Blackmagic Pyxis 6K - The Box Camera We Have Been Waiting For!

[@madhousedmi6047]

This Pyxis is just the beginning for a powerful setup for the money I’m on board let’s go BM🎥🎬

[@AllTheBeef]

Another thing hardly anyone mentions is davinci's rolling shutter tool using the camera's gyroscope data. It fixes any jello effect and I swear it doesn't even crop in. It's magical.

[@mmlewis1030]

Yes. I get annoyed when reviewers don’t even have the most basic knowledge of DaVinci Resolve’s tools.

[@bocusfocus9714]

Yes, but you have to sacrifice your shutter angle for it to work. Won’t do the job with a 180-degree shutter. Cool tool but that really limits it.

[@jammaschan]

@@bocusfocus9714 kinda, but sometimes it still works even if you have a 180 degree shutter as long as it's not overly exaggerated movement

[@earnieboy54]

I was annoyed by the wait at first but the small tweaks they made that separate it from being a rehoused Bmcc 6K, were well worth it. Mine arrives tomorrow (10/11) and I can’t wait to film with it!

[@carlyates2487]

Hope you enjoy using it!

[@qvisionmedia7195]

Not sure if you seen the side by side footage. Because the footage looks exactly the same. Nothing was tweaked as far as image quality.

[@earnieboy54]

@@qvisionmedia7195 tweaks: sensor readout and impact on rolling shutter, added support for anamorphic settings using open gate versus having some split between open gate and 6K 17:9 modes (or 4K). There was another tweak but I can’t remember. I understand that you are probably focused on image quality but I never mentioned anything about the image in my initial comment. You can research these things if you want. Also there may be other available firmware updates to expand on the sensors performance so time will tell.

[@earnieboy54]

@@carlyates2487 thank you so much! Very kind of you!

[@NealNot]

New updates have been released that made it look sifter and more like a legitimate cinema camera, even more than the BMPCC 6K Full Frame one.@@qvisionmedia7195

[@OfTwoLands]

Solid review guys, such a great cam! Loving it so far ☺️

[@carlyates2487]

Thanks! Been loving your content too, some amazing footage. Great work.

[@OfTwoLands]

@@carlyates2487 thank you mate 🙏

[@fede9520]

22 minute banger from ProAV, cheers guys.

[@carlyates2487]

Glad it was helpful, thanks for watching!

[@wallenboeckfilms]

Great video! Im loving my Pyxis so far, its my first Blackmagic camera. The image quality is indeed fantastic and the best i have worked with so far. Really looking forward to film future projects with it. Greetings!

[@carlyates2487]

Fantastic, glad to here you are impressed with it. Thanks for watching

[@loudandclearmedia]

Great video, Carl. It sure feels like Blackmagic is one solid AF system away from world domination!

[@carlyates2487]

I would love to see a full autofocus system from Blackmagic.

[@Pana_DoP]

Very good overview! I would like to see a super35 version of this. I know that it´s possible to switch to s35 mode but I would rather like a native s35 sensor in 6K.

[@carlyates2487]

Absolutely. I would love to see them use the S35 12K RGBW sensor from the the URSA Mini Pro 12K OLPF. That sensor in a pyxis form factor would be just fantastic.

[@KONDORBLUE]

Great review per usual Carl! The Pyxis is an incredible camera; it will be fun to see how it is used worldwide. As a heads up, you can swap the rosette on our Wing Side Handle via a 3/16" hex tool. That will make it more comfortable when used on the right side of the camera :)

[@davidvchrn520]

What an awesome camera ! Can't wait to get my hands on one ! Also I can't wait to see what BM will do in the future with this plateform ! Maybe a in house 6K RGBW sensor ? E-ND? They've got a great base to build onto !

[@carlyates2487]

E-ND would make a lot of people very happy!

[@JonasStuart]

I'm going to get one as soon as I have budget. Perfect a-cam to my P4K. A G2 with an inhouse sensor would be my perfect camera - no windowing, faster sensor read-out for higher frame rates and less shutter lag and an even better image (like the cine 12K but less pixels)... Love your minimal set-up here too! So clean!

