Yesss.... first one, thanks gents for the dyno testing much appreciated. Glad to see you two listen and deliver to your viewers 🍻
@ZeroTo60Tube3 жыл бұрын
We need to thank Scott from Nugget Garage for opening up on a Sunday to help us out.
@SWATMM3 жыл бұрын
Thank you Scott from Nugget Garage 🙌🏻
@1993kawasaki3 жыл бұрын
YES, you went to the right place!!
@ZeroTo60Tube3 жыл бұрын
Can't thank scott enough for opening up on a Sunday. Bloody legend. Dane even popped in for a celebrity visit.
@MowerModdin3 жыл бұрын
Good job guys! 12.2 horsepower is a real achievement!
@HassanEido13 жыл бұрын
That's about right for ur boost level on ur twins, you don't need a lot of timing at all. I think the 17Ts are the sweet spot honestly, bigger isn't really usable anymore, and smaller Turbos suffer top end. Awesome build.
@ZeroTo60Tube3 жыл бұрын
Thanks man, wasn't expecting to break 600whp on a aussie dyno. Goal was always dyno jet 600whp, so pretty damn happy. Have you dragy'd your single setup yet?
@HassanEido13 жыл бұрын
@@ZeroTo60Tube I did, I need some better rubber in the back though it made 6.22 spinning half way thru third.. my street tires ain't cutting it especially with an open diff.an identical car with an m3 rear end and 305s in the back ,local to me , when we tuned it , it made 5.6 secs 100 to 200 , still spinning but not as bad
@HassanEido13 жыл бұрын
When I say identical I mean same kit,basically the same tune,but he's a manual with 7700 rpm limiter(upon his request),and 305s out back so yeah not really identical lol, but similar power on the dyno.
@milehighboost55213 жыл бұрын
Insane power out of those 17ts and auto transmission. Thanks for doing this. Doesnt seem like I’d need to upgrade my transmission after all.
@ericisidro19142 жыл бұрын
It will start to slip after a good while running that power just as a heads up (:
@ferrynpalmer38753 жыл бұрын
As soon as you snapped that axle I just KNEW that car was flirting with 750 hp at the crank!!! ...and NOW WE KNOW!! Thank you gentlemen.
@ZeroTo60Tube3 жыл бұрын
Yes, this makes the axles issues all seem more reasonable. I knew the car felt fast, but it does it so effortlessly and without drama or much noise. Super happy with these numbers on this type of dyno.
@Andy-cp6fb3 жыл бұрын
Loving the content guys, one of the best N54 channels on KZbin. Genuine and down to earth blokes 👍
@n54lionmilk3 жыл бұрын
Awesomeness fully loaded. Crazy numbers Loving it n54 twins Hybrids all day everyday🔥🔥🔥tuned in late but lockd in🇯🇲🇯🇲🇯🇲🇯🇲
@friguy44443 жыл бұрын
One of my favorite "0 to 60" videos for sure. The look on his face when he sees the dyno numbers is hilarious! Plus it give those of us that are building budget cars a lot of hope for big power.
@motodigitalvideo3 жыл бұрын
That was the most casual 625hp dyno run I've seen on KZbin... ever!! 😁🤘 I'm glad it did make that number, it kind of validates what a lot of us have been thinking a decently tuned hybrid turbo n54 makes at the wheels! Thanks to the Hoff and Nugget Garage for making it happen 👍
@ZeroTo60Tube3 жыл бұрын
Welcome to seeing what a load based dyno does. The dyno fully controls how fast the car revs. Which means tuners can more accurately tune each RPM range. However, it doesn't make the cool noise of a fast ramp. That said you can set these to sound cool, but it's more for wank than actual purpose.
@jacobbub5063 жыл бұрын
Bad ass man! She's a ripper! I bet you're glad we talked you into getting on the dyno. Lol love from Ohio keep it up!
