BMW e46 DISA repair - PERMANENT FIX!!

[@daverose1533]

Your tip to use a bolt to help remove the flap was a life saver 👍

[@alex_munk8302]

Oh my god 😂😂😂 that’s literally everything wrong with my car. I’m gunna order the kit and fix this issue. Thank you Evan

[@joeysplats3209]

I just installed a DISA rebuild kit from German Auto Solutions and it was simple and straightforward, using the step-by-step instructions on their website. The product is quality and their customer service is great. If you have 100K miles on your E46, you should rebuild or replace your OEM DISA.

[@elvrboy]

about a month ago my car started idling very rough for a week, it wasn’t drivable, soon i started hearing some loud knock noise inside the intake manifold. lucky the disa valve flap and pin were barely on still, got a new disa!

[@EvanGoyuk]

Wow this can be very scary

[@elvrboy]

Evan Goyuk yeah man i’m so glad i found the issue before the pin fell into one of the intake manifolds and blow my engine

[@Karydman]

Was the yellow lever broken in half?

[@Zinno25]

Nothing hypothetical here, this THE ACTUAL stuff

[@oscardeltoro898]

Researching this before I tackle mines. No codes other than p0171/p0174. Car was down for 3 years sitting outside so it's more of a resto maintenance wise. I can somewhat confirm my pin has not entered the chambers however I do hear metal clicking around somewhere upon cranking and then it disappears.

[@pedrodiaz6558]

You don’t have to lubricate the disa valve (the part that goes inside the intake) before right? It’s just a doubt before installing mine

[@sbrave]

You sounded better outside

[@joegatlin2788]

Hey Evan I have a 2006 e46 330ci zhp coupe with 255,000 miles and it rans like a new car

[@EvanGoyuk]

That’s awesome to hear!!

[@Neo-ih2fh]

hey brother, if i forgot to put a crazy amount of lube in the hole. Will this damage anything? I did Lube the base of the crank very well, and slid in nicely. Please let me know. I swear it just sounds different.

[@tengzturiagaiii3185]

So mine, when i go it out. I checked the flaps. Moved it how it supposred tonopen and close. It seem normal. Its still intact. So is that mean is still good?

[@jagfox2457]

When I took the DISA valve out, the pin was missing. what should I do to find it

[@yncpollo]

Hey did you ever find out please let me know

[@jagfox2457]

@@yncpollo I used a Borescope and a magnet to get it out. It was jammed stuck on the entry way to one of the cylinders inside the manifold so be very careful

[@yncpollo]

@@jagfox2457 forsure thanks for the reply

[@yncpollo]

@@jagfox2457 did you have to remove anything ?? Fuck I’m trynna replace mine tomorrow but that screw shit got me paranoid

[@jagfox2457]

@@yncpollo I just took out the DISA valve and stuck the borescope inside the manifold. if its too deep in there then id suggest removing the entire intake manifold off but you most likely wont have to. Good luck

[@youonlyliveonce2556]

Don't forget to cover the lower intake boot , you really don't want nothing to go in there while working on your car

[@Bautista999]

Is the o ring still suppose to be visible ?

[@Bautista999]

After install

[@Dani_1148]

You should do a video of the floor is lava

[@aidancadogan7998]

How long is the original disa valve supposed to last?

[@C330ZSP]

Do not let it get to 100k without replacing, be careful if you dont

[@joeysplats3209]

@@C330ZSP when I read about the potential problems with a DISA that has a lot miles on it, I immediately found a high-quality company that sells a good rebuild kit. (German Auto Solutions) My DISA, at 160,000 miles, was still in great shape but the risk of that pin falling into the manifold is just too big for me. Now I don't have to worry about it and my E46 has a bit more pep. I also got a new coolant cap.

[@Bimmerboiz1]

Wow this videos audio is really bad bro

[@bogusienombre355]

I hear that single pop sound after I turn off engine. Is that normal operation?

[@Soph_Js_Version]

I have this to.

[@krispychickengamer9950]

You should’ve just stayed filming outside. Seems like there’s more wind inside than outside

[@joeimbesi5361]

On another note, I have an 01 330 coupe with 58,000 km. Occasionally, a gear like symbol(*) appears in the gear indicator gauge. When this happens the car will only run in third and fourth gear. If the * appears and I turn the key on and off, the * goes away and the car runs normally. My mechanic thinks it might be the park indicator switch. Has anyone else had this happen?

[@Eratiik]

Mine did this a few times before when I first purchased it, same year and model, i put it down to me turning the car off and on again when it was in tiptronic mode. (Mine was auto)

[@bogusienombre355]

How's the disa holding up in 2021?

[@JohnstonPettigrew]

He doesn't answer questions.....he has gone on to own 10 BMW retailers all over the nation.

[@Dani_1148]

Can I be in your videos love your little sister Danica

[@JohnstonPettigrew]

sound murderer.......

[@sscharlemagne2060]

Really bad video there is poor sound very bad light the man cant even speak well. there is far better videos to watch about this subject.

[@oscardeltoro898]

Unsure how this comment is of any help to anyone other than causing critique to the creator. Unsure if you have ever taken a jab at recording yourself and uploading content but something like this would require hours of setting up and reviewing your videos. This would also be critical that you have it "perfect" while disassembling, while checking your own voice and maintaining yourself on the topic lastly making sure you dont mess up on video or mistakenly break the part. Doubt you'll read it or care, more than likely you'll tell me to go screw myself in an attempt to save face.