[@Sam-higgins]

Great vid team!! I love the iris & AF button especially in their placement…..the iris now auto-Iris for exposure so inside to outside shots are easy & the AF is awesome especially with L mount lenses. Rolling shutter hasn’t been an issue on several paid gigs now especially if you aren’t willing it around like your having a fit 😂 Keep rocking it guys 😎

[@carlyates2487]

Ok great! Good to hear from a customer who likes having those buttons!

[@Sam-higgins]

@@carlyates2487 had a little reflect on it & you are right too! It would also be good if they were programmable for everyone not using the current function. Was literally shooting a vid on auto iris & AF with Pyxis last night but I get probably for the majority of non broadcast/ENG shooters auto-iris is not a well used feature. Always up for more custom buttons!! Great vid as always dude, thanks for keeping it more real than sales, appreciate your candour.

[@nlimax]

love your channel and i ordered pyxis ❤️❤️❤️

[@carlyates2487]

Excellent, thanks for watching!

[@verebellus]

on the topic of rolling shutter, it is very usable on its own, and it can be massively improved with stablizing

[@Ryan-Payne]

Hey Carl, first off, fantastic overview of the pyxis! Secondly, to address your question, Id like to see black magic come out with a full frame global shutter sensor pyxis variant and i think as you mentioned a 3:2 sensor read out would be important to maintain. Working within the engineering confines of this current body I think expanding the pyxis line up for different use sensors is the most logical step that would look to compete with the Red Komodo line at a cheaper price point.

[@carlyates2487]

Agreed. I'd rather see one of their very fast RGBW sensors though personally. As the URSA cine is nearly as fast as a global shutter, but can do FAR more frame rates and has exceptional dynamic range.

[@jvburnes]

Great comprehensive review. I'd also like to see some coverage of video resolutions. I was thinking of using the GH7 for some indie 2x anamorphic work, but open gate 4:3 video on the GH7 is limited to 4:2:0 and it can't be output to HDMI without downscaling to 4k. Pyxis looks like the camera I should be looking at. I have a 1.5x Bolex anamorphic which should work with a small corrective crop in the Pyxis open gate to achieve cinemascope or just use the Pyxis anamoprhic 5k mode which uses a 6:5 crop to yield to cinemascope using 2x squeeze lenses. It's only a little more expensive than the GH7.... well at least it's in the same ballpark even when adding the display. You also get a much more riggable setup. It's also not so expensive that you couldn't buy it for your personal projects.

[@jvburnes]

BTW, the Pyxis also saves me several hundred $ since I don't need a speedbooster.

[@mark12345697]

Two things stood out to me. First, the dynamic range tests from Cined are quite purist, as they don’t apply noise reduction to enhance the shadows. This means you can likely extract more dynamic range from the camera, depending on the sealing. Second, regarding rolling shutter, I think using gyro data could be a good workaround, though I’m not sure how much motion smoothing it would provide.

[@carlyates2487]

Absolutely, you find cameras like the A7 IV which do incredibly well on their tests because of the aggressive NR implementation. While the Blackmagic cameras have no NR applied at all. Yes, there is that tool in resolve could help in some situations.

[@SimonStec]

Have you had any SDI issues with the cameras? My SDI port has blown mid battery. Will this just be bad luck or have you heard of any similar issues with other models?

[@JoshuaConnely]

What Kondor Blue cages are compatible for Pyxis?

[@johnmilner0859]

I think it's a great camera. Good video.

[@8KHDRVideoBySittipong]

Love the camera from Blackmagic Design too. Waiting to test it here in Bangkok.

[@carlyates2487]

Thanks for watching!

[@Miniaminism]

I can't wait to see "affordable" options for cages. As the two US based manifactured are proposing solution for more than 1200$. MID49 charging 200 for two XLR ports, two cables and a screw is crazy.

[@christopherduran9926]

XCLS is your friend here!

[@cinnabun1046]

You could go and make one yourself. Xlr ports, cabling and a screw isn’t hard to find.

[@carlyates2487]

Yes Mid49 are a fairly high end option. Tilta and Smallrig will have options I’m sure.