@ZeroTo60Tube3 жыл бұрын
Genuinely didnt expect these numbers on a load type dyno. Kind of explains why she snaps axles with the auto i guess.
@jacobbub5063 жыл бұрын
@@ZeroTo60Tube my buddy has a 318 with a twin turbo LS swap with 1300 hp. He's running billet m3 axles and they are holding up. I think you'll be solid once you get your m3 axles in. But hell....snap 'em all! No half sends baby! Looking forward to the next video! See y'all soon
@ZeroTo60Tube3 жыл бұрын
@@jacobbub506 Draysens e90 is effing sick!!! Love what he has done with that. The cracks on the shifts are wild.
@ThatGuyTez3 жыл бұрын
Wow that’s absolutely insane for 17T’s! I have the similar setup but with 19.5T turbos at around 23-24 psi so this is a great judgement to see where my car stands
@angelalbertofernandezgarci56072 жыл бұрын
How Many whp you have with this turbos with 24psi?
@shawzymusic3 жыл бұрын
Wow... this got me excited for my tune to be done 😂 that's an insane number. Congrats on that.
@-GA-MancsFinest3 жыл бұрын
as always great content ,youve got me sold on them 17Ts too
@craigy1313 жыл бұрын
Yes! Awesome man! Love this build. Making me think I need to upgrade to 17t's 👀
@ZeroTo60Tube3 жыл бұрын
I should refer to my first drive with them. “Buy upgraded turbos” However as my experience with high power N54s has evolved there is more out there.
@craigy1313 жыл бұрын
@@ZeroTo60Tube I always thought I wanted a big single but I love the power delivery of the stock twin. I can imagine it is very similar with upgraded ones, just more of it 😅 Keep up the awesome work on the channel 👌
@ZeroTo60Tube3 жыл бұрын
@@craigy131 This is something i want to touch on in a video in the next month or two. The upgraded twins make a huge difference.
@Jakejacobsonn3 жыл бұрын
This seems like a dumb question. What is done for fueling I have hybrid setup in the mail on the way only have a stage 2 lpfp in the car now? This have PI?
@shannonboardwine7803 жыл бұрын
Really unreal with those cheap turbos! But I would like to have the whole graph of the torque curve minimum and Max at what RPM because that's what's really getting the car out of the hole.
@igotaction3 жыл бұрын
Congrats on the numbers and the build y'all!!
@cornfedboost3 жыл бұрын
Very impressive result guys I definitely wasn't expecting to see those kinds of numbers.. makes sence now why ethel had a hard time beating this thing back when it was in kill mode, looking forward to seeing it progress 😁🤘
@ZeroTo60Tube3 жыл бұрын
Thanks man!!! Was nice to see you there today too. Can't wait to see Ethels new setup!!! Gonna be so sick!
@cornfedboost3 жыл бұрын
@@ZeroTo60Tube thanks man was good to see you guys and hang out and have a chat, im sure you guys will see it once it's ready to go 😁🤘
@ferozhassan25463 жыл бұрын
Wow 460 odd kw@ the wheels, bloody impressive for a relatively cheap build. Well done guys. Been waiting to see the numbers on this.
@SneakerKidd1013 жыл бұрын
Beautiful. What wheels are those by the way would love a set on my e92 335i
@ZeroTo60Tube3 жыл бұрын
They are style 437 from a f80
@punkboy4593 жыл бұрын
Single turbo is finally happening!!!!! I can't wait!
@davidstevenson12113 жыл бұрын
When you go full single might be worth looking into a stand alone ecu I recently found out motec ecu can support direct injection- high pressure fuel pump- dct control and has a n54 base map, bit pricey but might be worth it to future proof things ???
@ZeroTo60Tube3 жыл бұрын
I have been toying up stand alone. So much more control and safety. More hours is killer expensive tho. I have been thinking about ditching the di tbh.
