Bios Settings 7950x3D and 7800x3D [Asus Rog Crosshair x670e hero]

Click on Settings in Video - Quality - Advanced - 2160p60 or HIGHEST QUALITY!! ENJOY!!!!!! :)
Bios Settings for increased fps and reduced latency
Radeon xfx merc 310 7900 xtx
Ryzen 7950x3D (7800x3d)
M.B Asus Rog Crosshair x670e hero am5
Corsair icue h150i liquid cpu cooler
DDR5 6000 ram
1440p 360hz 27"monitor
azeron game pad (Mix of controller and keyboard)
razer viper 8khz mouse (the lowest Latency and smoothest)
Soundcore VR P10 wireless gaming earbuds (best for position and foot steps direction!)
* No Sound EQ needed*
Music : Sakura Girl - Late at Night
Link : hypeddit.com/sakuragirl/lateatnight

[@Mateo_FPS]

READ BEFORE DOING Follow this video instead kzbin.info/www/bejne/oaKkpIF4at12jKssi=B4PmhR6UWQ074YDK If the pc doesn't boot up after applying settings, RESET BIOS BY REMOVING CMOS BATTERY OR PRESSING THE BUTTON THAT RESETS BIOS, Re apply settings but this time leave eCLK mode default settings and the value at 100.00 AI Overclock tuner select the oc profile that comes with the ram sticks also make sure you are only running 2 ddr5 ram sticks and not 4 to achieve high speeds Leave sata controller to enable If you have any questions, feel free to ask and I'll help the best I can

[@JohnSavant]

I have 7800x3d paired with rtx 4090. My mobo is Asus X670E-A, using the latest update 1709. Can't wait to test these settings, just what I needed.

[@WestDrop]

if you dont mind me asking, what is your average idle cpu temp on the 7800x3d? I just bought mine, and seem to be hitting 70-80 and sometimes 90c degrees upon windows loadup, and then it begins to idle around 65-70c. Is this normal? it seems higher than I would be comfortable with

[@BrotherLead]

@@WestDropHow are you going with it now mate? My idle temp is around 37-40 degrees max at idle

[@WestDrop]

@@BrotherLead turned out my CPU Cooler Liquid AIO was to blame. i idle around the same, 37-40c. playing fortnite i get around 45-50c

[@redtiger128]

A explanation of what you did and why is needed as we want to learn why these changes improve performance.😮

[@Mateo_FPS]

I'll do one in the future

[@genergia]

Each CPU has its own CO curve. Your settings may work for you and not for another CPUw.

[@Mateo_FPS]

Exactly this is a starting point it's up to the person to fine tune it to their pc

[@steam9396]

just followed advanced settings and gained 30fps on warzone benchmarks. wow, didn’t expect that

[@roguegaming9071]

I think this video would have been great if there was a before and after benchmarking to compare if any real improvements were made.

[@Mateo_FPS]

I did think about it but I figured people just want to plug in and be done, I will probably make a video comparison soon

[@BurakEnez]

After changing DRAM Timing Control settings, If you are having lots of BSOD problems while booting, just leave them all auto. All of my problems solved. For a few FPS increase, it is not worth it.

[@richardelliot4372]

Hey Buddy Came across your video I've just recently bought: 7800x3D Strix B650-A Gaming mobo 6200mhz DDR5 32GB h150i Elite A couple of people have told me there is a few things you can do to this processor to make it run faster / cooler... is this video something I should follow with my build? Cheers

[@Mateo_FPS]

Go to my other video, I have the b650 as well

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=nnfp6o2lkJo6ZaaG

[@FranquiBIT]

Hello, What configuration do you recommend for the following settings: - ASUS ROG CROSSHAIR X670E HERO (BIOS 1709) - Corsair Vengeance RGB DDR5 6000MHz PC5-48000 32GB 2x16GB CL30 Memoria Dual AMD EXPO e Intel XMP (P/N: CMH32GX5M2B6000Z30K) - AMD Ryzen 7 7800X3D 4.2 GHz/5 GHz

[@Mateo_FPS]

@FranquiBIT follow my other video in the pinned comment, I used the same settings for all my 7000 series cpus, the only thing that may change is the curve optimizer

[@FranquiBIT]

@@Mateo_FPS The only problem I currently experience is that when restarting it gets stuck because of the RAM and I don't know how to solve this, I only know that by removing the profile and lowering the frequencies but otherwise it works correctly.

[@storm9269]

What DRAM timing is need for Corsair DOMINATOR RGB 5600 MHZ 🤔 ???

[@Mateo_FPS]

I would just use the ram profile it comes with if it offers it, the factory profiles are usually good and even if you were to do specific timings you barely get any performance gains compared to the profile from the manufacturer, but if you really want to do specific timings I recommend going to [buildzoid youtube channel] he has tested and has the timings for various ram speeds

[@storm9269]

My Mouse is lagging on Bios Menu, not smooth. I have the Corsair Dark Pro SE 🤔 what can i do ?

