 2x32gb sticks of DDR6000 ram, proart x670e benefited from the curve settings by putting the CCD0 to -20 but left the 8-15 cores at P0 since putting them at neg10 started to cause memory crashes in windows.. but it works amazing now. Quick questions: 1- In the vid at 0:56 you select asynchronous mode ...is that needed if im not changing the dimm timings (sticking with expo2 default). 2- In the Core Flex at 5:25 : Can I use those settings if I only did the CPU core curve and the blck @2000 (I didnt overclock cpu nor touched dimm timings)? The way the vid is set up seems to be that it all works together. Thanks again!

[@Mateo_FPS]

You can leave it to default, no need to use asynchronous theirs not much benefit from using it I stopped using core flex and I use process lasso instead on my 7950x3d

[@milordas]

@@Mateo_FPS just use cppc on "driver" instead and lasso is not needed anymore

[@shawnlochman133]

What are yalls temps with this CPU? Mine will ship in a few days. Edit: What type of cooling are you using?

[@Mateo_FPS]

@@shawnlochman133 aio pump

[@RootAmnesia]

I am running a PC with the exact same CPU and Motherboard as you, but for some reason anytime I enable PBO it will no longer POST (even without any of the other changes you recommend). Since it looks like it that’s not a problem for most others, any ideas what the issue could be?

[@Mateo_FPS]

What's your pc specs?

[@RootAmnesia]

@@Mateo_FPS Motherboard: ASUS B650E-F ROG STRIX GAMING WIFI AMD AM5 ATX CPU: AMD Ryzen 9 7950X3D Raphael AM5 4.2GHz 16-Core GPU: Radeon RX 6600 MECH 2X Memory: TeamGroup T-Create Expert 32GB Kit (2 x 16GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit CTCED532G6000HC30DC01 Cooler: ARCTIC Freezer 34 Esports Duo - Tower CPU Fan with BioniX P-Series case Fan in Push-Pull, 120 mm PWM CPU Air Cooler, for Intel and AMD Socket, LGA1700 Compatible Power Supply: be quiet! BN513 Pure Performance Power 12 M 1200W Modular Quiet Performance Power Supply | 80 Plus Gold | ATX 3.0 | for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors | Silent 120mm Fan | BN513i SSD: Crucial T700 2TB Gen5 NVMe M.2 SSD

[@RootAmnesia]

@@Mateo_FPS Motherboard: ASUS B650E-F ROG STRIX GAMING WIFI AMD AM5 ATX CPU: AMD Ryzen 9 7950X3D Raphael AM5 4.2GHz 16-Core GPU: Radeon RX 6600 MECH 2X Memory: TeamGroup T-Create Expert 32GB Kit (2 x 16GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit CTCED532G6000HC30DC01 Cooler: ARCTIC Freezer 34 Esports Duo - Tower CPU Fan with BioniX P-Series case Fan in Push-Pull, 120 mm PWM CPU Air Cooler, for Intel and AMD Socket, LGA1700 Compatible Power Supply: be quiet! BN513 Pure Performance Power 12 M 1200W Modular Quiet Performance Power Supply | 80 Plus Gold | ATX 3.0 | for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors | Silent 120mm Fan | BN513i SSD: Crucial T700 2TB Gen5 NVMe M.2 SSD

[@Milotch]

The rgb are off now how can I turn them on ?

[@Mateo_FPS]

@@Milotch re watch the video from 5:27 light settings are their

[@DendiLBN94]

Thanks, my 78003xd CPU is finally running quietly and not overheating, but sometimes the system freezes or there's a Windows crash. Do you have any suggestions on what could be changed to make it more stable?