@davidstevenson12113 жыл бұрын
@@ZeroTo60Tube agreed Ive been saying go Haltech on some of the videos but of recent found out Haltech doesn't offer some of the supported features like the motec does for the n54 should look a look at them
@ZeroTo60Tube3 жыл бұрын
@@davidstevenson1211 I keep going back to maxxxecu. They intergrate with the e9x cars perfectly, so the car will work completely as stock as far as the driver is concerned but the DI will be gone. One good thing about maxxxecu is they will also control the DCT
@davidstevenson12113 жыл бұрын
@@ZeroTo60Tube yeah I've seen maxxxecu they look alright might have to pick one and try it, it would make a good video on weighing up options and what's needed
@timwright33943 жыл бұрын
Whaaaaaaaaaaaaaat!!!!! Great numbers mate that's friggin awesome!
@ZeroTo60Tube3 жыл бұрын
Thanks dude, imagine what your car would be???? Mine does't have the pull yours does..... hmmmmmm
@timwright33943 жыл бұрын
@@ZeroTo60Tube all those cut up hands and bloody knuckles paying off for you my Man!! I am going to go back to Cleveland Exhaust when the time comes he did my first Dyno back when I was pretty much FBO on 98, JB4 and MHD back end flashed put up a huuuuuuuuuuuuuge 327hp at the wheels hopefully that number has increased..... wink wink
@ZeroTo60Tube3 жыл бұрын
I think its safe to say, you'll be double that. Im keen to organise a day and get a few N54s together for an entire dyno day.
@timwright33943 жыл бұрын
@@ZeroTo60Tube we'll wait and see but I'm super keen for dyno day!
@simonqureshi19883 жыл бұрын
Well proud of you lads go team n54 over 600bhp at the wheels Wow..i may look at the t17 turbos for my 2006 e90 n54 with 60k miles..il be happy at 550bhp at the wheels.outstanding lads well done
@br4d1013 жыл бұрын
Well done lads! That’s awesome power n the car handles it well! Quality content 👍🏻
@Nico_335i_DCT3 жыл бұрын
Omg guys, this is insane. Please do this again, right after the DCT swap. I need to know. Probably you need some bigger axles, hahaha. Dutch regards, Nico.
@nickzarafonitis49382 жыл бұрын
I love how your car looks on 437m wheels. What dimensions are they? Can I found some photos of this car with those wheels fitted? Thanks
@sachak3 жыл бұрын
Damn guys. This is impressive, makes me keen to mess with my tune more on the Z4 35i My last dyno gave me 479whp 823nm but that's on 91oct with methanol and only 6 degrees of timing, I think I need to up my game and target some more timing and boost. Well done guys! seriously impressive!
@love200sx2 жыл бұрын
Hello i have Z435i what Is tout mod please. HPLF valbro ?E85
@bstew48413 жыл бұрын
Those big numbers don’t surprise me after watching you snap several axels…sweet ride man.
@ZeroTo60Tube3 жыл бұрын
Thanks dude. Kind of makes sense doesn't it. I was getting a bit perplexed as i havent really seen anyone with a 6at snap axles. Anyway managed to break my dragy 100-200 record just now. Edit will be live tonight. This is a properly quick car.
@StratoJohn3 жыл бұрын
The Hoff, what a legend. And what a powerful car!
@ZeroTo60Tube3 жыл бұрын
He is a bloody legend! And genuinely nice dude
@jimstrongone3 жыл бұрын
💥GREAT JOB MY FRIENDS💥you guys are amazing and im so happy for you guys.😁 You guys wasted no time getting the content we all wanted. Thany You for that. Over 620 HP on a true budget build. he'll ya ❤👍❤
@Zodiam.3 жыл бұрын
I dont remember if you mentioned this during the install, but did the wastegates on your 17Ts need any adjustment before install? Looking for a cheap, "throw in" solution for more power and no more rattle for my OEM turbos.
@ZeroTo60Tube3 жыл бұрын
I didn’t adjust the gates no.