[@Mateo_FPS]

The only thing I can think of first is download revo Uninstaller and uninstall the mouse software, and then reinstall it, if that doesn't work , save your bios settings to a profile and then reset bios to defaults to see if the issue continues

[@SgtWazowski]

I used these settings with a 7800x3d x670 crosshair hero 2x16 6000mhz cl30 gskill trident z and it worked perfectly for a while then started randomly restarting my computer. Do you have any suggestions to stop it from restarting?

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=zahz3r2qYjHSiWal Watch the first 3:30 minutes and try those settings, see if that helps

[@echiinoma]

Just did it all, on my rog strix x670e-e 7950x3d & 4090, did not see any fps gain in dyling 2 but will try some more benchmarks. Thanks for the tutorial either way :) will give back feedback

[@Mateo_FPS]

Is dyling 2 a game? Or benchmark program? Check if your 4090 is bottleneck, you might need to use dlss3 to even get close to the cpu, watch my mw3 video 7950x3d vs i9 14900k, and you can see the 4090 and 7900xtx aren't good enough

[@echiinoma]

@@Mateo_FPS Had an answer but seems like i was to tired to press reply, Dying light 2 is a game were I benchmark my fps as well as cyberpunk and other games. at the 10 day mark with no crashes, I modified to -30 on first 7 cores, and still as stable. Smt on auto gives me better performance still having some lag spikes on my main game (black desert online) wich i can not figure out why since my gpu (in all benchmarks & main game) run at 100% so no bottleneck. Will keep updating :)

[@eagiedynamics1779]

Should I set the CPU load line for the 7800X3D or just let it auto?

[@Mateo_FPS]

Just leave it on auto, if your pc crashes every now and then , try setting it somewhere in the middle of your levels, mine has 8/set 4, my other comp has 5/set 3, etc....

[@eagiedynamics1779]

@@Mateo_FPS Thank you for your answer! I have another question,in the video you suggested choosing cache in the CPPC option for the 7800X3D, but all the core of the 7800X3D has 3d-vcache. What is the point of choosing this option? Can I choose frequency in CPPC? My understanding is to choose frequency so the system prioritize to use the cores with higher frequencies. Is this correct?

[@Mateo_FPS]

@eagiedynamics1779 for the 7800x3d I saw no difference in cppc cache or frequency, so either one you will be good, do keep in mind in frequency theirs a chance it can assign a lot of tasks to your best cores and might create some stutters

[@GamesSniper-]

I have the same motherboard. Is this procedure to lower the temperature of the 77800 x3d processor?

[@Mateo_FPS]

It will lower your Temps and boost higher

[@jwar2163]

I have the X670E Crosshair Extreme will these setting work on the mb? Also can you explain why these settings are necessary? Also what is the app or program that you are using at the 10:35 time mark for setting up the 7950X3D ? My build is as follows X670E Crosshair Extreme , 7950X3D, Strix RTX 4090 OC, Asus Thor P2 1200 PSU, Corsair Dominator 64GB 6000mhz ddr5

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=MO6mNODWPbc13xcJ Follow this video instead It's too much info for a message on what everything is and what they do, If you are really interested in knowing what each thing does, take your time and researching each one I didn't make a video explaining everything because this video is already long enough and people don't even bother watching the whole video

[@chrispittmanComputing]

Try running FCLK 2033 and UCLK=MEMCLK (1 to 1 at 6000 MHZ) VSOC 1.30 timings 30,39,39,28,68,48,496,384,384. Run your 7800X3D settings all stock except a negative all core -30 curve optimizer.

[@Mateo_FPS]

I'll try this out later on

[@geekBengal]

this is not stable with my 6200mhz m-die and only -20 curve

[@chrispittmanComputing]

@@geekBengal The timings are for an A-die kit 6000 CL30

[@geekBengal]

@@chrispittmanComputing sure, do you have timing for this kit: CMK32GX5M2B6200C36

[@chrispittmanComputing]

@@geekBengal kzbin.info/www/bejne/aoiWomOPr8-Erdk

[@Andriej69]

I just wanted to find where PCIE ASPM Mode Control was, so many thx!

[@lesterbalboa5137]

noob question.. will this settings work with my setup? CPU: Ryzen 9 7900 (non-X) Motherboard: Asus Strix X670E-F RAM: 64gb 6000MHz

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=UcF6zlDeJrFUNcqL Follow this video should work on all 7000 series cpus, just make sure you are only using 2 ram sticks

[@lesterbalboa5137]

@@Mateo_FPS worked and stable so far, thanks!

[@ezlife1518]

ASUS STRIX X670E-A Gaming, What configuration do you recommend with 7800x3d?

