BMW F10 Ambient Lighting Kit Installation Guide: Transform Your Interior with 9 Color Options!

[@mrrobertthomas3903]

You really out here doing every F10 side mission 😅

[@JohnsonMotorsports]

😂 I try!!!

[@sagethegodvk]

I stg I’m still trying to catch up…. bruh you should do the G30 conversion atp

[@DMVBaller362]

@@sagethegodvkhell nah g30 design ain’t better than f10

[@JohnsonMotorsports]

I’ve thought about it, we’ll see.

[@ink.F10]

I’m greatful for this man really helping me wit mods to do for the f10😮‍💨

[@Celio95]

Bought mine 535i about tow months ago.. your Channel is my heaven 😅

[@JohnsonMotorsports]

😂 Thanks for your support!!!

[@jorge8915]

It looks great I love the f,10 535i

[@JohnsonMotorsports]

🙏🏽

[@zuh1902]

Can you provide the link to buy the kit?

[@shottabraze9387]

do you have the link to this product ?

[@BurrNinja]

Looks very good Grant!

[@JohnsonMotorsports]

Thanks!

[@Zay18k]

Been waiting for this!! Do the ambient lighting speakers plzzzz

[@JohnsonMotorsports]

I haven’t looked into a speaker kit, I’ll check.

[@danielkime753]

Thanks Grant! Great video. Would you mind sending or posting a link to this kit? I went on RVG's website and I can't find anything remotely similar.

[@JohnsonMotorsports]

From what I understand, RVG has not added this link to the website due to the low supply. You can DM RVG on Facebook or IG and see if they have any stock remaining.

[@Chillalexin]

thats dope i need to get that ....how many colors does it change ? i was just gonna get it at ali express they got the same one.

[@JohnsonMotorsports]

9 colors.

[@turbospool]

beast!!!! looks awesome bro!

[@JohnsonMotorsports]

Appreciate it!!

[@turbospool]

@@JohnsonMotorsports well you showed me something so obvious but it had never occurred to me, lol... disconnect the door handle cable FROM THE ACTUATOR, and not from the door handle like I have been. I've been working around the harness and the cable for no reason! The cable can come out WITH the door panel lol. siiigh, lol thanks again!

[@JohnsonMotorsports]

@turbospool 😂 Yeah, it makes things easier.

[@davidheng7915]

I’m all set 😂

[@JohnsonMotorsports]

ok

[@Itsbeamerbaby]

That's dope 🔥

[@JohnsonMotorsports]

🙏🏽

[@my_garage_Vladimir_workshop]

Hello! Can you tell me more about how to connect the connectors? I also have a 10 pin joystick. And the ambient light block has 4 contacts.

[@Cobra119595]

Fits this Set for F30 too?

[@JohnsonMotorsports]

I’m not sure. You will want to reach out to RVG Performance and inquire.

[@josephmgomez3921]

Hey Grant, wich aftermarket screen do you have panel?

[@JohnsonMotorsports]

I purchased a screen through RVG Performance. You can DM him on IG or Facebook and see if he has any available.

[@srtderrick9536]

Hey man I was wondering if you could help me out. Connected everything and went to plug in power box module. No lights work When i plug it in also my I drive stops working, and my radio buttons and ac buttons stop working like it is being shorted out, then i unplug and everything works fine again. I’m thinking my wiring might be off. Which color wires on back of radio head unit did you connect the White, Blue, Orange, and Brown wire? Thanks

[@JohnsonMotorsports]

It really depends on what Headunit you have system. Do you have CIC or NBT? Have you looked for some walkthrough videos online?

[@terrencebrinkley2272]

Nice!!!!

[@JohnsonMotorsports]

🙏🏽

[@Adysan37]

Can someone tell me if i have an F11 and no ambient lighting from factory do instill have the connections to install ambient lighting or no?

[@salemb96]

Can you switch the light in the menu or in a phone app? Well done, I'll try it soon too. Hopefully nothing will break.😂

[@JohnsonMotorsports]

Nope. For my pre lci f10 with the CIC the ambient lighting is controlled via the preset buttons on the stereo.

[@gordanivankovic7138]

@@JohnsonMotorsportswhat is the present button?

[@MS98-zd2ry]

Did your stock had ambient lighting already?

[@JohnsonMotorsports]

No, just the base amber light bulbs.

[@Swayjofficialmusic]

Does this need to be coded?