@ilikedojacat39446 ай бұрын
I got a fbo 17t turbo n54 but idk where to get a custom tune and im using mhd atm
@ZeroTo60Tube6 ай бұрын
Ken at Wedge is the man. Tuned so many more of these motors than anyone else, writed the MHD base maps and also has been at the forefront of development since day 1.
@garthharwood16403 жыл бұрын
Awesome guys well done 👊🏼👊🏼
@avimedina6562 Жыл бұрын
I keep cracking ring lands Have you ever gapped the stock rings on N54 engine I am boosting 29 psi
@andrewwilliams53373 жыл бұрын
Hot damn! Nearly reaching 2.5X the power over stock. 😮 no wonder she flies and snaps axels. A little surprised Scott didn’t get you to crank it and send it till a piston comes through the bonnet, or a hoist loop thrown in somewhere. 😜 Nugget garage deserves a lot more love.
@ZeroTo60Tube3 жыл бұрын
Haha he was surprised with the number. I think even saw an eyebrow raise in a impressed way till he remember it was a euro….. haha
@richierich97613 жыл бұрын
Certainly worked out what was breaking the axle ! Stout numbers . Well done
@ZeroTo60Tube3 жыл бұрын
Yeah makes sense why I haven’t seen any other 6ats snap axles. I’ve never seen a 6at twin car make this power on a load based dyno. Very surprised
@antonyklein48823 жыл бұрын
Those zf6hp19's seem to handle the power well. Guess lock up converter is (still) doing its job. Did u brake any auto trans?
@ZeroTo60Tube3 жыл бұрын
Haven't broken the trans yet, i have only heard it slip once and that was trying to do the 0-100 runs with the semi slicks on. It just didnt bite in to 2nd gear like it used to.
@jeremynaug38183 жыл бұрын
Any info on what the Torque reading was?
@ZeroTo60Tube3 жыл бұрын
The dyno wasn't connected to the RPM signal, which i think is why there is no torque reading. TBH i wasnt even thinking about it. Was just looking for HP and keen to check AFRs on the dyno were similar to what JB4 was logging.
@jacobbub5063 жыл бұрын
@@ZeroTo60Tube man...a torque number would have been sweet though! Thank you for getting her on the dyno though. Time for me to start throwing cash at my 07 335. Lol
@trevorsmith92513 жыл бұрын
Very impressive, maybe some 7 series parts to upgrade the rear?
@rayroe13883 жыл бұрын
Dayummmm! that’s some serious horsies. Nice one lads
@MrFunkyBeatz3 жыл бұрын
Siiiiiiick power man. Great to see a bit of good luck for you 😀 if I come down your way we should line up my m4 and that 335 😈
@Saif04123 жыл бұрын
That's crazy power 🤯 Very impressive 💪
@ZeroTo60Tube3 жыл бұрын
Thanks! For a proper load based dyno, i am very happy with the numbers.
@nantan94533 жыл бұрын
Insane numbers. What map are you running on the jb4? Are using mhd backend flash too?
@ZeroTo60Tube3 жыл бұрын
This was ran in Map 6 with custom boost targets. Back end flash is all done by JSRTuning, its a custom flex fuel tune.
@nantan94533 жыл бұрын
@@ZeroTo60Tube awesome, thanks for the response. I love the channel! Lots of great information!
@mazboost3 жыл бұрын
Wtf this car is wild, still blown away by the 6.1s 100-200
@ZeroTo60Tube3 жыл бұрын
Keen to see what the cold weather does. Never driven it for a 100-200 in sub 20 deg c temps. Tomorrow, lets see whats on the cards now.
@Ewok_Nz3 жыл бұрын
@@ZeroTo60Tube harden up. Come to nz for some sub 5 deg c pulls 😉
@ZeroTo60Tube3 жыл бұрын
@@Ewok_Nz i would kill for those temps when trying to make power.
