blade mcpx tips to make it fly better with less vibration.mp4

blade mcpx tips to make it fly better with less vibration

[@mikegrundvig]

This instantly fixed an intermittent vibration issue I was seeing. It took all of 5 minutes to do and worked great. Thanks much!

[@iloverc]

I had big vibration so I changed the servo and that made a lot more stable but it didn't fix all the way and I followed your instruction and That was it!!! No more vibration!!! Thank you so much!!

[@MatthijsOosterhuis]

Thanks a lot for the tips&tricks on this little beauty!! Really helped me making it fly even better...!! Love this heli... :-))

[@auctionmaestro]

Well done! Have a new MCPX and the vibration (wobble) has been bugging me. This looks like a great fix.

[@nicholascartlidge]

Yes listen to this guy he is spot on.

[@Nykkytta]

Muchas Gracias for tips.

[@sonykroket]

Place half a canopy-grommet on the 2 swashplate-knobs And use compressed air every few flights on the the spindle-axes servo-openings to clean out the black crud caused by the carbon strips on the metal strips next to them inside the servo's Done

[@On-roe]

Hi mate, If I was to start in micro gelid what would you recommend? What does collective pitch mean? Great videos mate....

[@sheilstar12]

do u have to use the whole of the grommets or half all around. nice vid :D

[@chasingwaves11]

Lol hey Ray love all your videos. But I have the same heli been flying it for 6 weeks now and the carbon shafts need to be replaced after so many flights the hole that the head and blades grips get screwed to on the shaft wears out and gets bigger and then causes lots of vibrations I tryed glueing it but it dident 100 % work .. so a good up grade is change the main shaft with a new one or a steel one

[@AardieArt]

awesome heli

[@MrMichael2468]

the one i got came with some little rubber pieces on the servo arms, but then again i didn't have any sloppiness in the swash lol

[@nitrokyosho]

the hole grommet on the alierons and half on the elevator

[@07350zhr]

does yours have more throw on the left aileron? mine does also in the down elevator. is that normal?

[@jimandskittum]

Why a can of peanuts. Can't it be almonds?

[@mssippijim]

Had a hard crash a while back on my mcpx trying to do a loop. Repaired the obvious damage, but now it seems the gear mesh is extremely tight. It is hesitant in starting up due to this. Any ideas?

[@nitrokyosho]

get a eflite blade 120 sr to learn on

[@On-roe]

That's nitro heli!

[@EricMiner]

canopy grommets

[@kevorkian123]

@niplapla Incorrect .. its not

[@stryker595]

Its not that great the landing gear is garbage and the motor should be brushless for $200. Nice video though.

[@nicholascartlidge]

Yes listen to this guy he is spot on.