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=3RoIexFjebN07GjB Follow this video

[@Pwnooqraphy]

I have the ROG STRIX X670E-F GAMING WIFI, AMD Ryzen 7800x3d and Corsair VENGEANCE RGB DDR5 RAM 32GB (2x16GB) 6000MHz CL30 AMD (CMH32GX5M2B6000Z30K). Can i use the same Bios settings like you? Nice Video btw!

[@Mateo_FPS]

@Pwnooqraphy yeah! But follow my other video instead the one on the pinned comment

[@Pwnooqraphy]

@@Mateo_FPS very thank you, and i cant damage my Hardware with it?^^ Im just scared about BIOS settings haha

[@Mateo_FPS]

@Pwnooqraphy as long as you dont mess with the voltage you should be good, the worst thing that can happen is it wont boot up, but its easy to reset your bios and be back to normal, so before you start read my pinned comment and make sure you understand how to reset bios before you begin, any questions or concerns let me know, ill try to help the best i can

[@Pwnooqraphy]

Bery very thank you!!! You have my Sub

[@Pwnooqraphy]

​@@Mateo_FPS so i should dont use the DRAM Timing Controls from this Video?^^

[@andypierce4455]

Hey man I am optimizing my 7800X3D on Asus ROG STRIX X670E-F. I have already achieved impressive results such as 19478 cb23 score, I want to push it further and to do that I need more information on LLC 6,7,8, I see in this video you are using LLC 8. Have you noticed an increase or decrease in Soc voltage under load and if so how much? Thanks btw :)

[@Mateo_FPS]

I can't tell you much since I don't optimize for benchmark scores, I only do so for gaming, and for gaming llc8 and auto their was no difference in performance

[@mevlutdogru489]

Can you share the settings where you got 19478 points?

[@andypierce4455]

@@mevlutdogru489 eCLK 103 -10 curve optimizer

[@JayD33p]

At 5.24m you mention "Load x3D core flex gaming preset if you have the 7950x3D" I have the 7800x3D so i take it i not only dont press the load preset option but i also dont change anything else on this page, ie Algorithm, Algorithm Condition level etc etc..?

[@Mateo_FPS]

Correct, for the 7800x3d you don't need to do anything on that page

[@parsa4528]

Should USB Audio Controller be on if I am using a usb DAC to connect my headphones into the system? or just using any usb audio peripherals in general, like a mic

[@Mateo_FPS]

Depends where you connected your Dac if it's to the back of your pc/motherboard you can turn it off, this will shut down the other usb ports like front of pc

[@parsa4528]

@@Mateo_FPS interesting, i assumed that usb audio controller was for handling and improving audio protocols over USB? had no idea that it was relating to front vs back usb ports

[@Mateo_FPS]

@parsa4528 my bad I read your comment wrong, yes leave it on, I stopped using my Dac and mic so I turned it off

[@parsa4528]

@@Mateo_FPS appreciate it man, and thank you for making this full bios guide, crazy that you were able to compete with FC's max OC system! if i'm also using 7950x3d, x670e hero, and a 6000 cl30 g skill kit, it should be safe to mostly plug and play these settings right? seems like you've done a pretty good OC and optimization without pushing things fully to the limit (-30 CO for example)

[@Mateo_FPS]

@parsa4528 these bios settings will get you to about the same fps as FC I will make an update video on bio settings and how I got it to over 500 fps in cod mw3, these bios settings are a safe plug in and your done settings , these settings I used on my 7950x3d and 7800x3d

[@projectorskiproject2117]

Hi. One stupid question: Can I apply some of this settings for my 7950X ?

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=UHvKDiIAroUS4WRJ Follow this video instead and it's not a stupid question, this is good for all 7000 series cpu, I have 7950x3d, 7950x, 7800x3d, all same settings except the -30 pbo, that is the only thing that varies

[@orhantahan181]

Hello. In many forums it is said that mcr should be in 'enable' position. What advantages does it provide when we 'disable' it? And even though I set mcr, the bios boots very slowly compared to my old Intel system. Are there any additional methods to shorten boot time? Thank you also for the video.

[@Mateo_FPS]

When you disable it, it makes sure your your pc does a full memory training insuring stability but makes boot time slower, if you enable memory context restore it will speed up boot times but may cause instability because it assumes everything is fine from the previous memory training , if you enable it and have no issues then great but if you start having issues turn it off, physically time it with enable and disable to compare results, it's suppose to speed up boot time, as far as booting up faster, make sure you have fast boot on and check your post delay time, by default its 3 seconds, you can reduce it, but keep in mind this will reduce the time it let's you load into bios,

[@Appplee213]

I had a good Black Friday deal on this MOBO but it have alot of negative reviews, it’s still on the way guys should I cancel the order ?