@JamesWebbFitness3 жыл бұрын
Congrats boys great numbers
@dhaladetailing12253 жыл бұрын
Seriously 👍 Holly crap man👌😮 Well done guys!
@ZeroTo60Tube3 жыл бұрын
Thanks! For a proper load based dyno, i am very happy with the numbers.
@sergiovaloy42033 жыл бұрын
Wow congratulations on the buld like your Channel a lot always has great content I have a 2013 335is made 653whp on dyno pushing 28psi dynamics autowerks flowmax it was dyno tuned I feel the power isn't there I'm going to have it street tuned to see if there's a difference what is your wheel and tire set up looking new setup but the roads in NY are horrible
@ZeroTo60Tube3 жыл бұрын
Grab a dragy and remove any doubt on its power. Dragy best way to know what it’s doing in the real world. Current wheels are m437 genuine wheels and they pretty light, car feels faster with these. Also have a 18 set of Koya wheels which I run the ar1 tyres on for trying to really go quick.
@MrFinno893 жыл бұрын
Congrats she’s a Beast
@hillsidemotorsport39793 жыл бұрын
Some very impressive numbers guys! Truly a budget build too. Also Dave been working out? #jacked
@AndymacNi3 жыл бұрын
Brilliant content guys😎🍺
@MatthewGlad3 жыл бұрын
Looking forward to a new Dyno for the DCT
@ivetakentheredpill68473 жыл бұрын
Haha, the look on your face made this vid bro. Awesome result 🤙🏼
@ZeroTo60Tube3 жыл бұрын
I was not expecting to break 600whp on this type of dyno. Bloody mega. Explains why she chews axles tho.
@ivetakentheredpill68473 жыл бұрын
@@ZeroTo60Tube with results like that i don't think I want to line up with you in x5. Nobody like getting eaten lol
@ashcadelanne85243 жыл бұрын
Single turbo n54’s have been done to death - albeit very nice - why not go compound twin? So in series rather than stock parallel
@ZeroTo60Tube3 жыл бұрын
Mainly room. The Rhd have very little options for decent sized exhaust housings. The single to will be like no other. I promise 😛
@ram00sa003 жыл бұрын
What type of fuel is that and can you do a run on just pump gas
@KingKhu0ng10 ай бұрын
What was your WGDC at?
@alexwalsh313 жыл бұрын
I knew it would make big numbers followed this from the start
@pugs13773 жыл бұрын
Suprising numbers! Looks like a winning combo. How much ethanal were you running?
@ZeroTo60Tube3 жыл бұрын
E68 was what the gauge was reading at the time.
@pugs13773 жыл бұрын
@@ZeroTo60Tube have to keep that in mind for the after Dyno!
@anonymus1012803 жыл бұрын
Hi ..what tuner are using ? And stills in stok fuel system? Congratulations
@ZeroTo60Tube3 жыл бұрын
JSRTuning and JB4 Port Injection. 💪
@anthonywhelan83733 жыл бұрын
How much Tourque in ft/lb ?
@ZeroTo60Tube3 жыл бұрын
The dyno wasn't connected to the RPM signal, which i think is why there is no torque reading. TBH i wasnt even thinking about it. Was just looking for HP and keen to check AFRs on the dyno were similar to what JB4 was logging.
@pvtpelnar112 жыл бұрын
So do they still work? I’m thinking about buying did you go with the Viv model?
@ZeroTo60Tube2 жыл бұрын
MIne are sweet, however it seems a bit luck of the draw
@anythingandanything38263 жыл бұрын
Can you make a playlist with all the builds for this car
@anythingandanything38263 жыл бұрын
Does the heart mean a yes?
@ZeroTo60Tube3 жыл бұрын
kzbin.info/www/bejne/qIapgmONedWLoac
@anythingandanything38263 жыл бұрын
@@ZeroTo60Tube awesome!!!!!
