do you need to install the hood connector plug thingy? if so how?
@Frenko12 жыл бұрын
No you don't
@LilSwervoJr2 жыл бұрын
@@Frenko1 any coding required? i have a 2009 328i
@Frenko12 жыл бұрын
No, it was plug and play
@LilSwervoJr2 жыл бұрын
@@Frenko1 thank you so much for your reply and last question do i have to disconnect the battery ?
@Frenko12 жыл бұрын
No
@okantarakci36744 жыл бұрын
I have a pre-lci e90 320d 2005 and I dont have an alarm so I can do the same way you did with my car ? There are sockets already there ?
@Frenko14 жыл бұрын
Yes if you have an extra plug above and one in the wheel well. You can run your vin number through vin decoder and it'll tell there too.
@okantarakci36744 жыл бұрын
@@Frenko1 How can I learn it with vin doceder? if you mean $302 in vin decoder I dont have this in my vin
@Frenko14 жыл бұрын
Go on Google type in bimmer.work put in your vin and the next page will show you all options that you have. Should say 5GA Prep. Anti-theft Alarm System.
@okantarakci36744 жыл бұрын
@@Frenko1 I dont have Alarm System on my car I know that so I dont have those cables you showed in video right ?
@Frenko14 жыл бұрын
You can check, just pull down the over head and see if you have a extra plug
@hovajz Жыл бұрын
Hey my friend. I installed the alarm just like you did, I have a 2008 BMW 328i alarm works great but no acoustic sound unlocking and locking. How do I fix that?
@Frenko1 Жыл бұрын
You'll have to enable it in coding section. Most will work right away but some you'll need to hook up programming tool
@hovajz Жыл бұрын
One more question for you. Does it works for the E90 2008 328i sedan
@zamandefru9171 Жыл бұрын
Yes it does
@mmario14092 ай бұрын
Hi,how do i do it to one e93 2008,you think it will work?thanks
@Frenko12 ай бұрын
@mmario1409 yes it'll work but you need to research where is plugs located since that's convertible.
@mmario14092 ай бұрын
@Frenko1 ok thanks,i get back later once i sort it out
@crshwops56813 жыл бұрын
I have a 2006 bmw e90 and everyone I lock it the light never flashes so I feel like I can add this and mine is pre wired so do I need anytime of coding or this is all plug and play ?
@Frenko13 жыл бұрын
Most of them are plug and play. I've put 4 alarms in 4 different Bmw's and only one of them I had to code it. If you have Carly you can do it. Basically you have to code from non active to active. Let me know if you need anymore help.
@crshwops56813 жыл бұрын
@@Frenko1 thanks man will let you know
@kingb7080 Жыл бұрын
Good video. I see that my car is wired for this. So all should work without programming?
@Frenko1 Жыл бұрын
Yes
@kingb7080 Жыл бұрын
@@Frenko1 Thanks
@hovajz Жыл бұрын
I had the same question 🙋♂️. My vehicle is a 2008 328i pre wired. No coding required. I like that. Plug and play 👍🏽
@hovajz Жыл бұрын
Thanks for the video Frenko.
@kingb7080 Жыл бұрын
@@hovajz Mine works no coding. I just changed the acoustic sounds and I love it.
@jeffstrickland92493 жыл бұрын
The E93 does not have the roof cavity to install the module. Where does the module go in my '08 E93? My car has the prewire, but the place in the roof does not exist, or it's not in the same location because there is no light in the location.
@Frenko13 жыл бұрын
Honestly, I have no idea where it would go on e93. I think you can install only Siren and not the module. I think its only for motion inside vehicle.
@mmario14092 ай бұрын
Did you sort it in your e93?i have the same e93 and no slarm..but i think there should be a trick to do it...did you sort your one?
@dinadukic32544 жыл бұрын
Cool 😎
@kacperkawala4 жыл бұрын
Can you link me what I need to purchase ? Canadian 323i with pre wiring
@Frenko14 жыл бұрын
I left the part numbers in description for what you need.
@kacperkawala4 жыл бұрын
@@Frenko1 but thats only 2 parts full kit is 4 parts
@Frenko14 жыл бұрын
If you want full kit, you'll need these plus those two in description. Hood switch part #61319119052 Siren bracket part #65756940124 Mounting plate part #65756936588
@kacperkawala4 жыл бұрын
@@Frenko1 do you need full kit for it to function?
@Frenko14 жыл бұрын
No, you just need the ones in the description plus the bracket. Make your own or buy oem
@IvanCarrasquillo Жыл бұрын
Would this work on my 2011 328i?
@Frenko1 Жыл бұрын
Yes, just check for pre wiring.
@IvanCarrasquillo Жыл бұрын
@@Frenko1 how do I check that?
@Frenko1 Жыл бұрын
Just pop the above head light like in the video and you should have extra plug there not plugged into anything.