[@Mateo_FPS]

Stress test it on occt, if you get an error than reduce the undervolt by 2 test again and repeat until you can stress test 1 hr without errors, if you want to know how to do per core later on, just hit me back up

[@DendiLBN94]

Thanks for quick response! Do you use discord? I will try on 28 now.@@Mateo_FPS

[@DendiLBN94]

Thanks for quick response, I will try on 28, Do you have dc?. yh on occt i did get bs after 10 sec lol@@Mateo_FPS

[@Mateo_FPS]

Try this instead Set -30 curve per core on cores 0-7 Go to occt Cpu option Data set- large, mode-extreme, load type-variable Thread settings- core cycling Type-custom Physical core configuration P0 make sure it has a check mark and cores p1-p7 make sure it has an arrow Cycle internal -45 seconds Threads per core -32 Then click start This should tell you what core needs less undervolt

[@DendiLBN94]

@@Mateo_FPSI will do ! thank you very much

[@lewis21388]

Is it worth applying a core voltage offset with pbo combined together or is it unpredictable instability for no performance/Temperature reduction, im currently using a -0.0500 on voltage offset

[@Mateo_FPS]

I wouldn't do any offset, I would leave it to whatever you expo/docp profile sets it at, and if you are worried about Temps, under the pbo setting, thermal throttle limit I put it at 89 which is the max(safe) but you can reduce to whatever you like , but do keep in mind limiting the voltage and thermal capacity you will lose performance

[@lewis21388]

@@Mateo_FPS thanks for the advice mate, I’ll turn it off now and I’ll experiment with the pbo limits, currently on 150ppt 100 edc and 140 tdc

[@ivanoantunovic-y7d]

Fortnite is always crashing when im playing it it feels very smooth and after some time it crashes can u help me? thanks for the crazy good bios settings

[@Mateo_FPS]

@@ivanoantunovic-y7d it can be various things, might be game or graphics driver, or the undervolt on cpu, maybe the oc on your gpu

[@MrOsa590]

Hey! Asus strix x670e-e 7800x3d Corsair dominator titanium 6000mhz cl 30 2x32 Cant setup ram freq CPUZ showing 4800 cl32 when I able expo motherbord showing 6000 but when I check by cmd and cpuz still locked 4800 cl32 any thoughts?

[@Mateo_FPS]

Go to task manager Performance Memory Speed : Check what your speed is here Cpu z only shows you half the speed on memory tab I'm running 6000 but on cpu z it's showing 3000, on SPD tab does your max bandwidth show ddr5 6000 (3000mhz)

[@Mateo_FPS]

If you did change it in the bios and it doesn't show in cpuz you can try uninstall cpuz using revo Uninstaller and re install cpu z

[@MrOsa590]

CMD with command: wmic memorychip get speed still showing 4800mhz @@Mateo_FPS

[@dronestyle2917]

Hello i have on 7800x3d, asus strix b650 and 6000mhz cl36 corsair rgb but it’s impossible to start at 6000mhz (black screen and back in the bios with a safe mode), at 5200mhz it’s OK

[@Mateo_FPS]

You don't have to do safe mode, just reset bios by removing cmos battery or click on the button that resets bios settings, you should be able to run 6000mhz

[@RodrigoBraga]

Hey, I am noticing my boot always goes through the mem training... Yours on the end doesn't, any tips for disabling it?

[@Mateo_FPS]

Mine did I just clipped it, but if you want to boot up faster, make sure fast boot is on and memory context restore is enabled

[@RodrigoBraga]

@@Mateo_FPS thank you! Any advantage on letting it do the full process?

[@Mateo_FPS]

@RodrigoBraga some people notice issues with stability with memory oc and disabling memory context restore will solve it , but if you have no issues then leave it enabled

[@rodica2.0]

Hi, can i use this setting for the asus 650e-f gaming wifi ? I have it with the 7800 3xd and ram Corsair VENGEANCE RGB DDR5 32GB (4x16GB) 6000MHz C30 since my system is a bit unstable. Thank you very much for your availability.

[@Mateo_FPS]

Yes, and read my pinned comment before you start

[@rodica2.0]

@@Mateo_FPS ok tks

[@ibot-u3s]

Are You going to make video for x870-e asus boards ?

[@Mateo_FPS]

@@ibot-u3s i will but ill wait till the new 3D chips come out

[@ibot-u3s]

@@Mateo_FPS goat , im using your bios setting curently and im fine with -40 . i linked your video to some ppls who was have problems with stable -15 now -30 with no issues . w8ing for new boards video :D thx for share

[@Mateo_FPS]

@@ibot-u3s -40? Dammm are you doing water cool?