[@Mateo_FPS]

I had it for a year, never had a problem with it, a bit overpriced, I got the aorus 670e for 250 and got same performance

[@echiinoma]

I love the rig, overpriced for sure but top notch (diff: 4090)

[@sintreek]

I have x670e hero paired with rtx 4090 & ryzen 9 7950x3d. I did all these steps and my pc keeps trying to restart and says diagnosing pc and repairing disk 😢. “Your device ran into a problem blue screen” help me 😅

[@Mateo_FPS]

Reset bios, by removing cmos battery or the mobo should have a button to reset bios, Follow this video instead and don't turn sata off kzbin.info/www/bejne/oaKkpIF4at12jKssi=J6O74P3POkdpJOTS

[@sintreek]

Okay. I reset the bios from the back button. Will do, thank you.

[@IIExhibitAII]

So if u have the 7800x3d u can’t load x3d core flex gaming preset? I’m confused with that part.. thanks

[@Mateo_FPS]

It's not going to do anything, because that option is for cpus with 2 ccds, 7950x3d has "2 chips" cores 0-7 is ccd0 and cores 8-15 ccd1, what the flex profile does its suppose to assign apps fo the chip that's better suited for it, 7800x3d is basically ccd0 cores 0-7

[@marktharpe8653]

Coming from a beelink series5 5560u with an rt5700 to building my first pc n with alot of research i bought the asus rog strix b650e-e gaming wifi 7800x3d 64gb ram with an rtx 4060 three 8tb nvme ssd with 850w psu. Still dnt know nothing about benchmarks or the pc medical terminology i just did what u said to do hope i notice a difference also do u think i need a different psu for everything

[@Mateo_FPS]

@marktharpe8653 i would recommend getting a 1000 psu its better to have extra than not enough it can bottleneck your system, how many ram sticks did you put on your pc? What kind of games are you going to play? What monitor refresh rate are you gaming at?

[@marktharpe8653]

@Mateo_FPS I have 4 ram sticks 16gb each 240 refresh 32inch samsung odyssey curve g6

[@marktharpe8653]

@Mateo_FPS not knowing what I was getting myself into I may have over spent I'm just glad I could afford it even if I went to far I even bought a highpoint pcie4.0 thunderbolt case which has the card already installed and another part for an extra gpu. I wanted to put the thunderbolt pcie card directly into a pcie slot n my pc but thts past my expertise n dnt know what to do with it now

[@Mateo_FPS]

@marktharpe8653 in order for you to achieve high speeds on you ram you can only have 2 ram sticks that came in a pair together, if you try to follow the video might it not work for you

[@marktharpe8653]

@@Mateo_FPS all 4 ram sticks r the same brand it's showing all are working once I selected expo 1 n bios before it was saying speed was like 30 sumthing now it reads n the 60's

[@onpatrolforthejuice]

I have the 7800x3d and a gigabyte b650 auroros elite. Do you think this guide would be ok for that? The bios is mostly the same and the settings should mostly be all available

[@Mateo_FPS]

Yes You can also follow this video, I have a gigabyte mobo on my main pc kzbin.info/www/bejne/qnzCYoZ3nsppgtEsi=1L78Pn-H5HO5eQ-O The only thing I suggest is leave asynchronous mode on 100.00 don't change it

[@onpatrolforthejuice]

@@Mateo_FPS I just found it can't wait to try your settings thanks so much

[@Mateo_FPS]

@@onpatrolforthejuice if you have any issues or questions just let me know

[@onpatrolforthejuice]

@@Mateo_FPS hopefully all goes well but if I have trouble I will most certainly hit you up. I really appreciate it that's huge.

[@onpatrolforthejuice]

@@Mateo_FPS so it boots fine. I have been having trouble with my memory though. I got a bundle from Newegg and the RAM it came with is G.skill trident z5 6400 32 39 39 32gb. And the motherboard doesn't seem to support this kind. (Gigabyte b650 auroros elite) The PC is relatively stable when I change the xmp settings to 6000 mhz under (system memory multiplier) in bios but sometimes when I am shutting down I will get an error message about memory and the PC reboots instead like it is crashing. Any clue about this?

[@patrickle1]

Thanks for the step-by-step and sharing your settings. I have a 7800x3d + x670e hero + Trident 6000MT/x RAM. - Latest stock bios I was getting 17567 pts w/ Cinebench R23. - Updated with your settings I'm now getting 18190 w/ Cinebench R23 - Using OCCT I don't see any errors. Do you recommend I keep going and increment to all cores up to -30? Thoughts on doing per core and if there is an advantage to do so? **UPDATE** I went ahead and updated bios with -30. Ran OCCT for 15 min and didn't see any errors. Now get the following: 18347 pts w/ Cinebench R23. **UPDATE 2** - With -35 I'm now getting 18378 w/ Cinebench R23 - I tried -37 and -40 and both are crashing my system. Will need to explore per core which i'll have to do that later. Curious to see what others are getting.

