BMW 328d (F30) Turn Signal Failure FIX!!

In this video I explain the basics of how to repair the F30/F32 intermittent signal light failure caused by burnt electrical pins going to the turn signal housing. You will need the tail light plug kit and the Outer Tail Light Bulb Holder which are linked below.
Tools needed:
10mm socket and socket wrench
Pick set
Flat head screwdriver
Pliers
Wire cutters/strippers
Tail Light Plug
www.ecstuning....
Outer Tail Light Bulb Holder
www.ecstuning....

[@TheSwedishOak]

Shop wanted 600 EUR to fix this. You gave me the solution to fix it myself for 90 EUR. Thanks man!

[@MillerTheRancher]

Glad i could help!

[@monkeysppp]

I've just found this exact same problem: what started as dim rear and indicator lights turned into dashboard warnings. I've just taken the rear light unit off and pin 3 is almost completely gone! We must be the few people that have actually worn out the turn signal on their bimmers :-P Thanks for the tips - off to order some replacement parts now

[@MillerTheRancher]

No problem. Glad I could help!

[@minimalopes39]

Brother thank you , i used your link to also get the parts , god bless happy holidays , I really needed this, saved money at this hard difficult times , being out of work due to the pandemic, can't afford to really take them car to any shop 🙏💪✌

[@MillerTheRancher]

No problem! I'm glad to help. Stay safe!

[@Gilsun2]

Thanks ... I think the connector pin No. 3 that you mentioned as "turn light.." is Ground (-).

[@AK-dy9xn]

Thank you sir

[@stephendelcampo8471]

Hi. The repair kit I bought didn't come with those green or blue rubber for the wiring harness. Is it OK if I don't use them?

[@andrewbailey2735]

Thanks for this, I just bought the kit and the cover as mine is exactly the same. Do you know what size/type of crimp tool you used? That’s the only thing I don’t know. Thanks in advance.

[@MillerTheRancher]

Hey man sorry for the delay! Once you push the wire into the new metal connector its pretty snug. I used some needle nose pliers to bend and crimp the collar of the connector around the wire insulation. Has been working great for over a year now.

[@andrewbailey2735]

Krazy Content I did it today and so far so good! Held off contemplating a crimp tool but the pliers work fine too. Good man! Thank you .

[@B2daBaZ]

Did you disconnect the battery before doing it?

[@MillerTheRancher]

I did.

[@oussamabenahmed7002]

hello, please where can i get the wiring ?

[@MillerTheRancher]

Hey sorry for the delay. The parts I used in the video are linked in the description.

[@albertogonzalez6055]

I just do that to my daughter car today I replaced everything but isn’t working :( any thoughts?

[@MillerTheRancher]

Hmm what exactly have you replaced? Have you checked the fuse associated with the turn signal?

[@alecpajor9273]

@@MillerTheRancher which fuse is for the tail light I can’t find it online anywhere