[@ibot-u3s]

@@Mateo_FPS ive got custom loop

[@muhammetmustafademirci]

Merhaba. Bunu denedim. B650E-F / ryzen9 7900x ve 4x corsair 6000 mhz. Bilgisayar asla açılmıyor. Acaba 4 ram olduğu için mi?

[@jkd4568]

disabling memory context restore makes my bios boot time go from 9 seconds to 40 seconds. Why would I disable this?

[@Mateo_FPS]

Some people have issues when they oc their memory, so disabling memory context restore will help with stability, but if you care about boot times then leave it enabled but if you have issues with memory, disabling this will help out as the pc makes sure it's all good before it boots up

[@eracer1111]

Understand what MCR is. Normally, RAM is tested and trained at every reboot if necessary. Enabling MCR disables the memory training. It can increase boot time, but isn't it worth a few extra seconds to get better stability?.

[@jkd4568]

@eracer1111 I have no issues with stability and it's not a few extra seconds. It makes my pc boot 4x slower.

[@drippydrip6849]

Will this work with my Newly released 7600x3d matched with a asus b650plus Wi-Fi and a 6750xt! I’m hoping I can tweak it like yours with my 7600x3d. Thank you! Amazing video

[@Mateo_FPS]

@@drippydrip6849 yes! The only thing that might change is the undervolt settings i would start it -20 and if it boots up and seems stable change it to -22 and just repeat it, -30 should be you max undervolt

[@RADkate]

hey my 7950x3d is now hitting max boost finally lol, i dont know what i did but it was never boosting higher than 5350 before with a - 27 offset

[@Mateo_FPS]

Glad to hear it!

[@Luckytmj97]

I tried optimizing and did COD mw3 benchmarks and i seen a good improvement

[@Mateo_FPS]

If you do per core stress test on occt you can get another boost in performance but it is time consuming and I'm talking hrs like 8hrs min of stress testing

[@Luckytmj97]

@@Mateo_FPSsome guy in one of my benchmark videos said to adjust the “cache frequency” idk what tat he means by that.

[@Mateo_FPS]

I think he meant to change your cores from cache to frequency, somewhere in the common options in the bios, it says something like *cppc preffered cores*

[@TheOvershotjesse]

Would this be ok for everyday use ?

[@Mateo_FPS]

@TheOvershotjesse yeah, i used these settings since the chip came out and i game about 6-10 hrs daily but if your not going to be gaming then theirs no reason to do this

[@TheOvershotjesse]

@@Mateo_FPS hell yeah ! I did everything like in the video , except the fan being at full speed I left it on turbo . What gpu do you have?

[@Mateo_FPS]

@@TheOvershotjesse i have 4090,3090,7900xtx

[@TheOvershotjesse]

@@Mateo_FPS u have it undevolt ?

[@Mateo_FPS]

@@TheOvershotjesse my gpus are always OC

[@FarhangHeshmati]

Hi. Appreciate your video. I got a WHEA error on OCCT at -30. What are your suggestion? Should I try -28 or -25 or something else? (7800X3D Water Cooled + Asus TUF B650)

[@Mateo_FPS]

Are you in per core or all core? If you go to event viewer in windows and see the whea error, if it says cpu or processor you will need to reduce the undervolt, I believe the apid Id/cpu core Is 1/2=0, 3/4=1, 5/6=2...etc Example.. if it says something about processor/ cpu it will also say something about apic id and their will be a number next to it so if it says apic id 8, that means you need to reduce the undervolt in core 3 by 2, I would repeat this until all whea errors are gone, I'm not in front of the computer right now but I'll update me reply with the actual whea error message when I get on my pc

[@FarhangHeshmati]

@@Mateo_FPS I reduced the undervolt to 28 and so far no WHEA error on OCCT. Tested some light gaming and seems good so far. By the way, if I disable the Security options from BIOS, I can't login to Windows 11.

