Bluecast X One (Castable Resin) USER GUIDE - casting a silver Cuban ring

[@alexanderaleksandrovs3538]

"GIMMIE X ONE!" Bluecast X One has been a lifeline for my small business during these tough times. With its incredible quality and affordability, it has helped me create amazing prints and attract new customers. If I win, I'll share the bottles with those in need, helping them grow their businesses too. Thank you, VogMan, for this opportunity!

[@talmeirav3862]

As you already know, you are my inspiration to start jewelry casting. Your guides, detailed KZbin tutorials and videos are the that a lot of people begin with this hobby. GIMMIE X ONE 🎉

[@MagicZant]

gimme X One, your work is amazing, i´ve copied all your methods and tools and now i have a succesfull ring bussines here in Mexico (:

[@anthonyparra9553]

GIMME X ONE, I love your videos. This would help me and my family business as we are bench jewelers and are trying to get with the times.

[@khales571]

i'm new to the hobby and been watching many channels for a while... you are 1st one i actually subscribed. Very honest reviews, informative vids without 30 min of fluff. Big thx for helping me to chose stuff for myself :) oh and GIMME X ONE

[@vogman]

Thanks for the very kind words. You're in the drawer 😁

[@gppl77]

GIMME X ONE :) What I especially like in your videos is that they're simple and straight to the point. In particular this allowed me to get into this casting hobby with quite interesting results:) Keep going!:)

[@vogman]

Many thanks. You're in the drawer 😁

[@vogman]

Hey buddy! Congratulations! Despite confusing me with the name, I think you've one a bottle of Bluecast X One castable resin. Please send me a message via my website vegoilguy.co.uk/contact and I can organise things for you. 😁

[@cptharlock]

GIMMIE X ONE you videos are always great!

[@vogman]

You're in the drawer 😁

[@dadbodthirsttrap]

GIMMIE X ONE Seriously, I have been wax casting and would love to start casting with resin and what better motivation than free resin.

[@Black_Haven]

GIMME X ONE, I'll share it here in Brazil with great pleasure! Obrigado pelos seus vídeos sempre detalhados!!

[@lucky-luke8158]

GIMME X ONE! Thanks to you and some other KZbinrs I started Metal casting!

[@vogman]

Good to hear. You're in the drawer 😁

[@ausfoodgarden]

GIMME X ONE It's winter here in Australia and I've been using one of those seedling heater mats to warm up the resin before adding it to the printer. I do have a heated enclosure for my main printer but it saves a lot of time if the resin goes in warm. I don't have metal casting equipment myself but just joined a Maker Space where they do. So it would be great to have a go. Cheers!

[@whatthedook7993]

I am new to the hobby. This is such a great break down I really do appreciate it. Oh an Gimme X One bebe!!!!!

[@HunterValleyDan]

GIMME X ONE You can really hear it in your voice, just how much you enjoy using this resin. It looks like great casting resin. Great video as always Geoff, keep 'em coming mate! 😁

[@cdeichhorn]

GIMME X ONE. I was so glad you did this video! I’ve been casting jewelry for 43 years and the last few years I’ve been using 3D printed models with Blue cast products. They are incredible. I agree their support is fantastic for a collection of various printing profiles. Thanks again.

[@alfredopantano7482]

GIMMIE X ONE...video super interessante..complimenti..non vedo l'ora di provare la X ONE..grazie super VOG

[@hobbitsatplay9542]

GIMME X ONE. The casting tech has come a looong way!!

[@xxAFROxx99]

GIMME X ONE Im thinking about starting to make jewelry as a hobby and this was perfectly timed video

[@savagebananas1382]

GIMME X ONE - has to be my favourite castable resin!!

[@vogman]

You're in the drawer 😁

[@proxyfactory2076]

GIMME X ONE Simply great you give away. It will help any of us to try to follow your path ;)

[@vogman]

Bluecast deserve all the thanks. You're in the draw 😁

[@thedourkin]

I've been chatting to a friend who has been designing and casting silver jewelry for years but so far hasn't used 3D printing as part of their process. This video will help to introduce them to the idea. Thanks! GIMME X ONE

[@MakeDo-Turner_Smith]

Please GIMMIE X ONE , I always learn from your videos and this is timely, as I just ordered my first bottle of another manufacturer's castable resin. Please keep doing what you do so well and thanks!

[@awildtomappeared5925]

Tip for heating resin: if you haven't put it into the vat yet or are going to top up and you have an ultrasonic cleaner (with a heating function) you can fill the cleaner with water and put your resin bottle in there to accuratly and quickly heat the resin up.

[@andymeenanvideos]

After watching your videos for over a month now, my shopping list has now expanded from Resin 3D Printer to metal casting equipment, great video. Gimme x one, please.