[@Mateo_FPS]

I recommend doing per core,you will see a some performance increase

[@patrickle1]

@@Mateo_FPS thanks for all your help! Any tips on how to best test each core? I'm using OCCT for stress tests. When I ran with - 37 - 40 my pc just rebooted. OCCT didn't tell me which core was bad. Am I missing something? Thx

[@Mateo_FPS]

@patrickle1 open occt Open task manager Go side bar Details Under occt.exe right click Set affinity you are going to select cores 0-15 or 16-31 Go back to occt Cpu option Data set- large, mode-extreme, load type-variable Thread settings- core cycling Type-custom Physical core configuration P0 make sure it has a check mark and cores p1-p7 make sure it has an arrow, cores p8-p15 make sure it has the red circle with the diagnol line across Cycle internal -45 seconds Threads per core -32 Then click start

[@patrickle1]

@@Mateo_FPS thank you so much! Hope to get to it later this weekend

[@vahidghiasvand9087]

Is it best to start high on curve optimizor or start low, and work my way op ? Until its stabile

[@Mateo_FPS]

Either way it's fine

[@vahidghiasvand9087]

Thanks. But Does higher curve setting lower temp and raise performance? Or is it the other way round ? Botj ways aint an answer 😂

[@Mateo_FPS]

@vahidghiasvand9087 lowers temps and boosts to higher frequency, allowing it to maintain a higher frequency longer ( better performance), just don't go past -30

[@beyond3649]

Hey. I have the Asus rog strix x670E-E. Will these setting work on the motherboard or there is a different settings ? My specs are Zotac 4090 oc, G.Skill 48GB 24x2 6400 Hz, 1300 PSU

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=RbVPxabHkisnCPNP Follow this video instead

[@Mateo_FPS]

should work, I've used these settings on 3 different mobo, if you have any issues reach out to me and I'll help you out

[@beyond3649]

will do. thanks though@@Mateo_FPS

[@oguz78558]

Hi man ,i've 7950x3d ,4070ti ,prime-x670-p that ram timings are good for me ? I have 6000mhz frequency

[@Mateo_FPS]

Yeah, try them out

[@makio2477]

Hi, any idea why the GPU fans go on full Speed when i start the pc and stops till windows is booted?

[@Mateo_FPS]

Most likely another app is taking control of the fans or the gpu temp is not hot enough to run at full speed, like mine don't speed up until it hits a certain degree then they go full blast

[@makio2477]

@@Mateo_FPS i mean before the bios starts, when the asus logo pop up the fans stops

[@DVRKLXGHT]

Will this work with 7950x3d asus x670e-e (and what about 4:00 settings) ddr5 6000 G.Skill Trident Z5 Neo RGB 2x32

[@Mateo_FPS]

Yes, and just use the ram profile that comes with it

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=Jib3bLOOHLeaINIP follow this video instead

[@peternagy6656]

What is the difference you measured between preferred cache vs. frequency in FPS and latency? Acc.to AMD's recommended settings, core-parking via game bar and game mode is expected to park CCD1 while gaming. At least one advantage of your settings is it forces all processes to use CCD1, freeing it up CCD0 (cache cores) to fully be dedicated and utilized by games assigned via Process Lasso. I'd be happy to read your experiences. Thank you!

[@Mateo_FPS]

The difference between preffered cache and frequency is not much of performance in terms of fps its more of the processes, so if I set it to cache the cpu with the 3D cores will be handling like 200 processes and I set it to frequency the 3D cores would have less processes when I game, so it "should" reduce Latency and reduce spikes from a random process that uses the same cores, aside from the settings cores 0-7 will get you way more fps than core 8-15

[@Mateo_FPS]

As far as core parking, I'm still looking into because I have noticed if I run a game and I do other things , you can see all cores being used but not to their full potential, so they would sit around 25% usage but if I stop the game ccd1 cores will go to 75 -100% usage an if I close everything else and just game same thing happens, I still need to test for Latency overall I'm still trying to figure out the best way to do it, according to my settings no cores are parked so when I game you can see cc1 cores are still being used

[@peternagy6656]

@@Mateo_FPS Yes, this sounds logical. I play games at 4k with 4090, upgraded (or sidegraded?) from a 7700x to 7950x3d, using core parking, hardly have noticed fps increment. Average of between 5 and 10 fps. I am going to play around with your settings like prefer frequency and rerun my benchmarks. Once I'm done with it I will disable the second (CCD1) to emulate 7800x3d to see those results. Editing and encoding videos around 35% faster as average compared to my overclocked (5.5GHz) 7700x, which is ok, but gaming performance so far hasn't amazed me.