[@Miniaminism]

@@carlyates2487 I’m pretty sure as well. But high end or not, charging this much for basic analog cable is straight up milking people. Mini jack to xlr and mini xlr to xlr… That’s nuts.

[@Miniaminism]

@@christopherduran9926 Way to heavy

[@verebellus]

13:25 now this is without noise reduction, which the other cameras often do in camera. and id ray that BRAW has some of the most potential for cleanup of any other codec, as it is so flexible and works so well with Davinci resolve. I also think that for the price, the Pyxis is unbeatable. It is a Large format, compact box style camera with internal raw and perfect riggability. The only true competition i see is the Komodo (which is super35 and more expensive), the V Raptor (which is vistavision and way more expensive) and a few of the ZCams, which are either more expensive, or cant do internal raw to the same quality as the pyxis. I think the only other camera that comes close is Nikon Z6iii and the Panasonic S5ii(and s5iix) and those are not boxy, cant rig as simply as the pyxis and dont have the incredible menu system that blackmagic has nailed. I went from a 6k Pro to the S5IIx, and i really miss the simple and intuitive menu of Black magic, more so than i feel like the autofocus is helping me

[@robertdouble559]

from your list, s5iix is the best bang for buck, great cam. You can record B Raw from s5iix using a BM vid assist 12g

[@verebellus]

@@robertdouble559 which costs more money, youd also need npf970 batteries and a charger as well

[@verebellus]

@@robertdouble559 which is a clunky monitor without ccamera control

[@carlyates2487]

You are right, the value proposition on the Pyxis is fantastic

[@GabrielScindian]

They should use the URSA senso in a Pyxis body

[@sanluca-eva]

exactly, they can do a real "Ursa Mini" with this body

[@carlyates2487]

That would be fantastic. Both the Ursa mini pro 4.6K G2 and the 12K OLPF sensors could work really well in a Pyxis body! I’d love to see that

[@phrasalsyntax]

Because of extra cooling and high processing hardware that the new RGBW Cine 12K sensor demands, the Pyxis would become same size as Cine 12K. However, after you rig the Pyxis for proper cinema work, their relative sizes don't differ too much (less than 1 kg in weight).

[@mmlewis1030]

@@phrasalsyntaxThere is nothing stopping BM from limiting the sensor to 8K, 4K and 1080. At this point if BM don’t bring those sensors then the Pyxis line will fall behind competitors too much.

[@phrasalsyntax]

@@mmlewis1030 Even if you limit the recordings of the sensor to 8K, 4K those are downsampled from 12K (that's why those 8K, 4K have the full with of the sensor). And the cooling and hardware power required to process 12K needs space, that's the reason of the size of BM Cine 12K. On the other hand, you said that “if BM don’t bring those sensors then the Pyxis line will fall behind competitors too much.” I consider the Pyxis sensor better in IQ than any of the competitors (Sony FX3, FX6, Canon C80, RED Komodo OG…) under sub $8K. It’s not better in terms of read-out speed and AF capabilities, but in terms of IQ it’s an impressive sensor in 2024 and for some years to come.

[@scottievee330]

Always a superb, informative review. What was the camera that filmed this?

[@carlyates2487]

Glad it was helpful. We use the Canon C70 as our production camera

[@trenillo]

I would love for them to put the ND filters on this, like the 6K Pro have.

[@Artfulscience1]

Hey I just got mine and setting it up now. Loving it but is your fan buzzing really loud? It’s a very audible colicky sound coming out of the top and it’s pretty warm, is this concerning?

[@carlyates2487]

Did you buy it from us? If so we can take a look for you and compare it to our one here. There is a fan inside, its not a completely silent camera unfortunately.

[@STEFANvDIEST]

Received the Pyxis yesterday. Quick question. The side screen shows quite a lot of banding on my unit. I kinda assume this is because it’s just not a very good screen (and will never use it for anything other than menu/settings), but it is very noticeable. Viewing angle also very very bad. Is your experience the same perhaps?

[@carlyates2487]

Yes it is. I think they have gone for quite a simple screen to keep power consumption down. The banding doesn't bother me to much, as like I said, I wouldn't recommend it for monitoring anyway. But the viewing angles were definitely noticeable when filming.

