Very well done, impressive to do all that without a lift!!!
@t.l.robinson21623 жыл бұрын
I'm very glad that you posted this video. I learned 2 things. #1. I didn't know that the 750iL has a larger fuel tank than my 740iL. #2. I didn't know that I could access the fuel pump from the back seat.
@GeraldmitLunaSorayaRichter28246 ай бұрын
Thank you for the great video ! A respectful job from you ! Warm greetings from Garry (61) from Munich (Germany - Octoberfest city) and stay healthy with your family !
@gregorynelson777 Жыл бұрын
You are absolutely amazing Man! Great work!
@lapd19894 жыл бұрын
Love the e38
@Carterprobinson3 жыл бұрын
Thanks for the video! very helpful for recovering my rusty tank... the driveline was definitely the hardest part for me the side the connects to the trans did not want to budge at all, the Milwaukee and the breaker bar couldn’t do anything had to get my buddy to do it took him like 5 mins
@Unlaced_kickz Жыл бұрын
Do you remember the size of the bolts ?
@madmaz88903 жыл бұрын
Very useful and informative video, im breaking a 728i for parts and am removing the fuel tank, was a bit stuck earlier on wether or not prop shaft needed to be removed and where some of the bolts were but after seeing this it confirms that shaft does need to be removed and location of the bolts! So thank you also, amazing work very thorough!
@GeraldmitLunaSorayaRichter28246 ай бұрын
Merci pour la super vidéo! Un travail respectueux de votre part ! Salutations chaleureuses de Garry (61) de Munich (Allemagne - ville de l'Oktoberfest) et restez en bonne santé avec votre famille !
@boltonky2 жыл бұрын
Thanks for the video, Have to clean out my tank but think i may need a better place to do it than my dirt driveway....Also word of cation about wheel ramps i always place blocks of wood under the car or inside the wheel ramps as i have been trapped once and nearly sliced in half another time from them failing (as most have crap thin steel, it should be thick gauge)
@berndcassel2581 Жыл бұрын
Excellent video
@nikolamladenoff35167 ай бұрын
Hey, man, splendid work! I am battling a rusty tank and was wondering what were the new parts you installed at the end ? Could you perhaps provide part numbers for them ? Thanks!
@tsherwoodrzero2 жыл бұрын
Excellent job. I wasn't sure if it was in the video or not, but I thought I'd ask since you had the tank out. I found my E38 740i to be dripping quite a bit of fuel in front of the driver's side rear tire while it was running. While sitting for a few days, there was a puddle under this location too. Are there any certain parts that would result in a leak here? Thought it wise to ask about any likely suspects before dragging out the floor jack and making a mess.
@berndcassel2581 Жыл бұрын
Ecellent work,excellent mechanic
@aimarkabin2094 жыл бұрын
Cool video.
@bmwguru6611 Жыл бұрын
Impressive work well done i was wondering did u keep the 740i floaters and fuel pump? Will the cluster work properly as it works on a 750.
@makosasimakis1183 жыл бұрын
You didn’t show the best part . Filling the new tank with premium gasoline. Hahahaha great video !
@rjkulman89904 жыл бұрын
nice job, by yourself
@PBz4203 жыл бұрын
Excellent e38 content
@Frostified3 жыл бұрын
Doing this on my 750 right now.
@Unlaced_kickz Жыл бұрын
Do you remember the size of the drive shaft bolts ?
@nicklashavn29283 жыл бұрын
Hello. have to do the same swap. fits a 95 l tank on one with an 85 l tank. only tank straps for 95 L are to be used. what about misalignment in gasoline gauge.
@MecaLogic3 жыл бұрын
There are the same, you need to recode your cluster to take the 95l measurement
@nicklashavn29283 жыл бұрын
@@MecaLogic okay tanks. It's a good video. Good job 👍
@Matysjindra5 ай бұрын
I have a 728i e38 and need to replace the fuel tank. How much does it cost to replace with a new tank if I were to drive? Thanks.
@arturowczarczyk7633 жыл бұрын
Good Job !! 👍👍👍
@h3istheonex3734 жыл бұрын
Respektvolle Leistung
@Unlaced_kickz Жыл бұрын
Does anyone know the size of the bolts on the drive shaft ?? Please
@quartznation94993 жыл бұрын
I just want to replace the fuel feed line that comes out of the fuel pump side.. Can I just wiggle it through from the top and remove the heat shield from under the tank to connect the other end? Or drop the entire tank? Thanks
@MecaLogic3 жыл бұрын
I think you can do it without removing the tank but I am not sure. But it's qucik to know