[@susand8816]

GIMME X ONE, please. Thank you for another great, helpful video. I am hoping to finally have some success casting resin.

[@Creepers247]

GIMMIE X ONE im in my second year goldsmith apprenticeship, currently doing alot of 3d printing and casting, learning alot from your vids. a bottle would be epic, could do alot more prints :D

[@arxocculta]

GIMME X ONE please! Many larp projects can be realized with that wonderful resin! Thanks for the explanations and hints!

[@TtvMeechie]

I like the casting of that ring these videos are very helpful for me because I want to plan on doing the same thing

[@FedericoMirvi]

Dammi "X ONE": La Blue Cast è un azienda leader nel suo campo e sono felicissimo di usare i suoi prodotti, portano il mio lavoro ad un livello successivo, sarei felice che mostrassi in un altro tuo fantastico video la "X FILIGRANE V2" e la "FAST DENTAL MODEL" così da permettere a chi ancora non le conosce quanto siano strepitose queste altre 2 resine della BLUE CAST

[@Mr.HA_]

GIMME X ONE This resin looks really interesting to work with!

[@BBMando69]

GIMMIE X ONE and thank you for the opportunity.

[@vogman]

The thanks go to Bluecast. They kindly provided the bottles. You're in the drawer 😁

[@BBMando69]

@VogMan you're the man representing them so you deserve thanks too.

[@richard_vinson]

GIMME X ONE. thank you your videos are always very informative and engaging.

[@davross_au]

GIMME X ONE ... Thanks for the vid VogMan.. this particular resin looks very promising for me.. I will be soon getting back into my casting and regular jewellery production .. and wouild love to give X one a try.. Cheers

[@chkltcow]

GIMME X ONE!! My girlfriend has wanted to do metal casting for jewelry for a long time. A few weeks ago, we were in a Microcenter and decided to buy a new bottle of resin, come home and get my Creality LD-002R out of storage, and give 3D printing another try with the intention of someday using it for metal casting once we learned more about the process. And today by coincidence, this video showed up on my KZbin homepage. This is ABSOLUTELY PERFECT! Commented, subbed, and bell on..... you are awesome, man! Thank you so much for making this video

[@vogman]

Many thanks. Welcome aboard and good luck. You're in the draw 😁

[@ianmaccormac]

GIMME X ONE Looks very clean! Would love to give it a try. Cheers, Ian

[@headsupremacistnickii]

GIMME X ONE, THIS STUFF LOOKS FRICKIN PERFECT FOR MY UPCOMING PROJECT WOOOOWOOOO

[@OtherWorldExplorers]

GIMME X ONE Once again it looks so wonderful

[@PupkoDaniel]

GIMME X ONE Thanks for nice tutorial!

[@highlander3666]

GIMME X ONE .. excellent video once again.

[@andycruz2076]

GIMME X ONE :v I’ve being watching your videos over a week now and i just want to thank you for all of your reviews of resins and 3d printers it has helped me and many others:)

[@vogman]

Glad you like them! You're in the drawer 😁

[@glhays6832]

Thank you updating the process using XOne by the way GIMME X ONE

[@nosepik12]

Gimme X one, Thanks for an awesome video and inspiring me to start printing jewelry

[@BaconbuttywithCheese]

GIMME X ONE. Your jewelry game is really stepping up!

[@vogman]

Thanks Andrew. You're in the drawer 😁

[@lynall]

I don't comment often on KZbin but how could I not when your videos are so informative and honest. You do us Brummies proud Vogman! 😁 On a side note I work in the JQ in Hockley and I think you'd find some of the drill bits places like HS Walsh sell useful, especially the red rubber cones to get into those hard to clean bits & they leave it almost polished. After a small twist drill with a tiny bit cotton wool with compound works a treat! Keep up the fab content! Gimme X One

[@vogman]

I do buy from Walsh occasionally. I'll have to have a look. Thanks for the tip. You're in the drawer 😁

[@Dtorritesi]

I started my project to build my own foundry inspired by your videos, Vogman. I've been waiting for this review for a while. Gimme X One

[@mihaizaharia00]

Thanks for the timing tips! GIMME X ONE.

[@Annonymous0283745]

GIMME X ONE hope I made it in time! Glad to see your channel growing!