[@psphinx]

I’m using 4 sticks of ram… how should I setup that way?

[@Mateo_FPS]

@@psphinx check your motherboard manual and only use 2 ram sticks that came together in the same package and put them in the slots that the manual says to put them in

[@psphinx]

@@Mateo_FPS dang so I can’t use these settings either 4 sticks of ram. I’m running the b650e-f

[@Mateo_FPS]

@@psphinx what type of ram do you have? And why do you need 4 sticks of ram?

[@psphinx]

@@Mateo_FPS Corsair vengeance ddr5 6000

[@Mateo_FPS]

@psphinx did they come in a 4 pack or did you buy 2 sets of ram?

[@xxktulxa7182]

Friend, help... 7800x3d, gskill 6400 cl 32, xpm. ASUS b650e-e... I can safely apply your settings for x3d, but ddr5 set the DOCP profile 1...?

[@Mateo_FPS]

Yes

[@onpatrolforthejuice]

You most likely need to drop your xmp to the 6000 setting. I have almost same setup as you and I needed to do this. Assuming you have 32gb of ram on 2 carts. So 6400 cl32 32gb. I'm on the gigabyte b650 auroros elite, 7800x3d

[@xxktulxa7182]

Is 120% safe for VDDSOC Current Capability? What does it change? Soc voltage not to lead 1.3? Thank you, friend, for the answers!!!!

[@Mateo_FPS]

If it's not in red its safe

[@xxktulxa7182]

@@Mateo_FPS Do 120% increase the voltage? Or do they optimize the voltage? I have 1.3 in my normal settings bios

[@xxktulxa7182]

@@Mateo_FPS Friend, I don't understand what 120% and 100% mean, what's the difference between them? What's safer? I'm afraid if there's more tension, because I don't understand it

[@Mateo_FPS]

@@xxktulxa7182 100% means normal 120% is allowing more, if the letters are white it should be safe, if you don't feel comfortable then leave it at 100% just not less

[@murtikana]

bro, after I did the setting my fans rgb doesnt work. Do you have any idea which setting causes it?

[@murtikana]

and my case light as well

[@Mateo_FPS]

@@murtikana reset bios, and only do the first part or re watch the second half of the video and look for anything with usb and rgb leave enabled

[@murtikana]

@@Mateo_FPSthanks for the fast reply, I will try

[@murtikana]

@@Mateo_FPSIt fixed.

[@RainOnWarpaint]

I have x670e-f and 6400Mhz memory kit when aet the voltagea on auto it set the SOC VOLTAGE to 1.341v but my Soc LOCAL voltage reading is 1.285 v and the VDDIO to 1.431v is safe ? Ive already updated the bios to 1904

[@Mateo_FPS]

If it automatically did it, it should be safe ,you can also set them to what you want manually if you are worried about it

[@RainOnWarpaint]

@@Mateo_FPS well when I manually set the SOC VOLTAGE to 1.25 and the memory frequency on 6400 my games keep crashing and ran to system instability

[@Mateo_FPS]

@RainOnWarpaint it probably needs more voltage, have you tried running your expo profile settings? And does that work?

[@RainOnWarpaint]

@@Mateo_FPS My kit is XMP BY THE WAY, I've tried to use DOCP 1 with 6400MHz frequency

[@Mateo_FPS]

@RainOnWarpaint without any modifications does your xmp profile work?

[@SolariGib]

Do you not enable pbo in amd settings?

[@Mateo_FPS]

You can put it on either one, it's the same thing

[@jacktheripper6481]

i don't recomment copy pasting these settings because of silicon lottery.

[@francescotrim6369]

thanks you solved my stuttering problems

[@humez91]

I have the exact same processor and mainboard and applied these settings. Every now and then while streaming inside my browser my PC crashes and restarts immediately. Should I increase the undervolting to something higher than-30?

[@Mateo_FPS]

Are you familiar with occt? You can lower the undervolt for now to -28 if it crashes again lower to -25, if it crashes again you have to undervolt per core and see which core is the problem

[@humez91]

@@Mateo_FPS thanks, will try that 👍🏽

[@eracer1111]

The more negative offset (undervolt) you add, the less stable that core can become.

