BMR CB006 How to install, Chassis Brace/2015-20 Mustang.

How to install BMR's chassis brace CB006 on you 2015-19 Ford Mustang GT S550.
Increase steering stability, K-member rigidity, and reduce front alignment changes on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member and lower control arm mount can deflect under hard braking and extreme lateral loading. Built from a mixture of heavy-duty 2 1/4-inch DOM steel and 1- by 1.5-inch rectangular tubing, BMR’s CB006 Chassis Brace is designed to support and stiffen the factory S550 K-member and front suspension. This increases steering feel and stability during aggressive braking and maneuvering. BMR’s CB006’s front Chassis Brace ties the front lower control mounts to the rear legs of the K-member. The design reinforces every major area of the K-member effectively reducing deflection when fore, aft, and lateral loads are applied to the chassis. BMR Suspension designed the CB006 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes lower control arm mounts and K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR Suspension’s CB006 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!? **NOTE: The Brace does not fit V6 models. It also does not fit 2015+ Mustang V8 applications with Kooks Long Tube Headers.**

[@Rodterraa]

Thanks for the video, shouldn’t the screw be upside down with the longer part going into the car so it wont scratch easily on the ground?

[@nstackerns]

Question I got the BMR CB007 What is the difference between yours CB006 and the one I have CB007 yours is a 4-point mine's is a 2-point is it really a big difference?

[@daffy_6632]

I have Hurricane headers and no lower bracing will fit!

[@mavricxx]

Best install video, thanks for making it! Do you think this BMR chassis bar will clear headers? How did the drive feel afterwards? Much NVH, did it corner better?

[@Beacon_Offroad]

Hey thanks. Absolutely it will clear the headers as I have long tubes and 3" exhaust on my car. Under normal driving I dont really feel anything but in harder driving in corners it slightly noticably. Zero increase in nvh.

[@travisschott7637]

The only headers they are quoted as will not fit with/clear are Kooks longtube headers.

[@Beacon_Offroad]

@@travisschott7637 thanks for the heads up.

[@travisschott7637]

@Carcraft Autotech no problem I noticed the disclaimer when I buying mine from LMR

[@Beacon_Offroad]

@@travisschott7637 Ya, it probably helps to read these kind of things, haha,