@ehworkshop99222 жыл бұрын
What correction are you running on the dyno , with my hub dyno i run no correction on turbo cars
@ZeroTo60Tube2 жыл бұрын
Hey There, i honestly can't remember. Its what ever Scott runs this dyno in when he is tuning.
@jakechanning20653 жыл бұрын
Keen for the ST build 😏 let’s get it happening !
@lafrancebmw Жыл бұрын
Jsr for tuning? Why not wedge?
@ZeroTo60Tube Жыл бұрын
JSR for JB4 BEF, wedge for MHD only
@BeatNCancer3 жыл бұрын
what was the car setup at this time? apart from the 17ts
@ZeroTo60Tube3 жыл бұрын
Its had 2.5" dual exhaust, modified RHD outlets, DCI, port injection, 7 inch china cooler, JB4, elder coils, tuned by JSR.
@richardfallow2 жыл бұрын
Hoss is awesome, nugget garage making moves too
@tighematthew3 жыл бұрын
So with those numbers my old one it had no port injection just 17ts and custom tune to do 11.6 @122mph i must be around 500whp then. Maybe
@ZeroTo60Tube3 жыл бұрын
Yeah 100% your car would have to be around 550whp at least for the 122mph. Loving this cold weather tho.
@tighematthew3 жыл бұрын
@@ZeroTo60Tube your car is going to be a rocket with the DCT its going to be Awesome
@Ewok_Nz3 жыл бұрын
What the f is correct.. Impressive numbers guys. Really makes me want to get my 17t car on a dyno on e40 without PI. (I blame you for my choices 😉)
@cocko11353 жыл бұрын
Same set up as mine. Fun as fuck car!
@Ewok_Nz3 жыл бұрын
@@cocko1135 I converted mine to manual with a twin plate clutch and a lsd. It’s a complete animal.
@cocko11353 жыл бұрын
@@Ewok_Nz I deadset just drooled when I read that 🤣🤣. You would be a very busy man, so cool!
@SneakerKidd101 Жыл бұрын
What was was the spool like with these TD04 17T
@ZeroTo60Tube Жыл бұрын
Pretty much like stock.
@SneakerKidd101 Жыл бұрын
@@ZeroTo60Tube sick . Im going with RB game changer 17T TD04s soon cant wait for the result
@huanweili76992 жыл бұрын
What type of fuel/octane did you use during this dyno?
@ZeroTo60Tube2 жыл бұрын
I did mention it in the video. From memory it was e65-e70 fuel mix.
@maxmoughal51833 жыл бұрын
That was quick!
@seanissomething3 жыл бұрын
what a beast!
@markhutchens49443 жыл бұрын
Liked before I even watched👍🏻
@thebestsoccer20633 жыл бұрын
What kinda mods you have with this 17ts?
@ZeroTo60Tube3 жыл бұрын
FBO, upgraded full exhaust, port injection, JB4, custom JSR tune through MHD.
@lancewood14103 жыл бұрын
HORY SHITO!......thats a fking great number dude!
@blackbmw57312 жыл бұрын
Is that number wheel horse power or crank hp
@ZeroTo60Tube2 жыл бұрын
Hubs, so likely a smidge over 700hp at the crank.
@KurumaDesigns3 жыл бұрын
Damn that’s sick!
@n54lionmilk3 жыл бұрын
Team N54🔥🔥🔥
@andygarcia66193 жыл бұрын
Serious hp 💪🏻
@Thewhitepearlfocus3 жыл бұрын
YES LADS!!!!
@MrKillerhaze3 жыл бұрын
I love your Channel mate just wondering why you never just got a N54 AWD for you can actually reach the numbers you looking for in real time i have a 09 N54 AWD fully tune and mine does 0-60 in 3.5 seconds or less depending on the weather in New York but I can imagine having power like your car you can easily hit 100-200 in 5 or less seconds with AWD lol
@ZeroTo60Tube3 жыл бұрын
You actually can't get a N54 with awd for right hand drive markets.