[@STEFANvDIEST]

@@carlyates2487 Thought so too. It doesnt bother me but wanted to double check since I have received faulty BM units before unfortunately. But for now all seems good then. Thnx for the reply!

[@adeeperbluegreen]

Wait, I am jealous! Where did you get that Pyxis monitor? My Pyxis didn't come with the monitor! B&H Photo says its still on backorder!

[@carlyates2487]

It's an early prototype which Blackmagic kindly lent us for this video.

[@adriancluskey3640]

Awesome review!! Can I please ask you to put a link up to the android app.

[@LoverOfTech]

The price point is the biggest win here. Great work with this video 🎉

[@carlyates2487]

Absolutely, it’s such good value for money. Thanks!

[@krishnansrinivasan830]

Awesome & Thanks :)

[@carlyates2487]

Thanks for watching

[@Bennyblackfilms]

Waiting on your review of the ursa cine 12k

[@carlyates2487]

Its in the works!

[@piotrszubryt1510]

Welcome Arri Micro

[@mikolajjordan]

How is the battery life with the Pyxis Monitor connected?

[@phrasalsyntax]

BM should offer the option to urn off the fixed side monitor when you are using the new external Pyxis monitor. This will certainly save some battery life.

[@carlyates2487]

@@phrasalsyntax Agreed, that would be a useful option.

[@Burritosarebetterthantacos]

The ND made the bmpro awesome. This is two steps forward one step back.

[@ODHunte]

*Nah, I have both PYXIS & 6K PRO( PL) . I have the mofage poco PL-L VND and I don’t miss the internal NDS. It’s many steps forward..*

[@PeacefulMoments1844]

Nice! What camera was used to film this?

[@carlyates2487]

We use the Canon C70 as our production camera on this channel

[@Makta972]

​@@carlyates2487 Better image quality than this rehoused bm6k

[@SimonStec]

Do you know when the monitor is shipping?

[@carlyates2487]

Its still a few months away I believe. Hopefully November or December

[@DynamicLearning4u]

When you say 'decent' dynamic range... 11:13, it kind of make us think that there are hidden meaning within. haha

[@carlyates2487]

For context, we are also testing the new URSA Cine at the moment, which has pretty incredible dynamic range. The dynamic range on the Pyxis is perfectly fine, very much in line with the rest of the industry. The URSA Cine on the other hand is on a different level.

[@Giovanni-Giorgio]

Lovely camera. Just in time before the 2025 mirrorless hybrid cameras come in play. Internal nd filter would be nice though. Autofocus would be nice too, but i get that it is a cinema camera and people will use dji focus pro. Also for anamorphic lenses of course.

[@carlyates2487]

Yes a lot of people use these cameras with manual lenses.

[@markjob6354]

*The Pyxis is a great step forward, and certainly a very useful camera. I would have preferred some contemporary innovation with a new sensor, instead of regurgitating the old sensor technology, which is already used in three different cameras. I would also prefer to have a compressed codec option to shoot with in 6K, such as ProRes HQ 422, or H.265. BRAW is excellent, but it's not as excellent as RedCode RAW 16 Bit codec (Which is a difference your eyes can plainly see), and I don't always need to shoot in a RAW Codec.*

[@carlyates2487]

RED is 16 bit linear while BRaw is 12 bit log, both offer roughly the same amount of colour information once you transfer the linear to log (ie, bring it into resolve)

[@lakerchamps100]

If I’m pulling my focus I need an EVF not a monitor. I was really impressed seeing the monitor announcement but quickly grounded my excitement when I realized I’m old and can’t pull focus on a monitor due to my eyes 😂

[@carlyates2487]

No problem then, they have their URSA Cine EVF and like I discussed in the video, the Kinefinity Eagle EVF also works nicely with it. It's great to have so much EVF choice! Its unfortunately quite rare....

[@verebellus]

I hope someone makes a nice BPU to Vmount adapter with a built in battery for hotswap

[@carlyates2487]

I'm sure people will. The trouble with BPU to Vlock adapters which I have seen before though, is that they end up being very long. Which when you then put a Vlock battery on the back, can be quite a lot of stress on the mount.