[@xxktulxa7182]

Hi! I'm still studying your build on 7800x3d, gskill 6400 cl32 xpm. I liked the results of OCCT SSE. But I still have the only question, how did you come to LLC 3lvl? LLC has the property of dangerous processor surges, it's very important... It's important to know that it's safe

[@Mateo_FPS]

LLC is more of a trial and error because it doesn't really show what values it has, but if you were to leave it on auto you will probably see no performance loss, it's more for stability of you oc/uv

[@Mateo_FPS]

If you did your uv per core on occt then this setting you should leave to auto, this is more for people who do all core

[@Battugun]

@@Mateo_FPS LLC lvl 3 will Vdrop the use of voltage when the CPU is on high usage.. so more lvl like lvl 4 will undervolt more but will be more unstable.. LVL1 will be almost between the positive and negative line from 0 to -1 for example so u will go more safe not undervolting.. so ur negative 30 all core will be more stable.... or maybe u can increase to negative 40 o 45 all core.. (golden CPU)

[@DarkKeeper-r2o]

Does not work. This is my third 7950X3D on Rog 650e-f and all three I can NOT get it stable more than 10 minutes without rebooting/bluescreen. I have tried -5, -8, -10, -15, -20 but nothing works. I have GSkill 2x 32GB DDR5 6000 GA II LCD 4090 Any idea?

[@Mateo_FPS]

@DarkKeeper-r2o reset bios, by removing cmos or pressing the reset button, and then try this, 1. Enable your ram oc profile and leave everything auto Save and exit, if no issues after 20 mins while gaming go back into bios 2. Enable pbo Set thermal limit to 89 Set per core And cores 0-7 set to -25 Save and exit Let me know if that works, these settings on this video are generic which should work on all 7000 serious cpus

[@marktharpe8653]

I had a problem similar to your I solved it by changing the overclock tuner to expo 1. Besides tht I read the error codes on the motherboard and corrected whatever my manual said the problem was

[@toymaker3474]

update your bios

[@KhaiPham17]

Currently i uv Ryzen 7 5800x3d with co -30 all cores and i just wonder will it safe or stable for longevity if i touch LLC and put all extreme like ur setting, btw i have mb rogstrix b550-xe gaming

[@Mateo_FPS]

Just try it out, if it doesn't work all you have to do is reset the bios, this is not going to destroy your comp, just don't mess with the voltage

[@SwerveNation]

can some of this be copied to asrockx670e steel legend?

[@Mateo_FPS]

Yes, just as long as it's the same name

[@SwerveNation]

@@Mateo_FPS do u have a discord? Can we go in a voice call and I can show u my screen?

[@Mateo_FPS]

@@SwerveNation I don't have a discord set up for this account yet, I can try to help you as much as I can through here

[@Mateo_FPS]

@SwerveNation most of these settings are the same across different mobo

[@SwerveNation]

@@Mateo_FPS ok I'll test these

[@delljoseph1594]

Is that work on x670e f board?

[@Mateo_FPS]

@@delljoseph1594 yeah!

[@RaizuYT-vb5sv]

I have EXOS running but I get instability in games so I have to set it back to auto, I heard its a voltage issue how do I increase the stability so I can have my ram at 6000mhz?

[@Mateo_FPS]

Is your pbo at -30?

[@Mateo_FPS]

And are you familiar with occt?

[@RaizuYT-vb5sv]

@@Mateo_FPS I used it some.