@Kh.J.3 жыл бұрын
On What gear was those runs
@ZeroTo60Tube3 жыл бұрын
4th
@raowee57073 жыл бұрын
Etanol mix?
@ZeroTo60Tube3 жыл бұрын
E68 on the flex sensor for these runs
@raowee57073 жыл бұрын
What cluth u running with?
@ZeroTo60Tube3 жыл бұрын
This is auto. Switching to dct with stock clutches at first
@savinmaharaj95643 жыл бұрын
Well done gents. Thats some strong numbers. But I can honestly say on a proper load dyno, u won't make more then 600whp. I had mine dynoed at 21psi and made 557whp and 740nm. That was on 93/95 octane unleaded pump gas with 1lt of NF Ultra race additive.
@ZeroTo60Tube3 жыл бұрын
This is a proper load dyno….. in fact this is one of the most power proper load dynos you can buy. The retarders are rated to hold 3000hp. I didn’t realise while filming but it’s dyno dynamics latest and greatest dyno for high power cars.
@savinmaharaj95643 жыл бұрын
I'd like to see u do a few dyno runs on rollers. Will be interesting to compare the results.
@colin55594 Жыл бұрын
With 17t turbos you made that power?
@savinmaharaj9564 Жыл бұрын
@n54 We now managed to get it to 612whp with a little tweeking on my back end flash. An absolute beast now 💪
@17t135i3 жыл бұрын
Interesting, virtual Dyno showed 588whp from your 3rd gear log you posted the other week, however 3rd has less load than 4th gear and the log finished at 6200rpm which will be below your peak power..
@ZeroTo60Tube3 жыл бұрын
Correct, also wont have accurate weights, air temps or tyre size with the info you had on the log. :P
@powertrain3553 жыл бұрын
Virtual dyno works
@rueben683 жыл бұрын
One just wonders what it could do under METH and JSR at the ready to send you adjusted maps 🤔 700 🐎 You have done awesomely with this car bro.
@ZeroTo60Tube3 жыл бұрын
I really don’t know. I’m sure there might be another 5-10% in it for a kill tune. But maybe that will be a “kill my motor” tune
@msalamlaham71293 жыл бұрын
I'm calling it from now with a DCT it will make 647.3HP with the same tune and dyno
@socobarbell3 жыл бұрын
My opinion, hopefully others will agree? Don't do a single turbo. You already have a single turbo car. Just push the 17t's to their max first. Still so much you can do to this car.
@Justin-qs9nj3 жыл бұрын
Yes I agree. But truthfully anything these guys do will be awesome!
@ZeroTo60Tube3 жыл бұрын
I still wanna wind them up for sure. But 17t twins get to a point where you start risking the motors due to back pressure. I’m probably just under the danger zone right now (maybe). But driving a single is a whole mother experience. We will keep twins on the Vargas car tho. But I want them to be better than the 17t twins
@socobarbell3 жыл бұрын
Interesting I haven't heard of this back pressure issue. Looks like I'll be doing some research. I'm pussing my 17t's at 26psi and 19 degrees of timing. So far so good. Thanks. Always learning.
@ZeroTo60Tube3 жыл бұрын
@@socobarbell Jesus 19deg of timing. I have only heard of race motors doing that and then its like for 1 or 2 passes. Are you on stock rods?
@socobarbell3 жыл бұрын
@@ZeroTo60Tube I have logs with the off the shelf e85 port injection be flash when my engine was stock where it was pulling 22.5 degrees. I guess I don't know enough about the tuning side to have thought that was alot.
@Mike69KTS3 жыл бұрын
So china isn't lying when they say 750hp. You could make that to the crank on these. Not 750 whp but still.