[@Mateo_FPS]

@@peternagy6656 example: 7950x3d can generate up to 500 fps in mw3 but if you game at 4k and the 4090 only generates 200fps you are only going to see 200fps, so even a lower tier cpu like 5900x if it generates 220 fps you will see similar results, but let's say you game at 1080p mw3 with 7950x3d with 4090, you should be able to game like around 400fps

[@Mateo_FPS]

@@peternagy6656 if you have mw2 or mw3, if you run the benchmark and share your numbers I'll be able to know what's going on, you should be getting way more fps

[@aLeb7-]

regarding the ram settings, I have a corsair dominator platinum 2x16 6000mhz cl30-36-36-76 kit. Can I use the same RAM settings as you?

[@Mateo_FPS]

It should work but I recommend you do your oc expo/docp profile first use some type of benchmark check your fps then try these ram settings next to see if you get more/less fps and also stability

[@aLeb7-]

@@Mateo_FPS Thanks for the reply, I have another question. At minute 4:02 you specify, only for rog hero, I have a rog x670E-F, can I still copy those settings?

[@Mateo_FPS]

@aLeb7- yes you can, just make sure you don't select anything in red

[@aLeb7-]

@@Mateo_FPS thank you so much, last question, then I won't bother you anymore. Is it better to enable or disable the Resize Bar on 7950x3d, windows 10?

[@Mateo_FPS]

@aLeb7- depends, what do you care more about, higher fps or higher 1% lows?

[@thomasshelby7487]

Does this mobo have problems with 4 sticks of ram? Asking cus i wanna get the corsair dominator plats 6000mts cl30 4x16

[@Mateo_FPS]

Am5 platform you can only run 2 ram sticks to get the increase speed, if you run 4 sticks it will run at lower speeds, if you are gaming 2 sticks and if your more of productivity then 4 ram for more memory

[@thomasshelby7487]

@@Mateo_FPS ahh, yea i will be gaming mainly, wanted 4 sticks of the whole aesthetic purpose, sadly wont happen

[@Mateo_FPS]

@@thomasshelby7487 I know it sucks lol I wanted to do the same when am5 came out, on am4 you can do it

[@lorenzobossa5408]

Its good for 7900x3d? And asus strix x670e wifi mobo

[@Mateo_FPS]

It should work the same for your cpu cores 0-5 are 3d and 6-11 are regular, the bios settings should work the same, just look up the same names and change the settings, I recently built two pcs with different mobo and it worked fine, incase your mobo doesn't have asynchronous mode or if it crashes when you change it, don't use it and just use pbo -30 all cores, if it crashes reduce it by increments of 3 until it doesn't crash

[@mekurukid2093]

Bekomme mit dieser Einstellung leider immer einen Bluescreen von windows beim hoch fahren 😢

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=1gI10hUKtDnneAHN Folgen Sie stattdessen diesem Video

[@mekurukid2093]

@@Mateo_FPS Vielen Dank hat Funktioniert :)

[@sirdawn4325]

i have asus tuf x670e-plus n 7900x3d gskill 6000mhz cl 30 ram can i use this video settings?

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=O0I_0DBgyP6zijxb Follow this video instead

[@sirdawn4325]

@@Mateo_FPS can i use everysettings on this video thanks

[@Mateo_FPS]

@sirdawn4325 yeah and leave Sata controller on when you get to that point

[@sirdawn4325]

thanks i just want to default settings for trusted computing settings i tried bios default but not working im sure security device support default is enable but disable block sid default enable or disabled?

[@1yungjude]

does it matter if virtualization is turned offor kept on

[@Mateo_FPS]

It's mostly if you use emulators, if you use them leave it on if you don't turn them off

[@MrOsa590]

Pc: -asus rog strix 670 e-e -7800x3d -Corsair dominator titanium -4080 super Cant setup ram on 6000 cl30 when I check on CPUZ still working 4800 cl32 Any thoughts?

[@Mateo_FPS]

What type of ram do you have?

[@MrOsa590]

Corsair dominator titanium 6000mhz cl30 I asked asus what to do bout that and they tell me this ram is not on the list QVL@@Mateo_FPS

[@flgrue]

did you try expo 2 profile? I got a x670e hero with corsair dominator titanium, expo 1 didnt work, but expo 2 did work with 6000mts cl30 (without expo 2 i had 4800mts too)

[@Mateo_FPS]

@@flgrue I was running expo 2

[@christofferjensen9872]

so u would use frequenzy on a 7900x3d, instead of cache i guess?

[@Mateo_FPS]

Yes if you use process lasso to set your games on the 3d cache cores and if you don't want to use process lasso then set to cache

[@christofferjensen9872]

@@Mateo_FPS okay cool. and there are no diffrence in what ever i choose to do performance whise?.. cuz the easy way is just to turn on cache?