[@jeanlucceregermain]

I love proRes

[@CraigMarshall_HDvideo4K]

You can pixel peep as much as you like but without internal NDs, it's a deal breaker. In fact, coming from FS5, FS7 II and FX6, the lack of variable electronic ND, well....

[@carlyates2487]

Internal ND's would be a massive improvement if they were to add them. There are a lot of ways to add ND filters now though, so it is manageable without. Especially for the more controlled work which Blackmagic is well suited for.

[@CraigMarshall_HDvideo4K]

@@carlyates2487 I guess if you're shooting studio or feature work with a large crew, then the lack of internal NDs is less of an issue but IMO, this camera seems very unsuited to single handed doc work, where the 'quality' of internal RAW recording is less attractive even with the novel Box form factor. BMD seem to have always pushed picture quality over ergonomics, right from their very first cameras yet Sony on the other hand, have always struck a successful balance between the two, right back to their very first ENG Betacams.

[@xWood4000]

I'm still waiting for the black magic micro cinema G2 box, which they've said that they aren't making :/ They should have added CFExpress or SD card and a BT chip to the micro studio or still made a separate one

[@xWood4000]

SSD don't have locking USB built in so you need a bulky enclosure

[@carlyates2487]

What appeals to you about the micro cinema camera? The tiny size?

[@xWood4000]

​​​​@@carlyates2487Yeah, mostly the size. Also the price of course. I don't feel like I need anything more if I could control it with a (phone) touchscreen, because I can always add a handle if I wanted more ergonomics. I'm not a pro drone pilot but I think they could also benefit from a relatively large sensor and BRAW in a modern camera. In addition to that because of vibrations and because one shot takes are common mission critically capable CFExpress cards could be needed. Pressing buttons on a camera on a drone is also much more annoying than using an app

[@xWood4000]

​​@@carlyates2487Yes, the size mostly. The price is also attractive. I don't really need anything on the camera except ports if I can manage it via a (phone) touchscreen, and I can always add handles if I need the ergonomics. If I really needed the inertia of a bigger camera I could add lead weights and still keep it small but I don't think I'm doing that. I'm not a pro drone pilot but I think they would really like it, because a lot of them used the first version. Drones have a lot of vibrations and there are often one shot takes so a reliable CFExpress card is required. A relatively large sensor with BRAW is attractive in a tiny camera for them. The Inspires are sort of in that niche but a lot less customizable than something self built

[@p0ggles]

I just want a new sensor and I'll buy it without question.

[@Shaiquille]

this helped clarify so much there's a lot of fluff out there

[@ForestCinema]

This is the “ultimate final form” camera for Sony’s IMX410 sensor. Pyxis, and the S1H from Panasonic, probably present the two best examples of how that sensor can be put to use with a good OLPF in the stack. I’m ready for a new 24X36mm CMOS, with two improvements: readout speed and dynamic range. The latter is more challenging, as it requires either an increasing ADC bit depth, or a dual simultaneous gain architecture, but I’m hoping that will come to mid-level fullframe cameras sooner rather than later. Physically, I’m waiting for a “Pyxis Pro” with two things: internal ND, and a V-Mount/Gold Mount battery option. Larger batteries quickly become necessary anyway when rigging up (the whole point of Pyxis,) so a few LEMO ports for powering monitor/wireless/hot-spot/FIZ motors would be fantastic. If one of those ports could also be run/stop up front, that’d be icing on the cake.

[@ProjectOverseer]

I wonder how this compares with the Canon C80 🤔

[@avx111]

They're about as different as they can get. C80 comes ready to shoot out of the box and has autofocus, great for run and gunning. The Pyxis? Terrible for run and gunning, great for indie filmmaking and small crew commercial work.

[@carlyates2487]

@@avx111Exactly. And the same can be said for FX6. They are designed for different uses.

[@phrasalsyntax]

Canon C 80 is very functional but has a more broadcasting/corporate video 'look'. Pyxis is more filmic 'look'.

[@avx111]

​@@phrasalsyntax I disagree, I think the C80 and Pyxis look about identical in equal conditions. These shots are from anamorphic lenses which makes it look mor filmic. The C80/C400 has other strengths like fast readout speed, 1 extra stop of DR and better low light, which only come into play sometimes.