[@RaizuYT-vb5sv]

@@Mateo_FPS -24 on first 8

[@Mateo_FPS]

Set -30 curve per core on cores 0-7 Open task manager Go side bar Details Under occt.exe right click Set affinity you are going to select cores 0-15 Go back to occt Cpu option Data set- large, mode-extreme, load type-variable Thread settings- core cycling Type-custom Physical core configuration P0 make sure it has a check mark and cores p1-p7 make sure it has an arrow, cores p8-p15 make sure it has the red circle with the diagnol line across Cycle internal -45 seconds Threads per core -32 Then click start This should tell you what core needs less undervolt

[@QUAN.410]

System won’t boot to windows now and boot priority option is locked

[@Mateo_FPS]

Reset bios and only do the first half of the video, or turn on sata if you disabled it

[@QUAN.410]

@@Mateo_FPSit was the sata thanks bro

[@SpoiledBadgerMilk]

Man, I have a delidded 7800x3d. Idle 20c. I can not for the life of me get pbo to boost higher than 5025. It's driving me crazy I have insane head room. On a 420 aio open air. What is asus doing . I tried using Amd's overclock in bios. Nope. Then switched to asus overclock still no. It with a 200+ positive offset. 5x multiplier. Curve -15 to -30 all core. Even tuned single core. WTH. It's like there's a bug in asus Bios where it consistently downclocks my cpu. Any thoughts on what im missing here and yes expo is enabled.

[@Mateo_FPS]

@@SpoiledBadgerMilk kzbin.info/www/bejne/jmGypIxmlK2ppqcsi=wFU_OgUwSSpAuka6 try this out

[@taxijessy5009]

Hello what is the version of the bios what you use in the video ? I'm in version 1303 Config : MB : Asus rog Strix x670e-f wifi Cpu : AMD 7800 X3D Ram : Corsair vengeance 2x16 ddr5 6000mhz Gpu : Asus rog strix rtx 3080 Power : Asus thor 750w platinum Since I changed my motherboard processor two RAM bars my PC is completely unstable. If I used a different BIOS than the one recommended by Asus for the 7800 X3D. My PC is very very long and that from the bios. Your adjustment did not solve my problem on the contrary I have a lot of Blue screen now. Impossible for me to find a solution I've been looking for seven days now.

[@DevilishTay]

i did read in some places that c states should be enabled on the 7800x3d

[@Mateo_FPS]

Try it enabled and disable, whatever works best for you and your system, these settings are a good point to start and tweak to your liking, I personally do things for performance

[@augustgrnkjr7697]

Hey again should i change my DRAM Timing Control or should i just leave it as it is (default)

[@Mateo_FPS]

Theirs 3 settings you should change, but not the timings of your xmp profile

[@TakeNoteZ]

thanks for the vid and effort brotha , so i set everythin like you have it but evertime i turn on the pc , It goes straight to bios, dosent give me an error or anything n i already lower the curve to -2 already and it just does the same thing over and over, any idea? 🤔

[@Mateo_FPS]

Default the bios and try it again, wait a couple of mins to see if it loads into windows

[@TakeNoteZ]

@@Mateo_FPS oh ok how do i default the bios ? ma bad for my noobieness , i was trying to go to the boot option on the bios to set it to prioritize to start with windows but i cant even find that option

[@TakeNoteZ]

@@Mateo_FPS but dosent all the settings reset to default if i reset the bios ? 🤔 .. i really want to try your settings

[@TakeNoteZ]

@@Mateo_FPS im trying to find out wats not letting it boot up into the windows since its not giving me no errors at all

[@TakeNoteZ]

once i did all your settings , all the boot ssd options are gone, im trying to see if i can bring it back

[@cannonball8885]

My realtek audi has vanished after this, no audio now, it's not appearing in device manager either.

[@Mateo_FPS]

Did you disable the audio?

[@cannonball8885]

Figured it out. Had to re-enable usb audio controller.

[@cannonball8885]

@@Mateo_FPSyeh I figure it out, thanks.

[@Moonplayaa]

Yo I need help, so I set everything up as in the vid (I have 7800x3d and rtx4070ti super) besides curve optimization, I put it on -20. My pc wont boot, or better said it says its unstable and gives me an error, what should I do?