[@Mateo_FPS]

@christofferjensen9872 for gaming it's cores 0-5 on the 7900x3D so when you game make sure those cores are only being used or you will probably lose performance if all cores or core 6-11 are active

[@christofferjensen9872]

could another solution be to just go deactivate last last and run 6 core 12 theads? instead of 12/12 and the default 12 24@@Mateo_FPS

[@christofferjensen9872]

or can i just do it through the taskbar and turn off cores 12-23 and leave 0-11 active..@@Mateo_FPS

[@nmnksc]

Asus x670e hero Amd 7950x Gskill trident z5 neo rgb 6000 EXPO Can you do it for 7950x as well? Also, when in bios, it constantly freezes and I have to reset it. It also freezes when I try to change two settings at the same time. I have been dealing with the problem of late startup since the day I built my pc. If I solve it, there will be a stability problem, I think I will eventually go crazy.😕

[@Mateo_FPS]

@nmnksc I did it for my 7950x as well just make sure to follow the video on my pinned comment, as far as the bios goes, try updating them, might solve your problem

[@nmnksc]

@@Mateo_FPS The lower and upper values ​​in the dram timing control are different for me. Updating the bios has now become a nightmare for me. I worked for 5 hours yesterday(again); Windows gave a blue screen error many times, the PC doesnt boot completely, I reset the bios many times. and seriously ddr5 expo continues to drive me crazy. I'm thinking of switching to Intel. All these situations started because the android emulators worked stable on Intel, but constantly lag on my AMD pc. This situation is either related to AMD or the EXPO affiliated with it. And expo rams are still problematic since the day they released. I wish I could show my PC to someone who really understands BIOS and knows how to repair it by heart. Or if he told me that it couldn't be repaired and said; Run away from AMD and EXPO, save yourself!

[@Mateo_FPS]

@nmnksc are you using only 2 ram sticks? Did you reset bios by removing cmos battery? Did you try following my other video in the pinned comments? Are you using an aio cpu cooler? Did you apply enough thermal paste?

[@nmnksc]

​@@Mateo_FPS are you using only 2 ram sticks? YES Did you reset bios by removing cmos battery? NO, I used CLEAR CMOS button Did you try following my other video in the pinned comments? which one? Are you using an aio cpu cooler? YES, LT720 Did you apply enough thermal paste? YES, not less, not too much

[@nmnksc]

I'm leaving it here because maybe knowing the some of parts will be useful for your evaluation; ASUS ROG CROSSHAIR X670E HERO AMD Ryzen9 7950X G.Skill Trident Z5 NEO RGB 2x32 GB 6000mhz F5-6000J3040G32GX2-TZ5NR MSI Gaming GeForce RTX 4090 Liquid X MSI MEG AI1300P Deepcool LT720

[@taps9685]

I've got 6000 MHz RAM but it's CL40, will I still be able to apply these settings?

[@Mateo_FPS]

Yeah, try them out, if it doesn't boot up go back to the original profile, I've done these on cl30 and cl32, just make sure you are only running 2 ram sticks and not 4

[@taps9685]

@@Mateo_FPS will do, thank ya. appreciate it a lot :p

[@taps9685]

@@Mateo_FPS a follow up to using the settings with CL40; I'm running a 7800x3d with an x670e MB and I made sure to follow the guide exactly, I enabled the optional settings in advanced as well and I did have to end up clearing my CMOS cause it wouldn't boot, but thank you regardless, it was a bit of a learning experience for me

[@Mateo_FPS]

@@taps9685 kzbin.info/www/bejne/oaKkpIF4at12jKssi=1YsTPVEcS0FMgb4he Follow this video instead

[@taps9685]

@@Mateo_FPS I wanted to thank you for helping, I got a little sidetracked by other troubleshooting I had to do. But the fix worked wonderfully, I appreciate it a lot!!

[@lethalno1]

My pc boots slower after these setting is that right?

[@Mateo_FPS]

Yes, but if you care more about speed than stability then set memory context restore to enable

[@kibayaiba3893]

Is this configuration can work with my PC For overclocking ?. Because when I try to unlock the DOCP, it seems to not working properly. And I try to find a way to overclock my PC. And I really need help, please. i will put my spec down below DDR5 32 X 4 corsair dominator platium rgb (128GB) ryzen 9 7950x3d TUF GAMING X670E-PLUS WIFI

[@Mateo_FPS]

@kibayaiba3893 your problem is you are running 4 ram sticks, you can only use 2 for oc, please read my pinned comment

[@kibayaiba3893]

I know my motherboard is a dual channel but do you have any idea how can I make this working properly to have 6000 MHz? I brought this PC not for gaming, but for professional usage, i’m a Japanese animator in my company created a software who can only work with 6000 MHz. And I really need help.

[@kibayaiba3893]

I started with only two RAM when I got the PC and then I decided to buy more ram for this PC after that I try to unlock the DOCP it doesn’t seem to function properly, and I don’t know why

[@Mateo_FPS]

@kibayaiba3893 look for your motherboard manual and look for your 2 main ram slots, then install only the 2 ram sticks that came together (same box) with the rated 6000mhz, and then follow my video in my pinned comment, not this video

[@Mateo_FPS]

@@kibayaiba3893 pc specs?