[@wenjun_n]

I don’t think there was a need for such a big screen on the side of the camera just for settings. It just makes the camera longer than it needs be. The external monitor makes way more sense for monitoring anyways. Even if they said they had reused parts for their pocket camera for that screen, it isn’t even the same quality one that is on the pocket 6k pro lol.

[@carlyates2487]

Its a control panel really, and works very well for navigating their menus. Like I said in the video, their menus are so well designed, i'm glad the camera can get full use of them no matter what monitoring option you are using at the time. Otherwise you would basically be forced into using the Pyxis monitor.

[@iamkubrick]

I would buy three of these as it’s incredible value and quality - but without proress I can’t use it in broadcast 😢 - a lot of people are the same. Not Proress Raw just proress flavours.

[@carlyates2487]

This is exactly what i mean in the video. Blackmagic raw is fantastic, but lots of people are not in control of the workflow and codec choice on their projects. If you do want to use the Pyxis, it is still possible. But you would have to use a Video Assist as your on camera monitor and then use that to record prores.

[@marin_real_estate_photography]

Hi there, Carl: I have the most OCD comment ever. Can you PLEASE rotate the lamp shade in your studio on camera right so that the seam in the lampshade is facing AWAY from the camera? Those seams drive me nuts.Thanks in advance.

[@carlyates2487]

Noted! I’ll try and remember for the next video 😂 unfortunately it’s the ProAV showroom and so that lamp gets moved all the time!

[@JustinGladden]

I'm still torn between the FX6 and Pyxis. ND and the host of Sony lenses I have already is making it hard for me to pick.

[@carlyates2487]

Whats more important to you? Image quality & easy to rig design or speed & convenience?

[@Miniaminism]

Pyxis is cheaper and have better colors and IQ, the raw codec is both great and restrictive (not well welcomed by all Editors / Productions ). Other than that, everything else is better on FX6. Its a question of 20% better IQ vs Ease of use and well knowned workflow.

[@EastonOliver]

@@Miniaminismand don’t forget. BRAW is coming to the fx6 this year

[@PNWMOTION]

I own the fx6, love it death as it covers all bases, but it depends on your work as well, if you don’t have time to set up lighting and frame your scenes all the time the Bm might give you a hard time. But I haven’t used it yet so I can’t confirm.

[@phrasalsyntax]

If you want your images to have a significant jump in IQ go for the Pyxis. It will also train you better as a cinematographer.

[@brettthemonster]

Needs internal ND and ProRes. Just up the price, lose the goofy side display, and include those features. I would have bought it already if those were an option.

[@carlyates2487]

Agreed. Its still a fantastic camera, but those two things would make it better. On prores, I'd love to see an advanced version of their Pyxis monitor which had the video assist recording built in. Then you could record Prores or H.264 /H.265 on their when needed without adding much extra bulk to the camera.

[@Johnnyyoucantcatch]

Global shutter?

[@carlyates2487]

No I’m afraid not.

[@448FILMS]

17k in the pyxis body would end all rival cameras

[@Laurent_aus_Köln]

Nice box design, but not really new at Blackmagic. The Ursa Mini was not much bigger and similar "boxy" in format factor.

[@carlyates2487]

Believe me, the URSA mini is far bigger when using them practically.

[@NoSuRReNDeR001]

In the US BMD on commercials or proper paid professional sets is not seen as ok. This could be the best camera ever... its still a BMD camera. That stigma is real. These will get used in VFX and such like filming the motion capture etc... but not as A or B cams to Arri Sony or Panavision or Red. Sorry but that is the hard inescapable truth of this brand. I have owned several of their cameras before you go assuming I am throwing blind shade. But if you want a budget sub 10000 dollar camera to GET YOU PAID -Sony Fx6 - Fx3 - Fx30 -Canon C80 C70 C400 Komodo-X - these WILL GET YOU PAID. Save up and get the models that make money and are in demand.