[@ariashahryari5454]

Wow that's gonna save me a lot of time! GIMMIE X ONE

[@natmickan]

I love both the results and the possibilities this opens up. I also appreciate that you share your thought process & the efforts you make to preempt & address questions/concerns etc. Oh, and Gimme x one (please)

[@jwatrous4473]

Thank you VogMan for your videos. They helped me with heating my 3D printer whilst it was printing, as well as figuring out how to cure that pesky Siraya Tech Purple Castable Resin. Keep doing what you're doing! GIMME X ONE (please)

[@nikogoersd6009]

THIS IS AMAZING JUST WHAT I WAS SEARCHING FOR ! GIMME X ONE

[@sherrywhitmore4309]

GIMME X ONE, please! As always, I love your videos, thanks. I'm saving this one to refer to again as I have my Solus working again.

[@vogman]

You're most welcome Sherry. You're in the drawer 😁

[@zelf0moord0eend]

GIMMIE X ONE, jeeeeej a give away🎉! You are getting a reall goldsmith !!!

[@vogman]

I'd love to try gold. It's beyond my means I'm afraid. You're in the drawer 😁

[@zelf0moord0eend]

@@vogman i know its expensive, but maybe try 9k of 14k gold ? You can always remelt with no loss, if you want some info about goldsmithing you can always send me a mail!!

[@alanmcbride5866]

GIMME X ONE. Great informative video as always.

[@TB-bz3sh]

GIMME X ONE - great video as always!

[@themidnightaristocrat]

GIMME X ONE. I've been building up my workshop for a while now. Your videos gave me the confidence to get into casting. Thank you!

[@vogman]

Best of luck. You're in the drawer 😁

[@kaicheng6471]

GIMME X ONE I've always wanted to try 3D metal casting, they look so fun

[@vogman]

You're in the draw 😁

[@markhesketh1889]

GIMME X ONE, great vid as usual, wouldn’t mind giving this a try, love the Easycast 200 though.

[@rustedfriend]

GIMME X ONE Thanks for another quality video VogMan. I'm currently working on an engagement ring and all the information you've put out has been invaluable.

[@poison6pan]

Gimme x one! Thank you for your videos!

[@Bushido_90]

Top notch content as always, keep up the good work! The ring turned out stunning! Don't listen to the haters, we follow you precisely because you do what you do. No sense in changing to appease some negative nobody on the internet when you have lots of followers who appreciate you for being just the way you are! Also, I would love to try this Resin out! GIMME X ONE Please and thank you! :D

[@vogman]

I appreciate that! Many thanks. You're in the draw 😁

[@boba8728]

GIMMIE X ONE Great video!

[@ClokworkGremlin]

Why not, I'll enter. GIMME X ONE It actually took me until the end of the video to realize the ring was supposed to stay a rigid ring instead of turning into a chain. Turned out great!

[@vogman]

You're in the drawer 😁

[@jsjakobsen]

Would love a video about your setup for metal casting and also what to buy for cheapest entry into to this! 😊😊 Have so many ideas I want to cast in gold and silver, but find it hard to get started from scratch.

[@vogman]

kzbin.info/www/bejne/Y4XYpYKYeceri9E 😁😁😁

[@KessellFreak]

Thanks for the tutorial! GIMME X ONE

[@Aurantifolia]

GIMME X ONE. Thanks for the videos

[@chielsaro8667]

Your channel helped me figure out a lot in the context of resin printing. Great content as usual. Keep up the great work! GIMME X ONE

[@MasoumehNikkhah]

GIMME X ONE Thank you for your great videos 🌻

[@kicker074]

GIMEE X ONE never done casting before could be fun to try!

[@vogman]

You're in the drawer 😁

[@burebista1491]

GIMME X ONE. great video, as always! cant wait to try this resin with my Photon Ultra

[@vogman]

You're in the drawer 😁

[@spetersen487]

Gimme X One. I've been fascinated with your videos and how resin casting works. I can't wrap my mind around what happens to the resin when you pour the molten metal on it. I know stupid question, really stupid question.

[@vogman]

It's already gone! During the burn out schedule, the print evaporates to nothing and leaves a hole the shape of the print. The metal then fills that hole. You're in the draw 😁

[@johnbaker5226]

GIMME X ONE Would love to have a play around with this resin!

[@doukasphatskool9364]

GIMME X ONE - Love your videos! We are waiting for a 12k rectangular pixel comparison and an Anti-Aliasing video! Cheers

[@vogman]

You're in the drawer 😁 Actually both my S3 Ultra and M5S reviews showed pictures at various stages of AA. There are also some serious close-ups of items printed at 0.03 height with full AA. In both cases, very good prints.