[@JohnsonMotorsports]

No, not on my CIC system.

[@SHWELL11]

Looks great, but way too involved for my liking.. Thanks for sharing..

[@JohnsonMotorsports]

😂

[@jeffa.8976]

You have one of the nicest F-10s on youtube and I appreciate you documenting all your mods, it helped me a lot. Have you done any draggy or strip runs with the new turbo? I have a 13, 535Xi M-Sport which has an OTS BM3 stage 2 tune, XHP stage 3 tune and with the stock PWG Turbo. I have it dialed in pretty good and run a 12.7 in the cold weather up here in Edmonton Alberta Canada. Done that with the race gas rom, VP C10, new Dinan coils, fresh plugs and a K & N filter. The stage 2 tuned stock PWG turbo N55s really fall off in the higher RPMs and make peak power at about 5k rpm. So setting my shift points as low as possible or short shifting manually broke me out of the 13.0s and got me in the high 12s. Depending on my funds next spring I may do progressive meth and a custom tune or install a pure 500 turbo.

[@JohnsonMotorsports]

Sounds like you have a beast. I haven’t got any draggy times, but with my FrankenTurbo my car is definitely not falling off on the top end. I am still tuning but am carting 25psi to redline. I just fixed a fueling and actuator issue and will now get back with my tuner to up the boost.

[@DJ-lc1en]

Hey Grant nice video! Hey just curious what your rail pressure drops to on a wot run on ethanol? Thanks!

[@JohnsonMotorsports]

Depends on the boost. Right now I am working on adding a dual lpfp, because the low side pressure is dropping to low to feed the hpfp above 24psi.

[@sevenwawa]

how did you connect your android radio to the car that you can see all the temps etc.? did you connect by some program or obd connector by wireless? cause bluetooth connecting is locked i think in this units, am i right? :)

[@JohnsonMotorsports]

I run a custom MHD tune and have the WiFi dongle connected to the obd2 for my MHD gauges.

[@Zay18k]

Rear driver side bottom led doesn’t seem to sync with the rest of the lights in it car

[@focusmicro]

Interesting, my F11 LCI touring/estate 2015 doesnt have the acrlic in the door panel or led plastic housing.

[@arh9745]

any issues with these lights so far?

[@JohnsonMotorsports]

No, they’ve been great. One of the rear doors can seem to shift to a different color every now and then. You can see it in the video. I haven’t checked to make sure my wiring didn’t get messed up on that door. You can see it in the cenematic.

[@teknodogg]

How did you code it?

[@JohnsonMotorsports]

It doesn’t need coding.

[@mrut-ml1kv]

I have a problem with the connection, I received a 10-pin cable but the backlight does not work, my car is 2011, can you help me?

[@JohnsonMotorsports]

Have you reached out to RVG for help?

[@drifterzy33]

Hi, Please tell me if I see correctly: IDrive Module ambient Brown White Brown orange Orange Green Blue Red yellow Brown This is how it should be connected?

[@gordanivankovic7138]

Thats a good question.. i need that info too

[@Jordan-mv3ci]

Link for the product ?

[@freddieruger1]

🔥🔥🔥🔥🔥

[@AndreiAndrei-je7wi]

Thanks for video. So is plug and play this. You didn’t cut any cable?

[@JohnsonMotorsports]

This does take quite a bit of wiring, due to the door harnesses.

[@AndreiAndrei-je7wi]

@@JohnsonMotorsports Thank you very much for your reply. I was just curious if you had to cut any cables and make the connections or just What you show in video when you connect them . Thanks again

[@JohnsonMotorsports]

@@AndreiAndrei-je7wi I am pretty sure I showed all wiring and connections in the video.

[@barryblack7384]

, Excellent mod but that's complicated compared to most ambient kits that are available, mine took 2 hours all in.

[@JohnsonMotorsports]

Interesting. Did you wire them into the door harnesses?

[@stickerman2328]

Is this the ebay kit? May try install it and see how many things I break 😂

[@JohnsonMotorsports]

No, this kit came from RVG Performance.

[@joshdickson6938]

Is it distracting while you are driving?

[@JohnsonMotorsports]

Nope, I don’t thinks so. Plus you can still use the dimmer switch to lower the light level and even the memory buttons on the CIC to just set 1 color.

[@richiebay11]

Link pozz

[@ilmseed8200]

Amazing but way toooooooo much work