@murk13523 жыл бұрын
See what I meant. My car with the aggressive tune that it has and only 43 thousand original miles. I didn't cut any corners with parts either. The AFE dry filter intake I have with VRSF catless downpipes, agency intercooler, VRSF charge pipe with twin turbo smart blow off valves my car screws. I wanna get it dyno'd. I know I'm making at least 500+ ATW's. We'll see eventually. I'm still doing a few things but my video is right around the corner. Bought a new dog so got side tracked this week...👍🏁
@ZeroTo60Tube3 жыл бұрын
Just had a side thought. What about a dragy? Will probably be the best side by side power comparison. Unless you can get on the same time of dyno.
@murk13523 жыл бұрын
@@ZeroTo60Tube I want to get a draggy but there's really no where for me to get on my car unless I go on the highway which state police are always in cars you'd never expect! I'll get it on a Dyno soon enough. This guy I used to hang out with like 27 yrs ago when I had my Vortech supercharged mustang just bought a new shop and he has a Dyno. I'm gonna try and make that video tomorrow or this weekend. I just bought a new dog and have to pick it up at the airport. Plus I have a muscleskelotal disease called fibromyalgia that always messes up my plans. You guys will be the first I contact when it's done so you can see it....👍🏁
@murk13523 жыл бұрын
@@ZeroTo60Tube Check out my car on Instagram. Jordanberry32 you can atleast see the car and some of the titanium I've been doing under the hood. You can see some mods as well. I got a new number and can't get into my old Instagram...??? But atleast you can see my beast!
@glennarnold39703 жыл бұрын
well done guys i can see some custom made axles coming real soon
@ZeroTo60Tube3 жыл бұрын
Kinda makes sense why they keep breaking now.....
@glennarnold39703 жыл бұрын
@@ZeroTo60Tube did you find out if you have a faulty waste gate have you had a good look at your 2 cacuum canisters to see if any have hair line crackes in then do they feed each waste gate? i hope its warm up where you are as broken hill in friggn cold cheers glenn
@ZeroTo60Tube3 жыл бұрын
@@glennarnold3970 Havent found the issue. 3rd gear is still that 1psi under target on the street. I havent wound out 4th on the street. It was closer to target on the dyno, but the load that dyno puts on the car is insane so it will build boost better than on the street.
@Al-of3zp3 жыл бұрын
... 🤔 Do I believe that number plate after so much effort to hide it?
@ZeroTo60Tube3 жыл бұрын
What number plate? Never heard of her.
@Guineapalz3 жыл бұрын
Wow
@joshbrennan85453 жыл бұрын
Very tidy mate!!
@joshbrennan85453 жыл бұрын
Would already be in the 8s if you were in the states :)
@ALEX.THE.RUSSIAN3 жыл бұрын
Howuch boost guy? This is crazy, I have to be way over 740 then
@ZeroTo60Tube3 жыл бұрын
26psi. Would be keen to see yours on a dyno. My only advantage will be port injection. You and i run similar timing targets. But your turbos will flow a lot better.
@ALEX.THE.RUSSIAN3 жыл бұрын
@@ZeroTo60Tube yes sir, that's true but I am running a lot of methanol though those two nozzles in the charge pipe cm10 and cm7, that compensates for the rest of the lacking Ethanol, I think I found the perfect fuel set up is the one it's running now, a lot of meth and e40
@ZeroTo60Tube3 жыл бұрын
@@ALEX.THE.RUSSIAN fair enough should be interesting to see that’s for sure.
@ZeroTo60Tube3 жыл бұрын
@@ALEX.THE.RUSSIAN I should add with port injection and e85 you’d be able to target closer to 15deg in a kill tune. Ohhrly has run 18deg for its passes. Getting that large volume of e85 I. The cylinders helps massively. More so than meth.
@colin555943 жыл бұрын
I shredded diff gear with 550whp 590tq
@ZeroTo60Tube3 жыл бұрын
That’s something you don’t see very often. Where you on stock axles or upgraded?
@colin555943 жыл бұрын
@@ZeroTo60Tube stock axles, open stock diff. I don't even launch it just aggressive cornering, some power slides. I couldn't find many people with a broken diff either, maybe I got unlucky.