[@Isac_Stahl]

Super nice output. Just gotten started with printing some jewelry designs myself, excited to begin casting shortly! GIMME X ONE

[@Ray_Danabe]

GIMME X ONE! Btw I love your vids, and I greatly appreciate your unbiased opinions

[@vogman]

Many thanks. You're in the drawer 😁

[@GusFarnes]

GIMMIE X ONE I’d love to try it

[@freakybiggles6458]

I can only hope to make enough mistakes to get as good as you VOG. You really are the original VOG and I think it's awesome how you just rolled with it. GIMME X ONE as my entry. Thanks for your posts VOGMan ;)

[@JonBowers]

Gimme X One, looks fun, got a few ideas already

[@vogman]

You're in the draw 😁

[@derekprinselaar8997]

Always appreciate your videos! Gimme X One!

[@vogman]

You're in the drawer 😁

[@VectorRoll]

Awesome ring design. 🤘😉👍 Gimme X One

[@vogman]

You got it. You're in the drawer 😁

[@tempodaperdere]

X-One is the best resin to cast jewels and it works great with engraved letters, something that always creates issues with other resins.

[@archkittens]

GIMME X ONE Another Excellent Video Vogman

[@vogman]

Many thanks. You're in the drawer 😁

[@dariyap2128]

GIMME X ONE - Great video, as always ❤

[@vogman]

You're in the draw 😁

[@TheGinko]

Long time watcher, first time commenter... GIMMIE X ONE

[@bewareofattackchef]

you make it look super easy, always enjoy your vids now GIMMIE X ONE please and thank you ;-0

[@pipaul761]

GIMME X ONE Great job ! Hello from Switzerland 🙂

[@vogman]

You're in the draw 😁

[@BruhCloudTv]

Gimmie X One! Great vid as usual. Keep up the good work bruh.

[@vogman]

Thanks! Will do! You're in the drawer 😁

[@David_Parkins]

GIMME X ONE Great video. Really appreciate this channel!

[@vogman]

You're in the draw 😁

[@GilB561]

Thanks for the useful tips! GIMME X ONE

[@OneofInfinity.]

Interesting video, never seen this process before and a great outcome.

[@vogman]

Glad you enjoyed it

[@George-ew3gx]

Gimme X One , very interested in trying out. Thanks for the video

[@vogman]

Sorry buddy, that expired ages ago, but no doubt I'll be running similar giveaways in the future, so watch this space 😁

[@itailu]

you make it look so simple. I have no problem with wax but resin just doesn't work, I do everything by the book. I even had bluecast expert help me. all the indents get filled with metal and the surface of the metal looks bad.

[@andregebien9122]

Because of your videos, I've always experimented with Siraya Tech Purple, but I've always had problems with fine details. In addition, it stinks and a lot of smoke develops when it burns out. Bluecast X One could be a good alternative, so... Gimme X One ;)

[@hk6562]

Thinking of doing my first ever resin print soon would be grateful if chosen, exited to start my journey! Thanks for all your tips and guiding me on this fun adventure! GIMMIE X ONE 👑

[@vogman]

Good luck!

[@UnratedPlayer21]

GIMME X ONE (please) Great video as always. Thank you for always bringing out quality and informative content. Best channel about 3d print there is out there. Definitely going to join the Patreon in the future. Thank you for supporting us in this journey. Currently printing with Siraya Tech Purple (after watching your videos), but an upgrade would be nice to try out. Looking forward to more amazing videos like this one. Greetings from Milton Keynes and all the best. Cheers!

[@ladydazz]

hello. I am learning a lot from the video. As a casting beginner, I have a question. I would like to know the exact temperature when pouring a casting with X-1 resin. When I inquired with Bluecast, they said Celsius degrees - Ramps 8 deg / min, but I don't understand what degree I should cast at. Please let me know the exact temperature whether it should be poured at 630 degrees?, 680 degrees?, or 750 degrees?.

[@CharlieBaes]

IMME X ONE - Your channel is down to earth and interesting. Casting print in place items is such a good idea, you should show off the dragon you printed some more.

[@Fahnder99]

you lack some G

[@vogman]

You're in the drawer 😁

[@vogman]

Thanks for helping out. Luckily I think the intent was clearly there.

[@blacknovella]

GIMMIE X ONE keep up the awesome work, love your videos!

[@vogman]

Many thanks. You're in the drawer 😁

[@cerberus333dog]

GIMMIE X ONE I would like to know how brittle , how wax sticks to it for sprueing and how it takes sanding etc. those are things In my work flow more often than fully printing pre sprued models and i often need to clean up support dimples. As always an interesting review.

[@adamthompson626]

GIMME X ONE. I had trouble printing jewelry in pla. Maybe my boss will want to try this.

[@itsokable]

GIMME X ONE love the vids, youve inspired me to try and make my partners engagement ring after a local jewellers made a mess of it!

[@vogman]

That's terrible. Go back and complain! You're in the drawer 😁

[@PaulsGarage]

Looks great to me! GIMME X ONE!

[@vogman]

Good luck Paul. You're in the drawer 😁