Blo Air-GT Car Air Dryer Review | Blackbeard's Detailing

[@dtm979]

I’ve had one of these for several months now, the noise from the panel gaps was the first and only negative commented on, simple fix, ear defenders. Awesome video.

[@shashankmaheshwari5444]

Best review on this I have watched. Great work! Convinced me to pull the trigger on this dryer :)

[@BlackbeardsDetailing]

Thanks for the good feedback, I've certainly been impressed by it and can't fault it 👍

[@Dave-wm2xg]

Great review. I have had this particular blower for last 12 months, no issues have shown since. Worked flawlessly. It's nice and warm in the winter aswell 😃 Subscribed 👍

[@Class1Adventures]

I've just ordered the smaller version. Great review. Just what I was looking for. Thanks.

[@Zixzi104]

How did you wall mount it? 😊

[@highgrade199]

Just got the Blo Ait-GT on your review, keep it up mate.

[@BlackbeardsDetailing]

Thanks 👍

[@henriwhiteman1630]

Got the same, great dryer wall mounted too

[@richardwells4370]

Thanks for the demo I am considering buying one of these for my BMW E89 Z4 . As it gets very little use ,It never gets really dirty , I snow foam first ,then shampoo with an Auto glym product , ,my car is not ceramic coated , but still beads very well.this will save the aggro of towel drying , I have two other cars to clean as well. 👍

[@BlackbeardsDetailing]

It's definitely a time saver, thanks for the comment 😁

[@lawrenceyoulden3287]

Really informative video. Just had my car ceramic coated so thinking of buying a dryer for home use when cleaning the car i.e. not a day to day. Is the single motor version dryer up to the job?

[@BlackbeardsDetailing]

If you're car is ceramic coated absolutely, the surface will be nice and slick so water will shoot off 👍

[@Gooddaytosavelives412]

great video! can I just ask how you wall mounted?

[@BlackbeardsDetailing]

Hi Ian, I removed the castor wheels and then bolted it onto the wall with heavy duty rawlplugs. Thanks for the feedback 😁

[@tomsmith2208]

Came to ask this too

[@jaymmm1]

can you show how you wall mounted the blo air dryer on the wall please ?

[@BlackbeardsDetailing]

I removed the wheels and screwed it onto the wall using the existing holes where the they were.

[@adblf]

Really comprehensive review. Been looking at this for a while and not yet pushed the button. I'm currently using a modified a 2800W pet dryer with a longer hose and added some rubber around the top to protect against any inadvertent knocks against the paint. Have you used a pet dryer previously and is this a big step up in terms of power or are you paying for the bells and whistles out of the box?

[@BlackbeardsDetailing]

I haven't used a pet dryer however have been using a Metrovac Vac'n'blo which has a 4hp motor and this is a huge noticeable step up bud.

[@koppen89]

Is that Wall mount included, or have you made it yourself?

[@BlackbeardsDetailing]

I removed the castor wheels and used the existing holes in the plastic base to screw it onto the wall.

[@matthewthompson4199]

Hi there, Just wondering how have you wall mounted yours. Thanks :)

[@BlackbeardsDetailing]

Hi Matthew, I removed the 4 coaster wheels that are secured on with a bolt and then just measured up the holes and used coach screws and concrete plugs to secure them to the wall.

[@matthewthompson4199]

Blackbeard's Detailing , Ahh perfect mate, Im wanting to attach mine to the shed so thats great for me, Thanks for replying to me, i hope to call with you next time I’m in your area. 👍🏼😎🚗

[@BlackbeardsDetailing]

@@matthewthompson4199 it was fairly easy to do, shouldn't have any problems attaching it to your shed 😉

[@matthewthompson4199]

Blackbeard's Detailing Cheers buddy, appreciate your help, there an amazing piece of kit.

[@bmwracing1974]

How many mins did it take to blow the blue car?

[@BlackbeardsDetailing]

Around 15 minutes, half that time for a freshly protected car (or freshly applied drying aid, which wasn't applied for the video comparison). Hope that helps, Ross

[@bmwracing1974]

@@BlackbeardsDetailing thanks for that. Prob takes longer to dry with towel. Good job.

[@BlackbeardsDetailing]

@@bmwracing1974 I've completely removed towel drying from my work, I solely use the blow drier. When a car has been fully decontaminated and chemically stripped of all protection (like BMW Protect, GardX, Supagard) it does take much longer to dry as the water sits in sheets. However the ability to ensure water isn't pooling in all the crevasses that spill out during correction etc is preferred to towel drying. For a non pro user who's car is protected and "beads" in my opinion a blower is a must and I encourage all my customers to invest in one and haven't had a bad report yet. They are expensive compared to towels but the minimal marring risk is worth it 100%

[@bmwracing1974]

@@BlackbeardsDetailing thanks for the info. I’ve just bought a San Marino coloured M4 and I dread running a towel over it. Be water mark trails everywhere so this blower will do the trick.

[@MrNPJM]

Great video! Before I buy it can you help me with whether this would be good for a large 7-series sized car being cleaned outside, that only has wax protection? Worried about water spots from the sun if it doesn’t dry it quick enough.

[@BlackbeardsDetailing]

If you start drying the area that is in direct sunlight first you'll be fine 👍

[@Gooddaytosavelives412]

do you think this blower is strong enough to replace air compressor for interior dust cleaning & polishing pad air blow? 👍 thanks

[@BlackbeardsDetailing]

I don't doubt it's powerful enough but it lacks a small precise directed airflow adapter that's more suited to this and you are unable to turn it on and off quickly like compressed air through a trigger gun. I'd definitely just stick with a compressor for interior dust and pad cleaning.

[@alpharaven290]

Is there good for non ceramic coated cars ?

[@BlackbeardsDetailing]

If you use it alongside a spray drying aid yes it works great.

[@tedmoore7385]

How do you wall mount it mate what fixings do you use ?

[@BlackbeardsDetailing]

4 x Standard Rawl-Plugs and screws bud, the unit isn't too heavy.

[@tedmoore7385]

@@BlackbeardsDetailing thanks mate I have the blower just like what you have done with it 👌👌 good use of space mate

[@MCSTEW05]

What does the filter look like and is it washable?

[@BlackbeardsDetailing]

Filter is dense foam, pops out really easily and I use an air line on a compressor to blow it clean.

[@p8rdm]

Is that a BLO wall bracket?

[@BlackbeardsDetailing]

No I removed the roller wheels and bolted it to the wall using the same holes bud.

[@williamknifeman7330]

I would probably just drying towel the glass to save time.

[@xTheFMx]

Have you had any issues where you use it for like 20 mins and it just turns off and downt turn back on😅

[@BlackbeardsDetailing]

Nothing like that fortunately, is it maybe overheating?

[@xTheFMx]

@@BlackbeardsDetailing no just tried it again after a couple hours and still won't turn on :(

[@BlackbeardsDetailing]

@@xTheFMx not good news bud, try giving BLO an email and hopefully they sort you out. If you can let me know what they say/do so anyone else watching the review can see their response that'd be appreciated.

[@xTheFMx]

Just popped to the shop and bought some plug fuses and its sorted my issue maybe had a dud fuse from factory :) plug fuse is very easy to access perhaps they made it easy access for a reason other than that im loving it :)

[@BlackbeardsDetailing]

@@xTheFMx that's great it was a quick and cheap repair, hopefully you don't have any more issues 😀