[@carlyates2487]

Admittedly, i'm in the UK rather than the US of course. But I'm not sure thats true? You see the Pocket cameras being used all the time in car rigs, VFX rigs for actor closeups, crash cameras etc. The Pyxis will offer them something similar in a much more riggable formfactor which will be very useful for that kind of work

[@lukeduffield3263]

Yeh, just ignore lack of reliable autofocus. Lovely image though.

[@carlyates2487]

We have spoken many many times on this channel about the lack of AF in Blackmagic cameras. Including our recent live stream interview with Craig Heffernan, their Technical Sales Director for Europe, where he mentioned it was something they are actively looking at developing in the future. And explained that other technical advancements like their BRAW codec and RGBW sensor technology took priority for them in R&D which is why they haven't made any advancements in AF in recent years.

[@ginnodizon6551]

well yeah i know that prores is widely use, but i highly agree on bm raw capabilities, i admire bm move to promote braw! i highly do! hate prores thought. why shoot prores if you can shoot with RAW and intelligent raw.

[@carlyates2487]

Blackmagic raw is definitely better. But unfortunately a lot of people are not in control of their own workflow and ProRes is a client pleaser...

[@jfilmzstudio3470]

First

[@carlyates2487]

Thanks for watching

[@twowheelslife5611]

Two personal very annoying limitations: Unusable second ISO for the low DR and hight noise floor and no uncropped 50p (not to mention the 120/100p).. Again, a pity.

[@timekeepermedia5142]

the lack of lowlight capability for people using this outside a studio setting rules it out for more people than the rolling shutter..

[@wadfasfsdfdsfsf]

doesn't rule it out to the thousands of folks that use same sensor in a bmcc body and are fine!

[@timekeepermedia5142]

@@wadfasfsdfdsfsf literally just sold my BMCC6K. The noise floor is horrendous for a full frame camera in 2024 and the 6k pro is objectively still a better camera in almost every way. It has a great image under the right circumstances though and I hope people enjoy it, it's just not for me.

[@carlyates2487]

@@timekeepermedia5142that’s fair enough. Thanks for watching

[@JamesJacksonFilmz]

I’ve shot with the Cinema Camera 6K after sunset and poorly lit wedding receptions and was able to get great images out of that camera and the Pyxis is the same sensor.

[@BadMantraFilms]

​@@JamesJacksonFilmz Above 1250 iso it's pretty bad

[@sa.t.2507]

Just save up more money and get the C400. They dropped the ball with the Pyxis.

[@carlyates2487]

The C400 is a fantastic camera, and also very good value for money. But its a very different pricepoint still than the Pyxis. The industry needs cameras at different cost levels.

[@aifilmschool]

I donno, the texture of the BM image is still very soap opera vibe. (the footage feels cheap)

[@carlyates2487]

Oh really? You should try the new URSA cine then, the footage from that camera is incredible. We are testing it now for an upcoming video

[@aifilmschool]

@@carlyates2487 possibly. Will give it a try.

[@Slipsch]

The only downside of this camera is the sensor, it’s an A7III sensor, is it a bad sensor? Nope. Just that people want something unique and different sensor instead of one from an older camera. But with that, the price of the Pyxis will increase as well.

[@JedCamara]

People make a big deal out of nothing, the Blackmagic 6K full frame image literally looks nothing like the A73, so who cares if they are using the same technology as a base?

[@carlyates2487]

The footage from the Pyxis looks nothing like the a7 III

[@billyoung9538]

I personally would like them to make a new Micro Cinema Camera that has bluetooth, card media and two USB-C slots with at least one supporting this monitor. The Pyxis, to me, is overkill.

[@khanmimaad]

lmao

[@ignaskarlonas4783]

I think you're a bit late with this review

[@carlyates2487]

The finished production units have been shipping for only 2 weeks. Before that, the models we had seen were so early they couldn't even record.

[@iamkubrick]

I would buy three of these as it’s incredible value and quality - but without proress I can’t use it in broadcast 😢 - a lot of people are the same. Not Proress Raw just proress flavours.

[@carlyates2487]

This is exactly what i mean in the video. Blackmagic raw is fantastic, but lots of people are not in control of the workflow and codec choice on their projects. If you do want to use the Pyxis, it is still possible. But you would have to use a Video Assist as your on camera monitor and then use that to record prores.