[@AndrewBonn]

Bluescreened right when windows loaded

[@Mateo_FPS]

What's your pc specs? Did you check out my pinned comment

[@AndrewBonn]

@@Mateo_FPS 7950 X3d, Asus Crosshair x670E Hero, Corsair Vengeance 6000Mhz 64GB. I reset the bios back to the previous settings and it booted fine. I'll try again with your settings and this time not do the "Optional" settings. I'll keep you posted.

[@Mateo_FPS]

@@AndrewBonn ok 👍

[@Mateo_FPS]

@AndrewBonn 2 ram sticks right?

[@AndrewBonn]

@@Mateo_FPS Yes, two RAM sticks. CMH64GX5M2B6000Z40

[@heroeska8619]

Hello, i m noob:-) tried your settings with the same asus mb 670e hero// 78003dx// 6400 cl32 g.skill trident z5 2x16gb and rx7900… results are that i have in some games peak (after 10-15 minutes) crashes of whole computer. Last bios. Please, do you have some advice for me guys?

[@Mateo_FPS]

The difference is the ram, I was using 6000, turn asynchronous off and pbo -30

[@Mateo_FPS]

I also have another asus bios video follow that one

[@Sensei54.]

does it work with b650 colorful?

[@Mateo_FPS]

It should, just make sure it's the same settings, I did this on an aorus 670x mobo as well

[@maffboss8001]

Hello, I have: ASUS ROG Crosshair X670E Hero AMD Ryzen 9 7950X CORSAIR DOMINATOR TITANIUM RGB DDR5 RAM 32GB, 6000MHz. 4 times so 128GB total 4080 super. Can I use these settings? Greetings

[@Mateo_FPS]

Yes, I used these settings on my 7950x3d 7800x3 and 7950x also in 3 different mobo

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=FsMWmR2k55SXuZ9e Follow this video instead and just remember on your pbo try -30 all core first, and if it crashes then -25 all core and if it crashes again let me know so I can tell you how to do per core pbo

[@maffboss8001]

Yeah I tried this video and it didn’t boot at all, will try the other video

[@maffboss8001]

@@Mateo_FPS I tried both options now but the PC just won’t boot. It goes in save mode, it only seems to work in save mode. Might it be my RAM? Because it doesn’t wanna run on.

[@Mateo_FPS]

@@maffboss8001 did you reset the bios to default? Before you tried the other video?

[@cyres67]

Hallo bei mir steht im Lasso CPU 0-31 ist das schlimm?

[@Mateo_FPS]

Welche CPU hast du?

[@cyres67]

Einen 7950x3D

[@cyres67]

Bios 1807

[@Mateo_FPS]

@cyres67 kzbin.info/www/bejne/oaKkpIF4at12jKssi=_0mUsjxkWQTCjt5p Go to chapter (process lasso)

[@geekBengal]

your settings wont works with faceit/riot anticheat

[@Mateo_FPS]

This has nothing to do with games or anti cheat ,it's all for your cpu performance

[@geekBengal]

@@Mateo_FPS disabling TPM will break all anticheat

[@Mateo_FPS]

@geekBengal it doesn't do that, I have 3 computers running fine, but if you don't like the setting disabled you can leave it on, these settings are a starting point tweak it to your liking and your computer

[@geekBengal]

@@Mateo_FPS secure boot off and you can play faceit ?

[@Mateo_FPS]

@geekBengal if you use specific 3rd party's anti cheat and if this effects you leave it on, I would never play a game that needs a 3rd party anticheat, those programs always lower your cpu performance especially the 1% lows, and people still cheat, to this day their is no good anti cheat

[@petrosvosk]

can you do for 5800x3d asus rog strix b550

[@Mateo_FPS]

kzbin.info/www/bejne/oaKkpIF4at12jKssi=FGh0Zv8uQz8t-r3e This mobo is very similar, check it out and adjust your settings to your hardware

[@34msg38]

Is it the same for crosshair x670 gene ?

[@Mateo_FPS]

Should be, I used the same settings on a gigabyte mobo

[@34msg38]

​@@Mateo_FPS thank you so much from Türkiye 👍

[@iNasteable]

@@Mateo_FPS can u set core flex on Asrock X670E Taichi? can't seem to find it. Its super usefull on Asus Motherboards. Btw did you find core flex on gigabyte?

[@Mateo_FPS]

@iNasteable do you have a 7950x3d or 7900x3d? If not then that setting is useless and their is a way around it if you mobo doesn't support use process lasso

[@Mateo_FPS]

@@iNasteable kzbin.info/www/bejne/oaKkpIF4at12jKssi=tZu_4MuwXI-fUZhR