[@Mateo_FPS]

Reset bios and redo only the first part of video

[@Mateo_FPS]

If you still have issues let me know I'll be on my comp

[@Moonplayaa]

Alright thanks, up to where tho? Idk what part u mean..(sry) also I tried -10 curve optimization aswell but didnt work either

[@Moonplayaa]

I set bios back to optimized defaults now its completely frozen

[@Mateo_FPS]

@@Moonplayaa from 0:00 to 3:30

[@MalleBable]

Just built a new system using a 7950x3d and the same motherboard. Scored 1963 on cinebench 2024. Found your vid and did the tweaks. Ran cinebench again and scored 2043. However, after rebooting the system i got stuck in a loop where the system wouldn't boot past the asus splash screen where it would say starting system repair after which it would BSOD with the message system_pte_misuse. I reset the bios to default after which everything returned to normal. Is this a case where you would say i should start lowering the core curve optimizer magnitude by 2 until the system stabilizes?

[@Mateo_FPS]

@@MalleBable how did you set up your curve optimizer? All core or per core?

[@Mateo_FPS]

What ram are you using?

[@MalleBable]

@@Mateo_FPS I did per core. The ram im using is G.Skill 32 GB DDR5-6000 Kit F5-6000J3038F16GX2-TZ5NR, Trident Z NEO RGB, EXPO.

[@Mateo_FPS]

@MalleBable i would re try the settings on the video up to the 3:25 mark and see if it works, also you are only using 2 ram sticks correct?

[@MalleBable]

@@Mateo_FPS Oh i forgot to mention that i already stopped tweaking at that point. Yes i am only using 2 sticks of ram.

[@dustylamborghini]

Nice video, thanks! (subbed) I'm on b650e-f gaming wi-fi, 7800x3d, rx6950xt... I find that these settings don't really do anything performance wise (for me - maybe because this cpu can max my graphics w/o xtra boost needed?)... my cpu freq + temps are the same as before. The only thing that changes this for me is the CORE PERFORMANCE BOOST (I will call this CPB form now on) setting: Auto/Enabled will always push the CPU to 5050Mhz max freq, regardless of PBO settings (both in the asus and amd menus for it), and nothing will effect how it performs. If I turn off CPB, the CPU will default to its 4200MHz max freq, and never go past it. Am I missing something here? Should I not be able to run PBO w/o CPB enabled (keep in mind, this is a setting for AUTOMATIC overclocking), which seems to me to overrun any other settings I make? P.S. I use HWinfo for CPU readouts (HWmonitor clearly does not report correct info when it comes to freq on my CPU).

[@Mateo_FPS]

If you game at 240hz or less their is no need for this, this is for people who game at 360hz and up, I should have probably mentioned this at the beginning of the video, you will see a performance gain if the game is more cpu bound, even the 4090 is not good enough for the 7800x3d/7950x3d Something odd is probably happening with your boost, it will be hard for me to tell from my end, but one thing you can do is, have a power plan for gaming only and a power plan for everything else, meaning your non gaming profile make sure the power limit is not 100% this should turn off the boost

[@dustylamborghini]

@@Mateo_FPS @Mateo_FPS Ok! Gtk! I game at ultrawide 165hz, so I guess I'm good then 😎. But I do notice a slight difference when multitasking, programming and doing graphic design if I don't have boost enabled. So I just was wanted to max the cpu as much as possible w/o it getting so hot (which it does when CPB is enabled). Anyway, big thanks for your reply! I will look into having different power plans.

[@damnminuss3066]

First boot is all right after applying settings , pc works sweet , but after rebooting blue screen comes up. what could be the issue please?! @Mateo_FPS spec : asus rog strix b650e-e , 7800x3d , corsair dominator 32gb cl30.

[@Mateo_FPS]

@@damnminuss3066 what ram are you using and how many sticks?

[@damnminuss3066]

2 stick corsair Dominator 32gb cl30

[@Mateo_FPS]

@@damnminuss3066 what speed?

[@damnminuss3066]

6000mhz

[@Mateo_FPS]

@damnminuss3066 how much undervolt did you put?

[@augustgrnkjr7697]

So this only works for the Asus Rog Strix B650E-F? Or can I apply these settings aswell on my "ASUS Prime B650M-A II"? (i have 7800x3d)

[@Mateo_FPS]

Should work the same, all you have to do is look for the same names

[@augustgrnkjr7697]

alright@@Mateo_FPS TY. I only play CS2 and Rust, do you think I should apply these bios settings, for more fps and 1%lows? And what do you think about "System tuning"? - should i leave it normal or PBO enchancement?

[@Mateo_FPS]

@augustgrnkjr7697 these settings will improve cpu performance by how much may vary, but It will be better than stock, I don't mess with any special features they tend not to work well, I tried them and I lose performance

[@augustgrnkjr7697]

@@Mateo_FPS im quite a boomer. So when i apply theses settings my base speed Ghz will improve right? right now i will get 4.2 GHz (which is the base speed) on 100% utilisation. Isn't that kinda bad?

[@Mateo_FPS]

@augustgrnkjr7697 it's a problem if you have a game open and it stays at 4.2, when you are gaming it should boost up to 4.7-5.1 , if you look at my other videos about full optimization for mw3 those apply to any game

[@Renansilva-tu2fp]

hello dude , this board can handle a 7900x? and , i can overclock like you on video?

[@Mateo_FPS]

Yeah same thing, this works for the 7000 series cpus, just keep in mind that how much UV you can do is going to vary on cpu

[@Renansilva-tu2fp]

@@Mateo_FPS thanks man, help me a lot . thinking about intel or amd plataform... i have in mind a Kit z On 14 i7 intel or Amd B_E Kit with 7900 or 7900x... On same price, what you choose?

[@Mateo_FPS]

@Renansilva-tu2fp you can't go wrong with either amd or intel, if money ain't an issue you can do all intel to get the best but if you are on a budget, get the most out of your money and find deals, I'm all amd and my cpu performs just as good as 10000$ intel pcs, I would go with 7900x, the x versions are always better, Intel - tunning level moderate/hard Amd - tunning level easy/moderate

[@Renansilva-tu2fp]

@@Mateo_FPS in my case in brazil the plataform Z+ i7 14 gen is same for AMD 7900 + B650E. Imm afraid about intel because the overheat... i will buy a 360 liquid cooler but im afraid of high temps, and i see the 7900 and 7900x have tdp of 170w so this is less then any i7 modern breaking 250w easy

[@Mateo_FPS]

@Renansilva-tu2fp just make sure to buy a cpu frame (thermal grizzly) and be generous with the thermal paste, and a good 360mm aio pump and you will be good

[@cgunalp]

Hey there, everything is working great except that i can't open faceitac saying that i have to enable tpm2.0 even though it is enabbled in bios, any help here?

[@Mateo_FPS]

Reset bios, and see if it fixes it, if it does re do everything and leave tpm enabled

[@cgunalp]

@@Mateo_FPS Found the fix, apparently security device support needs to enabled for some reason, thank you very much for the guide!

[@frozensinkpasta]

@@cgunalp I am not sure why this comment is not pinned, you literally 100% have to enable this for TPM to work, thank you sir.

[@FuegoBoricua203]

I keep getting a cpu fan speed detection error

[@Mateo_FPS]

@FuegoBoricua203 did it detect your fan before? Depending what fans are installed they might be detectable, go to the fan and click ignore if your fans are working and you are getting the error

[@francisunderwood707]

I lose warranty if i play with this? And for the armoury crate. I love and use the app since it controls all my devices. Can it work with this settings?

[@Mateo_FPS]

You will if you tell them lol but these settings don't break your system, only when you start messing with the voltage, and you could use these settings with armoury crate, but keep in mind you will lose performance in the 1% lows on your cpu because of armoury crate

[@francisunderwood707]

I got you, its just that I'm a bit scared cause it was a lot of money for me getting this build after a year of saving. Anyway my biggest issue is buzz sound when visually demanding games are played and I'm trying to figure how to fix it and what causes it. I suspect AIO pump. I will try your settings to see if it will fix it. That is how i end up here anyway..trying to fix

[@Mateo_FPS]

@francisunderwood707 what's your pc specs?

[@Mateo_FPS]

@@francisunderwood707 it's either the pump or gpu (coil whine)

[@Mateo_FPS]

@francisunderwood707 these settings are to increase your cpu performance